Copy questions

Similar Questions

• HP Officejet 8600 N911a copy questions!

  Whenever we use any aspect of the printer (fax, app Center, etc.)  I can get a full picture on the page printed; However, when I put anything on the glass plates to copy results out EXTREMELY light in ink or almost empty!  There is a NEW printer, bought and installed yesterday, August 9, 2012.

  Can you please check my problem post entitled problems Officejet 8600 N911a copy

  From: SforkMotelLacey

  Sent the: 10/08/2012-16:43

  Add SforkMotelLacey to friends Ignore the SforkMotelLacey

  I was hoping maybe you could take a look at my post and see if you can find out how to solve this problem, because it's the printer / fax / well all (blood of our lives) and we are a small MOM and pop motel owned (that I run for the family) and we NEED to go right for once! Please oh, please!

  OK, a little hurt a title...

  From: SforkMotelLacey

  Sent the: 10/08/2012-16:48

  Add SforkMotelLacey to friends Ignore the SforkMotelLacey

  Sorry this is to copy the questions no problems!

  Thanks again in advance

  Hi SfolkMotelLacey,

  The charger - automatic document feeder or glass to make copies?

• OfficeJet pro 8610: copy question

  I am aware of both a pages facing two options on back page. Now, I'm trying to figure out if I can copy two pages in front of two pages by using the Officejet pro 8610.

  Hello

  The HP Officejet 8610 does not support automatic double-sided copy of a centre but only duplex printing.

  The duplex is only available model 8620 or 8630.

  You can use the HP scanner software to scan document manual duplex print it to work around the problem.

  You can find the specifications of the product below:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/HP-OfficeJet-Pro-8610-e-all-in-one-printer?JumpID=oc_r1002_usen_c-001_r0002

  Shlomi

• HP officejet 4500 wireless - scan and copy questions

  I had to reformat the computer, so I reinstalled the printer. While she goes through the motions of scanning/copying, it does not scan/copy the image on the glass screen, but demonstrates rather empty. Any suggestions?

  Thank you.

  Welcome to the aharondavidforums.

  I saw your post on your Officejet 4500 scanning black images. You mentioned that the printer is also white image copy. Normally it is a scanner failure.

  I would like for you to try the steps in this guide to see if you get positive results:

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a nice day

• OfficeJet Pro 8600-COPY Question

  How to copy a page 2 faces on a page?  In other words, 2 face 2 face...

  Hello

  Please specify the exact printer model:

  The HP Officejet Pro 8600 (N911a) do not provide duplex ADF to scan a two-sided original, but only print double-sided.

  The HP Officejet Pro 8600 Plus (N911g) / Premium (N911n) however do not provide this feature.

  If your product is the Plus or Premium models, follow the steps below:

  In the main menu printer, click the copy.

  Double as original copy / 2 sides 2 sides and perform the copy job.

  Kind regards

  Shlomi

• HP Officejet Pro 8600 Premium copy Question

  I just bought a HP OfficeJet 8600 Premium.  I have legal paper in tray 2 and stationery in a status bar.  It can automatically select what size paper he needs or do I need to change it every time I have copy these items?

  Hi Vonnie52,

  If you happen to run across the following problem with tray 2 not detected on your Officejet printers, try the following steps that should help solve the problem.

  (1) turn off the printer

  (2) pull tray 2 completely out.

  (2) turn on the printer without 2nd tray

  (3) turn off the printer

  (4) install 2nd tray

  (5) turn on the printer

  Set the default tray to make Copies:

  Try the steps I provided below and let me know if this worked for you. My current setup for premium 8600 goes like this.

  Impression of the PC: Tray 2 is set as default Type on paper: plain paper

  Copy of the printer: Tray 2 is set as default Type on paper: plain paper.

  Tray 1 contains photo paper, tray 2 contains plain paper.

  This way when I print from the PC it always pull out tray 2 unless I select manually 1 tray to print photos. The same for Copies, when I make a copy he always starting from tray 2, unless I manually select to pull from Tray 1.

  Tray 2 as the default value for the copy configuration steps

  1. press on copy

  2. tap on settings

  3 change the Type of paper in paper-regular

  4 change Select tray 2 tray

  5 scroll and select set as new default.

  Press home to return to the home screen. Press copy, tap Settings and check if Select tray is always tray 2. The current version of the firmware on my printer is CLP1CA1136AR. You can check your firmware version by printing the printer status page in the Setup Menu.

• Question about processor and Windows. need to answer accrdingly to discription below. ?

  I use windows xp. on cpu 2.4, 1 gb ram and 256 of the hard drive. and I am aware of two pins in my processor is broken by the heat of combustion. the system still works fine. but the only problem that I face is that it takes 3 x the normal time to copy the data from the drive usb or vice versa...  This is: it is because of the processor broken pins to copy slow. and is there a way to solve via software system say avoid those specifice pins or some how? ?   Hopefully the issue is understandable. answer please...

  Pins broken on a processor and things still work, and your concern is slow copy?

  What is "thermal burning?  You can expand on how these pins really broken?

  There is no software (that I know) to "move" broken material as you describe.  You would be better to spend a little money to find a replacement processor or a replacement processor and motherboard that will accept your current memory, etc. MY HUMBLE OPINION.

  Is * only * the cause of your slow copy - questionable.  Save more explanation of what happened to the pins of the processor - I suspect there is other damage suffered by the system, you don't even know of which could cause slow best USB.  Something with the motherboard, possibly.  Specifically the same USB ports.

  I mean - you could back up everything, perform a clean installation of the operating system and see if it works better after loading the latest drivers form the manufacturers of hardware components in your machine costs and clean...  Otherwise - shot in the dark so that blindfolded and ignoring obvious cries of "stop, don't shoot."  * smile *.

  Side also - comment - if there is something wrong * everything * and you declare it here, the system * not * "are still working fine.  * smile *.

  --
  Martin Stanley
  --

• MMS of Smartphones blackBerry and copy of sent Messages questions

  Hello

  Got 2 questions abt my "BOLD".

  1. I noticed that the MMS option is not available on my "BOLD".  I bought the unlocked Australia Optus H/H and its use in the network of Telkomsel Indonesia. Telkomsel network has MMS ability but not sure abt Optus. If I go to the help and the MMS Inbox, I can open the file but for some reason it is not in my screen home or that the option available to the general public. How can I activate the MMS for the device?

  2. I did hide messages sent to the relative to the general Message Option NO. It serve my needs well for e-mail messages (he stop copy my sent messages). However, I need the registration message sent to my SMS text. Is there anyway I can turn on for SMS only and hold e-mails

  Thank you very much for the year Advisor

  1 - the MMS function is managed by your operator, not to the blackberry device, call your carrier and ask why you can't.

  2 - Nop, you can not, SMS are managed by the message Options too, if you hide in messages are you hiding in the SMS too

• A copy and one last question

  Hey I'm new to photoshop and I really enjoy it. My question is: can we copy the work of a layer and passed on an existing layer. Ive made order J, but that creates a new layer. I want to copy my diapers on a character animate model. There must be a way to do this and I would appreciate it if someone could guid me. Thank you I am

  You must make choices before the copy command, for example Select All (cmd + A)

  Another way:

  You can use cmd + J

  then you can merge down with the layer below: cmd + E

  for ex: cmd + j then cmd + E

• Copy to check the knowledge of the questions to the Quiz questions classified

  Adobe captivate 9

  I'm working on a project that the owner wishes to question to check knowledge 5 or more not classified after each of the 5 sections of the training.  At the end of the training, the owner wishes to rank issue.  I'm trying to find out if there is a way for me to simply copy the instead of recreating for the verification of knowledge (not rank) and again graded questions.  Any ideas?

  I'm afraid that no, there features built in and as you can see differences in the properties of Quiz Panel (you don't score, penalty, partial for KC slides, they are not counted in the Quiz system variables). You will need to recreate the KC questions from scratch, not the normal questions.

• Questions, try to copy the RGBA channels or grayscale in another RGBA file

  Older versions of photoshop allowed to copy the channels of a file to another easily, if I remember correctly, now I'll have questions. Copy of a channel of one RGBA file for another work, or a copy of a file to grayscale in a channel RGBA.

  Hi zakresh

  Please see: link double, split and merger of the channels in Photoshop .

  Let us know if that helps.

  Kind regards

  Mohit

• I bought Lightroom 3 and installed on my MacBook Pro via a disk. Later, I upgraded via web for Lightroom 5. My question is how can I install a copy of Lightroom 5 on my new iMac?

  I bought Lightroom 3 and installed on my MacBook Pro via a disk. Later, I upgraded via web for Lightroom 5. My question is how can I install a copy of Lightroom 5 on my new iMac?

  Download, install and activate...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Question: I have an album that I built in PhotoShop Elements and I want to copy it to a CD, DVD or memory key. I am using a Mac and have not been able to find out how to accomplish this task. Help!

  Question: I have an album that I built in PhotoShop Elements in a Mac. How it copy it to a CD, DVD or memory key?

  Click on the name of the album and use Cmd + A to select all the thumbnails, then go to the top menu:

  File > export as a new

  Choose the file type, the size and the quality of your copies and then click on the Browse button and navigate to your Media Player.

• Having a color changing the question when you copy and paste things into a new document

  Hello, I had a question about copying and pasting in photoshop (something I thought I'd be able to handle).  See the screenshots below:

  First with the move selected tool, I went to command + click on the dark blue model below to highlight and select its layer.  Then, in the following screenshot with the marquee tool, I was trying to copy a square piece of 100 x 100 px of the model.

  

  After hitting the command + c to copy, and then I opened a new document with the following and click settings on ok:

  

  I knocked and then command + v to paste what I had copied the new document that I created.  However, the part gets confused me is that the color of the background pattern that I copied and pasted is now a different color, as shown below:

  

  The glued color is obviously much darker than the original.  Anyone know what is happening here?  Very confused.

  Some how you have copied a composite instead of the layer + styles.

  Try this instead, select the layer as you did

  Create a new document as you did

  Use the move tool and drag the document on the tab of the new document with the mouse still down, drag your document down to the new document.

  Because your new document is set to 100 x 100 is what adapts the layer, so you should be good to go.

  If you still have a question of color or something has not transferred correctly let us know.

• From VM copied VMX: "this virtual machine has questions to answer...". »

  I'm trying to start a virtual machine that has been copied from a VM existing and created by initializing the vmx file under a new name of host of VM-comments.

  When you try to start the virtual machine I get the error: this VM has questions to answer

  Steps to generate VMS shown below:

  Buld VM:

  New-VM-name $TargetHostName - VMFilePath $TargetVMXDiskPath - VMHost $TargetVMCenterHost

  Change the name of the network for the network card:

  Get-NetworkAdapter - VM $TargetHostName | Together-NetworkAdapter - NetworkName "test18net."

  Start the virtual machine:

  Get - VM $TargetHostName | where {$_.} PowerState - eq "PoweredOff"} | Start-VM

  The error is generated:

  Start-VM: 23/08/2011-10:48:46 Start - VM VM that has questions to answer before the operation can continue.
  On line: 1 char: 77
  + Get - VM $TargetHostName | where {$_.} PowerState - eq "PoweredOff"} | Start-VM < < < <
  + CategoryInfo: InvalidOperation: (:)) [start-VM], VmBlockedByQuestionException)
  + FullyQualifiedErrorId: Client20_VmServiceImpl_WrapInVMQuestionWatchingTask_HasQuestions, VMware.VimAutomation.ViCore.Cmdlets.Commands.StartVM

  I went to the GUI and he asked me if the server was a copy or? (I forgot the rest of the options) I used the default answer of 'Copy of a VM' in the GUI and was able to use CLI to start the virtual machine.

  How can I autmatically work around the issue, or respond at the start of the VM?

  Only ks once again for all the help!

  Take a look at Re: how to keep or ignore the UUID when you power on a virtual machine

  This discussion addresses the same topic to answer the question if the VM was copied or moved. As to the significance of this issue, see http://kb.vmware.com/kb/1541. Basically, it is about creating a new UUID and MAC address of the VM (I copied it) or keep the same as the source (I moved it).

  André