Create problems of recovery using Verbatim DVD + R disc

Similar Questions

• I use a dvd - r disc, but the movie maker says is not a recordable disc

  I use a dvd - r disc, but the movie maker says is not a recordable disc. also, when I try to publish the dvd is not the choice, her computer, a recordable cd or camer digital video...

  If you're running Vista Home Premium or Ultimate...
  the following article is perhaps worth the drive... If not...
  You'll need to publish (your Movie Maker save project)
  in the. WMV video format and the use of third-party software
  to burn your DVD.

  "Import files into Windows Movie Maker" "publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html
  Scroll down to: "2 to publish and burn a movie to a DVD")

  If you need DVD Authoring software... What follows
  freeware software can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I have a HP Pavilion with windows vista, can I create recovery system on dvd - r discs? Donkey1

  I have a HP Pavilion with Windows Vista a6214x.  About 3 years ago, I created my recovery with 2 discs dvd - r system

  I never had problems by creating discs and my HP troubleshooting and maintenance guide says that I could use either

  the dvd - r or dvd + r. But the other day, technical support of HP said use the dvd + r to create system recovery discs. If this is the case, I have to start all over again and create Sytem recovery discs on dvd + r?

  Donkey #1

  The DVD creation has always been a unique event. I'd be surprised if it worked.

  HP can tell you how to reset the utility.

  Reviews by HP on the use of the DVD + R

  http://support.HP.com/us-en/document/c00882383

• Spectrum x 360: create a media recovery using HP Support Assistant

  Hello

  I bought my laptop with Windows 8.1 is installed and I did using HP Support Assistant recovery media.

  I want to upgrade my OS to Windows 10, but I wanted to ask I'll be able to use HP Support Assistant to create

  another media recovery for Windows 10?

  Thank you

  Geffen

  There are other products that will allow you to create an image of the hard drive. Macrium, for example, has a free version that will allow you to do.

  http://www.Macrium.com/reflectfree.aspx

  In 10 of Windows, you can create a custom refresh image. the image of custom refresh allows you to copy the disk hard drive will allow the current settings and software. You will be able to use Windows Update at will when you have a question that doesn't create problems that do not allow you to boot into the operating system.

  Creating a custom in Windows 10 refresh image

  http://www.howtogeek.com/108944/how-to-create-a-custom-refresh-image-in-Windows-8/

  Creating a backup system in Windows 10 image

  http://Windows.Microsoft.com/en-us/Windows/back-up-programs-system-settings-files#1TC=Windows-7

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• Satellite 1110-Z15: problem with Recovery CD and DVD player

  I currently have a Satellite 1110 model number PS111E-006R8-EN/S1110-Z15.
  But a few weeks ago, my DVD Rom drive no longer works, it would not run properly when a cd is inserted it kind of Jolt and then arrested and continues to do the same. Anyway to cut a long story short, I tried to rebuild the system by using a version of windows xp that has been successful, it is now, I found the original recovery disks, but without using the cd drive inward, I had recourse to an external cd drive freecom, I hold the c key at startup , but nothing happens, can anyone help emergency
  PS: I made the changes in the Bios to boot from the cd drive

  Hi nichollsr,

  in our society, we have 2 Satellite 1110-Z15, and there is a delicate hint for recovery.

  Toshiba has made a small mistake and printed the wrong order on the CD. You only need to change the order of the Recovery CD. No.. 1 is no. 2 and vice versa.

  Insert the diskette n ° 2, hold down the 'C' key and the recovery is expected to begin. If your laptop does not identify external drive-Freecom CD try to hold the 'U' key to boot from USB.

  I found a FAQ on the site of Toshiba UK

  http://UK.computers.Toshiba-Europe.com

  You must click on Support / download, then to the knowledge base and search for a called FAQ

  'TIU0000002559 '.

  There is a detailed explanation of this issue.

  Goodbye, TOK

  PS: Do not forget to reward points, I'm a Pointcatcher!

• How can I save a clip from youtube website using a DVD - RW disc?

  Is this possible?

  Please provide a step by step process to find out how to record from my Compaq Presario desktop PC.

  Please also indicate if I need additional software or equipment to record.

  I installed the VLC media player and I can now watch the youtube clip. However, when I tried to copy the clip on Dvd using Roxio Creator 9 Basic, I could not add the clip in order to get to the next step. So, I was unable to create the disc. However, I didn't know the symbol for VLC media player when I tried to add to the file which is the reason why I could not go further instead I saw a cross bar on the clip. How can I get so I can add file? Please answer as soon as possible. Thank you

  Glenn

• Hello, I am using windows DVD maker and would like to know thw following: how to add text to the slide show?

  Hello

  The slide show is done but I can't add text can you please let me know if this feature is available

  Hello

  If you use the native windows DVD creation I suggest going through the article in Microsoft and check if that helps.

  Burn a DVD-video using Windows DVD Maker disc

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  (See less to change the DVD menu text)

  See also:

  Work with projects in Windows DVD

  http://Windows.Microsoft.com/en-us/Windows7/work-with-projects-in-Windows-DVD-Maker

  Work with projects in Windows DVD

  http://Windows.Microsoft.com/en-us/Windows7/work-with-projects-in-Windows-DVD-Maker

  Hope this helps and keep us informed if you need help.

• Failed to create the recovery on my Satellite A300-29N using Sony DVD disc

  Hello

  Tried to do the recovery disk for Toshiba A300-29N using Sony DVD new, always make a mistake. Toshiba service center confirmed that Sony DVD is not compatible with this DVD player.
  The one facing this problem and any updates. Tried with DVD Imation, it worked fine
  Concerning
  Samir

  I do not use a Sony DVD but TDK or Verbatim DVD-R support. Whenever I used it I was able to create a recovery media. No problem at all.
  I recommend you do the same thing. Believe me, it will not work correctly.

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Re: Satellite recovery disk creating problem C660-10 d

  I can't create a recovery using Toshiba picture disc. DVDs are dismissed as empty when they are empty. DVD R/W burning OK with Microsoft and Nero software. How can I get a fix for this problem? TIA ZIZOUETZIZOU

  TOSHIBA recovery disk can be created with preinstalled Toshiba media recovery ONLY tool creator.
  So I t understand why you use software from Microsoft and Nero.

  Did you check user manuals document s and the chapter on the recovery media creation?

  To create recovery DVDs I recommend you to use empty DVD-R virgins only.

• Problem creating hard drive recovery

  I just bought a new T61 with Vista and went to create the rescue and the proceeds of the recovery disks. Everything goes well until R & R prompted me to insert the fourth disc of the set, how this error came.

  Disk is not ready or busy to perform another operation.

  Data were not properly stored in the disc currently in your drive. This disk can be is no longer usable.

  Click OK; Then, insert a new disc when promotion.

  I tried multiple disks, but got the same message. Also tried to restart the process, same thing, but this time from the beginning, IE once the program seemed to try and write on the first disc. Tried to uninstall and reinstall R & R but the same thing. In fact, records that won seem to have some data written to them. Also checked the drive and burn photos to a CD and running a DVD pre-recorded and everything seems fine. I read online that the process will only let you create a set of rescue and recovery disks but I think a full to be up to 8 CD, my process interrupted after 3 and don't work no more?

  I guess I can ask Lenovo for a set of disks (if they are really needed), but I wonder if I have a big problem?

  Thanks in advance for your suggestions.

  Thanks for this review. I tried all this and test to check the drive burns on CD and DVD. Everything seemed to go well with the computer. I even tried to reinstall Rescue and Recovery. But nothing seemed to solve the problem, whereby the disc creation process seemed to stall, hang or crash after only one just a few CD had been burned.  So I called Lenovo Australia and the technician that I talked to was suggested to use a different brand of CD - R. I said that I had done this without success. Then he suggested then I use DVD - R instead. I went and bought some and here it worked first time and without a hitch. So apparently, problem solved, use only DVD-R of for this if you can - drive less anyway.

  Either way, Lenovo Australia were not to simply send a set of on-demand recovery discs - it seems that they don't do so when there is a serious fault proved with the hard drive. I have not so far as to ask if I could just buy a set anyway - just in case.

  Thank you

• May not know what is the problem with recovery DVDs

  Last year, just after if my phone is turned on, I created 4 DVDs as such: http://i56.tinypic.com/6i79rn.jpg

  Recovery DVD disc 1
  Recovery DVD disc 2
  Recovery DVD 3 disc
  64-bit Windows recovery environment

  My laptop is Qosmio F60 - 14R, with Windows 7 Home Premium.

  Now what I want to do is to format my laptop and re - install windows 7 Home premium using these 4 DVDs. However, I can't understand why I can't reinstall or get the laptop to factory State.

  This wasted 8 straight hours of my time and I frustrated by many. You kindly tell me what I need to do? I'm lost!

  > However, I can't understand why I can't reinstall or get the laptop to factory State.
  S just put the first disc in the CD/DVD drive and the start of this drive and then follow the instructions on the screen. :)

  You put the disk environment to win always, but you should put the first DVD

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Can I use a DVD + R DL to burn a recovery disk?

  I have a HP s5660f desktop computer. Can burn on this disc.

  Applies to Windows 7, but may apply to other versions of Windows as well.
  Software recovery disc creation creates a set of system recovery discs using DVD blank, recordable (DVD - R or) DVD + R. HP recommends to use blank DVD + R disks. Use a label of the brand from a manufacturer that trust you, because the recovery DVDs is very important. You need about 2 blank DVD + R discs. Disc Creator software program indicates how many discs are needed early in the process.

  NOTEnly DVD-R and DVD + R discs are compatible with the program of creation of recovery disks. The following disc types are not compatible with the program of creation of recovery disks: CDDVD-RWDVD + RWDVD-R DLDVD + R DLDVD-RW DLDVD + RW DL

  @rleigh... You can't use DVD + R DL (double layer) discs to create recovery discs. These discs are not supported for this operation.

  @Starry... You cannot use DVD DL or RW to create on a HP/Compaq system recovery disks.

  Frank