CSACSE-1112-K9 - v4.2 - config/device recovery

Similar Questions

• error in config to recovery

  vista 32 OS ibt m8100n

  System crash-screen black cursor flashing

  F10 base system checks, all good memory and HD.

  On the error code - config purple recovery.

  What does that mean???

  When this happens out of warranty, HP not "intensify."  But we do not have them.  Read this for next time...

  Code Purple is an exclusive problem of HP, the simplest solution is to avoid. However, it is already too late for you as for me. Basically, it's an attempt to force you to pay to repair or upgrade your PC, or if you have not learned the first time, buy a new one. Here's the most concise answer I found, tried to translate it into plain English.

  ENGLISH SIMPLE EASY AND FAST, DIFFICULT FOR ALL SYSTEMS *.
  Windows 7 code purple or purple code Windows Vista

  With error code purple on the screen, press SHIFT + f10 (the shift key and press F10 (at the top of the keyboard) at the same time) to open a small screen called command prompt. (So you get a small black screen with white text that says something about your first Windows version and ways down a bit, you will see "C:\ > '.) It is all ready before you start typing.)
  Type the following line, just as you see here...

  Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  so it will look like this

  C:\>Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  Press ENTER.
  You will see the text of the file listed in a window using a simple text editor.
  Go to the beginning of the text. Press ENTER to set a space. This type...

  Goto cleanup

  Therefore, everything that comes after that, the first line looks like this...

  Goto cleanup

  Save the Notepad file and exit and restart your PC. You're good to go.

  Please repost like crazy.

• Cannot install Windows device recovery tool in Windows 7

  I can't install the NOKIA SOFTWARE recovery tool v 6.0.3 in my laptop that is running Windows 7, 64-bit.  I get error 0 x 80070002 system cannot find the specified file.  I have rights full administrator on my laptop, and I've already scanned my laptop for malware and viruses (clean).

  Hi Nagendra,

  Sorry for the inconvenience caused.

  You can refer to the link below and check the details of the error message.

  https://support.Microsoft.com/en-us/KB/201318

  Are you using Windows phone Device Recovery Tool?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  I suggest you to disable the third-party antivirus and check if it helps.

  WARNING:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  This error could be the side server. I suggest you try to install it after awhile.
   
  If the problem persists, you can try the mentioned method and check if it helps.
   

  You can try to perform the check disk error on your computer using the chkdsk.exe tool command line and check if that helps.

  CHKDSK (Chkdsk.exe) is a command-line tool that checks volumes for problems. The tool tries to repair any that it finds.
  Important: While performing hard disk drive error checking, if bad sectors can be found, the available data on this sector may be lost when tried to repair.

  1. click on start, run, type cmd and then click OK. A command prompt window opens.
  2. type chkdsk /f /r and press ENTER.
  You are prompted to schedule Chkdsk to run when the computer restarts.
  3. tap on it and then press ENTER.
  4 restart your computer. At startup, Windows will scan your disk for errors, and Windows will try to recover any files that are located on areas damaged the disk.

  For more information http://support.microsoft.com/kb/884070 (this item can also be used for windows 7)

  Hope this information is useful. Back to us for other queries. We are happy to help you!

• need drivers apple mobile device (recovery mode)

  can not restore ipod touch need help please

  Hello. You don't need drivers to use recovery mode. You must launch iTunes on the computer, and then connect the device using the USB cable.

• Is the possible to external device recovery?

  Hi @all,

  I have a Satellite M30x-134. My DVD player damaged a moment my question:

  How can I recover my system (Windows xp) with a damaged internal drive?

  Is it possible to leave an external via USB dvd drive or a USB?

  Can you tell me the parameters of this procedure?

  Many, many thanks and greetings,
  EGGE

  It is theoretically possible, but not so easy to do. USB option does not work. What you can try is to use the external CD/DVD drive, but it won't work so easy. The reason is that this external device will be recognized automatically.

  I didn't try, but I'm sure you must start your laptop with disk boot BACK, BACK to load a driver for the external device to access and as the last step of the installation of recovery.
  It's quite complicated.
  Best solution for you is to check eBay, buy the new optical disk drive, be happy with many of the workbook.

• Unable to get the BlackBerry Curve 8530 Simulator appears in Eclipse, run config-> device

  For all fans of Eclipse...

  I installed the BlackBerry Curve 8530 Simulator, which can be run inside BlackBerry JDE, but impossible to make it appear as one of the options under device to the Eclipse IDE. The simulators that appear in Eclipse in run configuration are 9000, 9550, 9700. I just like being in the Eclipse IDE.

  Thanks... any help would be appreciated.

  -Carl

  Yes!

  I understand the problem.

  Please read my last entry in the database of bugs:

  https://www.BlackBerry.com/jira/browse/JAVAAPI-904

  (1) download Eclipse Galileo example: eclipse-java-galileo-SR1 - Win32.zip
  (2) unzip it anywhere. example c:\
  (3) follow these instructions to use the update site: http://na.blackberry.com/eng/developers/javaappdev/javaupdate.jsp
  (4) install BlackBerry_Simulators_5.0.0.337_8530 - Verizon.exe (you may need)

  I also, want to test with the new Simulator that I noticed in the download area!

  BlackBerry_Simulators_5.0.0.508_8530 - Verizon.exe

  I hope this helps!

  -Carl

• BlackBerry smartphone data to the PC without old device recovery

  My new BB 9900 developed a fault.  I have saved on my laptop computer and brought it to the O2, where he was sent for repair.  It seems that my old camera is wrong me back, but replaced by a new one.  I bought a new 9900 BB until I couldn't do without a phone.  Can someone please tell me how do I get my information from my laptop, because I don't have the old device in order to use the function of switch-on device.  Is it possible to load the data on my present 9900 without the old appliance?  I'm desperate!

  You should be able to.restore the backup in Desktop Manager help - don't be a swap of the device.

• Recovery CD work not (Satellite A10)

  I have a Satellite A10S503, I bought 1 year ago now I want to format using the product recovery CD. However the procedure do not work.
  1. I put the CD in the drive.
  2. active on the computer by pressing F12.
  3 choose the CD logo.

  And then reopened Win XP.

  Second, I changed the boot device main to the Toshiba HW Setup CD and I started.

  This time, at the start, computer tried a CD but 'failure to support' message came on the screen. And Windows XP open as before...

  To sum up, I couldn't format my computer.

  I have two drives CD-ROM that comes in the box from Toshiba.
  1 Toshiba Recovery CD
  2. Tools & Utilities CD

  And none of them works as a format XP bootable disc.

  I just want to format my computer and restore factory settings. Manual Guide Toshiba says it's possible, but the procedure does not work!

  Please help me to restore my factory settings.

  Thank you.

  Hello

  On the Toshiba Recovery CD there is image that includes the operating system, all necessary drivers, Toshiba tools and some applications provided by Toshiba. Recovery CD is bootable and should be used only for the installation of the operating system.

  Tools & Utilities CD contained all the drivers, tools and utilities that you need for the use of portable computers. It is not bootable.

  If you want the updated CD-ROM boot CD device recovery CD. Press the power button / stop and keep the button C until CD-ROM starts to read the restore CD.
  Follow the instructions on the screen.

  Before doing this, you can also check in BIOS's power Mode option. If you can find it please choose boot option.

  Good bye

• Android Mini appears as an "unknown" device

  OT: Download data from my phone.

  I have a Mini Android, but a Microsoft Computer. When I plug my phone into the computer he calls it an "unknown" device I don't know how to fix it.

  Hello and welcome!

  You must set your phone works like a camera or media device. You can follow this here:

  http://www.device-recovery.com/how-to-connect-Android-devices-to-PC-with-USB-mass-storage-mode

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• CSACSE-1113-K9 initial configuration for ever

  Hi all

  I'll put up a new CSACSE-1113-k9 (acs 4.2 device).

  1st step is to perform the initial configuration by a connection serial (rs-232 port on the chassis of the device).

  I already did, but whenever I try to connect to the serial port, Setup runs allover again.

  Account admin, ip address, mask, etc., all that is there, but it keeps cycling through the same sequence of script, and I need to access the CLI to issue certain commands.

  Tips/advice appreciated please.

  Thanks in advance

  JD

  Hello

  It's because you keep giving Yes for the test running on the initial Setup. When you are asked to test the network connectivity you enter N for which. Hope that clarifies your query.

  This step is essentially running a ping command to ensure the connectivity of the ACS.

  g. at the prompt, enter host name or IP address:, type the IP address or the host name of the device connected to the ACS SE and then press ENTER.

  Result: If successful, the system displays the ping statistics. The system displays the command prompt: test connectivity network [Yes]:.

  h. if network connectivity is confirmed in the previous two steps, at the prompt, [Yes] network connectivity Test:, type n, or N, and then press ENTER.

  

  Tip the system continues to provide you with the opportunity to test the network connectivity until you answer No. This means that you can fix the network connections or retyping the IP address.

  Concerning

  Knockaert

• USB 3.0 hard drive "Unknown device" After sleeping

  I have a USB 3.0 external hard drive (1.5 to) that presents itself as 'Unknown device' recovery from my computer.  If I reboot, the drive works fine.  It occurs only after my computer goes to sleep.  I might just disable the sleep turn off hard disks, but I want to sleep/off hard drives can add some life to them and save me some powers.  I use Windows 7 Ultimate (64 bit).  Also, I have my power settings so that my hard drives turn off after 45 minutes and my computer sleeps after 1 hour.

  Any help would be appreciated.  Thank you.

  I think that editing the registry in the AdditionalCriticalWorkerThreads string may have worked.  I didn't have any problems today, but I'll keep testing to make sure.

  Thanks for the help.

• Need driver sound Windows XP for Satellite Pro A200

  Hi, I need audio drivers for windows XP.
  I searched on the web page to toshiba, but the audio drivers are not working. After installing this driver this message appear when I open a sound:
  "Driver of DirectSound incorrecto. Instale los correctos o select otro en the config device controllers. Code of error: 88780078 "

  Please, I need the REAL drivers for XP...

  Also, I would like to download the XP on Satellite Pro recovery DVDs, thank you.

  First of all it s important to know which model you have exactly-> PSAE1, PSAE4 or PSAE7

  After that I might give you some Tip If you have downloaded the wrong driver or drivers are actually available for your type of computer.

  With regard to the recovery DVDs: it s not available for download because Toshiba does not provide these images on some servers or elsewhere.
  If you want to recovery media, please contact an authorized service partner and ask them recovery CD/DVD.

  Welcome them

  P.S.: Would appreciate some feedback on your side, maybe we can solve your problem.

  See you soon

• access to locked out

  Hello

  I recently installed a cat2924XL. I was setting up Ganymede when I'm distracted and the session has expired - now I can't get to the switch. The only part I had set up was aaa-new model and secure line aaa authentication login. Unfortunately, I have no authentication of secure connection configured on the vty lines cty. Is it possible around this other than breaking into the device - it's understandable that I don't want to take the unit down!

  Thank you

  If you have written your config, password recovery is required. If this isn't the case, you need to restart.

  It's always a good idea to install a local account as a roundabout way method. This is useful if the AAA negotiation encounters an "error", then it will try the next method. Some examples of this are if you have the wrong key in the device mapped to the AAA server or network connectivity is down to the AAA server.

  Personally, I like to turn off aaa on the port of the console for this particular reason. Certainly, it can bypass a security policy, but if someone has physical access to the console, they can break anyway.

  Here's how:

  NO_AUTHEN AAA authentication login no

  Line con 0

  authentication of the connection NO_AUTHEN

  If you use EXEC authorization or order, they should be disabled on port console as well.

• New Firmware Update - where is the change log?

  I see that a firmware update was sent to my phone. However I can't find a change log. Where is it?

  Hello!

  HP and Microsoft has released an update (online) of the OTA for the X 3 elite on October 25, 2016. The update installs Windows Mobile 10 for the following versions:

  Firmware revision: 0002.0000.0014.0100

  Build of the OS: 10.0.14393.321

  Bootloader Version: 520101

  New features:

  Area	Description
  Display	High brightness Mode is activated when the brightness adjustment is suggested by default.
  Security	Reset functionality is enabled. However, the existing user must reflash phone with this software with Windows Device Recovery Tool (WDRT).

  The issues addressed (Items with * are fixed by OS updates):

  Area	Description
  Apps	App Instagram, have green lines during use is fixed.
  	Launch of view inconsistent HP on docking tools is fixed.
  Audio	Detection of the helmet is not reliable is fixed.
  Camera	Auto focus performance and stability in low light conditions are improved.
  	Model tapes preview screen is fixed.
  	Video recording after that tap put in pause/resume many times received message 'something went wrong' is fixed.
  Security	Blue BitLocker Recovery screen on reboot with active device encryption is fixed.
  User interface	Tap to wake up the wrong feature turn off screen is fixed.
  Hello Windows	IRIS is unblock, followed by sweeping to unlock quickly led to the prompt error is fixed.
  	Fingerprints and Iris being setup one after the other, one of them will not functional, is fixed. **

  Known issues:

  Area	Description
  Apps	Skype for business app can be run from external display of Continuum.
  Connectivity	Dock desktop LAN port of HP has no configuration of the user interface.
  User interface	Missing tiles with update settings. The user can go to the list of applications, press the settings icon and select PIN to start restoring the tile.
  	Tile 2 Messaging becomes white with update. Touch on the tile once it restores.
  Security	Too many failed unlock attempts, the device will be blocked for security reasons. User can unlock the unit to https://account.microsoft.com/devices.

  Thank you