Creating cloud updater/installer will not install

Similar Questions

• Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

  Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

  It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

  Thank you

  Corey

• Windows Vista updates which will not install

  My OS Vista Home Premium 32 - bit for my HP Pavilion a6460t computer will not install the updates listed below.  I scanned for virus conficker, as well as for other viruses, most recently with the Microsoft OneCare security scan (beta), and my computer is not infected according to these analyses.  I have also tried installing these updates directly from the websites of download from Microsoft without success ("the following updates were not installed").  Auto update is on.

  Update security for Windows Vista (KB960225)
  Update security for Windows Vista (KB958690)
  Update for Windows Vista (KB959772)
  Update definition for Windows Defender - KB915597 (definition 1.55.1119.0)
  Update for Windows Mail Junk e-mail filter [March 2009] (KB905866)

  Thank you

  Ron Alexander

  After several calls to the technical support of HP (which is also the warranty service for my Vista installed factory), the problem of update is finally resolved by reinstalling the operating system Vista.  Thanks again for all your help and suggestions.

  Ron Alexander

• CD/dvd drive and windows update/installer will not work

  Because I'm not on the computer, I am referring to I should be as concise and precise as possible here. The system is Windows Vista service pack 2.

  I'm trying to re format the computer of a friend. Something I've done often in the past. I did two recovery disks when the computer was new, but cannot do recognize the cd/dvd or any other, internal or external drive that I tried. error code 39 is cited in all cases.

  In addition, he said there are three updates to install when I boot on the system to start before these updates are installed only. In fact the windows installer has stopped working. I went into Device Manager and not only it shows conflicts for hard drives, but for multiple NICs also: twelve 6-4 adapters and five ISATAP adapters also Microsoft. I've uninstalled and restarted for all adapters reinstall with the same conflicts. In addition the machine will not be closed correctly in normal mode and I get a blue screen with a message of memory dump. I'm afraid to format the c drive, until I have a way to reinstall the system via a disk drive. Can someone help me please?

  I tried it in safe mode and it stops at least normally but as soon as I restart with networking all the problems are back.

  Hello

  I also suggest you go through the steps in the article and check if that helps.

  Hope that the information was helpful and let us know if you need more assistance. We will be happy to help you.

• Creative Cloud Desktop app will not install. How can I fix it?

  Whenever I have download the installer and start the process, I get a message saying that the installation could not initialize. Running Windows 7.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Sony PMB installer will not install

  I have a Sony VGN-FW275J... I'm trying to load the installer of PMB to a HDR-XR150. I tried over and over and over again and it will not be installed. He manages at the end of the installation each time, and then told me that he "... could not open key: unknown/components/DA (very long series of numbers, letters) check that you have sufficient access to that key or contact your support team."

  I'm the only one who uses my personal computer... period. Why it tells me I do not have a sufficient and safe especially... why in the world will not load software Sony Sony computer? It must be one of the stupidest things I ever experienced.

  Thank you for your post and welcome to the forum.

  Your description of the error appears to be a permissions issue - the installation tries to access a part of the system registry, but can not. After a reboot, try to run the installation in administrator mode - instead of double-click Setup, right click the icon and select "Run as Administrator" from the menu.

• Win 7 x 64-updated KB2160841 will not install

  I've been running Win 7 x 64 for a year with no problem installing updates.  This latest update will not be installed.  I tried troubleshooting ideas.

  My son came this afternoon and somehow determined that my .net program has been corrupted.  He uninstalled and installed again and everything worked fine after that.  I wish I could better explain what he was doing.

• IAM has a problem with the update it will not install code646 KB977839. I tried to install it several times and it still will not be installed. It keeps telling me to try again.

  I have tried everything what iwas instructed aet again this update will not start I get error code646

  Tip: Insert your Office CD in the Bay before the next attempt to install appropriate.

  Tip: If no joy, see if you can download the "fullfile" of the update and then install it manually =>

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a9738816-72cb-404B-9FCB-c58359ce550f

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB960859 and downloaded KB970430 security updates but will not install, error Ox8007F01E

  security updates KB970430 KB960859 AND toward the down loaded but will not be installed for several weeks now, the code error Ox8007F01E how to install these - what I should do.

  Original title: error Ox8007F01E

  Hi krashprone,

  Did you perhaps try downloading directly to install?  Please take a look at the link here for KB960859 and here for KB970430.

  Please let us know.

  Thank you!

• Windows Update KB3841109 will not install

  After running windows update, update will download but not install.

  KB3841109 WINDOWS UPDATE IS NOT INSTALLED

  Hi Landerwr,

  ·         You receive an error message or error code?

  Follow the steps listed in the following article to resolve the problem:

  You cannot install some programs or updates

   http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Vista update module will not install on TVSU

  KB 958865 Module of Vista update will not be installed when running of my think Vantage System Update. Also. I have a problem, install service pack 2 Vista after a recent restoration. These two depend on each other?

  Thank you.

  It is the screen I get.

  http://i101.Photobucket.com/albums/M46/mixineer/failedupdate.jpg

  All the problems are solved. SP2 would not install because of some corrupted files. After a take-over of the factory... all right.

• Windows 8 will not check for Updates, and will not install Chrome

  Hello

  I have worked with Windows 8 since May and I've always had minor problems. On the one hand, my wifi turns off on its own unpredictable way. Also, whenever I want to check the updates, I get a screen like below:

  

  Just empty under the update section. In addition, anything, I can not install chrome. All these problems happened after that I am connected to a WiFi signal and it turned off my Wifi. I had to re - activate the wifi in the settings. Please help if you can thank you very much!

  Linus

  See control Panel\All Control Panel Items\Troubleshooting\System and security/Windows Update.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7, or Windows 8.
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Try right click on the actual Setup.exe for Chrome and selecting the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  You can try the system restore to get back before any recent problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Windows downloads the updates, but will not install them

  When you try to install the updates, they keep failing, I get the error code 80070643, can someone help me with this.thankyou

  P.S. I'm on windows 7

  Hello

  Can I know what updates are not installed?

  You can check Windows Update history.

  1. Click Start and type windows update in the search box and press on enter.
  2. click view update history.

  Refer to this article:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the
  computer. You can also encounter this error when installing updates for Microsoft Office 2003.

  Click on this link and follow the instructions to correct the error:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  Alternatively, you can consult this article if updates failed were for Office 2003:
  http://support.Microsoft.com/kb/903772

  You receive the error code 0 x 80070643 when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052/en-us

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Creative Cloud installer will not install.

  I, also, will have this problem on Yosemite 10.10.5 on a macbook pro end-2012. 16gigs RAM. 256 GB SSD drive.

  Bridge began acting strangely, so I uninstalled. Tried to re - install the bridge, but then the creative Cloud application started acting strangely refusing to download and install anything.

  SO I uninstalled the creative cloud application.

  I ran the app Cleaner CC.

  When I download the latest CC app to install, it behaves as if it gets to about 2% on the thermometer progress bar and then POP! It closes. No message. No error code. Like the original poster said.

  Someone at - it ideas?

  Branch to a new discussion.

  Michael Witherell, I'm sorry that you encounter errors during the installation of the Adobe Creative Cloud desktop application.  I would recommend using the steps listed in the error "Unable to install" received when installing Adobe Creative Cloud desktop application to resolve your current error.

  If you have any questions about the steps listed in the document, we invite you to update this discussion.

• Creative cloud installer will not install Lightroom cc 2015

  Please help - it will fail to install LRcc 2015 - it says "Installation of failed administrator privileges are required to install.

  I have no idea what to do

  Installtion of Mac OS by the way - please help

  If so, follow the procedure below and then try to install Lightroom

  Step 1:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command, and then press the 'Return'. () Do not miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Click the gear icon and select apply to closed. Close the dialog box information .

  Step 2:

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command, and then press the 'Enter'.

  / Library

  (3) then navigate to Application Support > Adobe

  .

  Right-click on the Adobe folder and select ""GetInfo ' option. "

  Expand the sharing & permissions section.

  Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Please click on '+' symbol, it will open the list of user accounts. Add currently logged in username and administrator option,

  Then indicate ""& read/write " permission currently logged in username and Administrator option."

  Click the gear icon and select apply to closed. Close the dialog box information .