CRIO not visible under MAX

Similar Questions

• cRIO not detected in MAX

  
  

  To see the cRIO, you will also need to have installed LabVIEW Real-time Module. Versions of boxes to tools/Modules must be the same as the version of LabVIEW, they are used with. In your case, if you are using LabVIEW 2011 SP1, then you must install the 2011 SP1 real-time module. If you have not yet installed it you will probably need to repair the NOR-RIO driver after installing the module. Because you are the 2011 SP1, your other option would be to update your driver to RIO to 4.1 after installation instead of fix 4.0.

• USB storage not visible under network in Windows 10

  I recently bought EA6900. I have a hard drive connected to the USB. My Windows 7 computer, I could see the router subnet (like a computer) and I see the drive under.

  Yesterday, that I've upgraded to Windows 10. The router appears as a network device. When I double click, I get to HTTP interfaces. There is no more, even if, like a computer in the network tree.

  I checked Windows 8.1 Tablet and it shows in the same way.

  Network discovery is turned on. The disks have no security file - they are open to users of the network.

  Is there another step to get direct access to the disk in Windows 8/10?

  Because your router works fine, it won't affect your computer's settings. We suggest that you play with the settings.

  To access easily your hard drive, you can map the drive on your computer. You can follow the steps below:

  * Open the computer by hitting on any fly in the right edge of the screen, quilting research (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording computer in the search box, type, or by clicking and then by typing or clicking on computer applications.

  * In the menu bar, press or click on computer and then tap or click map network drive.

  * In the drive list, tap or click a drive letter, you can choose any letter.

  * In the folder box, enter the path to the folder or computer, press or click Browse to search for the folder or computer. To connect whenever you connect to your computer, select reconnect it to connection box.

  * And then click Finish.

  Let us know if you need assistance.

  Chiqui-17359

  Linksys technical support

• Trackpad, mouse, shared folders not visible under DOS.

  Dear people,

  OK, so I installed successfully the BACK 6 in Fusion.

  (1) how the VM to see my trackpad and mouse? I don't see the options for this device to virtual machine settings.

  (2) BACK is not to see a folder shared that I specified. How to import files in the virtual C: drive without it? (not everything is on diskettes that can be converted into images of floppy disks, in fact most of the files are not)

  Thank you!

  Ctein

  > Ctein wrote:

  > Dear people,

  > OK, so I installed successfully BACK 6 molten.

  >

  > (1) how the VM to see my trackpad and mouse? I don't see the options for this device to virtual machine settings.

  >

  (> 2 BACK) is not see a shared folder I specified. How to import files in the virtual C: drive without it? (not everything is on diskettes that can be converted to > images of floppy disks, in fact most of the files are not)

  >

  > Thank you!

  >

  > Ctein

  1. install the mouse driver in the BACK machine.  See the page of Zamba of good tips for creating virtual machines in BACK.  http://www.scampers.org/Steve/VMware/

  2. because the shared folders feature requires VMware tools to install; and since there is no BACK VMware Tools package, you can not do this.  Follow the tips on the page links above to set the standard Windows file sharing (LAN) / Samba.

  Robert

• When I explore all users, my favorites folder is not visible.

  Original title: my favorite file is damaged.

  My Favorites folder is not visible under my username when I explore all users. When I try to copy a Favorites to a backup disk, it does not allow me to. It is said that the folders and files already exists.  What can I do

  Hi Tampaleif,

  If you are in the type of menu of classic start-> right click on the taskbar / or-> clock-> properties-> Start Menu customize-> favorite display-> ok on all screens.

  on the other

  Right click on the taskbar / or-> clock-> properties-> Start Menu customize-> Advanced-> Tickmark Menu preferred-> ok on all screens.

  I hope this helps.

• cRIO-9002 - sees in MAX but Can not control

  I have a cRIO-9002 with chassis cRIO-9201, I try to configure so that I can use it for a new project in the lab that I am working. So far I was able to get on our network and am able to see to the MAX; However, once I click on it in MAX, MAX is here trying to cool off for a while and system resources all is listed as not available (once MAX gives up on refresh). I'm not able to see the installed software and it disconnects frequently. I turned on the CONSOLE OUT on the cRIO and here is the result:

  [2J
  General software embedded STPC BIOS 2000 (tm) revision 5.2

  Copyright (C) 2003 General Software, Inc.

  Copyright (C) 2004 National Instruments Corp.

  Controller OR cRIO-9002

  [23; 01 H (C) 1996-2003 General Software, Inc..]

  STPC - 5.2 - 01DE-EB2E [01; 01 H [06; 01 PM
  00000016K low memory passed
  00000512
  00000589

  00000000K Ext memory passed
  00031744 [08; 01 pm [s [u [08; 01HWait...]]]

  PCI device table.

  Bus Dev Func VendID DevID class Irq

  0 b 00 00 and 104 has 0201 Host Bridge

  0c 00 00 104 a 0210 ISA Bridge

  00 0D a 00 104, 0229 IDE Controller 11

  0E 00 00 104 a 0230 Serial Bus 11

  0f 00 00 104 a 0238 Ethernet 11

  00 18 00 1093 705E 11 unknown device

  1F 00 00 104 a 0981 Ethernet 10

  [2JBIOS review: 1.1.9 (10/08/04)]

  Firmware revision: 10.1.94

  LabVIEW RT the start player...

  FAT16

  Jump to 07E0:0000

  Checksum: 018D9C6A

  Executive in time real LabVIEW

  Construction time: June 21, 2011 01:17:21

  (C) copyright 2002-2011 National Instruments Corporation

  MAX system identification name: englab-fpga

  LabVIEW time real Single-Core Kernel

  The initialization of the network...

  Device 1 - MAC addr: 00:80:2F:0 A: 7E:E2 - 131.151.115.38/22 (primary - auto)

  System Web server started

  NOR-RIO 4.0 Server started successfully.

  NI-VISA 5.1 Server started successfully.

  Welcome to LabVIEW Real-time 11.0

  FTP SERVER ERROR: Cannot start threaded

  FTP SERVER ERROR: Cannot start threaded

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  FTP SERVER ERROR: Could not create threaded command

  Of course, there is some kind of problem here, but I don't know what it is. Any ideas?

  Hi nslogan

  What version of the drivers OR RIO, LabVIEW and LabVIEW RT do you have installed on your computer?

  OR MAX was able to communicate the fine before? Nothing changed?

  Is your cRIO executes any RT executable launch, request or communication with an FTP server?

  If your computer has all the software and drivers may be easier trying to format and reinstall the cRIO, it doesn't take long and it takes a few simple steps.

  How do I format my target in real time and reinstall the software?

  Concerning

  R. Esteban

• cRIO-9025 is not recognized in MAX

  I have the cRIO-9025 controller connected directly to the computer, but it is not recognized in MAX.

  I tried to manually add the IP address, but that does not work either.

  I've disabled most of the virus protection software and added to the exceptions in the firewall for the software OR.

  I am running Version MAX 5.0.0f1

  cRIO-9025 with

  • NEITHER 9205
  
  
  • NEITHER 9208
  
  
  • NEITHER 9214 (x 2)
  
  
  • NEITHER 9401
  
  
  • NEITHER 9411
  
  
  • NEITHER 9485
  
  
  • NEITHER 9512

  What type of network are you on? Is it a computer University (I'm trying to understand why you can't change the settings of the firewall)? You can add measurement and Automation Explorer as an exception? You can add UDP 44525 as an exception? Another thing you can do to really tell if it is a firewall problem is to try another computer with a different firewall configuration (but with the same driver of RIO) to see if the cRIO is detected it. It looks like, based on my experience that something prevents MAX to communicate to your target. Your cRIO has an IP address? If so have you tried it ping via the command prompt. To get the IP address (of the kind that you can ping), you can use embedded in the cRIO out console.

  

• Report not visible in the address bar icon have installed the latest version, works with Safari.

  Icon not visible in the browser bar Firefox 40.0 report. Report of uninstalled, installed report 3.6.1507.14; restart the Mac under OS X 10.10.4 Yosemite. Still no report icon. Report NB icon present in Safari 8.0.7 and extras Menu.

  I'm not entirely sure about the feature you request on the subject, but here's what I could find:

  • http://www.Trusteer.com/rapport-icon-not-showing
  • http://www.Trusteer.com/support/how-can-i-tell-rapport-working and support: http://www.trusteer.com/support/submit-ticket

• My DSC Certificae signature is not displayed under the link "Your Cerificate" and only encryption is indicated.

  I have a USB DSC(digital signature certificate) token, with the two 'encryption' & 'Signature' certificates downloaded into it.
  Two certificates are visible in the middleware of my USB Token. As you watch the certificate under 'Advanced-> view certificates' and 'your certificate' tab, I don't see my "encryption certificate".
  Why is my UBUNTU system not get two certificates.

  The problem occurs with operating systems-
  1 UBUNTU LTS 12,04 32-bit edition
  2 MAC OS 10.8.4

  However, the same token DSC works fine on my windows machine it is to say the two certificates are visible under the CertMgr-> personal tab.

  Also, just to describe more, the DSC of the token provider and even works on some UBUNTU systems too.

  Your USB Token device is listed as a safety feature in Firefox?

• When you customize the bar of the add-on, separators ("" | "") are not visible. How can I remove them?

  Not only are they not visible, they are no longer selectable. They /do/ normally appear (that is, when not customize toolbars). Under Firefox Linux Mint 15 22.0 (Olivia: x 86-64).

  Your toolbar customizations are stored in the localstore.rdf file in your Firefox profile folder currently active. This XML file is difficult reading and I don't remember seeing a good documentation on how to modify. If you want to give it a try, please make a backup first.

  If the file is corrupted (or most corrupt, according to the case), you can rename or move it Firefox will generate a new one with default settings and you can start customizing from scratch.

  With the road, it actually seems that you should be able to find and remove the separators.

    <RDF:Description RDF:about="chrome://browser/content/browser.xul#addon-bar"
      mode="icons"
      collapsed="false"
      currentset="addonbar-closebutton,stylish-toolbar-button,spring,downloads-button,separator,fireshot-Capture-Button,greasemonkey-tbb,noscript-tbb,fiddlerhook-toolbar-button,status-bar" />
  

  Why give a try:

  Open your current Firefox settings (AKA Firefox profile) folder using

  Help > troubleshooting information > button "Open Directory".

  Switch back to Firefox and output

  Break, while Firefox ends his cleaning, so make a backup copy of localstore.rdf (e.g., localstore.0808) and open the rdf file in a text editor to find and change the separators of the addon ramp.

  When you restart Firefox, your changes should be obvious.

  A little luck?

• No devices under Max

  Hello again everyone.

  I looked through the other posts and have tried all suggested without a bit of luck. (other that a complete uninstall, re - install)

  I'm forced by my Department to upgrade systems to Windows 7 64-bit and a computer Lenovo ThinkCentre shinny new M series.

  My problem is with MAX v5.0.  I have a PCIe-6351 and a PCI-6052E installed in the system, windows recognizes the card and according to the Device Manager, everything works fine.  The problem is that devices are not appear in MAX under the tree of devices and Interfaces.  I'm refreshing the tree and it is said, it is looking, but he never finds anything.  I used the tools > Reset Configuration option and have nothing done.

  Could there be a security features that are installed that may stop MAX from the voting systems hardware correctly?  Only, I only ask because I was told that some hard enough security practices will be implemented with the new computers, I am about to receive.

  I gained administrative rights and run MAX under an administrator account, but still no luck.

  This is a new installation and I received no errors, everything seemed to install correctly.

  Any ideas how to solve this problem?

  Your help is as always, very much appreciated.

  Steven M.

  Well, my problem is solved. MAX recognizes all my devices and everything works as it should.  The solution is a bit anti-climatic

  The source of the problem was that NEITHER System Web Server (NiApplicationWebServer) service did not, who stopped the mDNS responder service of the race, which, in turn, stopped the service of charger OR to run.

  Try to manually start the MSDN OR system Web Server & National Instruments that service would result in an error 1075, you try to start the device loader neither resulted an error 1068.

  My Department of systems had no ideas on what safety measures or protection of viruses on their end parameters might be the cause of the problem.

  Solution:

  Control Panel > programs > programs and features > National Instruments software > uninstall / change > measure Automation & Explorer > repair.

  After the repair, everything works fine, and all of the above services are running.

  The installation process has shown without errors or problems, so I am at a loss as to why he needed repair.  But whatever it is, problem solved.

  

• PXI-8532 DNET card is not detected in MAX

  Hi all

  I use NI PXI-1031(4 slot PXI chassis). I have the following cards in the respective locations
  Slot 1 = controller PXI-8106
  Slot 2 = PXI-6259 card (I)
  Location 3 = card(DI,DO) PXI-6509
  4 = Card (DNET) PXI-8532 accommodation

  Max (Measurement & Automation Explorer), I expect the cards above (PXI 6259, 6509 & 8532) to be detected under devices and Interfaces. But only cards and DIO are detected in MAX under deported systems > PXI > devices and Interfaces.
  PXI-6259 (PXI1 Slot2)
  PXI-6509 (PXI1 Slot3)

  The unit net card, PXI-8532 is not detected in Max MAX shows / detects the DNET card?

  In MAX, I chose the menu Tools > NOR-DNET > RT Hardware Configurations. Then a window prompt you for IP address of RT. After you enter the IP address, I pressed OK. A message appears that no device is found.

  Can someone help me how to detect card DNET in MAX and make the configuration of the port DNET?

  DNET - 1.6.4 driver version

  Thank you
  Raja

  I try to answer two questions:

  1. the new APUI is compatible with the former, but if you use screws with the old APi you need to replace the screws with the new. There is a white paper related to the download page and here it is again that explains how.

  2. the devicenet driver does not yet support the plugin for the view of the PXI chassis. It appears under devices and Interfaces, and the name is not editable either. Currently the driver uses the numbers in the order of detection if several cards are present.

  Two things will look in our next version before the end of this year.

  DirkW

• HP 15 laptop: DRIVE HARD DO PARTITIONNE NOT VISIBLE AND INITIALIZATION is NOT POSSIBLE

  My laptop worked fine until that currently when my brother introduced it is impossible to return to the start and the error message indicating that "no boot found device, took it back to where I bought it and they have installed a Windows 8.1 which worked for about 3 hours, then began trolling." tried to restart it to see if it will win its normal pase but it never restarted, it opens but could not pass the HP logo in the middle of the screen, when I took it back to the shop to check. They tried to reinstall the operating system, but the hard drive partitions are currently not visible. Help, please.

  This message indicates that the file system is damaged, and as a result, one or more of the boot loader files is no longer working properly.  The general solution - that no matter what RENOWNED repair shop would know well - is to start repairing Windows Media and run Startup Repair machine, probably three times.  If that did not set her, the next step would be to start the computer from a hard disk utility and run a file system check.  If defective, which would be more likely to say that the hard drive was not - and then only, the reader will have to be replaced and windows resettled.

  In addition, Win8.1 comes with quick start already on.  This force the machine to fall into a new form of hibernation when you stop - preventing access to the disk partitions hard while they are in this State.  Once more, any store repair FAME SAURIEZ cela and told for sure you.

  Looks like where you bought is occupied by people who are incompetent when it comes to diagnose and repair Windows PCs.

  I assume the unit is no longer under warranty, otherwise you would have contacted HP for repair.  But, that being said, your first step should be to contact the HP Support to see if you have repair options: Contact HP customer service | HP® customer support

  An alternative would be to buy a new hard drive, order of HP recovery materials and use it to reinstall the machine.  See the details in the link: HP computers - getting HP discs recovery or a USB HP recovery disc | HP® customer support

• New folder in Windows Explorer is not visible until I press refresh

  Hello!

  If I create a new folder in Windows Explorer to a network drive (which is a DFS share) under Windows 7 Professional 32 bit, the new folder is not visible until I have press F5 (refresh). Is there a fix or a solution to this problem?

  Thank you

  Kampi

  Hi kampi,.

  You can wait for a while and do not try to rush by pressing f5, because it can take a while to showup on network drive.

  To work around the problem, you can try to disable the Client of Microsoft Networks in the LAN connection properties

  a. open management of network and sharing Center.

  b. go to the Local network connection and click Properties.

  c. clear the Client for Microsoft Networks option and check.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista backup file is not visible

  Using the backup feature in Vista, I managed (under Vista) saved 200 + GB of my PC hard disk laptop.  I know that it worked because:

  1 - unused space on the hard drive laptop declined significantly

  2 - I was able to restore files from the portable hard drive

  HOWEVER, according to the help Windows, a file "Backup set Date" was created, but I can't - it is not visible.  How can I make it visible?

  Thank you

  Hello

  Check if the file is hidden:Show hidden files

  Backups are saved in this format: ------\Backup Set . For example, if your computer name is computer, your backup location is E, and you saved on April 2, 2006 at 16:32, that the backup occur in the value of E:\Computer\Backup 2006-02-04 163200. You would right-click the folder named Backup Set 2006-02-04 163200 to delete this backup.

  When you perform a full backup, a backup folder is created and labeled with the date of this day. When you add updates, this date remains the same, but your backup is not expired. The next time you perform a backup completes, a new backup folder is created and labeled with the date of this day, and updates are then added to that new folder. Do not remove the current backup folder.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.