Corruption of weird code

Similar Questions

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Vista Ultimate does not start: c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  All of a sudden I started my laptop and Windows does not load.  I received a message "failed to nobulate".  I searched in the help forums and found that I could create a boot CD (because the OS came preinstalled on Dell INspiron 1720 laptop computer).  I tried to perform a Startup Repair 11 times.  The repair details show:

  Boot critical file c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  I also tried to visit the advanced repair and selecting to restore from an earlier point in time, but I relieve error that no previous points are detected.

  Help, please!  I '; ve been against a week and need back up and going.  Thank you!

  Sue

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon

  Mick Murphy - Microsoft partner

• weird code

  weird code appears when I connect a code ' hercules dualpix hd720p for notebooks "96120 which can make

  Means that the device driver has not been installed successfully

• OBIEE 12 c - interested cannot check in because it is corrupt. Error code = 1

  I can't install OBIEE 12 c, when I start the installer of tit to the file "fmw_12.2.1.0.0_bi_windows64_Disk1_1of2.zip", I get the error 'could not extract archive because it is corrupt. Error code = 1 ".

  
  

  I tried to re - download the file, extract with the tool built-in Windows, with WinRAR and 7zip. Any other ideas?

  This is a new installation of Windows Server 2008 R2.

  Hello

  You should both extract of the archives in a catalog

  fmw_12.2.1.0.0_bi_windows64_Disk1_1of2.zip

  fmw_12.2.1.0.0_bi_windows64_Disk1_2of2.zip

  

  Archives of the second is no need to extract (!)

  and everything works)

• Satellite Pro P100 - 465 Vista: of DVD player may be corrupted or missing (Code 39)

  I just bought a P100-465 pre-loaded with Vista Business, it was working fine and I managed to load the DVD player software.

  However, the second day of use, the DVD player has dropped off and in the device manager tells me that Windows cannot load the device driver, it may be corrupted or missing. (Code 39)

  When I check the details of the pilot, I have the last version loaded and Vista cannot find another update.

  This before with Vista on a Toshiba Qosmio. What is my dosage?

  Hello

  A question: why you n t use the option to search the forum to find discussions that could provide useful information?

  I used this option and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  You will find a link to the Microsoft page that explains the problem and a solution

• Satellite Pro A120: Corrupt registry - error code 19 Device Manager

  I have a Satellite of A.120 Pro I am trying to charge my Creative Zen Sleek MP3 on it but keep getting a Code 19 registry is corrupted message in the Device Manager. How can I fix it

  Hello

  After a short investigation in the Microsoft Knowledge base, I found this description of the error Code 19:

  ---------------------------------

  Code 19:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.
  To resolve this problem, you can first try running a Troubleshooting Wizard.
  If this does not work, you must uninstall and reinstall the hardware device.

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Try these options:

  On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard. Click on uninstall and click Scan for hardware changes to load a usable driver. Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

  --------------------------------------------

  I hope this steps will help you!

• Equium L20: Lost CD/DVD drive - driver may be corrupted or missing (Code 39)

  I just lost the driver POINEER DVD - RW DVR-K16S. For some reason, it's a troublesome TI since im doing a computer course, I've been online and can not find the driver at all, I tried also to update via Windows and nothing. "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  This is the message I receive via the Device Manager. Any help or pointers as to get this driver greatly desired. I can load the driver myself i just have to find it. The driver disappeared after apron anything malicious on a CD.

  Thank you very much

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  It should work! ;)

• No sound on Equium - driver corrupted or missing (Code 39)

  Hello

  My name is Fanta.
  I recently wanted to play music on my computer using windows media player, but no sound from the speakers of the laptop, I checked the Device Manager and there is a sign less next to the audio, video recorders and game when I scroll it is a yellow circle with an exclamation mark next to the audio device «Microsoft kernel wave mixer» When you try to play music my windows media player 11 it is said
  "Windows media player cannot play the file because there is a problem with the audio device. There may be no audio device installed, it can be used by another program, or it might not work properly ".

  When I try to uninstall the device and then analyze installed again it gives me an error message
  "Windows cannot load the driver for this device for this device, the driver may be corrupted or missing. (Code 39) »

  Is it possible that I can do my speakers work again if so how?
  Thank you Sam

  Hi Kamal,

  If you had a tools and Utilities CD that came with your laptop then I suggest that you check to see if it contains the necessary drivers and utilities to support for your sound card. Alternatively, you can be able to download the forms from the download from Toshiba site. You will need to specify the number of the correct model for your laptop.

  Kind regards

• Satellite A210: ODD does not work - driver may be corrupted or missing - Code 39

  The STRANGE ('TSSTcorp CDDVDW TS - L632H ATA Device") does not work on my laptop more.

  In Device Manager, the Properties dialog box says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  laptop: A210
  OS: Vista 32 bit

  I think the material is OK, as I install dual-boot linux, the STRANGE works very well under linux.

  I found updates of firmware STRANGE on the Toshiba site, but these cannot be installed with the drivers dysfunctional.

  Is it possible to find the drivers somewhere? (I can use google, but I don't know if driver download sites are trustworthy).

  Any other ideas?

  Hello

  This has been discussed a lot of time here;
  The workaround is;
  -remove the ODD of Device Manager
  -access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop

  Good bye

• I can't read a disk in my computor what can happen in the properties of windows cannot load the driver for this hardware device, the driver may be corrupted or missing (code 39) can anyone help

  I went to put in a cd to look and he wanted to get on-screen computor Ive seen it before, but for some reason any it stoped working. I went on a local drive Q and click with the right button to open it, but then it reads that q:\ is not accessible. access denied

  Hello

  1. on what application you are trying to read the disc?
  2. don't you make changes to your computer because of which the question began?
  3. is the relevant question to a specific application or a disk?
  4. what operating system is installed on your computer?

  There are many causes of Code 39 errors:
   
  * A required device driver is missing.
  * A required binary file is corrupted.
  * There is a problem with the file I/O process.
  * A pilot that refers to an entry point in another binary file cannot load.

  If you use Windows 7, we will first open the convenience store hardware and devices to perform automatic troubleshooting services.

  You can also click "Run now" to this article and check if this is useful.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Device driver Matshita DVD - RAM US890AS corrupted or missing (code 39)

  My DVD player does not work and I get the following when I try to update the driver: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).  Any suggestions?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the links and check out them.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

• Peripheral CDDVD corrupted or missing (code 39).

  IM really hoping that someone out there in PC-land can help!

  I have a problem with my CD/dvd-rom drive.

  "TSSTcorp CDDVDW SH - S203N ATA installation" when I bought my PC has the yellow on her triangle when I access my device manager.

  the driver provider is "MICROSOFT", but because the software has been installed in "MESH COMPUTERS" they cannot help me find a solution!

  the device status says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  When I try to "Update Driver Software" for this unit and research online, I get a message that reads "best driver for your device is already installed, Windows has fix6 software driver for your device is up-to-date."!

  If I could solve this problem without any purchase of my PC works ALMOST perfectly for the 1st time in 2 years, I bought there!

  Help me!!

  Cheers.

  Select this option.

  Try the steps listed in this article in the Microsoft Knowledge base.  Previous post: the results (good or bad).

  http://support.Microsoft.com/kb/314060/NL

• my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

  drive is Matshita DVD-RAM UJ-850 s a SATA drive

  I use windows Vista

  Driver provider Microsoft

  Day 21/06/2006

  Version 6.0.6002.18005

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• WEIRD (code 39) on the A200 Satellite disk error

  TOSHIBA Satellite A200-130, Vista Home Edition, DVD RW TS-L632D (Samsung).
  Driver not installed (id code = 39).
  When trying to install the driver, Vista says: "OS sees no need to install driver.
  What is the problem?

  Hello
  If you use the code 39 as search terms on this forum you will find the solution for this problem.

  In any case try please to fix it by using the solution described on http://support.microsoft.com/kb/314060/en-us

  Bye and good luck!