Cruzer Titanium not recognized in my laptop after creating the bootable WIN

Similar Questions

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• iPhone not recognizing only no internet after installing the new cable router attached to the Airport Express Terminal.

  My configuration is modem cable to Airport Express which is connected wireless to a Time Capsule.  I am able to surf with my laptop, it's the iPhone 5 s is no longer is grateful for the internet.

  When I turn off the wifi on the iPhone, Airport utility displays only the Internet icon with the green light. The cable modem has no possibilities of wifi so I do not understand to THE.

  When I turn on wifi, the wifi devices present with green lights and the internet shows a yellow light.

  Through the different ways for a solution.  Power cycling my net and telephone.  Forget this network don't forget the password and I have to choose the wifi and enter a password. Still seeing internet.

  Why should you have the Airport Express? The Capsule is also a WiFi router.

• TEAC sx-60 mouse and keyboard not recognized on my laptop but on my computer, it works fine

  TEAC sx-60 mouse and keyboard not recognized on my laptop but on my computer, it works fine

  It is the responsibility of the manufacturer to provide drivers.  If they are not, you will not be able to get from Microsoft.

• On laptop CD/DVD drive is not recognized/is missing. Having read the other topics, problem still not solved.

  I'm on a computer laptop gateway and my cd player does not work all of a sudden. I can eject and put CD in there and it will hum for awhile, but nothing will happen. I went to Device Manager and it is not yet listed. I read the other topics and the problem is still not resolved, please help. Also, my HKEY_LOCAL_MACHINE folder has not all folders in there, so I can't go to system/etc to delete anything because there is nothing to remove. Thank you for your time

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers to check with the system manufacturer to see if there is a firmware or drivers for your if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My Cd/DVD drive is not recognized on my laptop

  When I insert a CD/DVD in my laptop Toshiba, it does not appear and the computer does not play the CD/DVD

  Hi Pamela,.

  Your CD or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or a DVD. This issue would have occurred after you installed, uninstalled or updated a program.

  Perform the steps from the link below and see if it works.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 ( )http://support.microsoft.com/kb/322756/)

  Good day!

  Answer please if you have any questions.

• Windows 7 is not recognized on my laptop satellite

  My windows 7 is no longer recognized by my laptop and the button at the bottom of my laptop has been rubbed by far.

  Is it possible to fix this or am I required to pay for a new key?

  Most Toshiba laptops comes with the operating system preinstalled, with the so-called recovery image. This recovery image contains the operating system, all necessary drivers, Toshiba specific tolls and public services and some additional software. This version of the OS is activated and should not be enabled at all.

  The sticker product key belongs to this recovery image and cannot be used for any other OS activation.
  I put t know which version you use, but if you use the version installed with original installation disk Microsoft this product key is useless.

  If you have created recovery disk using this drive and install original and already active Win7 version. If you want to keep the preinstalled OS you must purchase a valid OS license.

• Drive HARD of Equium A200 is not recognized on other laptops Toshiba

  I had an A200 equim but it is now broken, I wanted to put my hard drive in an another Toshiba, I tried the A100 as a friend had one, but would not work. I have another friend who has an A300 that I'll try the weekend but don't know if it will work and not more.

  Any idea of the reason why the hard drive A200 will work in A100? Sorry, my knowledge about computers is not great?

  Basically, I bought a label software I was using, I installed on my computer laptop partners and emailed the company and they said I have to buy a new license (which cost me 200usd!) for a new laptop!

  I bought a second hand A100 and managed to the key code of hard drive, however when I print there still the watermarks of the company on the labels is basically useless.

  I managed to get the files on disc hard when he was in the linux computer, well, a friend for me anyway!

  Post edited by: welshmatt983

  Are you sure that your A200 HARD drive is not faulty?
  > I tried the A100 as a friend had one, but would not work
  How to understand this?
  HARD drive is recognized in the BIOS?
  If you try to use a disk bootable for installing operating system can configure detect this HARD drive?

  Sorry, but this software problem is not understandable for me and you should clear it with the Publisher of the software.

• 1.5 TB external DRIVE not recognized on various laptops disk

  Hello

  I was wondering if someone could help me.

  I bought my 1.5 terrabyte toshiba external hard drive just for more than a year. It works fine on my other computer, laptop and cell phone from my boyfriend, but when I joined four other new laptops (all different brands) recently it was not recognized at all on these laptops.

  Is there something wrong with my outside or something on these computers it prevents to be recognized? Do you know how I can fix this problem?

  Thank you very much!

  Hello

  And if you connect the external HARD drive to your boyfriend s computer laptop, everything is always ok? Only problems with new laptops?

  Well that s really strange have you tried another USB cable and different USB ports?

  Maybe on the new laptops the antivirus or firewall blocks access to the external hard drive. Check your security software and to allow external devices.

• Envy of HP dv7 - 7323CL: HP driver not available for my laptop after the WIN10, now said to use Windows updates

  I think I got this, just need confirmation, before I was going to HP.com to find udpated pilots, then site Web HP said if computers purchased after August 2013 have been tested, I think you could get the updates via the HP with WIN10 site.  My pc model was purchased in February 2013, it seems now that I have WIN10 there is no drivers for me page to go it says that I need to go to the updates of Windows.  Before I upgraded to 10, I was 8, and I had full access to the drivers download through HP.com page.  However, I think I understand now, I had a problem with the Norton Removal Tool, after using it, it makes my pilot biometric and disabled the Windows Hello to WIN10 - the reader of fingerprints for a connection.  The pilot appeared to be corrupted and I needed to just reinstall.  I finally found an old forum via HP where someone has had the same problem that I did and they are found to include a link for the driver, and it worked for my model of laptop and solved the problem.  After some tests, I uninstalled the driver and learned at that time, after the driver is uninstalled, I can go to Windows Update and it will search and find the driver that I uninstalled and offer me the download to reinstall.  That's cool.  So, I understand now that even now if the drivers are not available for my model via HP.com, I can now just do a search through Windows Update and it will fix the problem, only after that I uninstalled it through Control Panel, Device Manager, once I uninstalled, restarted the computer, then did the updates of Windows It downloaded the driver, like when I went to the Control Panel, Device Manager, I saw the biometric driver in good working condition.  This is the case now with who need driver updates / reinstall?  (Note: to update the drivers, I know too much, you can go to control panel, Manager of devices, and then click the driver and select Update driver software.)

  Hi @MVP1 ,

  Welcome to the Forums of HP Support! I have, I understand that you are concerned about Windows 10 updtaes. I'll be happy to help you.

  You are right.  Microsoft took the drivers for this computer.  All updates will now come from Microsoft.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• My joystick sidewinder precision 2 is not recognized by my laptop 64 bit.

  I have a 64-bit desktop. When I attach my Sidewinder 2 accuracy him the joystick is recognized and works.

  I also have a computer laptop 64 bit. When I move my joystick Sidewinder 2 precision is not recognized and doe does not work

  Cyrus Desai

  Hello

  1. you receive an error message?
  2. which version of the operating system you are using on the computer?

  Method 1:
  If you have more than one joystick or gamepad is connected to the computer, only the joystick may not get detected on the laptop.

  Method 2:
  If you use windows 7, then you can run a convenience store and check:
  For more information, see: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 3:
  I also suggest to check for any error message or error code in Device Manager.
  To access Device Manager, use either of the following methods:
  a. Click Start, click Run and then type devmgmt.msc.
  b. right - click on my computer and click on manage, and then click Device Manager.
  c. right - click my computer and click Properties, click the Hardware tab and then click Device Manager.
  d. type the following command at a command prompt:
  Start devmgmt.msc
  You can check the link for more information:
  http://www.Microsoft.com/games/combatfs2/support_gamecontrollers.aspx#Q2
  http://www.Microsoft.com/games/combatfs2/support.aspx

• Receives the error "USB device not recognized" but nothing is attached to the laptop

  I get "Device not recognized USB" popping up - I have no devices attached to my laptop USB

  Hi jamescrighton,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-is-not-recognised-but-no-devices-are/d50b8f81-478A-4020-8FD0-a44ba44ab440

  I hope this helps!

• LIFECAM VX-1000 WEBCAM NOT RECOGNIZED ON MY LAPTOP ASUS

  VX-1000 camera is not recognized on my windows 7 64 bit operating system.

  I tried to install the software from the microsoft Web site, and it gives me an error message "THERE IS No. CAMERA CONNECTED to THIS COMPUTER"
  WHAT CAN I DO?

  Hi BaskijeLlupa,

  This problem may occur due to already installed a Logitech Webcam or if the LifeCam drivers are incorrectly installed.

  I suggest you try the procedure described in the article and see if it helps.

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• X200T not boot from any device after updating the Bios v3.00

  Hello

  I recently updated my bios to the latest version, the v3.00 X200T and now it does not start from any device - everything I get a blank screen after the initial bios starts upward.

  The bios seems functional and it recognizes all the devices I attached, as well as the internal hard drive. However no matter how to start the machine it does not start. I tried to set the boot order in the bios, using F12, F11 for recovery, remove the internal HARD disk, used all the USB ports, etc... -all I get is a blank screen after the initial splash screen.

  No beeps to indicate any problems, and I tried to reset the default settings of the bios, remove battery & power - all to nothing does not.

  Any ideas?

  I updated the bios of many laptops and desktop computers in the past, but this is a new one on me...

  I hope someone can help.

  Darren

  It seems that it also happens to X 200 owners who upgrade to version 3.01 of the Bios.

  mc2sgp has posted a response in this forum that worked for me:

  "I have the same problem and found the way to a temporary solution."  Go into the BIOS (you should always be able to press F1 to go into the BIOS) and go to Config-> CPU Intel VT - d characteristic of-> and disable it.  You should now be able to start normally in your operating system. "

  At least, I can now start my camera.

  Hope this helps others.

  Darren

  ADMIN edit: tagging this post as the solution to guide others to the bypass.  Lenovo will remove the BIOS on the web and replace it with an updated version that resolves these symptoms as quickly as possible.

• El Capitan will not install. Window disappears after pressing the button install.

  Hello world

  Looks for some install help. I try to install El Capitan for my Mac Mini. Here are some features:

  Mac Mini (mid-2011)

  OS X Yosemite 10.10.5

  Intel Core i5 2.5 GHz

  Question: El Capitan does not install anything after clicking on the button after choosing the drive. The window simply disappears and nothing happens.

  I have read all the threads to locate the file "install OS X El Capitan", but it leads to the same question.

  What other options can I here? I tried to create a new admin user to install the operating system, restarted my computer, re - download the file, etc..

  I ran out of options here. Help, please!

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.