OfficeJet pro 8610: copy question

Similar Questions

• OfficeJet Pro 8600-COPY Question

  How to copy a page 2 faces on a page?  In other words, 2 face 2 face...

  Hello

  Please specify the exact printer model:

  The HP Officejet Pro 8600 (N911a) do not provide duplex ADF to scan a two-sided original, but only print double-sided.

  The HP Officejet Pro 8600 Plus (N911g) / Premium (N911n) however do not provide this feature.

  If your product is the Plus or Premium models, follow the steps below:

  In the main menu printer, click the copy.

  Double as original copy / 2 sides 2 sides and perform the copy job.

  Kind regards

  Shlomi

• OfficeJet Pro 8610 X 64 8.1 win question over both sides of the pdf, Word Doc multi-page brochure printing.

  HP Officejet Pro 8610

  HP Envy laptop

  8.1 Windows X 64

  Printer will not print back of the pdf booklet by choosing the best quality.

  Get the message "Cancel printing" on printer when trying to print the second side.

  kicks then paper.

  In addition, printer does not multi make page print job when printing on both sides Word 2013

  document.  Stops at random page number, get message «Cancellation of print» print

  printer.

  Complete features uninstalled and reinstalled software by following the instructions

  by HP Support Forum's message dated 23/09/2014.  Problem

  There are still.

  Hey!

  So happy to hear that everything is in place and functional for again you!

  Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Better luck in the future and have a great day!

• HP Officejet Pro 8610: Printer paper mangles

  I bought a HP Officejet Pro 8610 a few months ago to use mainly for scanning and copying for a home business.  I could not get the printer to print a sheet of paper without deformation of paper and printing things on an angle.  I use paper nine of a ream of fees.  I tried to reload the paper, using less paper in the tray, using more paper in the tray, etc.  My main Canon printer has recently died, and now I have to be able to print business documents and controls on my HP printer.  Any suggestions?

  @Suepatpi

  Welcome to the Community Forum of HP.

  A few ideas

  ========================================================

  The printer may need to be aligned after you do not use as a regular printer for a long time.

  Problems print quality for the e-all-in-one printer series HP Officejet Pro 8610, 8620, 8630, 8640 and 8660

  Down 2/3 of the way through the document, find "step 4: calibrate the line break"-you want to complete it!

  ========================================================

  Belle is not usable equal

  The HP 8610 can care for the moisture content of the paper, or maybe the printer doesn't like the weight of the paper you are trying to use.  This is the simpler, more straightforward answer.

  Assuming that you selected correctly before the type of media in the printing preferences for the printer knows what kind of paper to expect and how to react - the printer is maybe not able to manage this particular test.  If this is the case, and regardless of the perception of the quality of the paper, there is no way to force the printer to accept this document.  It is not a question of "bad paper" - it is a question of how the printer sensors respond to the book.

  Beautiful paper is not always equal paper which is printed on each printer.  HP printers are not the only picky ones in the world.  All printers of high quality can respond to the report in this way.  You don't have to use paper HP, is told by the way.   Try different papers.  Place this paper somewhere cool and dry to store and try again later.

  ----------------------------------------------------------------------------

  Printing preferences

  If you have not already done so, you can set the media type in printing preferences.

  Setting the media Type tells the printer what kind of paper be expected; the printer sets the reels and the spring tension to pull the paper into the printer correctly.

  Printing options

  ----------------------------------------------------------------------------

  The case of the order of the missing pages

  You mentioned something in passing that might be important:

  You will use your OfficeJet 8610 to print checks.

  If printing of cheques requires a feature 'Page Order' of the printer, you may be interested in the following:

  Printing options

  See the entitled subject

  • Page order - front to back / back to front
  • • Option 1: Use the OfficeJet Pro 8600 driver

  ----------------------------------------------------------------------------

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• OfficeJet Pro 8610 do not print documents to MS Word

  Hello

  I am owner of an all-in-One 8610 Offijet Pro. It was working fine until this day. Suddenly he stopped printing MS Word 2007 documents. It works fine with other applications (Acrobat, Autocad, etc.).

  I've uninstalled and reinstalled the drivers several times, used HP difficulty application, used the application microsoft Fix, I tried printing on Office 2013, but nothing happens.

  Whenever I try to print a .doc I get a page with a code on it and another filled with dark horizontal lines.

  Hey @Fatalouch,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve printing problems that you are having with MS Word documents when printing to the printer all-in-one HP Officejet Pro 8610. I understand that you already have many of the recommended troubleshooting steps, and I thank you for all the information, including in your message. I'll suggest a few steps additional troubleshooting here. I know that you have already run uninstall it and reinstall your product several times, but please run the step-by-step instructions below:

  Step 1: Uninstall the drivers:

  Because you have not specified what operating system you use on your computer, I'll provide you with the document on how to uninstall properly. Please click on this support document and simply choose the operating system you are using. If you are unsure about what your operating system, refer to: what is my OS?

  Uninstalling the printer software

  Step 2: Delete the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Step 3: Reinstall the drivers:

  Please select the link below to download the appropriate printer drivers:

  E all-in-one HP Officejet Pro 8610 Printer series full feature software and drivers

  Once you download the driver package allow the download to run.

  1. The installer gets to 100% and then launch the installation screen
  2. Do run installation instructions step by step to reinstall your printer
  3. Once the product is reinstalled correctly, proceed to the next step.

  Step 4: Change of driver:

  Now that the correct driver is reinstalled I'm going you have change the pilot of another driver for the Officejet 8600 series which should solve this problem.

  Please select the following link for the driver: HP Officejet Pro Basic print and scan Driver

  1. Allow the driver to download it and run it
  2. Once extraction is complete the installer can launch, please close the window installation
  3. Go to your Start menu and in the "search programs and files" box type % temp % and click enter
  4. Once the Temp folder opens, click the newer 7z folder. It should include OJ8600 or OJ860 files in what it says.
  5. At the top of this file, you will see the path to the file. It may show something like "computer - local disk c-users appdata - local - Temp - 7z...'.
  6. Make a left click on the right side of the path of file at the top bar and everything should highlight in this bar. Then right click on the bar and copy the path of the selected file.
  7. Close the Temp folder
  8. Click on the start menu, then select devices and printers
  9. In the devices folder and printers, click with the right button on your Officejet 8610 and left click on printer properties
  10. Left click on the Advanced tab
  11. Left-click on new driver
  12. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  13. Click the "disk" button at the bottom right
  14. When the "Browse" window opens, simply right click in the path of the file bar and select "Paste" to paste the path of the file that we copied earlier. Click OK.
  15. When prompted choose the 8600 Officejet printer and click Next until the pilot add windows close.
  16. Under the printer properties window, select 'Apply' but do not hit OK
  17. Select the general tab
  18. Rename your printer in HP Officejet 8610
  19. Click OK

  Now, try to print from MS Word!

  Please let me know if the other pilot solves your printing problems. Should you still be questions be sure to meet with your operating system so that I can further steps offered. Good luck!

• OfficeJet Pro 8610: printer does not appear in the list

  After an update of Windows 10/diversion, my HP Officejet Pro 8610 is more listed in printers.  I tried to reinstall everything, restarting, disconnect, find printer can't find anything (the printer is right next to me).

  Help!

  Thank you!

  Hi@millermom,

  Thank you for the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  The printer is not detected after Windows update. Is this fair?

  I would definitely help.

  First, uninstall the old drivers installed in your PC by following the steps below.

  • Right click on "Start" and select "programs and features".
  • Find the option that the printer name and then click "Uninstall" on the top of the window.

  Restart the PC and download the latest drivers for the printer from the link below and install the printer. It should work.

  http://ftp.HP.com/pub/softlib/software12/COL51184/bi-124093-4/OJ8610_198.exe

  I hope this helps. Let me know to learn more

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• HP Officejet Pro 8610: HP 8610 - check printing order

  HE CAN NOT FIND 'SWITCHES' TO CHANGE THE PRINTING ORDER.

  Control Panel

  ... Devices and printers

  ... right click on the printer icon

  ......... Printer preferences

  NO option to change the order of printing on any tab

  QuickBooks Pro

  ... File

  ...... Printer installation

  ......... SHAPE: Check/cheque

  ............ Options

  NO option to change the order of printing on any tab

  This option existed.  What has changed?

  Deskjet 6980 driver is compatible with the Officejet Pro 8600 series (including the 8610) and provides the order of the pages, but also of the other missing features of the Officejet Pro driver 8610 including:

  • Order of pages
  • Resizing options, including the page scaling in percent or adjust.
  • County of copy (with Assembly option)
  • Image mirror (for printing T-Shirt transfer or stickers)
  • Watermarks
  • Tip of color (the color, Saturation and brightness, the individual sliders for CMYK tone)
  • Overspray
  • Drying time

  The Deskjet 6980 driver can be installed as follows (the instructions are for Windows 7, other versions would be similar): file devices and printers, click with the right button on the Officejet 8600, select Advanced, new driver, Next, properties of the printer, Windows Update, wait a while for the page to refresh, and then select the driver HP Deskjet 6980 (HP), OK.  It may be desirable to change the name back to Officejet Pro 8610: right click on the printer, the printer, the general properties, type the name of the desired printer, apply.  While, it may be necessary to activate the duplexer: click the device settings tab, set the duplex unit installed, apply, OK.

  Install another printer driver will have no effect on scanning applications.

• HP office jet pro faces adaptation on a HP Officejet Pro 8610 8610:2

  I have an original side 2 and want to copy of side 2.   How can I get this printer 8610 to make two copies of faces from the automatic document feeder?  The printers menu window only has: selections for "copy 1 original side 1" GOLD "copy 1 original side 2 side.

  What so I have a side 2 original and copy side 2?

  I have the '2 accessory faces of printing"attached and printed 2 sides original of the computer to the printer for a copy of the 2 sides.

  Any help/direction will be gratefully received-thank you

  Hello

  The duplex is not supported by the HP Officejet Pro 8610. automatic duplex printing is supported only for this model.

  The HP Officejet Pro 8620 provide this type of functionality for this series, not the 8610.

  Kind regards

  Shlomi

• HP Officejet Pro 8610: HP Officejet Pro 8610 does not recognize ink cartridges

  My printer has ceased to recognize its ink cartridges. In a first stage, the problem happened occasionally and could be fixed by installing and reinstalling the cartridges or just wait a few days, but now it is continuous.

  When I turn on the printer, it immediately gives me an error (without code), saying that it cannot find the cartridges. All four are marked on the screen as not found. I followed the instructions of troubleshooting here: http://support.hp.com/us-en/document/c04090902

  The cartridges are genuine, they are the ones that came with the printer. I removed the, checked the contacts of the four. They look damaged or dirty, but used a cloth to clean all anyway. Put back them, did not help. Checked the latch, it was in the correct position. I even tried the restart without result.

  I tried to replace the cartridge with a new one (again, product HP genuine), but does not replace the printer either. And because all cartridges have failed at the same time, I can hardly belive the problem lies in them.

  I come from Finland, and I've not found a phone number, I could ask for help. Does one exist even for my country?

  Hey @Leathert,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8610 e-all-in-one printer does not recognize the cartridges. I could help you with that, but it seems that you have already found the HP document that will guide you in troubleshooting. Instead, you can contact HP (in Finland) support by clicking this link.

  I hope you get your sorted question and I hope you have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• OfficeJet Pro 8610: Won't auto answer

  Everything tonight.  We just purchased two HP Officejet Pro 8610 and has set up in the office, however, we found that even though we have activated the auto answer feature, or machine automatically answers.  Instead, they always ask a manual "Yes, go ahead and answer this question" a key that does not work for us because we have not often the people around these machines.

  Running a Test Fax report I got the next to a print to...

  Fax hardware Test: PASS

  Fax machine connected to the telephone wall jack Active: PASS

  Telephone cable connected to the appropriate Port on the Fax: PASS

  Using the phone cord with the Fax Type: PASS

  Tone detection: PASS

  Fax Line Condition Test: PASS

  Language: English

  Country/region: USA

  Auto answer: on

  Rings before answer: 2

  Fax paper size: letter

  Tone or pulse composition: composition of tone

  Volume Fax: soft

  Distinctive ring: simple Cycles

  Availability of recomposition: Redial

  No response recompose: no reminder

  Automatic reduction: on

  Backup Fax reception: on

  Error Correction mode: on

  Fax speed: medium (14400)

  Fax transfer: Off

  Communication error Redial: Redial

  Our header and the number have also been defined.  Right now I guess I missed something in the user manual, as is the case with the machines.  Maybe someone knows of what I missed?

  Hi RandyT9,

  I think it's related to distinctive ring setting. Have you tried to put the distinctive ring for all the rings feature and see if the printer can automatically respond?

  If you are using distinctive ring service, please refer to the user manual on the distinctive ring setting.

  If you don't use a distinctive ring service, make sure that the Distinctive Ring

  function of the printer is set to all rings.

  Hope this can help.

  Kind regards

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• OfficeJet pro 8610: print labels avery

  just started using my officejet pro 8610.  love it but I can't seem to aline sheets of labels when I print multiples.  When I print 3 copies it will make good on the 2 / 3. I have the tray loaded with about 50 sheets of paper of reg and then ask my sheets of labels above.  Have I not it overloaded or what.

  Hello pauldc,

  Welcome to the HP Forums.

  I see that you experience a problem when you attempt to print more than 3 pages of paper for labels at the same time.

  You said that you have plain paper in the status bar, as well as the label paper.  Please delete.  Use just the label paper when you print labels.  It would be the same scenario that you were printing photos and using photo paper.  Remove all of the regular paper.

  If you still have questions or if you have any other questions, feel free to write me again.

  See you soon,.

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.

• OfficeJet Pro 8610

  Can I plug my Officejet Pro 8610 into a surge protector with multiple sockets or must it go directly into the wall jack as was the case with my previous printer a 8500?

  Hello

  You can try to hook the printer through a surge protector and to verify it works, however if the printer would not get enough power it can cause different issues such as the quality problems with the unit sanner (for example during copy, scan or fax), the error message of false as a jam of transport, network of stability or power problems problems such as no answer while pressing the power button or "standby mode".

  If you experience these issues, it will be essential to connect the printer directly to a wall outlet and it is always recommended to ensure its implementation by my experience.

  Shlomi

• HP OfficeJet Pro 8610: HP Offijet Pro 8610 and retractable edition

  Hello

  I have a question about printing and adjust it.

  I have an image that I want to print, and it is great.

  I have 2 printers an epson and an officejet 8610.

  When I print on my Epson printer, the image is shrunk and print everything on one page.

  But each big image that I try to print on the 8610, it prints some parts of the image to other pages.

  I'm no shrink to adjust option in the settings of the printer and my programs are already developed shrint to print.

  So, how to activate or find the shrink to fit on the 8610 printer?

  I have instant ink if I want to print on the 8610, but since it prints on several pages, it must continue to use my Epson currently.

  Your help would be greatly appreciated.

  Thanks in advance

  Fred

  Hi @Grenpara,

  Thanks for joining the Forums of HP Support with your print request.

  I understand that you use a HP Officejet Pro 8610 e-all-in-one printer with a Windows 8.1 computer and you try to print a large image file, but there is no scale to move page or reduced to fit option so the image is printed on several pages. I would like to help with that.

  What program you are trying to print from?