CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problim

Similar Questions

• Printer stops working when you try to print.

  Original title: printer

  I have a wireless printer and my laptop keeps not working every day. I have uninstall the printer and then reinstall and it works again, I lost several articles because I cancel printing and reinstal and then the printer, try, and try printing again. However some elements I can't reprint so I lose them. It shows in the print spooler, but I can't make it unles cancel and uninstall and reinstall

  Hello

  1 do any error message if the printer no longer works?
  2. What is the brand and model of the printer?
  3 did you recent hardware or software changes to your computer before this problem?

  Method 1: If you are having the same problem again then, try the steps in the article.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2: To update the printer drivers and check.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• My windows Explorer stops working when I try to use the file menu on a file.

  My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) how often does the problem occur?

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode.

  Please follow the link on how to start the computer in SafeMode below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

  WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• The Setup program stops working when you try to uninstall the installer of qwest

  the Setup program stops working when you try to uninstall the software

  the Setup program stops working when you try to uninstall the software

  Hello

  Try uninstaling with revo uninstaller (download the trial for the link.)

  link

  Use the advanced uninstall, method, delete the associated files and reg keys.

  Good luck

  Chyavan

• When I try to print from captivate it can be using the print or print from the browser menu widget it only shows half a screen

  When I try to print from captivate it can be using the print or print from the browser menu widget it only shows half a screen

  I use 7 Captivate. I need the user to be able to print the results. The certificates are not an option. They are too limited. When not published in HTML 5, I have a print widget. He wants only half of a print screen. If I publish to HTML 5, I can then the file menu of the browser user to print. However, she still shows only a mosquito net. How can I fix this.

  They must be able to print the results page. I've included a sample using the login screen. Below you can see what I see on the screen of the printer browser

  

  This is what it must have printed.

  

  What is the cause? Can anyone help?

  It ends up being a problem for chrome browser after all. Easy correction. Use Internet Explorer. This works well for us. Our intranet uses Internet Explorer by default.

• Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.

  I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.

  An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.

  Press Win Logo key + R, type: fsmgmt.msc

  You see your own actions?

  If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• SE charger of HEALTH professionals has stopped working when you try to install a game.

  I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games.  I searched and found others have had the same problem with this error message.  I found help for Vista users, but there is nothing for the support for Windows 7 users.

  I am running Windows 7 Home Premium 64 bit on a B-311 HP 20 Pavilion with 4 GB of ram.  When I first had this system, I had 8 Home Premium 64-bit Windows installed on it and the game installed without any problems.

  Here are the details of the error message I get:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Start_Here.exe
  Application version: 2.0.1.4712
  Application timestamp: 4402d 429
  Fault Module name: Start_Here.exe
  Fault Module Version: 2.0.1.4712
  Fault Module Timestamp: 4402d 429
  Exception code: c0000005
  Exception offset: 00003045
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 79ee
  More information 2: 79ee8ce1c976216026f008da08a6a3a9
  Additional information 3: c6a2
  Additional information 4: c6a28a6a42863f9b270bcf8e85f99d62

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  I tried even to run the installation with Windows XP SP2 compatible mode set up option and you still get the same error message.

  chk if the game is compatible from this link

  http://www.Microsoft.com/en-in/Windows/compatibility/error/index

  If not install it in compatibility mode and click on the link for more information.

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  If you still have problems with the game contact he is a developer or ask their support for more info...

• Windows Movie Maker 6.0 Vista immediately stops working when you try to open.

  Hello!

  I've been all around the internet trying to solve this problem, but nothing has worked so far.  When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:

  "Windows Movie Maker has stopped working".

  There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.

  I tried to open in safe mode, but it still fails to open.  I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.

  Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed.  That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times.  Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open.  I was able to record some videos.  After a few days, my computer day and WMM 6.0 is more open more.  I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]

  I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker.  However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files).  I do not think that the file type is causing the crash, but I guess that's always a possibility...

  I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place.  Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD.  I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6.  Windows Movie Maker 6.0 is much better, on the rare occasions that it works.  Do you think I should use Windows Movie Maker 2.6 now?

  Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0.  The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention.  Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: BEX
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_6f96
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0378415b
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6f96
  More information 2: 39ee662180b2f2ed5cfc67e5914ae855
  Information additional 3:6366
  Additional information 4: 8328a225406b340b1b7b5f591aa5688c

  Additional information about the problem
  Bucket ID: 1197617492

  -----------------------------------------------------------------

  Signature of the problem
  Problem event name: APPCRASH
  Application name: MOVIEMK.exe
  Application version: 6.0.6001.18341
  Application timestamp: 4ad5c77d
  Fault Module name: StackHash_1703
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 032e41a4
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Information additional 1:1703
  More information 2: 2264db07e74365624c50317d7b856ae9
  Information additional 3:1344
  Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

  Additional information about the problem
  Bucket ID: 1909412930

  -----------------------------------------------------------------

  The "BEX" error happens much more frequently than the "APPCRASH" error  In addition, I have Windows Vista home premium installed and a 32-bit operating system.  I don't know how to read the problem reports, or if it's all the information you need.  I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!

  Thank you!

  Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"?  Other times a reinstallation of the program crash can fix.  As you can not do with Movie Maker the next best option is to try the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Have you tested another user even if you need to create one to do this?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See how many unsigned drivers, you have running on your computer.  This article will guide you on the instructions, but all you need to do is type sigverif in start run.

  How to identify unsigned with sigverif utility in Windows Vista drivers
  http://www.WinVistaClub.com/F34.html

  Vista Movie Maker DEP Fix
  http://www.YouTube.com/watch?v=tkpURM4FFt0

  In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.

  There are a few suggestions that Nero is a problem if you run that at all?

  Windows Movie Maker has stopped working
  http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/

  If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  http://www.Google.com/search?q=Movie+Maker+DEP+Vista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

• IE9 stops working when I try to download

  I have a laptop HP Envy 64-bit running IE9 and windows 7 and it stops working whenever I try to download from the internet. Latest patch I tried was to return to the top and factory fresh computer.  Immediately after the updating of the factory (with all updates completed no) IE9 would allow downloads. A few hours more later after all recommended what IE updates (some 150 of them) began to crash again.  I put the olny software is office professional academic 2010.  Rank of microsoft to try to help and they said that the OEM is a specific set of HP and I'd better try using their share.  Help, please.

  Hello Shelly,

  You must uninstall all 3 entries speak you and then restart the computer when finished.

  Kind regards

  DP - K

• Photoshop no longer works when I try to print a specific image.

  I use Photoshop C6.  I am trying to print a photo I printed before, and now when I try to print again, it mean PS has stopped working.  This happens only when I try to print.  I don't get the same message with other photos and printed successfully other photos after the accident.  I'm confused as to what's wrong with this one specific image that makes the entire system to stop working.  I could use some help I need to print this picture right for a customer as soon as possible.  Thank you very much!

  Hi Denise,

  I suggest you print the image of any other application outside Photoshop and see if you are able to print it or not.
  Also try to reset the printing preferences, click on file > print (hold down the space bar).

  It should reset the printing preferences, reset the settings and then try to print.

  Concerning

  Tanuj

• Virus scan Avira would stop working and freeze the computer whenever an analysis was carried out. Tried to uninstall and reinstall, but still had the same problem. Impossible to uninstall now due CCPLG. XML error.

  Hello, I have been using Avira anti-virus on my computer for the past two years with no problems.  I run a scan on my computer every day and noticed problems with it a few days ago.  The analysis would be about 21% when he would stop scanning and freeze my computer.  The RAM would be also be maxed out at 100%, and I need to restart the computer manually.  When I ran the scan in safe mode, it worked fine, but then continued to not work when the computer is not in safe mode.  I would also get a security alert Windows telling me that Windows did not antivirus software on this computer.  I tried to do a system restore which goes back to the day before the problem started to happen with the scan, but I still have the same problem.  I tried to uninstall the program again, but I get the message: Setup could not determine feature control file, or was not able to read it properly the. I also received a message about CCPLG. XML. I don't know what to do at this point or what was wrong in the first place with my antivurus software, but I feel that I continue to do worse with everything I want to do about it.  If you can offer any help with this problem, it would be much appreciated.  I have to go to work now, so I'll check tomorrow and hope that someone decided to go back to me.  Thank you.

  There are similar problems listed in the Forums of Avira.

  Have a read of the info in them; who can help you:

  http://Forum.Avira.com/WBB/index.php?page=thread&ThreadId=77368

  http://Forum.Avira.de/WBB/index.php?page=thread&PostID=729964

  Both above the Avira Forum entries have the same problem, CCPLG. XML, like you with solutions provided.

  http://www.Avira.com/en/support/kbdetails.php?ID=135

  Avira has also a manual uninstall. read the link above.
  Try this: uninstall/reinstall Avira as it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:http://www.avira.com/en/support/

  Contact the Avira Support on this problem with their anti-virus software.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also, try asking the security of Vista and the Privacy Forum.

  They know a little about the Avira software there.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  See you soon.

  Mick Murphy - Microsoft partner

• installation of Windows services has stopped working when you try to install the software

  Unable to install software.tried cmd method, nothing happens

  Original title: installation of windows services has stopped working

  Hello Mohit,

  Welcome to the Microsoft Community Forums.

  I understand that you have a problem with the Windows Installer service.

  But I would like to know some more information on this issue to help you better.

  (1) what is the full error message?

  (2) what software are you trying to install?

  (3) have you tried to install any other software?

  (4) when you say, "tried cmd method" what exactly mean you?

  In the meantime, please try to follow the following suggestions to solve the problem.

  Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.

  How to fix problems with the Windows service install

  http://support.Microsoft.com/kb/2438651/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
   

  I hope this helps. Otherwise, feel free write us back and we will be happy to help you.

  Thank you.

• "Windows host process (Rundll32) has stopped working"-when you try to uninstall/remove programs

  Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.
  Please help, I need to uninstall something!
  ---------------------------------------------------------------------
  Windows host process (Rundll32) has stopped working
  Signature of the problem:
  Problem event name: APPCRASH
  Application name: RunDll32.EXE
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc637
  Fault Module name: StackHash_9629
  Fault Module Version: 6.1.7601.17725
  Timestamp of Module error: 4ec49b8f
  Exception code: c0000374
  Exception offset: 000ce6c3
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057
  Information additional 1:9629
  More information 2: 9629b7be96a6d05c3ae74dcb4df31847
  Information additional 3:2716
  Additional information 4: 271690c76c60b0182163ae26acc5f429
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hello

  Method 1:

  I suggest to set up the computer in a clean boot state, then try to uninstall the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• SE error message "Windows Explorer has stopped working" when you try to search for document files

  Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727

  When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!

  Please help me

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Hope this information helps.