Could not complete installation / 'does not support this printer. "

Similar Questions

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• I want to use a Terminal Airport Express to extend network provided by my Fios router/modem without going through another airport base.  Is there a way to do this?  I understand that Apple does not support this, but surely there must be a way to do this.

  Can someone tell me how to set up an Airport Express Terminal to expand Network provided by my Fios router/modem without going through an airport as a base?  I understand that apple does not support this use, but my applecare Advisor said it's possible.  Thank you!

  Unfortunately, your AppleCare Advisor is wrong if he or she has told you that an AirPort Express to extend wireless signal of a Fios router/modem.

  Function of "Extend a wireless network" Apple is an exclusive feature that was designed by Apple engineers to extend the signal from another wireless only router from Apple. Thus, the AirPort Express... or any other router Apple besides... would not be able to extend wireless a Fios network.

  SO... you have the possibility to locate the Airport Express where it is needed... And... Connect it to the Fios router/modem with a permanent, wired Ethernet cable connection, then the AirPort Express can 'extend' in this way.

  Or... If you are ready to add a second AirPort Express, connect the first near Fios modem/router with an Ethernet cable, then the second Airport Express could extend the signal first Express wireless.

  Another way to say the same thing, is that if you want an Apple AirPort router to extend wireless network... then you need two Apple routers to achieve this goal.

• SL500 "this program does not support this system.

  I have an SL500 with 64-bit windows system 7. He has a new system installed. I have correctly installed all necessary drivers. Now, I'm not able to install elements of followind with the system update utility:

  ThinkPad ultranav driver for windows 7

  ThinkPad hotkey features integration pilot

  ThinkPad Ultranav utility

  If I try to manually install, I get an error message "this program does not support this system.

  I had the same problem with Version 3.84.1500 of the driver Thinkpad hotkey features integration

  (and the latest version of 3.84.2000)

  This is a faulty installation.

  2 the missing files.

  Solution to what Lenovo fixes installation:

  Download and install the latest version.

  Download and install the 3.81.0100 version.

  Copy the files SWI32.sys and SWIX64.sys of the 3.81.0100 in the folder version corresponding to the most recent version.

  Run setup.exe from the most recent version.

  According to the properties file SWI32.sys and SWIX64.sys are used as 'System Information Detector'.

  No wonder we get the error message "this program does not support this system.

  Lenovo, please fix.

• I have IE9 in my computer, but it does not support my printer Canon Mg5170. How to solve this problem?

  I installed IE9, but it does not support my printer MG5170 canon. After you have installed the Easy WebPrint EX, I don't see the toolbar. Canon technical support has informed me that Internet Explorer 7 is required.how can I solve this problem?

  Hello

  you don't say which version of IE you had installed before IE9

  Uninstall IE9 to revert to the previous version

  read below

  http://Windows.Microsoft.com/en-us/Internet-Explorer/help/IE-9/How-do-i-install-or-uninstall-Internet-Explorer-9

  To uninstall Internet Explorer

  The following instructions apply to Windows 7 and Windows Vista.

  1. Click the button start , type programs and features in the search box and then click the display installed in the left pane updates.

  2. Under uninstall an update, scroll down to the Microsoft Windows section.

  3. Right-click Windows Internet Explorer 9 and click on uninstall and then, when you are prompted, click Yes.

  4. Click one of the following:

     • Restart now (to complete the process of uninstalling Internet Explorer 9 and restore the previous version of Internet Explorer).

     • Restart more later (to wait until you stop or restart your computer).

  

  Note

  After you uninstall Internet Explorer 9 RC, the previously installed version of Internet Explorer will be available on your computer. There is no need to reinstall.

• Check out pivotTableView! 1 is either missing or does not support this format

  I asked with pivot table that is displayed in the form of bars, and once (two views) displayed as Hello.
  I used the view selector to let the user select which display he wants to watch.
  
  Suddenly, after that it already works fine, when I changed the selecotr to view the display of bars (by default) at the sight of the pie, I get the following error message:
  
  "Discover pivotTableView! 1 is either missing or does not support this format'
  
  During execution of the method of creating the same request responses, it works fine.
  There is no question about data, as bars goes ok.
  
  No one knows the significance of this phenomenon?

  Without seeing what you were doing, try this: remove the second point of view completely and rebuild it by reduplicating the first PivotTable, then by changing the display of the graph to reflect the pie chart. Then, change the view selector to enter the newly created view.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• ASUS Support CD does not support this operating system WNT_6.2l_64

  What the devil I've had Windows 12

  ASUS Support CD does not support this operating system WNT_6.2l_64

  Hi George,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  General Forum(Windows Server) Technet

  Good day!

  Answer please if you face concerns.

• Need help! This version of Windows does not support this version of Windows Media Technologies.

  I got this error message when I tried to install Hotel Giant 2. Don't really know what to do... Pls help! Contact Microsoft Corporation support This version of Windows does not support this version of Windows Media Technologies. This product, which was created by Microsoft Corporation, has been blocked from running because it can prevent your computer from starting correctly in the future. Recommendation

  Hi Dot77,

  Thanks for posting on the Forum of answers.

  I suggest to download the patch from the site Web of Nobilis.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  Hello

  1 how long have you been faced with this problem?

  2 have you made changes on the computer before this problem?

  3. when exactly you get this error message?

  The following threads may be useful:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-from-webpage-not-implemented/d09fa331-92c6-4CD3-bc89-9a2c03e304fe

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn

• When I connect to the Internet, I get a message error "object does not support this property or method". Unable to do anything from there.

  original title: error messages
  As soon as I get on Explorer and on internet I get an error message "object does not support this property or method' am unable to navigate due to this message to appear on each movement.  Someone help?  Thank you

  Hello

  (1) do you have made no changes before this problem?
  (2) is this problem limited only with a particular website or any websites?

  (3) when exactly, you receive an error message when you use Internet Explorer or when the Internet connection?
   
   
  Method 1: If you receive script errors, you can read the following article and check if that helps.
   How to fix script errors in Internet Explorer on Windows computers?
  http://support.Microsoft.com/kb/308260

  Method 2: You can also read the following article and check if it helps.

  Can't access some Web sites in Internet Explorer
  http://support.Microsoft.com/kb/967897

  Warning: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet files, cookies.

  Method 3: Networking in Mode safe
  Follow the link below and check if the problem persists in safe mode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Hope this information helps.