CPU HP Pavilion p6-2260ea model made rattling noise

Similar Questions

• HP OfficeJet 7500 made rattling noise

  Rattling noise occurs after a print job. The printer works perfectly until it happened. No damage, spills or other changes. Do you have a quick mistake, who said that I was using the wrong book, but I couldn't find the error: same paper as usual. Someone at - it a similar problem, or, I hope, a really easy solution. Thank you.

  Hello

  I suggest you to follow these steps and check if that helps:

   

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• Pavilion P6-2260ea, recovery disks won't laod on new hard drive.

  I have a Pavilion P6-2260ea who started running very slowly and crash intermittently.  Self-assessment of DPS ran the disk, the drive specified result was suspect and should be replaced.  I bought a Seagate Barracuda SATA drive to replace the SATA Hitachi in the machine.  Unfortunately, that I had not created so recovery discs I bought at HP.

  The Seagate is now installed but when I put the recovery disk 1 in the drive ROM its starts to load windows files, then the error.  I ran the DPS Sef Test against the new drive and it is successful, then the new drive seems to be ok and recognized, I think?

  Windows is loading files...

  Windows Boot Manager

  Windows has encountered a problem communicating with a device connected to your computer.

  This error can be caused by unplugging a removable storage device, such as an external USB drive while the appliance is in use, or by faulty hardware such as a hard drive or a CD-ROM, which fails.  Make sure that all removable storage is properly connected, and then restart your computer.

  Status: 0xx00000e9

  Info: An unexpected i/o error has occurred.

  At any time the Ollie.

  I am pleased to have been of assistance.

  I forgot that your PC has usb ports 3.

  You cannot use those when you try to boot from a flash drive (at least not until the 3 Windows USB drivers are installed, which they were not).

  Sorry, the recovery disks did not work.  It was a lot of quid to spend on something that did not work!

• Upgrade CPU HP Pavilion DV6-6B25TX Intel Core i3 - 2350M of Core™ i7 - 2620 M processor?

  Hello

  Can I upgrade CPU HP Pavilion DV6-6B25TX Intel Core i3 - 2350M Core™ i7 - 2620 M processor?

  RAM can be upgraded to 16 GB... ? 8 GB / dimm

  Pls. suggest / recommend...

  Concerning

  Manish Singh

  Here is the list of compatible with you i7 processors l and offered as an option by HP

  Intel Core i7 - 2640M 2.80 GHz (turbo SC up to 3.50-
  GHz) processor (FSB 1333 MHz, 0 - MB L3 cache, 4,
  Double - heart, 35 W)
  √
  Intel Core i7-2630QM 2.00 GHz (turbo SC until)
  2.90 GHz) processor (FSB 1333 MHz, 6: 0 - MB
  L3 cache, quad core, 45 W)
  √
  Intel Core i7 - 2620M 2.70 GHz (turbo SC up to 3.40-
  Processor GHz) (4: 0 - MB L3 cache, dual core, 35 W)
  √
  Intel Core i5 - 2540M 2.60 GHz (turbo SC until 3.30-
  Processor GHz) (3: 0 - MB L3 cache, dual core, 35 W)
  √
  Intel Core i5 - 2520M 2.50 GHz (turbo SC up to 3,20-
  Processor GHz) (3: 0 - MB L3 cache, dual core, 35 W)
  √
  Intel Core i5 - 2430M 2.40 GHz (turbo SC until 3.00-
  Processor GHz) (3: 0 - MB L3 cache, dual core, 35 W)
  √
  Processor Intel Core i3 - 2350 M-2, 30 GHz (3,0 MB L3
  cache, dual core, 35 W)
  √
  Intel Core i3 - 2330 M 2.20 GHz (3,0 MB L3 processor
  cache, dual core, 35 W)
  √

  Your laptop supports up to 16 GB of RAM DDR3/1333 MHz.

  Make sure that you buy only guaranteed compatible RAM. This means some off-brand memory modules if you want it to run as soon as you install the modules. There are two soDIMM slots in the motherboard of your laptop.

• Stock HP Pavilion p6-2260ea case fan

  What is the airflow on the fan housing stock for the hp pavilion pa-2260ea desktop pc? The fan is a Foxconn PVA092G12M I can't find any information on in anywhere.

  It's really easy to find. The rear fan is called the system fan and it's part # is 646679-001. It can be a Foxconn PVA092G12M (92 x 92 x 25 mm) with specifications DC12 v 0. 24 amp, 45 CFM and 3 PINS.

  Now for the crazy and complex. Only where no one knows the number of TURNS on this fan. You'll see ratings 900-2800, 1400 - 4000 RPM.

  The best that I can recommend is that you actually use this program, CPUID HWMonitor find your fan rpm. FANIN1 is the rear fan. Low rpm fan will trigger the alarm of anomalies. You must run the program and then point out the system to turn the fan at a higher speed.

• my laptop keyboard is not working. His pavilion G6 2228TU model please help me.

  my laptop keyboard is not working. His pavilion G6 2228TU model please help me.

  Hello

  This could be a hardware problem, but it is always worth trying the following.

  Open windows control panel, open Device Manager, expand keyboards, "Standard PS/2 Keyboard" right click and select uninstall.

  When you are finished, stop the laptop - if you're running Windows 8 or 8.1, do it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• Computer laptop dv2419us (2000series): is there a graphics card that will be compatible with my HP Pavilion dv2000 laptop (model dv2419us)?

  ? Is there a graphics card that will be compatible to my HP Pavilion dv2000 laptop (model dv2419us)?

  -This laptop has Windows 7 Home Premium.
  -I wanted to take the free update for WIndows 10 - I asked the reservation.
  -First reaction has been waiting for downloads would be available.
  -Just got the message that it is not compatible with Windows 10 because there a GB Nvidia GeForce 6150 graphics card.
  -J' contacted Nvidia on a card that would be comaptible with WIndows 10.
  -Response has been that could not recomment a replacement and contact HP.
  -Does anyone know if there is a replacement of a graphics card for the HP Pavilion laptop dv2000 which would make it compatible with Windows 10?
  ... Or is my only option to not upgrade to Windows 10 or buy a new laptop?

  Hi there @murray62east,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you are curious about a replacement of a graphics card.

  Unfortunately the graphics cards are not replaceable on laptop HP Pavilion dv2000. They are directly attached to the motherboard. The only way to replace a graphics card would be to replace the entire motherboard.

  Hope that I have answered your question.

  Have a great day!

• recover hp pavilion dv4-1504tu model: VV020PA #UUF for the 32 bit Windows 7

  Help me to recover hp pavilion dv4-1504tu model: VV020PA #UUF for the 32-bit Windows 7.

  Thank you

  Hello

  The 3 main methods to restore your laptop to "Factory Condition" can be found on the following link.

  http://support.HP.com/us-en/document/c01867418

  Kind regards

  DP - K

• Normal palmrest rMBP 15 '' rattling noise?

  Hi all

  I'm certainly not technically minded, so sorry if it is not a stupid question / too long! I'm also new to the forum so I hope I put this in the right place...

  I have a September 2014 15 "Macbook Pro. Us build some quality problems with it (trackpad rattling, squeaking hinge) I solved last November. Now, however, a couple of new problems have emerged:

  (1) even under slight pressure (put your hand on it or, sometimes, rest two or three fingers on it) the Palm made a rattling noise pronounced, as something that separates from something else and then meeting again when I take the pressure on her.

  (2) the lower part of it can feel quite fragile, and sometimes when I press lightly on it I can hear the sound of two bits to touch metal (noise low 'thought' is the best way I can describe it).

  I was wondering if it is normal - the genius at the Apple store insisted that the mahlstick noise was just the clips that hold the main Board in place. I wasn't convinced as he only started doing a month previously, as surely that this was only the clips making the noise, he would have made noise for 1 day? They also could not find anything wrong with the below.

  I was wondering if these are problems that anyone else has met--I'm not worried that the computer is going to break or anything, it's just a little embarrassing that a premium computer has these niggles build quality!

  Thank you very much for reading!

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Rattling noise - the graphics card or power supply?

  Hey guys,.

  I've had my HP Pavilion Elite m9300t for almost 1 year now. About half of that time, I had to deal with the annoying rattle noise that I attributed to one of the fans in the case. Unfortunately, my PC is equipped with GeForce 9500GS formidable card (with the black cover) and so noise, while annoying, is not surprising. The rattling noise has been stronger and more widespread during initialize and not significantly lower over time.

  But now I have an another problem and I'm not sure if the two are related. Now, the sounds rattling calms down (no noise whatsoever) and in 20-30 seconds, the screen empty... similar to the computer goes into mode 'sleep'. More funny thing is, the PC is set to operate at full capacity and therefore the 'sleep' mode. This problem started occurring 4 weeks ago and happen once a few days ago. Now, I am unable to work for more than 5 minutes after the initial upward boot before the screen turns off.

  I concluded (don't know if I'm right or not, where my post here) I have a power supply issue. The PC came stock with a 350W power supply, but I don't know if my linked overuse of heat damage on the motherboard or the power supply failure. I work with software music production and large audio files 70-80% of the time and the PC stays on for long periods. I am aware that these applications are stressful, but I'm not sure whether or not they can cause the types of symptoms that I described.

  So basically I guess what I'm asking is the following; is my problem, a graphics card or POWER supply number or both? Then based on the advice given, I would also like to know what the next step is to get my PC to 100%.

  Thanks in advance for the help.

  If your PC still work with a white screen, I would check the video card first, especially since you did not get the new & improved version

  Try to isolate the problem step by step, the PSU isn't necessarily the problem as the system is in place.

  Message edited by sclui56 on 08/11/2009 20:50

• Satellite A500 - rattling noise

  Hey guys,.

  I ve bought my A500 a month ago and since I got it, there is a small click on the right side, then where is the Num-Lock button.
  I Don t think it s HARD drive because it is not a permanent by clicking, it's like * click * seconds later * click * and so on...
  I heard that NHC (Notebook Hardware Control) should solve the problem, but I have windows 7 64 bit and the NHC doesn´t work under this version.
  So guys do you have an idea what I can do to stop it by clicking on? :)

  Sorry for my English but I m from Germany ;)

  Hello

  > I Don t think it s HARD drive because it is not one clicking permanent, its similar in a few seconds click and so on

  As I know, only the hard drive can make rattling noise in laptop computers.

  > I ve bought my A500 about a month ago

  Do not wait and go to AEP (SAV) which you can find here:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Lemark suddenly stopped scanning. It makes a rattling noise.

  2600 series Lemark suddenly stopped scanning.  It makes a rattling noise.

  Instead of posting your question in the Feedback forum, where you post your feedback on the web site of Microsoft Answers, you should have posted in forum hardware and drivers, which is where I moved your post.  Please return to your message, click on edit, change the Version of Windows, menu dropdown to indicate which version of Windows you are using, and then click on submit.

  Frankly, you should talk to a repair shop, don't ask this question here.  It seems that the internal mechanism in your Lexmark has failed.

• rattling noise Photosmart c4280

  Recently, my Photosmart C4280 makes a quick loud pinging from the start under tension, or whenever I Press PRINT or COPY.

  The sound seems to come from the right side of the unit, is approximately two seconds and sounds like a mchinegun continuous burst. When the noise stops, printing or copying function works and produces a normal copy. This only happens on the first page. If I have selected several pages the noise only occurs on the first printed page. However, when you perform repeated simple copies, the noise whenever I have print or copy.

  I tried the following without change:

  -Removed the back cover and it wiped all the rolls

  -Deleted and reinstalled ink cartridges (resettled same cartridges)

  -Performed a Hard Reset (disconnect from the computer, power cable printer disconneting & electric transformer, unplug the power supply from the socket wall, holding THE button 30 seconds, then reconnect the.)

  -Conducted a partial reset (this product a new alignment page that I used realigne printer/scanner).

  Power supply printer is plugged directly into the wall, rather than by the surge protector.

  Welcome to the 8800golf forums

  I read your post about rattling noises that come in your printer. I also noticed how you tried him recommend troubleshooting for this issue.

  At this point, I suggest you to directly call HP if the problem persists for you to see your options with them.

  If you decide to call, here is their contact information:

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Happy Monday

• Fan of Sleekbook 4 HP ENVY rattling noise

  Product name: HP ENVY Sleekbook 4 PC
  Product number: C2K72UA #ABA
  64-bit Windows 8

  So I've had this laptop since November and it was fine, until a few months ago, when he started to make this fort of the sound vibrations in the upper right. Sometimes he'd stop, then rattle noise would come back in a few seconds.

  What should I do?
  [I don't have a warranty on this laptop]

  Hey jennyydang,

  I'm sorry that you run into a problem with the fan. You may already be aware of this but the laptop comes with a standard 1 year warranty (free repairs for non-customer - damage caused by). Which is included in the price of the laptop if you bought new or is less than a year (even if it was, say, given to you... If it is less than a year, he got a guarantee). If it's less than a year, I suggest strongly sent the repair. The fan noise of rattling is normally fixed by simply replacing the fan.

  If the laptop is more than a year, you could bring to a repairman or replace the fan on your own. (It's a very tedious job, and at least that a repair like this is a hobby for you, it's worth the price you pay someone to fix it)

  Envy 4 Service and maintenance Guide - Fan of the manufacturer 691641-001 page 55.

  HP parts store - 800-227-8164

  I hope this helps! Please let me know if you have any questions on anything

• Upgrading CPU for Pavilion dv6

  HP Pavilion dv6 3131-SO

  identical to XD560EA #UUW

  Win7 64-bit, SP1

  I couldn't give a sense of the possible processors for this model. Currently running AMD Athlon II P340 bicoeur, but want to update that. Made of electronic soldering before so this is not a limitation.

  Also apologies if it has already been answered to this question, but unfortunately, none of my searches returned answers. Maybe I don't know what to look for.

  Thank you in advance!

  Hello

  Please consult the following manual, there is a list of the CPU socket supported:

  http://h10032.www1.HP.com/CTG/manual/c02659236.PDF

  Kind regards.