CPU is noisy

Similar Questions

• CPU fan noisy in Satellite P200-17 b - how to remove dust

  My toshiba p200-17 b is now several weeks ago about 16 months old, the CPU fan works conttineously all the time.
  The air fan, I see there is a lot of dust in the CPU fan.

  What should I do now?
  Is the clean cpu fan included in the warranty?
  Is it possible to do this cleaning by myself?

  Yes, you can clean yourself.

  For this, you can use compressed air jet and could blow the dust from the fan. Should not disassemble the laptop.

  But before this, shut down your laptop.

• HP pavilion slimline: noisy

  In the last week, my computer is acting strange - everything works perfectly fine but my cursor blinks constantly - it's the arrow with the blue circle.  In addition, my cpu is noisy as if he's still looking for a file.  One of the lights on the front blink too - like when you're updated or install programs.  I ran all types of scan I can and everything is perfectly fine.  Any suggestions?

  Pjhmah, welcome to the forum.

  I suggest CHIP to see if the hard drive works fine running.  Here's a guide to help you.

  For future use, when the application for aid, you must always include the make and model (e.g., p6-xxxx) of the computer or the monitor. This information is necessary for us to review the specifications for them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

  Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

  I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

  Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

  I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

  Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
  Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

  If someone could have some drivers or set which will slow down the fan under 64-bit windows?

  T.

  Hello

  You can set Windows Power plan settings in order to improve the cooling system.

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

  Try this settings:
  Plan (Toshiba power save) optimised battery
  Technology Intel Turbo Boost (BIOS) - disable
  The CPU always low frequency

  From my experience, this should reduce the noise.

• M4: Regulation of the CPU power and fan - tablet is running hot and noisy

  My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

  Is this normal?

  Also my M4 allows on occations to memorize the fan.
  Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
  However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
  Yourself or others behave the same?

  Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
  (http://www.pbus-167.com/)

  East of problems common to the M4 or Tecra series?

  GeirS

  Hello

  If the operating temperature of the machine goes upward, so that the cooling fan turns on.
  Many parts for example produce a lot of heat from the graphics card.
  In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
  If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
  You can believe me :) It's not a fault!

  If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

  Best regards

• My CPU is too noisy

  Hello guys, I'm new here and I am happy that I have just register at this community forum. I bought a HP Compaq Presario CQ58 laptop and it works really well, but in the month last CPU began to get noisy. I installed SpeedFan to monitor processes and other things and I noticed that the temperature in my laptop is really high (look at picture down).

  

  Can someone help me cool my CPU, ' cuz it is really teasing me.

  Thanks indeed!

  You can buy a can of compressed air for cleaning PCS in most electronics stores.

  Use compressed air on the ports of entry and exaust on the bottom of your laptop. It will have the effect of clean dust from the CPU fan.

  Best regards

  ERICO

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• Low utilization of the CPU, system hot, noisy fans

  My 2011 27 iMac mid has worked well. Here are the basics.

  

  The system has an SSD instead of a hard drive (therefore less heat than normal). I use the development system: it is not and has never had a lot of junk on it. About four weeks ago, the system started to run hot and the fan was strong while the CPU is about 99% vacuum. I have download the trial of TG Pro and the CPU seems

  

  "Load" in the photo below, which is less than 3%, is high normal baseline because I'm running TG Pro and activity monitor.

  

  The noise is very annoying and seems out of line for the load of the system.

  Someone has any practical suggestions or see obvious problems? (Until you point out 24 GB RAM and other fundamental issues, keep in mind that this system has been stable and performing normally in the current configuration for about nine months, save El Capitan updates).

  Resetting the SMC often with these problems reset management system (SCM) controller on your Mac - Apple Support

• Satellite A500-040 - too noisy CPU fan

  My CPU fan runs too fast and too loud. The fan speed is still 73 percent. Although I have not used all the programs, the CPU fan speed is always 73%. Never speed is made once it has reached 73%. Even the CPU temperature is about 35%.
  I tried to do as a result of the actions:
  It solves not 1 updating bios/drivers-
  2 changing settings of the power plan does not solve
  3 cleaning cooling module does not solve

  Can someone help me?

  Unfortunately there is not much you can do about it. Cooling fan is controlled automatically. I put t know which options have the power that you have changed, but please try to change the option for cooling method. You can find it in the advanced power options > Toshiba power Saver saver > cooling method.
  Use the optimized battery option. This should reduce the activity of fan cooling.

• Noisy CPU cooler

  I had a desktop Pavilion Elite m9543uk with a computer card mother IPIBL-LB (BENICIA)

  for about 4 years and now my CPU FAN is loud and very annoying. I know that I can change that, but I noticed that almost all cpu coolers are supplied with radiator mount push pins that is my question will be my card MOTHER accept these (or ARE THE HOLES FOR SMALL?) and what would be the best cooler to buy?

  Orpheus1942,

  You can replace just the fan.

  Research on your question, I noticed this:

  Heatsink heat is # 5187-8413 for all (radiator and fan). But the fan is a 80 mm found here.

  Although in the United Kingdom, please refer to specifications. The PWM RPM is the most important.

  How to measure any fan  (80mm fans are 80mm or 3.15 ")

• Re: Temperature Normal CPU but the fan is noisy

  Hello

  My average CPU time are 45 on idle and 75 when you play. So, what causes the fan being a little louder than usual, although having normal time? It's not that loud and I could live with it, but I'm afraid it's something wrong with the fan.

  Also, I checked PC Health Monitor and the fan speed is at 50% is STILL on idle. It is 50% from the first day, but the noise is more noticeable now.

  PD: Laptop is 1 month old.

  Post edited by: iroha

  I put t think that there is a problem with the cooling fan. It is controlled automatically. What you can try is to modify the parameters of the method of cooling.
  You can find it in the advanced power options > power Toshiba settings. Assign the optimised battery.
  This should reduce the activity of fan cooling.

  Please test and post comments.

• Satellite 2410-404: screen is lost and the noisy CPU fan

  Hello

  first: sorry for my bad English.

  Now: I have several problems with my laptop:
  1. the monitor/screen is lost and does not stand up, so when I want to work with my laptop, I need to address something against the monitor, so it does not fall on the side. All the solutions to this?

  2. my Cpu fan is really strong and I have already opened the case and cleaned, but every day the noise comes back (assumed that his doesn't turn not very well and communicating with once in a while a part of the computer) and I have to reopen and touch several times until it works normally.

  3. Furthermore, I lost my CD of Windows Recovery (OEM Version). Do I have to buy a new one if I want resettled windows?

  Thanks for any help

  Hello

  1. I guess the lid can not stay in the right position, because the hinges are a little loose.

  2. it looks like something wrong with the rotation of the fan. In such cases the easiest way is to change the fan.

  3. you can buy the CD recovery form the Toshiba service partner in your country. It s not very expensive.
  But you can also install the original Windows operating system on your laptop and then you can install the drivers of Toshiba and utilities. All Toshiba stuff, you'll be able to download from the Tosh driver page.

• Desktop HPE-210y noisy CPU fan

  I bought my house in 2009.  In recent months, there was a buzz in the chassis.  I thought it was a hard drive failed, so I replaced it, but the noise continued.  In fact, it's the CPU fan.  I cleaned the dust off everything inside, including under the fan heatsink.  The noise continues.  Should I replace it?  It seems to be fixed on the heat underneath sink.  If I do not need to replace it, how to find the right part? When I enter my serial number in the search of part of HP, it lists 30 components. It is said the cooling fan system is 5188-3722 and says that it can be ordered from HP.  It also lists the "heatsink for AMD", 575691-001. It then lists on the fan itself, the STROKE part number.  In another search using a BOM component, I see "Cooler STROKE AMD 125W PCB AVCFAN", Assembly p/n 466715-001.  What exactly should I order? Once I find, I can replace it myself or I have to find someone to do it?  (I replaced the memory and hard drives). Thank you.

  Pavilion Elite HPE-210y

  8 GB RAM

  ATI Radeon HD5450

  Windows 7 Home Premium 64-bit

  1 TB SATA

  Hello @kjd_1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are looking to replace your radiator and fan system on your desktop HP Pavilion Elite HPE-210y PC. The heat sink is the heatsink and fan assembled between them then (5188-3722) system fan is the fan on the rear part of the housing. According to the noise is coming from will depend on who you are replacing. The system fan is NOT the fan on the heatsink.

  I do not think that you should really have a problem replacing the heat sink, just make sure you clean and replace the thermal grease while you're there.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Toshiba Satellite Pro S500 i5 or i7 i3 CPU upgrade

  Hi everyone, I'm having 7 Toshiba Satellite Pro S500 Notebooks here and want to update these shit Core i3 330M and 350M, 370 M and 380M CPU for Core i5 or Core i7 CPU. I'm not quite sure what CPU Socket, I have to buy and which generations of CPUS are supported by the S500. I processors up to 380 M Corei3 assembled in these things now and think its a HM55 Express chipset inside which must allow to i5 and i7 processors. I already had problems in upgrading toshiba tecra A9 modells and after upgrading CPU they were running very well and the FAN was blowing ultra noisy at speed of 100% all the time without ever turning off again even if the laptop could be frozen at 0 ° C and it has never been warm. Level 3^rd Toshiba support then told me that he would need a firmware update they do provide customers and was told to send books to repair @ € 50 each, just to update this microcode. So I would ask if anyone has a list of processors supported for the S500 modells?
  Numbers of exact model I have:
  Satellite Pro S500-106 (PSSE0E-19M06SLD)
  Satellite Pro S500-147 (PSSE0E-0HH06SLD)
  Satellite Pro S500-132 (PSSE0E-09G05ELD)

  Hope someone can help, I don't want to end up buying an i7 or i5 cpu, spending 50 dollars, investing 4 hours work and end up with a laptop unusable, I immediately dismantle again just for the work that I had invested... Forward your answers J

  Best thing to do is to choose a CPU provided with one of the other S500 PSSE0E patterns. This way you can be sure the BIOS supports.
  Some portable computers require a cooling system calibration after that another CPU is installed. An ASP can do the calibration.

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards