Place 7 screen broken and non-functional

Similar Questions

• T61: cover and non-functioning lights switch problem

  My T61 (type 6465) is coming for three years and has recently developed some minor but annoying flaws. The main problem is that the most reliable laptop will remain suspended: closing the lid does not have to be suspended in the first place and if I use Fn + F4 to suspend, it seems that clutching the back edge of the laptop (that you could do to pick it up and put it in a bag) cause him back on the suspension. Accordingly, I found the cell phone on when you remove it from my backpack, even if I was sure that I had hung before storing.

  The other symptoms, is that some of the green lights have stopped working. Namely, the green lights of power, battery, caps lock num and caps lock seem to have stopped running, but wireless, hard drive and activity to suspend lights continues to work. In addition, the orange battery light works very well.

  Other that the system continues to work perfectly: the battery is still good and maintain the load, the power supply charges the battery and powers the system properly. Power management applications show the correct information about the power status of the system (i.e. on current AC or battery-operated).

  I try to work if this is likely to be a hardware failure or a software problem initially. Has anyone seem to similar symptoms, or may suggest that the problem could be based on my description?

  See you soon,.

  -Mark.

  non-functioning lights is most likely a hardware problem.

• Satellite A300 and Vista 64-bit - unknown and non-functional devices

  I have the Satellite A300-1Gn
  Here are some features:

  Technology
  type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB
  
  Operating system
  GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)

  
  
  System memory
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)
  
  Hard drive
  capacity: 320 GB
  Certification: S.M.A.R.T. disc rotation: 5 400 rpm
  
  DVD Super Multi (Double Layer) drive
  Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
  Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
  CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
  6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
  type: DVD Super Multi (Double Layer) drive
  
  Display
  "size: 15.4"
  type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900
  
  Graphic adapter
  Manufacturer: ATI
  type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
  graphics memory using HyperMemory™ with 4 GB of system memory technology)
  memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

  I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
  Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

  Thanks in advance guys (or girls);...

  Hello

  Have you installed the right graphics card driver?
  The Sat A300-1GN belongs to the PSAGCE series.
  I checked the page of the Toshiba driver and there are two pilots;
  I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

  Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

  I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

• A project which supports the devices to screen both touch and non touch screen.

  Our team works at the request of BB, which is oriented to a wide range of supported devices. It should support devices with OS version 4.2 - 5.0. We decided to use the v4.2 OS APIs. Then our application would be supported by all devices. It was a successful until recent times. Problems arose when we started to use navigationMovement() function to handle events of movement. This function works very well on devices with a trackball and it does not work on touch screens. On touchscreens, we should replace touchEvent() function.

  When we added touchEvent function to our project, then the project could not be started on devices with OS< v4.7="" (error="" starting="" application:="" class="" 'net.rim.device.api.ui.touchevent'="" not="" found).="" so="" i="" think="" we="" should="" split="" our="" project="" in="" two="" branches:="" the="" first="" will="" support ="" touch="" screens="" and="" the="" second="" one="" will="" not.="" there="" will="" be="" two="" shortcomings="" in="" this="">

  1. we must ensure on corrections in the two projects. It can happen that one branch has been updated and the other is not observed (has been forgotten for example).

  2 instead of this a binary, we will have two binary. But it is easier to have a binary that works on all desired platforms.

  So please give me an advice how should we update our project to make it work on touch and non-touch screen devices.

  Software development we use: JDE 4.2 and 4.7 JDE.

  you could build a library for the base classes 4.7 project and use the dynamicy for them class (class.forname) loading. or use the preprocessor, but then you would still have 2 versions

• When youtube ask me if I used to open the video full screen, I press none by mistike and save it the mozilla and now I can't open full screen more, what to do

  When youtube ask me if I used to open the video full screen, I press none by mistike and save it the mozilla and now I can't open full screen more, what to do

  Hello ronbn1, while you are on youtube.com, make a right click on a blank spot on the page, go to view page info > permissions and re - activate the approval of full screen in the list.

• My iphone 6 had belkin invisiglass protective screen installed and broken just drop a foot on soft carpet.  Anyone else had problems?

  I got the Belkin invisiglass screen protector installed on my iPhone at an Apple store in early February 6.  I held in my hand a foot on the carpet, he slipped and the screen seems broken.  I hope it's the invisiglass that's broken and not the screen.  Is this possible?

  When you drop your phone, damage is still possible.

• I dropped my phone from a height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken

  I dropped my iPhone 4S height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken and I can't touch I have all my studies on this subject two years ago and I still need the documents please someone help Please I need my pictures and documents

  Hello

  You must make an appointment at apple store in for breach of warranty replacement.

  You pay part of the cost of using iCloud upward when you configure new iphone.

  Even apple ID.

  See you soon

  Brian

• Is our HP 3520-e really broken and if so now what

  Already had this printer on our network of origin, and after a few trweaks for the configured wireless... every thing worked fine.

  I initially a copy to the preinter put in place the time and which was very good.   Have not run an analysis, however.

  Shortly after when an analysis was made, I got a "no scanner attached (or something like that) drivers scan neesds.

  However... now whenever the printer powers on screen functions deskjet (forms of copy-scan-quick... etc, but then a screen appears that says "problem scanner... Turning the and poweron printer... If still errors that componet scanner/copy is broken ' and the printer cannot copy or scan")

  Didn't add/subtract anything from system and or HP3520 drivers... etc.  HPPSDR 3.0 concludes canner and say aok... print test printer... page but nothing is printed.  Can I print from the network address of the HP to laucning IE8 and go to the test page printed in IE8?

  In adidtion... first the printer would print fine (diagnosis... text... etc) now, whenever it load a sheet of paper... whether a battery or a piece... a paper jam occurs almost instantly when the page starts to enter the printer?

  I think it's a matter of HP support... but I can't find anywhere on the site to do this upward with.

  The new HP3520-e was recorded a month or two after you received?

  Please help

  Turns out well was something else... so I was not looking for procedures that you recommend.  In fact I found a post somewhere that deals with unplug the power... etc... but the problem was solved by a simple click.

  My SO corrected it voluntarily... but she knows virtually nothing about the digitization of material/etc? !!

  What she did was with the windows open and the printer on... She went to devices and printers... one click with the right button on the 3520 in devices and printers... and choose scan.

  She said the PC immediately connected to the 3520 and analysis took place without a hitch. After that... and continuing after a few test scans/prints today... the 3520 works fine.  No message of 'error' on scan or copy.  Even analyses to other printers of home network!

  Thanks for your reply... must have been a problem in the original printer software installation and configuration?

• Non-functional graphics controller

  Hi, my computer does not start all I get is a white screen, but apparently the caps and the num lights flash a code including mine don't. I get 4 blinks which, according to the site Web of hp is a non-functional graphics controller. No one knows what might be the cause or has had this problem. I really just used to change without having to use through Hp.

  Any help appreciated

  Thank you

  Follow the instructions to the HP support document. to prepare your laptop for shipping.

• Cause of Smartphones Blackberry Desktop 6.0 blackBerry Roxio Creator 2009 to become non-functional

  Dear RIM,

  It seems that for your BB Desktop software to be as functional as we would both, you have integrated some components that cause my Roxio Creator 2009 Suite to become completely non-functional.

  If I uninstall your software and repair the following Roxio, it works well again.

  Reinstall your software breaks the suite Roxio once again, and a repair/reinstall of the suite so that your software is installed cannot be place that Roxio is most recognized as being installed properly or he sees components that prevent the installation happen.

  I tried to uninstall BB Desktop 6, fix Roxio and then return to BB Desktop 5, but after the installation of BB Desktop 6 my ability to synchronize my device (contacts, calendar, Notepad, etc) fails systematically.

  I wouldn't mind, except for the fact that my paid software is ineffective by your free software and the only potential ways that they coexist are for me to purchase and upgrade my Roxio suite.

  I do not expect you to solve my situation, I don't think you can really, but rather I am you advise potential problems that you may want to inform other people who download the software which can have situations similar to mine.

  Thanks for a great, if sometimes frustrating, range of products.

  Trevor Chapman

  Brampton, ON

  p.s. It's rather remote of you to not allow a method for me to send to you directly, but rather use this forum for 'voice' my concerns. Can't really call this committed customer service.

  Hi Ratenef,

  Sorry to hear that you have some difficulties with the BlackBerry Desktop Software. I would recommend the rest of this article and do a clean uninstall of BlackBerry Desktop software and then reinstall the version you prefer. http://bbry.lv/aZw0Yn

  Thank you

• Screen broken, rare model pavilion dv3

  Hello people out there

  I have a problem with my model
  HP Pavilion Dv3-4150so,

  I have seeem to have dropped my phone on the floor, resulting in a broken LCD screen. Now, I don't want to replace the screen LCD broken by a new one, but as I'm pretty new on this I have problems finding the right online screen. In addition, this product of the mine is very rare, and none of the providers screen seem to have in store.

  Now help out me here please, the screen has these characteristics, according to http://support.hp.com/us-en/document/c02514124:

  33.7 cm (13.3 ") high-definition LED HP BrightView diagonal (1366 x 768)

  Would I be able to buy the HP Pavilion Dv3 1075us for my laptop screen? See here http://www.screencountry.com/index.php?section=products&model=PAVILION%20DV3-1075US&brand=HP-Compaq&...

  Hello Jammerjamz,

  Have you tried calling HP to see what it would cost to send it and do replace it? If you are in the USA / Canada, call the 800-474-6836 and follow the prompts. If you are not in North America, please let me know your position and I can provide a phone number for you.

  Please let me know if this solves your problem. Good luck!

• ID/faces of the people in the Sierra pictures, pulling up the non-functional names

  Someone knows how to fix this? Is it a new setting I'm missing? I've already sent feedback to Apple.

  Photos, when I come across a photo of a person without a name, I can click on the field "no name" and a list of names appears. In the Sierra, however, the list includes names of new non-functional based on the e-mail addresses that are causing problems with my library.

  For example, if I type my name, I see three suggestions:

  1. my full name, with the thumbnail associated with my Photos 'face '.

  2. my full name with my email from Apple below address and the photo of my Contacts entry

  3. my full name with a secondary e-mail, which I have also listed in Contacts, with no tile

  If I take 1, everything works as usual.

  If I take 2 or 3, Photos makes a new person with just my name. It does not automatically fill in the rest of my name. I find myself with two entrances of the person, one with my full name and one with my name. I then merge these. This happens with all the people, not just me.

  I have the same problem. When I want to manually add a face without a name/person, I get very often 2 proposals:

  (1) the person sought with the profile photo, the first name and family name. If a picture is displayed, this means that I have already assigned photos to this person.

  (2) the same person, with or without a profile picture, with name, surname and e-mail. This proposal seems to come from my contacts, because it shows the same profile photo and mail the address I have for this person in my contacts.

  If I add the photo to the contact person, the person is added as a person in Photos. But with only the name, not the name, which is a little ridiculous, especially when you are systematically adding people and having many with the same name.

  I merge the two to get back 1 "individual" in photos, with first and last name (first and last).

  So somehow Photos is not capable of matching 'people' in photos to anyone in my contacts list. Even when you merged the two and said Photos this way they need to be put in correspondence.

• Of my horizontal scrollbar disappeared, and none of the published community solutions working - help?

  My scroll down bar (left-right) disappeared, and none of the solutions of the working community to bring it back. I tried the ' topic: Configure "approach, verified that I have the latest Firefox, tried the Safe Mode, rebooted several times, etc.

  Help would be very appreciated!

  Can you still see the search bar if you open this bar (Ctrl + F)?

  It is possible that the screen is too high and the bar scroll to fall down.

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• "CLIP" SCREEN BROKEN SCREEN NOT VISIBLE

  I just received a Portege 7200 with docking station series. The clip that attaches to the main unit screen is broken and the screen doesn't seem to work. While I can deal with the broken pliers, I was wondering if this will affect why the screen is not working? I only see an image very very dark. Of course, I use an external display, but I was wondering if there is anything I could do to make the screen of the laptop working again. Thanks for any help.

  Hello

  I'm sure that some hardware component is defect. It can be FL inverter or something like that. In my opinion, you should contact the Service partner and let Exchange them. Portege 7200 is portable very nice.

  In my view, it is useful to change it.

• Tecra A8 downgraded XP and none of the Toshiba Utilities works

  Hi all

  I just got a new Tecra A8 - it is downgraded to XP, and none of the Toshiba Utilities work (energy saving function keeys, keyboard shortcuts, etc.). When I try to reinstall - there is always an error message (missing dll or sth similar) - I tried to update the bios - couldn't - once again a missing file!

  any ideas how to solve this problem? at least the fn keys (fn key works - I see a light come on when I press - not the functions well!)

  your help, I much appreciated!

  see you soon,

  Dimitris

  Hi Dimitris

  May I ask you what Tecra A8?
  I visited the Toshiba driver page and it seems that Toshiba provide XP drivers for two different units A8 PTA83Eand PTA82E.

  You should be 100% sure that you are using the correct drivers!
  In addition, Toshiba released the Installation Instructions of the document on the page and to my knowledge it s necessary and important to follow this line of installation guide. The proper installation order is necessary!

  So take care and check again