Costum MCU Conference welcome/PIN screen

Similar Questions

• BlackBerry Smartphones PRIV begins beeper PIN screen on reboot

  I have a 4-PIN number on my PRIV. Sometimes in the night the PRIV will restart (probably install updates, I guess) and after reboot, it will ask for the PIN before it starts up Android (which is normal). My question is after 2 minutes of PIN code screen, PRIV start beep, probably let me know that I need to enter my PIN code before that Android will start and I can receive messages, phone calls, etc. Is there a way to disable this beep? I could doing at 2:30 in the morning!

  Just to add more detail, once the PIN screen appears, it beeps after 2 minutes if there is no entry. It emits a "tick" sound every 5 seconds approximately. Once you pick up the phone and press any button, it stops.

  Thanks, your idea works! It is possible to disable the PIN before starting Android while still requiring a PIN before you can access the phone. Here's how to change the setting:

  -Settings

  -Security

  -PIN screen lock

  -(enter your PIN code)

  -PINE

  -Don't select 'Thank you' instead of 'Require PIN start the device'

  -Press to continue

  -Enter your PIN and press next

  -Enter your PIN again to confirm your PIN screen and press OK

  You're golden!

  So to confirm, it will not be asked to enter a PIN to start android, but you still need to enter your PIN to access your phone as usual. And you won't be awake more by phone reboots early in the morning!

• MCU Conference Ad Hoc autodisconnect

  Hi all

  Is it possible to disconnect all participants of remaning an ad-hoc conference created by multiway after anyone, that create, to leave the Conference?

  Scenario is a person create a conference multiway between 3 conference rooms and after awhile leaving the Conference.

  I need auto disconnect other 2 participants.

  Is this possible?

  MCU used: 5310 - version 4.4 (3.67)

  Best regards

  Mesut

  Mesut,

  The only way you could do it is by combining the creator of the Conference that the President and the other participants as guests. It is not possible to distinguish between the Chair and invited in multiway.

  If you add the conductor, it would be possible in the next version with the use of pins different for president and invited.

  Adam

• When trying to activate the welcome login screen, error message "client for netware server disabled."

  Original title: how to pass the login prompt Classic at the Welcome screen to logon for windows xp professional

  WHEN I TRY TO ACTIVATE THE LOG-IN WELCOME SCREEN, I GET THE MESSAGE "SERVER FOR NETWARE CLIENT HAS DISABLED ABILITY TO FIX THS PROBLEM UNINSTALL"SERVER FOR NETWARE CLIENT"IS THE ONLY CHOICE THAT I COULD FIND ON DISABLE NOT UNINSTALL."  Help, please

  Hi BobbyQE,

  Follow the steps in the article.

  Error message when you try to turn on welcome screen or Fast User Switching

• Define a user account already but every time I start my computer the Welcome / logon screen does not appear.

  Original title: user account number.

  I've set up a user account already but every time I start my computer the home / log on screen does not appear

  Hi willy79,

  How many accounts do you have?

  You can check if the Welcome screen is enabled in your computer.

  For more information, refer to this link: to turn the Welcome screen on or off

  Hope the helps of information.
  Please post back and we do know.

• Welcome Delay screen - SOLVED!

  I installed and activated my Windows 7 Ultimate x 64 on my laptop. The official release. When I installed it worked perfectly, duration of boot time was about 35 to 45 seconds (measured with the event viewer). Then I installed the drivers for my PC. After you install the drivers, I noticed that the boot was much slower, and after system reinstallation and drivers about 10 times and some research on the web, I discovered that the problem was my graphics card driver, which was built in Catalyst Control Center, software that has been developed for editing the settings of graphics card , which I don't need (I'm sure that Catalyst Control Center delayed because the other drivers did not affect display welcome screen and startup time - after I installed them start time was almost the same). So I installed system and the drivers 11th time in a row without Catalyst Control Center and it worked fine. Boot time was about 50-60 seconds, and I was very satisfated. After that, I had a few problems of configuration of Windows Update, so I had to reinstall the system and the drivers again. I did, and the delay of the Welcome screen happened again. I have to wait 20-30 seconds, I watch "Welcome Screen" before displaying the desktop whenever I turn on my PC. Duration of start-up time is sometimes more than 120 seconds.

  Before every installation, I formatted my hard drive 150 GB (c) (I don't know if formatting hard drive can affect startup time). As I said, the hard drive has been formatted more than 10 times. I used the Disk Defragmenter and % fragmented partition was 4%. After defragmentation, it is again 0%.

  During the last installation of windows 7, I deleted all my hard drives, made a new and formatted it (465 GB). After you install windows on this hard drive, another problem that has happened. Another delay. Before displaying the home screen, the screen on laptop goes empty for 5 to 10 seconds. I reinstalled the system and the drivers again and nothing has changed. (I used the new Disk Defragmenter; fragmented % was 3%, now it is 0%).

  I tried this to solve the problem:

  1 fixed start using the Windows 7 installation disc

  2 tried Microsoft patches for this problem, including this one: http://support.microsoft.com/kb/977346?wa=wsignin1.0

  3. disabled all unnecessary startup items in 'msconfig' (only things that are always running are: avast!) Antivirus, Synaptics pointing Device Driver & Intel USB 3.0 Monitor - they caused no delay, because after having them out of time is always there).

  4 opportunity: disc Defregmenter, disk cleanup, System File Checker (System File Checker has found no problem).

  Here is the Configuration of my PC:

  Laptop: Toshiba Satellite C855 - 12K (PSKCEE)

  The system version: 6.1.7601 Service Pack 1 Build 7601

  Processor: Intel (r) Pentium (r) CPU B960 2.20 GHz, 2200 Mhz, 2 Lossnay, 2 logical processors

  RAM: 4 GB

  Graphics card: AMD Radeon HD M 7610

  PS: Sorry for the long description. Please help and ask for more information if you need. I hope that this problem will be solved, thanks in advance.

  SOLVED!

  Finally! Surprisingly, the gist was: DISK DEFRAGMENTER.
  As said above, I've already tried Disk Defragmenter, and it does not seem useful. But when I ran the last time, he behaved in a different way. When I tried for the first time, I analyzed my Local disc (c :)) (button "analyze"), fragmented % was 4%.) After that, I pressed "defragment". Disk Defragmenter does this:
  1. analyze;
  2 defragmentation;
  3 consolidation.
  Full process is completed with 3 Pass.
  The last time I ran, it was different. He did:
  1. analyze;
  2 defragmentation;
  3 resettlement;
  4. building.
  Entire process ends with 9 Pass. He also took a lot more time to complete.
  Thanks for the reply anyway. I tried some of your tips.
   Method 1: in my case, there is no computer is infected with the virus, because all of the hard disk has been reformatted completely several times.
   Method 2: has not tried, because I had some bad experiences in the past.
   Method 3: is not at all tried, I don't know if it helps.
   Method 4: I have tried it already, I notice no improvement at boot time.
  From my experience, there is something that I'm (not) proposing.
  1. Startup Repair of the system installation disk. In my case, it was not useful, he has even worsened Boot Time. After I had it ran, another bad thing happened: after "Welcome Screen", there is a small screen black period, before the appearance of the office.
  2. important and useful thing was Disk Cleanup. After I had it ran, I noticed a slight improvement, not only at boot time, but in the overall performance.
  3. be careful when you install the drivers. When I bought my laptop, there is too much unnecessary drivers. They take a lot of RAM, slow start-up and overall performance.

• No screensaver Windows 7 welcome/login screen.

  Hello everyone, I just installed Windows 7 Professional 64 bit and I noticed that once the computer is turned on and sitting in front of the Welcome screen (there are 3 users on this computer), it will continue to show that the screen and never go to a screen saver. I used to have Vista and I remember he possibly commit the screensaver, even in the Welcome screen, but so far on 7 I have not seen that happen. Anyone know if this is normal or if there are some parameters that can be modified in order to implement? I found an old article on these settings in XP and Vista, however, the registry string it references does not appear in the registry 7. Any help would be appreciated.

  Hello

  You can activate the screen saver of logon by adding a few registry values.

  One of the problems that you have is that Direct3D support is not enabled on the login screen, which means that you cannot use any of the stock of Windows 7 screensavers.  With this in mind you can download any of your choice on the web or enter logon. File SCR to a Vista machine.  The file will be in C:\WINDOWS\SYSTEM32 - copy it to the same location on your Windows 7 machine.

  Now, open the registry editor and navigate to HKEY_USERS. Default-Control Panel-Desktop

  Under this key, create the following REG_SZ values...

  SCRNSAVE. EXE = C:\WINDOWS\SYSTEM32\LOGON. SCR (or whatever your file is called).
  ScreenSaveActive = 1
  ScreenSaveIsSecure = 0
  ScreenSaveTimeOut = 60 (or whatever the desired delay in seconds)

  What is - this - you will have your screen saver to the logon screen.  If you need help made me know in the comments section below.

  I know that I'm not editing the registry here talking and I assume that you know how to do it.  If you haven't, let me know and I can send you a. REG file for example which will do that for you.

  I hope this helps!
  Jon

  http://www.insidetheregistry.com

• While trying to connect to my account welcome/login screen freezes. I don't face the same thing with other accounts.

  Original title: the Welcome screen problem.

  Hi all.

  I recently encountered a problem with my registration in my profile of windows 7.

  I start up my computer, and all seems well until I try to connect to my profile. He goes to the Welcome screen and stays there. He made no progress still do it. When I connect to other profiles on my mobile Samsung NP300V5AH, they proceed without a hitch. I don't know what the problem is, and I would really appreciate the help.

  See you soon.

  Hi Aden,

  Thank you for posting your request here in the Microsoft Community and we appreciate it.

  This issue may have caused due to the profile of the user related issues. I would like to know some information about this problem so that we can help you further.

  1. do you get any error code or error message while starting?

  2. the question facing you with the administrator account?

  3. have you made changes on the computer before this problem?

  I suggest you try the procedure described in the following article from Microsoft Help to fix the corrupted user profile and check if it helps. This article consists of the steps to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  What is the related issue of programs, this might have caused due to files corrupt in the administrator account. I suggest you try to fix the corrupted user profile and check whether or not this is also corrected.

  You can also try the steps in the following Microsoft Support article and check. This article consists of the steps to troubleshoot issues when Windows freezes or crashes.

  http://support.Microsoft.com/kb/2681286/en-us

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Please reply with the status of the issue so that we can better help you.

• By TMS MCU conference number

  Hi all

  We recorded with vcs several MCU Standing Conference, the source of the telephone directory of endpoint is TMS. I am able to discover and manage all the end points of TMS.

  How to display the number of MCU Permanent conference on endpoint through TMS telephone directory? So that users could dial into permanent conference of the directory itself?

  Currently, I have discovered all the endpoints of TMS and its appearance on all telephone directories of endpoint.

  Thanks in advance!

  Bobby

  Hi Bobby

  Create a new source 'manual list type' less manage sources of the telephone directory. Save and add a contact. Type the conference name, add it.

  Now click on the add contact method and write the address you use to dial the Conference. SIP or H323, (E164 alias is H323)

  Save it and go in manage inventories, create a new directory and connect the source you just created. Then click on set on systems and select all the systems you want to see this directory. And save.

  Every endpoint should now be able to compose this conference through the phone book.

  / Magnus

• Cisco VCS and MCU - Conference does not

  Dear community members

  I have problems in the VCS configuration to work with the MCU to join to several endpoints in a conference. The components that I use:

  -Cisco VCS control v8.7.

  -Cisco 5300 MCU 5310 v 4.5 (1.72)

  -3 x SX20 end points

  I recorded every endpoint and MCU on VCS, but I'm not able to do a conference call 3-way, the only option is 1 video and 1 audio (I disabled the Multisite option). It seems that VCS does not yet call the MCU in the game.

  Kindly help us with it.

  Can you tell us how you set up the Conference and how you have configured MCU and endpoints?

  From the sounds of it, you call each end point of one of the SX20s, but you must call simply directly in the Conference on the MCU.  If you want to have a conference point to point between two end points and then degenerate into a multipoint conference on the MCU, you must configure Multiway.

  With the help of Multiway with Cisco TelePresence systems

• Conductor create no MCU conference

  Deployment:

   CUCM 10.5 MCU5310 4.5 Conductor XC3.0.2

  I have a CUCM - conductor - MCU deployment and I am trying to set up the Conference date. I can call from end to bridge conference and point, by a busy year and the conductor I see the following:

   2015-03-02T17:27:02+01:00 conferencefactory.controller: Level="INFO" Event="An incoming call request has been rejected because the conference is not present." Conference_name="991115.my.meeting.alias" Destination-alias="[email protected]/* */" Detail="Can not create a scheduled conference. Scheduler must create conference before it can be used" Requester_(VCS/Unified_CM/client)_address="10.10.10.6" Source_protocol="SIP" Unauthenticated_source_aliases="[[email protected]/* */]" UTCTime="2015-03-02 16:27:02,99" 

  I see on the call history

   B2BUA rejected call on the Ingress with 486 Busy Here (Policy lookup response)

  On Journal MCU and Traces SIP I see nothing new, but on the driver of the Conference Bridge status is fine

   MCU (No description available); TelePresence MCU Enabled, Active. Utilisation: 0%

  No idea what could be the problem? i thing conductor to MCU something isn't good.

  Your question would be more place in the section of telepresence to the forums where these devices are more actively discussed in the conferences section you have posted in.  You can move your discussion by editing your message and change the categories at the bottom.

  It seems that you have either the Conference alias or the defined template to not allow incoming calls create the Conference, which means that only a planning as TMS application can create the Conference using the API of a conductor.

  Check the following in the conductor

  • Conference models > [model] > at the request of conference
  • Conference alias > [aliases] > Conference to create

  Also, sometimes people forget to have encryption enabled on the MCU and configured the MCU for the driver to use port 5061.  Which can also cause the Conference to fail.

• Cisco TMS assigns a numeric ID for the MCU Conference Scheduler

  Hey Cisco

  I create a conference planner tms 14.6, the Conference is to create, but the digital ID is not available until this conference began.

  picture attached

  I need see digital ID before.

  I've not being updated to 14.6 TMS, but in 14.4 and I'd be surprised if this had been changed to 14.6, you can specify a system to switch to the MCU, in which case the address is displayed as below in the screenshot;

  mcu2.gif

  

  or, you can find the address by locating the Conference in the conference control center, then place the cursor on the MCU and you should see a small window showing all the relevant address, as seen in the screenshot; below

  MCU.gif

  

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• a way to move c90 to 5320 mcu Conference

  I have a setup where we use the multi-site c90 option. Is it possible to move a video conference live from c90 to 5320 mcu. The reason is that there may be a 5 attending the video conference and c90 can handle 4 (3 + himself). I don't know if one needs for 5 participants before the video conference begins and I have no port on the 5320 MCU to run all the video conference with this

  Does anyone know a solution to this?

  Best regards

  Jesper

  Check:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC6/api_reference_guide/codec-C90-API-reference-guide-tc62.PDF

  
  xCommand Call UnattendedTransfer
  Transfers an ongoing call to another participant. The CallID is returned when the xCommand Dial command is run. During the call you can run the xStatus Call command to see the CallId. Fully supported for SIP calls only.
  Requires user role: USER
  Parameters:
  CallId(r): <0..65534> Number(r):
  Example:
  xCommand Call UnattendedTransfer CallId: 2 Number: [email protected]/* */ com
  *r TransferUriResult (status=OK): ** end
  

• Join the public network through the firewall option MCU Conference

  Hello world! Lately, we have a goal to jabber (without vpn) of internet users to join conferences within our network. Our telepresence infrastructure includes VCS, MCUS and endpoints (MX, SX). I discovered that MCU (4505) has a feature called video firewall option (under license). My question is whether it will be sufficient to achieve our goal? I've also heard that VCS expressway is used. What is the difference between these two?

  Firewall MCU option just the second NETWORK card, so you can have one with a public IP address and the second with a private IP address (essentially NAT'ed), and the internal and external clients will be connecting to a virtual meeting room common pre-configured on the MCU.

  The VCS-E (Expressway) works in tandem with your VCS - C to offer secure firewall courses. VCS - C is located on the inside of you firewall and the VCS-E is normally in the demilitarized zone.

  This allows, among other things, external systems to call your systems using H.323 and SIP URI dial, this includes clients of JabberVideo, but not Jabber client CPU.

  For Jabber clients you would deploy normally expressway-e series, see http://www.cisco.com/c/en/us/products/collateral/unified-communications/expressway-series/datasheet-c78-730478.html and http://ciscocollab.wordpress.com/2014/01/29/deploying-collaboration-edge/ - whether it will work with your existing deployment is another story, you might be better off ultimately to something similar to Pexip or Acano - both were developed by former TANDBERG/Codian/Cisco engineers.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• How to educate the MCU conferences hosted on another MCU

  Hello

  We have the MSE 8510 and MSE 8710 MCU. The auto attendant is configured on the MCU 8510.

  The Conference is organized on the MCU 8710, external participants connect to AA cannot join the same Conference because the 8510 MCU is not abreast of conferences hosted on a different MCU.

  How can we get the MCU 8510 abreast of conferences organized on the MCU 8710?

  It is not possible to link the two conference bridges.  You mention that when external participants dial in the auto attendant 8710, the 8710 doesn't have an auto attendant.  Why not have dial and then directly to the Conference on the 8710?