Conversion of win8 to win7

Similar Questions

• Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

  I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
  PCI\VEN_104C & DEV_8241 & CC_0C0330
  PCI\VEN_104C & DEV_8241 & CC_0C03

  Thanks in advance to anyone who can help

  Hello:

  This driver should work...

  Texas Instruments USB Controller Driver

  File name: sp70786.exe

• Portege Z930 - a few questions after decommissioning of Win8 for Win7

  Hello
  I recently bought Z930 PT234E with Win8 pre-installed. Due to the policy of the company, I needed this downgrade to Win7 Pro 32-Bit (deleted all partitions and creates a partition must usually be made). I downloaded all the drivers for the OS and installed. And it all started after that;

  1. I'm trying to install TOSHIBA Smart Client Manager but returns with warning "+ before starting the implementation of TOSHIBA Smart Client Manager Client, copy an action for TOSHIBA Smart Client Manager Server header file to the installation folder. +"and I only have the file and the installation will fail. * Where can I get this file for a successful installation? *

  2. you have + hwsetup + software preinstalled on Win8 but I couldn't find this sw / driver, even for Win8 to download Toshiba pages * where can I get this sw because it gives the possibility to configure the BIOS without waiting for start? *

  3. I see that the battery is + opportunity + while I left my camera on hibernation. I have to unplug it from the power supply after that 100% charged and Hibernate, it. But after a few hours, when I turn it on, I see that it is 91%! I susbect it's because of ' + sleep and fresh + "is enabled from the BIOS, but I need to wait for the next boot. * Any comment? *

  4-if I buy Toshiba online recovery support, this will help me to install Win8 as first boot and create the deleted partitions as in "+ * factory State * +". In other wprds, this recovery media will set my z930 to the State from the factory with the OS and partitions. + OK, I guess this media is a DVD and I know that I need to create a USB bootable for this media... No worries :) +.

  Really thanks for reading and the comments / answers :)

  > 1 - I try to install TOSHIBA Smart Client Manager but returns with warning "before starting the implementation of TOSHIBA Smart Client Manager Client, copy an action for TOSHIBA Smart Client Manager Server header file to the folder of installation." and I only have the file and the installation will fail. Where can I have this file for a successful installation?

  This file is not known to me and usually something like that should not appear if install you the software in the correct order.
  Before you start to install the Toshiba software you need to install the Toshiba value added for Windows 7 package!

  Only if this PPV was installed and restarted laptop, you can follow with other tools.

  > 2 - you have hwsetup software preinstalled on Win8, but I couldn't find this sw / even Win8 to the download pages where Toshiba can get this sw fly because it gives the possibility to configure the BIOS without waiting for the start?

  Driver package system that is available to win 8 is NOT available for Win 7.
  Instead of system driver you have installed to VAP!

  > 3 - I see that the battery is used while I left my camera on Hibernate. I have to unplug it from the power supply after that 100% charged and Hibernate, it. But after a few hours, when I turn it on, I see that it is 91%! I susbect because of the option "sleep fresh" is enabled from the BIOS, but I need to wait for the next boot. Any comments?

  Any comments? Option Charge & sleep, but also other options like the Wake Up LAN or keyboard may discharge the battery. So in case you n t want that, disable it in the BIOS

  > 4 - if I buy Toshiba online recovery support, this will help me to install Win8 as first boot and create the partitions deleted as in "factory condition". In other wprds, this recovery media will set my z930 to the State from the factory with the OS and partitions. OK, I guess this media is a DVD and I know that I need to create a USB bootable for this media... No worries.

  Yes

• Satellite L875D: USB 3.0 ports do not work after decommissioning of Win8 for Win7

  Hello

  I got my OS of Win8 OEM for Win 7 Home Premium because Win8 is just not for me... Its a legal version of Win7 with a product key, storebought...

  The laptop is a Satellite L875D-10N, which I bought in September 13.

  Installation went well, except that 2 3 ports USB 3.0 no longer works.
  I can stil fresh my phone or other devices, but the laptop is not "see". Also, USB drives and other storage devices are not recognized.

  In the Device Manager the ar two ports under "other devices" and no driver is installed for them.
  I tried in different ways to find and install a driver, but it never works.

  Can someone help me with this? I would be very much greatfull!

  Kind regards

  Wilbert
  Amsterdam, Netherlands

  > In Device Manager, the two ports are listed in the "other devices" section and no driver is installed for them.

  Indeed the USB issue seems to be related to the missing drivers.

  You must install this driver USB 3.0:
  [Driver USB AMD v 2.0.7.176 Windows 7 - 64 bit: http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct 7534 = & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 87792 & OSI D = 30 & driverLanguage = 42]

  In addition, you will need to make sure that this chipset driver has been installed too.
  The laptop supports the graphics chip ATI and AMD chipset. The chipset driver is the driver of ATI graphics card and this is why you must make sure that this driver would be installed too.

• Downgraded Win8 to Win7

  Hello!

  I buy HP pavilion 17-e004er laptop PC with Win8 pre-installed, but I don't like that operating system, office looks very ugly and impractical. Most of the programs and games that I use today do not work with this operating system, which allows buying a laptop is almost useless. When I reinstalled for Win7 I can't find drivers Ethernet Controller PCI device, SM Bus, video controller controller, Bluetooth, USB Universal Serial Bus Controller controller.

  Can you help me?

  Thank you!

  Hello:

  SMBUS controller. This must be installed first. Then restart.

  First install the chipset AMC driver and restart. You want the first file on the Web page.

  Who will install the smbus controller.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  To install the video contoller - PCI\VEN_1002 & DEV_6660, click on the video controller with this hardware ID, repeat the process of driver installation manual that I pointed out above and in the list of graphics cards, select the AMD Radeon HD series 8600 M graphics card list.

  PCI\VEN_10EC & DEV_8136: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  PCI\VEN_1814 & DEV_3290:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118589_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_1814 & DEV_3298:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118601_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_10EC & DEV_5229:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_1022 & DEV_7814:

  Download and install these two files:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

• WIN8 for Win7

  I just do an install of Win7 Home Premium on my Pavilion E5K58UA #ABA who had Win8 on it. I can't find drivers for the Realtek network adapter that work. I would love to find all the necessary drivers for Win7. I have to burn it to a disk to be able to access on the laptop, as the usb ports don't seem to recognize a USB key. Any help would be greatly apprecited.

  You are the very welcome.

  You must install the drivers for the rest of the items that do not work.

  For graphics, install the driver AMD Mobility Catalyst beta from the link below and then restart.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  USB 3.0: Install both...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Wireless:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118588_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Card reader:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3D driveguard:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4132&product=5396730&sw_lang=

  Webcam:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127341-1&cc=us&DLC=en&LC=en&OS=4132&product=5396730&sw_lang=

• Intel HD Driver issues to the decommissioning of Win8 to Win7

  Hi guys,.

  I currently have a bunch of machines Pro3500MT HP that came preinstalled with Win8 on them, and after checking with HP, they stated that their compatibility to be downgraded to run on Win7.

  The installation works fine up until the point where Intel HD drivers are installed and this causes the pc to BSOD with IRQ isn't equal error. (I'll add the dump shortly files)

  Has anyone had this experience with these machines?

  Hello:

  I've seen situations on the other business office HP PC where this occurs when you install W7 (no SP1), and then try to install the drivers before the W7 SP1 update.

  If that's what you were doing, the solution is to install W7, update SP1 before you install all the drivers, and it should work.

  If this is not your situation, then I would try the video driver Intel HD directly from Intel.

• change of Win8 to Win7

  I bought a laptop with Win8 installed 64.  It is not a touch screen. I want to erase Win8 and go with Win7 64.  What if any are the problems I have to face?  The processor is AMD E2-1800, 8 GB of RAM, 500 MB HD

  Erase the HD, then start the Win7 installation whatsoever?

  Thanks for the reply,

  When I asked about getting the drivers I was talking about the Win7 installation disc.

  Let me say it this way.  I do not return back to Win8 should install Win7.  That said, if I zap the HD, buy a copy of Win7 64 can I install and use this laptop?

  Microsoft does not manufacture nor supported (produce drivers/software for) your material.  If you want drivers that allow equipment of your machine and attached to your computer to communicate properly with any operating system, you choose to run, you must go the manufacturer of the components and get these drivers.

• Possible satellite Z930 - Downgrade of Win8 in Win7 Pro

  Hi all,
  I want to downgrade my Z930 Satellite of Windows 8 for Windows 7 pro.
  Is this possible?
  Y at - it all drivers for Win7?

  What should I do?
  I did 3 (DVD) system recovery disk, I can now begin the Downgrade process?

  TIA
  Holfit

  It is possible, why not

  To check this:
  http://APS2.toshiba-tro.de/KB0/TSB2B03F30002R01.htm

  You need to make the necessary changes in the BIOS. Disable secure startup, and then assign him to UEFI MSC mode

  > Are there any drivers for Win7?
  Look here:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  > I did 3 (DVD) system recovery disk, I can now begin the Downgrade process?
  If you have the recovery disk, you will be able to put the computer laptop back to factory settings.
  This allows you to use 8 to win again.

• 2000-2c29W HP: downgrade HP 2000-2c29W of Win8 for Win7

  I know I need to reformat the hard drive before installing Win7.  What else do I need to know for an installation without problem on this model?

  Thank you.

  It seems that the disc while it is formatted in NTFS is still in GPT and MBR format.

  Have you also convert the disk to GPT on the MBR?

  You can use this free bootable tool that is supposed to be able to convert GPT on the MBR disks then you can format the MBR disk with the NTFS file system.

  http://www.partitionwizard.com/FeatureList.html

• Can I downgrade Satellite C875-13F of Win8 to Win7 with the same license?

  I bought a Satellite C875-13F in hury with 8 to WIN, but I would go back to win7. Is this possible with the same license code?

  With greetings, Aart

  Hello

  Check out this Microsoft page to understand the downgrade right:
  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/downgrade_rights.aspx#fBid=6jf3dZU2VW0

  Windows 8 * Pro * includes downgrade rights to:
  Windows 7 Professional
  Windows Vista Business

  I think you win 8 and is NOT Pro... so you canoe downgrade... you must purchase a license for Win 7

• Control keys works do not, Win8 to Win7 downgrade. HP envy j011dx

  I have a HP Envy j011dx provided with Edition (64b9t) to the home page of Windows 8. I put in an SSD and improved RAM and installed Win 7 Pro(64bit). Everything is working great except control keys do not work.  When I hit the left ctrl key, I get [9 - and CTRL right, I get, l;]
  I have searched and tried a few different drivers looked at messages on the demotion to 7 and have not seen anything on this issue. I ran all the updates of windows and tried several different drivers. I put the old HD with W8, and it works if it is not a hardware problem. I looked at the origin of this post before doing the downgrade and it gave me the confidence to move forward with implementing Win7 on. I have until Friday to take this back to the store if I can't make it work. Any help would be appreciated. I also checked the region/language settings.

  I discovered what it was! Hallelujah! Good so I uninstalled and reinstalled Win7 Pro like 8 times. The driver IDT High - Definition (HD) is that he was causing.

  Finally, I noticed that when I hit the left CTRL mute volume was turn. Then when I hit the button Mute ctrl will work correctly. Mute on this subject would not work. Mute off it would work. I unsintalld the driver and re-installed several times to ensure that it is definitley the origin of the problem. Keys mute and volume were workign regardless if the driver has been installed. I was making reference to article http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Downgrade-HP-ENVY-15-j011dx-to-windows-7-need-help-finding/td-p/3768928 to get the rest of the drivers. WEIRD question but it is the IDT Audio, 1.0.6491.0 Version 6.10.6491 Rev: A SoftPaqNumber: SP4958 that was originally there. It's SP4958.exe. Whooo! It was a guy. I'm so happy that I found it. I like really a few Windows 7. Not looking navigation on Windows 8 and 8.1 at all!

• Laptop Pavilion 17 t: transfer the information from computer to computer Win8.1 Win7

  I now have a Lenovo computer Win7Pro laptop and I was looking for the best method to move the information from this device to the device to the laptop HP Pavilion 17 t. Win8.1 I looked at a lot of options on the Microsoft Community website, but too many people have had problems with them.

  Do you have any recommended method?

  Hello

  It actually belongs to you. I ONLY transfers the user data and settings such as bookmarks, email configuration.

  Kind regards.

• Can switch you from Win8 to Win7

  First, Windows 7 is an upgrade of Windows 8...

  I bought a Thinkpad T530 with Windows 8. Is it possible to wipe the Win8 OS and install Windows 7? And if so can I still get updates driver and stuff like that? What are the benefits and the thank you idiots

  Matt

  Welcome to the forum!

  It is certainly possible to abandon W8 for W7 and T530 is fully supported when it comes to drivers and applications.

  Personally, I don't see a cons - only cradle YMMV.

• Toshiba Satellite Pro R-50 b Win8.1 - win7

  Hi all

  I need help.
  My company sold a Satellite Pro R-50 b to a customer.
  This laptop has windows pro 8.1.
  The sale has been made with the option to downgrade from windows 8.1 pro to windows 7 pro.
  The customer needs to windows 7 because the 8.1 does not work with other software in its business.
  Now my question is:
  -Where is the possibility to come back? How can I do?

  I tried the 'hidden partition recover', but it still gives me an option: windows 8.1.
  The recovery cd = windows pro 8.1

  Any help?

  Best regards to all
  Luis Martins

  Hi Luis,.

  If it's a new machine, chances are that the laptop has been configured with a license (OEM) from the beginning and Windows 8.1: the machine then knows nothing about Windows 7.
  If the laptop is not was aligned for an upgrade of Windows 10 before July 29, this free option is is no longer available.

  If it absolutely must Windows 7 Pro (64 bit), I think you're looking at a new installation of W7. In this case, I would probably opt for a dual-boot configuration,
  leaving 8.1 W tact for the future, when the software uses your customer becomes 8.1/10 compatible with windows and Microsoft can lead to another case of upgrade.
  You would need in my opinion, a license key W7 Pro 'available' and a version commercial of the W7 Pro installation media, but who should not visa costs full price.

  All the best

  Jan Dijckmeester.