CSD before logon with VPN policy without client check
I'm testing the CSD before political logon controls while I use the VPN without client. I found that if java is not detected then I will this information, "Weblaunch for Cisco Secure Desktop has failed. If you want to manually start the Cisco Secure Desktop, you can download a native Cisco Secure Desktop Launcher. »
But underneath, I also see "or log in using the link below (some resources may not be available):
Login»
This means that I can bypass the verification before opening of political of CSD session if JAVA is not installed.
Is this good? or I do not miss anything?
You can use Dynamic Access policies (RAP) to perform additional checks. These controls to use CSD and if CDD is not running (or bypass) the DfltAccessPolicy is applied. You can set it to terminate the connection and display a message to the user. Before the DfltAccessPolicy you must have a permissive policy where check you something that is always true (e.g. the all kinds of operating systems) and the value of the action to continue.
If you do not have only clientless connections additional tuning may be necessary.
Update:
A good docs on the verification of existence of CSD:
https://supportforums.Cisco.com/docs/doc-8283
Tags: Cisco Security
Similar Questions
-
Disable without client/browser based VPN.
Guy of HU,
I want to disable VPN access without client in our ASA.
I saw this configuration in ASA:
WebVPN
allow outside
allow inside
AnyConnect essentials
SVC disk0:/anyconnect-win-3.1.01065-k9.pkg 1 image
SVC disk0:/anyconnect-linux-2.4.0202-k9.pkg 2 image
Picture disk0:/anyconnect-macosx-i386-2.4.0202-k9.pkg 3 SVC
enable SVC
tunnel-group-list activateI disabled the Webvpn with the command "No webvpn. But it looks like that it deactivated the VPN access without customer and with the customer.
Can someone help me with this please?
FC
Hello
By default, you would not be able to access without VPN client anyconnect essential you've enabled in config.
So if you need to disable webvpn access you allow only ssl-client protocol under config group policy.
Discover this config:
ASA - SSLVPN (config) # group - polished
In-house strategy group SSLVPN_ASA ASA - SSLVPN (config) #.
Attributes of SSLVPN_ASA strategy group ASA-SSLVPN (config) #.
Split-tunnel-policy tunnelspecified ASA - SSLVPN (config - Group - Policy) #.
Value of split-tunnel-network-list ASA - SSLVPN (config - Group - Policy) # SPLIT_TUNNEL
ASA - SSLVPN(config-Group-Policy) # Protocol vpn tunnel?
orders/options mode group policy:
IKEv1 IKE version 1
IKEv2 IKE version 2
L2TP ipsec L2TP with IPSec for security
SSL-client SSL VPN Client
SSL-clientless clientless SSL VPN
ASA - SSLVPN(config-Group-Policy) # tunnel - vpn-client-ssl Protocol
But since you have anyconnect essentials enabled in config webvpn you would have no access to clientless VPN.
He only let you to access the services of the Anyconnect client.
Kind regards
Aditya
Please evaluate the useful messages and mark the correct answers.
-
Hi all
I would like to know if, in confuring a SSL VPN mode without client, servers, I need to access must be directly connected to the VPN gateway?
Thank you in advance.
Servers can be anywhere in the network, but routing should be in place to reach VPN gateway.
Thank you
Ajay
-
Client VPN 3.6.3.B - start before logon - connection fails immediately
It is the most extraordinary and I can't decide if the problem is with the VPN, Windows 2000 Dialer, the Toshiba Tecra 9100 or a combination of both.
The problem happens when 'Enable start before logon' is ticked on and I try to dial up the ISP before logging on to Windows. When you click the button to connect, the historical connection window immediately:
Initializing the connection...
Cannot establish a connection with your ISP.
The modem never seems to receive the command to dial a number.
Other specific comments:
1. If I'm already connected to standalone Windows on the laptop (i.e. not connected to a local network), the VPN dialer works perfectly and I am able to establish a tunnel (although I can't authenticate with a domain controller)
2. on this same machine with the same version of the VPN Client, I have not experience this problem when Windows XP has been installed. (I hate XP that is installed on the new machine. I downgraded to Windows 2000 SP2 After reformatting the hard drive.)
Everyone knows about this problem? Does anyone have suggestions for troubleshooting?
Hello
I you suggest trying to create a new entry for remote access for the access provider (using the dial-up connection to the Public Network option), and then try to use NFP, or on the other hand you can try creating a new vpn connection entry and then try that as well.
This feature works fine with 3.6.3 client versions.
Thank you
AFAQ
-
We can connect remote vpn ipsec before logon in windows?
can connect us to the vpn remote ipsec before logon in windows? is there an option in cisco vpn client?
Hello Krishna,
You can do this with the start function prior to logon.
The following link describes the same thing:
You can even activate as follows:
VPN client > options > Windows user properties > check the box "enable start before logon".
I hope this helps.
Kind regards
AnishaP.S.: Please mark this thread as answered if you feel that your query is resolved.
-
Can not type 'url-list' without client Anyconnect VPN setup
Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'url-list', I can't enter.
Here is example of Cisco:
WebVPN
allow outside
list of URLS ServerList "WSHAWLAP" cifs://10.2.2.2 1
list of URLS ServerList "FOCUS_SRV_1" https://10.2.2.3 2
list of URLS ServerList "FOCUS_SRV_2" http://10.2.2.4 3Here's my ASA:
VPNFW-70/PRI/Act(config-WebVPN) # url -?
set up the mode commands/options:
URL-block url-url-cache serverMy ASA has no choice of the list of URLs when you type '?
Can anyone give me some suggestions? Thank you.
http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...
Hello
In the 7.x code all customizations without client was included in the running configuration.
However, referring to this document from cisco:- http://goo.gl/XRkrcO, you can see that this command has been deprecated in 8.X ASA codes.The best way to configure the bookmarks will use the ASDM or create them on a server and then bring import them to ASA.
Why we can not create bookmarks CLI?
With the introduction of 8.x many more options have been added, allowing greater flexibility. These new options would make the running configuration passes, so they were moved into separate xml files. Indeed, it eliminated the ability to configure a list of bookmark via the CLI.
For more information on this discussion, please refer to this thread: -.
https://supportforums.Cisco.com/discussion/11010546/how-do-i-create-URL-bookmark-WebVPN-Portal-CLIKind regards
Dinesh MoudgilPS Please rate helpful messages.
-
VPN without client, RDP Audio
Hello.
I use the VPN client without client to connect to our ASA5510 to 8.3. I use remote desktop to connect to an internal machine. It works very well with the ActiveX and Java.
One thing I want, is to leave the room audio to the remote computer.
Is there a command line for this switch? As "geometry", "console" and so on.
Peter
Hi Peter,.
RDP Audio redirection exists but only for the ActiveX version of the plugin, not the Java one.
Here is how you should define your bookmark if you want to use this feature:rdp:///?audio=X
Where X can be:0: Redirect remote sounds to the client computer.
1: Play sounds at the remote computer.
2: Disable sound redirection; do not play sounds at the remote server.
Kind regards
Nicolas
-
AnyConnect and SSL - VPN without client
Are there problems in running Cisco AnyConnect and SSL - VPN without client side by side?
I am currently looking into adding features for an ASA AnyConnect who currently set up to operate without SSL - VPN client. The system without client is not removed. I don't know how to set it up, I wonder if someone has already set up this or if there is no problem with this Setup?
Hi Daniel
It's a little complicated if you want a granular authentication and authorization, but it works.
I'm running an ASA with IPSec, SSL Client and clientless SSL.
Each of these virtual private networks with user/one-time-password name and certificate based authentic.
The main challenge is to put in place its own structure of profile cards, connection profiles, group policies and dynamic access policies.
Feel free to ask questions...
Stephan
-
ASA Windows7 and startup-before-logon problems (SBL)
We try in vain to get Windows7 SBL working with configuration following (SBL works for XP);
ASA5520
ASA 8.0 (4)
ASDM 6.1 (5)
AnyConnect 2.4.1012
VPN Plus license (SSL VPN peers 100)
When you configure the group policy for Clent download optional Module we have option for vpngina and can not see module start before logon (EPP), in paragraph 2.4 of the AnyConnect Client documentation.
Is this a problem of license type or do we need an ASA/ASDM software update?
Thanks in advance for your help.
The following doc can be referenced on the rest of the SBL configuration:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809f0d75.shtml
-
-VPN - PROBLEM IOS CLIENT!
-Start ciscomoderator note - the following message has been changed to remove potentially sensitive information. Please refrain from publishing confidential information about the site to reduce the risk to the security of your network. -end of the note ciscomoderator-
Hello
I have IOS Cisco 2650XM running IPSEC. I configured for authentication local customer vpn. I create ipsec tunnel more Don t ping from router to my client vpn (windows 2 k with vpn client 4.0). If anyone can help me, my express recognition.
Better compliance
Joao Medeiros
SH RUN
Current configuration: 8092 bytes
!
! Last configuration change at 09:09:04 GMT Tuesday, March 2, 1993 by lordz
!
version 12.2
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
hostname router_vpn_fns
!
start the system flash c2600-ik9o3s - mz.122 - 11.T.bin
AAA new-model
!
!
AAA authentication login default local
AAA authorization network default local
AAA - the id of the joint session
!
clock timezone GMT - 3
voice-card 0
dspfarm
!
IP subnet zero
no ip source route
IP cef
!
!
no ip domain search
agm IP domain name - tele.com
name-server IP 192.168.10.1
!
no ip bootp Server
audit of IP notify Journal
Max-events of po verification IP 100
property intellectual ssh time 60
IP port ssh 2000 rotary 1
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 110
preshared authentication
lifetime 10000
!
crypto ISAKMP policy 130
preshared authentication
lifetime 10000
ISAKMP crypto key xxx address xxx.xxx.76.22
ISAKMP crypto key xxx address yyy.yyy.149.190
!
ISAKMP crypto client configuration group xlordz
key cisco123
DNS 192.168.10.1
area agm - tele.com
LDz-pool
ACL 108
!
86400 seconds, duration of life crypto ipsec security association
!
Crypto ipsec transform-set esp-3des esp-sha-hmac agmipsec_gyn
Crypto ipsec transform-set esp-3des esp-sha-hmac agmipsec_poa
Crypto ipsec transform-set esp-3des esp-sha-hmac ldz-series
!
Crypto-map dynamic ldz_dynmap 10
ldz - Set transform-set
!
!
by default the card crypto client ldz_map of authentication list
default value of card crypto ldz_map isakmp authorization list
client configuration address card crypto ldz_map answer
ldz_map 10 card crypto ipsec-isakmp dynamic ldz_dynmap
!
agmmap_gyn crypto-address on Serial0/0
agmmap_gyn 1 ipsec-isakmp crypto map
the value of xxx.xxx.76.22 peer
Set transform-set agmipsec_gyn
PFS group2 Set
match address 120
QoS before filing
agmmap_gyn 2 ipsec-isakmp crypto map
the value of yyy.yyy.149.190 peer
Set transform-set agmipsec_poa
PFS group2 Set
match address 130
!
!
!
call active voice carrier's ability
!
voice class codec 1
codec preference 1 60 g729r8 bytes
g711alaw preferably 2 codec
!
!
Fax fax-mail interface type
MTA receive maximum-recipients 0
!
controller E1 0/1
case mode
No.-CRC4 framing
termination 75 Ohm
time intervals DS0-Group 1-15, 17 0 type digital r2 r2-compelled ani
Digital-r2 r2-compelled ani type 1 time intervals DS0-group 18-31
0 cases-custom
country Brazil
counting
signal response Group-b 1
case-personal 1
country Brazil
counting
signal response Group-b 1
!
!
!
!
interface FastEthernet0/0
192.168.15.1 IP address 255.255.255.0 secondary
192.168.7.1 IP address 255.255.255.0 secondary
IP 192.168.10.10 255.255.255.0
NBAR IP protocol discovery
load-interval 30
automatic speed
full-duplex
priority-group 1
No cdp enable
!
interface Serial0/0
bandwidth of 512
IP 200.193.103.154 255.255.255.252
NBAR IP protocol discovery
frame relay IETF encapsulation
load-interval 30
priority-group 1
dlci 507 frame relay interface
frame-relay lmi-type ansi
ldz_map card crypto
!
interface FastEthernet0/1
no ip address
NBAR IP protocol discovery
load-interval 30
Shutdown
automatic duplex
automatic speed
No cdp enable
!
LDz-pool IP local pool 192.168.10.3 192.168.10.5
IP classless
IP route 0.0.0.0 0.0.0.0 200.193.103.153
IP route 192.168.20.0 255.255.255.0 xxx.xxx.76.22
IP route 192.168.25.0 255.255.255.0 xxx.xxx.76.22
IP route 192.168.30.0 255.255.255.0 yyy.yyy.149.190
IP route 192.168.35.0 255.255.255.0 yyy.yyy.149.190
IP route vvv.vvv.17.152 255.255.255.248 192.168.10.1
IP http server
enable IP pim Bennett
!
!
dns-servers extended IP access list
extended IP access to key exchange list
!
Journal of access list 1 permit 192.168.10.44
Journal of access list 1 permit 192.168.10.2
Journal of access list 1 permit 192.168.10.1
access-list 1 permit vvv.vvv.17.154 Journal
IP access-list 108 allow any 192.168.10.0 0.0.0.255 connect
access-list 108 permit ip any any newspaper
IP access-list 120 allow any 192.168.20.0 0.0.0.255 connect
IP access-list 120 allow any 192.168.25.0 0.0.0.255 connect
access-list allow 120 ip host xxx.xxx.76.22 any log
access-list 120 deny ip any any newspaper
IP access-list 130 allow any 192.168.30.0 0.0.0.255 connect
IP access-list 130 allow any 192.168.35.0 0.0.0.255 connect
access-list allow 130 ip host yyy.yyy.149.190 any log
access-list 130 deny ip any any newspaper
access-list 140 deny udp 192.168.20.0 0.0.0.255 any netbios-ns range
NetBIOS-ss log
access-list 140 deny udp 192.168.25.0 0.0.0.255 any netbios-ns range
NetBIOS-ss log
access-list 140 deny udp 192.168.30.0 0.0.0.255 any netbios-ns range
NetBIOS-ss log
access-list 140 deny udp 192.168.35.0 0.0.0.255 any netbios-ns range
NetBIOS-ss log
access-list 140 refuse tcp 192.168.20.0 0.0.0.255 any beach 137 139 connect
access-list 140 refuse tcp 192.168.25.0 0.0.0.255 any beach 137 139 connect
access-list 140 refuse tcp 192.168.30.0 0.0.0.255 any beach 137 139 connect
access-list 140 deny tcp 192.168.35.0 0.0.0.255 any beach 137 139 connect
access-list 140 refuse tcp 192.168.20.0 0.0.0.255 any eq connect 5900
access-list 140 refuse tcp 192.168.25.0 0.0.0.255 any eq connect 5900
access-list 140 refuse tcp 192.168.30.0 0.0.0.255 any eq connect 5900
access-list 140 deny tcp 192.168.35.0 0.0.0.255 any eq connect 5900
access-list 140 permit ip any any newspaper
Dialer-list 1 ip protocol allow
not run cdp
!
Server SNMP community xxxxxxxxxx
Enable SNMP-Server intercepts ATS
call the rsvp-sync
!
voice-port 0/1:0
!
voice-port 0/1:1
!
No mgcp timer receive-rtcp
!
profile MGCP default
!
Dial-peer cor custom
!
!
!
!
Line con 0
exec-timeout 2 0
Synchronous recording
length 50
line to 0
exec-timeout 0 10
No exec
line vty 0 4
access-class 1
transport input telnet ssh
!
Master of NTP
!
end
Hello
If you are not disturbing the production network much, just try to reload 2650.
This works sometimes!
Kind regards
Walked.
-
VPN connects without asking for a password!
Hello
I just moved my setup lab work VPN to my main router, everything works planned, except that when I try to connect with VPN, it connect directly WITHOUT asking for a Login or password, I don't get the context menu!
Two routers an equal (C1841) HW and SW (system image file is "flash: c1841-advsecurityk9 - mz.124 - 24.T1.bin")
Here below the full working script:
(I know I have to clean, I'll do it next week)
Best regards
Didier
ROUTER1841 #sh run
Building configuration...
Current configuration: 8440 bytes
!
! Last configuration change at 10:27:45 gmt + 1 Sunday 30 January, 2011 by admin
! NVRAM config update at 00:29:33 gmt + 1 Sunday 30 January, 2011 by admin
!
version 12.4
horodateurs service debug datetime localtime
Log service timestamps datetime msec
encryption password service
!
hostname ROUTER1841
!
boot-start-marker
boot-end-marker
!
forest-meter operation of syslog messages
logging buffered 4096 notifications
enable password 7 05080F1C2243
!
AAA new-model
!
AAA authentication login userauthen local
AAA authorization groupauthor LAN
!
AAA - the id of the joint session
clock time zone gmt + 1 1 schedule
clock daylight saving time gmt + 2 recurring last Sun Mar 02:00 last Sun Oct 03:00
dot11 syslog
no ip source route
!
No dhcp use connected vrf ip
DHCP excluded-address IP 192.168.10.1
DHCP excluded-address IP 192.168.20.1
DHCP excluded-address IP 192.168.30.1
DHCP excluded-address IP 192.168.100.1
IP dhcp excluded-address 192.168.1.250 192.168.1.254
!
IP dhcp pool vlan10
import all
network 192.168.10.0 255.255.255.0
default router 192.168.10.1
lease 5
!
IP dhcp pool vlan20
import all
network 192.168.20.0 255.255.255.0
router by default - 192.168.20.1
lease 5
!
IP dhcp pool vlan30
import all
network 192.168.30.0 255.255.255.0
default router 192.168.30.1
!
IP TEST dhcp pool
the host 192.168.100.20 255.255.255.0
0100.2241.353f.5e client identifier
!
internal IP dhcp pool
network 192.168.100.0 255.255.255.0
Server DNS 192.168.100.1
default router 192.168.100.1
!
IP dhcp pool vlan1
network 192.168.1.0 255.255.255.0
Server DNS 8.8.8.8
default router 192.168.1.1
lease 5
!
dhcp MAC IP pool
the host 192.168.10.50 255.255.255.0
0100.2312.1c0a.39 client identifier
!
IP PRINTER dhcp pool
the host 192.168.10.20 255.255.255.0
0100.242b.4d0c.5a client identifier
!
MLGW dhcp IP pool
the host 192.168.10.10 255.255.255.0
address material 0004.f301.58b3
!
pool of dhcp IP pc-vero
the host 192.168.10.68 255.255.255.0
0100.1d92.5982.24 client identifier
!
IP dhcp pool vlan245
import all
network 192.168.245.0 255.255.255.0
router by default - 192.168.245.1
!
dhcp VPN_ROUTER IP pool
0100.0f23.604d.a0 client identifier
!
dhcp QNAP_NAS IP pool
the host 192.168.10.100 255.255.255.0
0100.089b.ad17.8f client identifier
name of the client QNAP_NAS
!
IP cef
no ip bootp Server
IP domain name dri
host IP SW12 192.168.1.252
host IP SW24 192.168.1.251
IP host tftp 192.168.10.50
host IP of Router_A 192.168.10.5
host IP of Router_B 10.0.1.1
IP ddns update DynDNS method
HTTP
Add http://dri66: [email protected] / * *//nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=[email protected] / * //nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=
maximum interval 1 0 0 0
minimum interval 1 0 0 0
!
NTP 66.27.60.10 Server
!
Authenticated MultiLink bundle-name Panel
!
!
Flow-Sampler-map mysampler1
Random mode one - out of 100
!
Crypto pki trustpoint TP-self-signed-2996752687
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2996752687
revocation checking no
rsakeypair TP-self-signed-2996752687
!
!
TP-self-signed-2996752687 crypto pki certificate chain
certificate self-signed 01
30820246 308201AF A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 32393936 37353236 6174652D 3837301E 170 3130 31313330 31393036
34355A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 39393637 65642D
35323638 3730819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100E1D0 6D1EDC8A D7C6D4C4 FADC711E FB52B082 4F81BF1E 9B5BD3A0 DDB505E2
6E69B426 47168821 AA60E9ED C4B3F95B C0830935 F6B395BA EB6CFC82 E27B75EC
9 258765 4690634 628EBF91 CBF13884 F5DA31EF 44C3D330 C9FF0D27 E45DE343
5F5EE55B A4B53946 56429179 15687FFE 63A7C25C 259FA18E DB20F8C5 5F3065E1
02570203 010001 HAS 3 1 130101 FF040530 030101FF 30190603 0F060355 6E306C30
551 1104 12301082 0E524F55 54455231 3834312E 64726930 1 230418 1F060355
30168014 6144EDD8 070B697B 38FC3D5E A2501396 D885B4D5 551D0E04 0603 301D
16041461 44EDD807 0B697B38 FC3D5EA2 501396 85B4D530 D 8 0D06092A 864886F7
010104 05000381 810099FA B5F4D0B0 D51DA525 1AB96481 1D1732B3 CD080412 0D
2255E8DB 84823CF5 ED9C077C 1FADFF17 A9A1D4BA B69B39B0 47A9CBA7 4A97C1E5
6A1B6FBD 511BA8AD 3E716EC3 654980DA F16A3B47 CE7BC6A4 1902600E CB1373E2
863C 6352 9074B62A 15E74894 BEDEDC14 D85753AF AD2EF852 6A4B2588 9759CABD
42AD878C 58504629 BE48
quit smoking
!
!
VTP version 2
username Admin privilege 15 secret 5 $1$ gAFQ$ 2ecAHSYEU9g7b6WYuTY9G.
username cisco password 7 02050D 480809
Archives
The config log
hidekeys
!
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group 3000client
key cisco123
DNS 8.8.8.8
domain cisco.com
pool VPNpool
ACL 150
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
!
card crypto client clienmap of authentication list userauthen
!
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
IP port ssh 8096 Rotary 1
property intellectual ssh version 2
!
!
!
interface Loopback0
IP 192.66.66.66 255.255.255.0
!
interface FastEthernet0/0
DMZ description
IP ddns update hostname mlgw.dyndns.info
IP ddns update DynDNS
DHCP IP address
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
clientmap card crypto
!
interface FastEthernet0/0,241
Description VLAN 241
encapsulation dot1Q 241
DHCP IP address
IP access-group dri-acl-in in
NAT outside IP
IP virtual-reassembly
No cdp enable
!
interface FastEthernet0/0.245
encapsulation dot1Q 245
DHCP IP address
IP access-group dri-acl-in in
NAT outside IP
IP virtual-reassembly
No cdp enable
!
interface FastEthernet0/1
Description INTERNAL ETH - LAN$
IP 192.168.100.1 address 255.255.255.0
no ip proxy-arp
IP nat inside
IP virtual-reassembly
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet0/0/0
switchport access vlan 10
spanning tree portfast
!
interface FastEthernet0/0/1
switchport access vlan 245
spanning tree portfast
!
interface FastEthernet0/0/2
switchport access vlan 30
spanning tree portfast
!
interface FastEthernet0/0/3
switchport mode trunk
!
interface Vlan1
IP address 192.168.1.250 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface Vlan10
IP 192.168.10.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface Vlan20
address 192.168.20.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
Vlan30 interface
192.168.30.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface Vlan245
IP 192.168.245.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
IP pool local 172.16.0.1 VPNpool 172.16.0.200
IP forward-Protocol ND
no ip address of the http server
local IP http authentication
IP http secure server
!
IP flow-cache timeout idle 130
IP flow-cache timeout active 20
cache IP flow-aggregation prefix
cache timeout idle 400
active cache expiration time 25
!
!
IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800
overload of IP nat inside source list 170 interface FastEthernet0/0
IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900
overload of IP nat inside source list interface FastEthernet0/0.245 NAT1
IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095
!
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255
access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255
access-list 170 permit ip 192.168.10.0 0.0.0.255 any
access-list 180 deny ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255
access-list 180 permit ip 192.168.10.0 0.0.0.255 any
not run cdp
!
!
!
route NAT allowed 10 map
corresponds to the IP 180
!
!
!
control plan
!
Line con 0
Speed 115200
line to 0
line vty 0 4
access-class 5
privilege level 15
Rotary 1
transport input telnet ssh
line vty 5 15
access-class 5
Rotary 1
!
Scheduler allocate 20000 1000
end
Didier,
You can configure the router to accept the connection of customer VPN without XAUTH (extended authentication), so by this authenticating just VPN client itself, not the user.
But, depending on the configuration, you will be prompted for user/pass.
Are you saying the client connects very well and the tunnel is fully established without this prompt?
Federico.
-
XP hangs before logon for the user profile.
Propely at startup of Windows, but XP hangs before logon for the user profile.
The system does not start in all modes like without failure, command prompt mode, last know good Configuration. But it starts only in XP system recovery mode.
What happened after cloning of a XP C: hard drive Sata Drive Dell OptiLex 760 to another System DELL OptiLlex 760 . I've used Norton Ghost 15.
Hi ANM
· Have you created an image of the system using Norton ghost backup software?
When you create system images using backup software, it is supposed to ideally be used on the same computer, since you cloned it on another computer, it seems to me that the user profile is corrupted and failed to load.
If the problem is the DELL OptiLex 760 system then I suggest you to connect with Norton Ghost.
If not then you can follow the market from the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Problem with VPN connection via a wireless card broadband Verizon Cisco VPN air
I can't access any device on my network via RDP or applications via the host file - forwarded servers from my 64 bit Windows 7 laptop using wireless broadband Verizon and customer VPN Cisco 64 bit 5.0.7.290. I can connect easily via a LAN wired connection from home using the same laptop computer and client VPN and RDP.
The VPN client connects to the server VPN (easy VPN on Cisco 2821 router) on the broadband wireless connection (I can see it in the GPMC on the router) but it will pass no data. I can't ping anything in the field, or external IP address. When I try to ping the laptop, it drops off the VPN (completed peer connection).
The laptop is a Dell M4500 running Windows 7 Ultimate 64 bit OS. The VPN client is stated, rev 5.0.7.290. The card internal wireless broadband is a QualCom 5620 (EV-DO-HSPA) system (Gobi 2).
What must I do to get this configuration to perform and log as does the wired connection?
Tim Carlisle
The Systems Manager
Post edited by: Timothy Carlisle recently I discovered that the Cisco 64 bit client VPN running on my Dell Precision M6500 (Windows 7 64-bit OS) was able to connect properly using the WiFi on my iPhone 4S (Verizon Wireless). It will also connect when attached to the laptop via a USB cable. Once I discovered this, I was then able to do the same thing on the laptop that spawned this discussion, by attachment for Blackberry "BOLD" from the boss after the download and installation of a new Verizon Wireless Access Manager utility that has allowed to select the device (Blackberry) for installation. I think that enabled us to bypass the wireless cards Gobi2 on two laptops and the factory installed Dell Connection Manager software which was not compatible with the Cisco VPN 64 bit client software. As much as I fear here, this new method (hotspot of Smartphone and attachment) is the way to go for us and has solved all the problems of connectivity distance for us. Thank you to all who have contributed to this discussion. Tim Carlisle
The Solution to the debate has been captured in this Document: -.
https://supportforums.Cisco.com/docs/doc-18721
We fought with the same question for quite awhile before finding that there seems to be a default setting in the Verizon Access Manager software that plays well with the Cisco Client.
In VZAccess Manager, select Options | Preferences. Connectivity options, the default setting for "NDIS Mode - connect manually" was chosen. Change this option to "Modem Mode - connect manually" seems to have completely addressed the issue. We can now connect to the WWAN, establish a Cisco VPN session and have connectivity.
-
I have two problems with IPSEC VPN, using the cisco client, and a third, which I think could answer here if this isn't strictly associated with VPN.
1. cannot access the internet, while VPN is in place. This can be a problem of client as I * think * I've split tunneling to install correctly.
2. cannot access other networks except the network associated with the inside interface natively.
3. I can not ping to the internet from inside, be it on the VPN or not.
I tend to use the SMDA; Please, if possible, keep the answer to this kindof of entry.
Here is the config:
Output of the command: "sh run".
: Saved
:
ASA Version 8.4 (1)
!
hostname BVGW
domain blueVector.com
activate qWxO.XjLGf3hYkQ1 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 10
IP 5.29.79.10 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
IP 172.17.1.2 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 172.19.1.1 255.255.255.0
management only
!
passive FTP mode
DNS server-group DefaultDNS
domain blueVector.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the subject of WiFi network
172.17.100.0 subnet 255.255.255.0
WiFi description
the object to the Interior-net network
172.17.1.0 subnet 255.255.255.0
network of the NOSPAM object
Home 172.17.1.60
network of the BH2 object
Home 172.17.1.60
the EX2 object network
Home 172.17.1.61
Description internal Exchange / SMTP outgoing
the Mail2 object network
Home 5.29.79.11
Description Ext EX2
network of the NETWORK_OBJ_172.17.1.240_28 object
subnet 172.17.1.240 255.255.255.240
network of the NETWORK_OBJ_172.17.200.0_24 object
172.17.200.0 subnet 255.255.255.0
DM_INLINE_TCP_1 tcp service object-group
port-object eq www
EQ object of the https port
the DM_INLINE_NETWORK_1 object-group network
network-object BH2
network-object NOSPAM
Outside_access_in list extended access permit tcp any eq smtp DM_INLINE_NETWORK_1 object-group
Outside_access_in list extended access permit tcp any object object-group DM_INLINE_TCP_1 BH2
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
mask pool local 172.17.1.240 - 172.17.1.250 VPN IP 255.255.255.0
mask pool local 172.17.200.100 - 172.17.200.200 VPN2 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source EX2 Mail2
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.1.240_28 of NETWORK_OBJ_172.17.1.240_28 static destination
NAT (inside, outside) static source all all NETWORK_OBJ_172.17.200.0_24 of NETWORK_OBJ_172.17.200.0_24 static destination
NAT (inside, outside) static source to the Interior-NET Interior-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
!
the object to the Interior-net network
NAT (inside, outside) dynamic interface
network of the NOSPAM object
NAT (inside, outside) static 5.29.79.12
Access-group Outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 5.29.79.9 1
Route inside 10.2.0.0 255.255.255.0 172.17.1.1 1
Route inside 10.3.0.0 255.255.255.128 172.17.1.1 1
Route inside 10.10.10.0 255.255.255.0 172.17.1.1 1
Route inside 172.17.100.0 255.255.255.0 172.17.1.3 1
Route inside 172.18.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.1.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.11.0 255.255.255.0 172.17.1.1 1
Route inside 192.168.30.0 255.255.255.0 172.17.1.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server blueVec protocol ldap
blueVec AAA-server (inside) host 172.17.1.41
LDAP-base-dn DC = adrs1, DC = net
LDAP-group-base-dn DC = EIM, DC = net
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = Hanna\, Roger, OU = human, or = WPLAdministrator, DC = adrs1, DC = net
microsoft server type
Enable http server
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 inside
http 24.32.208.223 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
authentication crack
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 172.17.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 172.17.1.100 - 172.17.1.200 inside
dhcpd 4.2.2.2 dns 8.8.8.8 interface inside
dhcpd lease interface 100000 inside
dhcpd adrs1.net area inside interface
!
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
internal blueV group policy
attributes of the strategy of group blueV
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
value by default-field ADRS1.NET
internal blueV_1 group policy
attributes of the strategy of group blueV_1
value of server WINS 172.17.1.41
value of 172.17.1.41 DNS server 172.17.1.42
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
adrs1.NET value by default-field
username gwhitten encrypted password privilege 0 8fLfC1TTV35zytjA
username gwhitten attributes
VPN-group-policy blueV
rparker encrypted FnbvAdOZxk4r40E5 privilege 15 password username
attributes of username rparker
VPN-group-policy blueV
username mhale encrypted password privilege 0 2reWKpsLC5em3o1P
username mhale attributes
VPN-group-policy blueV
VpnUser2 SlHbkDWqPQLgylxJ encrypted privilege 0 username password
username VpnUser2 attributes
VPN-group-policy blueV
Vpnuser3 R6zHxBM9chjqBPHl encrypted privilege 0 username password
username Vpnuser3 attributes
VPN-group-policy blueV
username VpnUser1 encrypted password privilege 0 mLHXwxsjJEIziFgb
username VpnUser1 attributes
VPN-group-policy blueV
username dcoletto encrypted password privilege 0 g53yRiEqpcYkSyYS
username dcoletto attributes
VPN-group-policy blueV
username, password jmcleod aSV6RHsq7Wn/YJ7X encrypted privilege 0
username jmcleod attributes
VPN-group-policy blueV
rhanna encrypted Pd3E3vqnGmV84Ds2 privilege 15 password username
rhanna attributes username
VPN-group-policy blueV
username rheimann encrypted password privilege 0 tHH5ZYDXJ0qKyxnk
username rheimann attributes
VPN-group-policy blueV
username jwoosley encrypted password privilege 0 yBOc8ubzzbeBXmuo
username jwoosley attributes
VPN-group-policy blueV
2DBQVSUbfTBuxC8u encrypted password privilege 0 kdavis username
kdavis username attributes
VPN-group-policy blueV
username mbell encrypted password privilege 0 adskOOsnVPnw6eJD
username mbell attributes
VPN-group-policy blueV
bmiller dpqK9cKk50J7TuPN encrypted password privilege 0 username
bmiller username attributes
VPN-group-policy blueV
type tunnel-group blueV remote access
tunnel-group blueV General-attributes
address VPN2 pool
authentication-server-group blueVec
Group Policy - by default-blueV_1
blueV group of tunnel ipsec-attributes
IKEv1 pre-shablue-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
HPM topN enable
Cryptochecksum:2491a825fb8a81439a6c80288f33818e
: end
Any help is appreciated!
-Roger
Hey,.
Unfortunately, I do not use ASDM myself but will always mention things that could be done.
You do not split tunneling. All traffic either tunnel to the ASA, while VPN is active
You have the following line under the "group policy"
Split-tunnel-policy tunnelspecified
You will also need this line
Split-tunnel-network-list value
Defines the destination for the VPN Client networks. If you go in on the side of the ASDM group policy settings, you should see that no ACL is selected. You don't really seem to have an ACL in the configuration above, for the split tunneling?
To activate access Internet via the VPN Client now in the current configuration, I would say the following configuration of NAT
VPN-CLIENT-PAT-SOURCE network object-group
object-network 172.17.200.0 255.255.255.0
NAT (outside, outdoor) automatic interface after dynamic source VPN-CLIENT-PAT-SOURCE
In regards to the traffic does not for other networks, I'm not really sure. I guess they aren't hitting the rule NAT that are configured. I think they should, but I guess they aren't because its does not work
I could myself try the following configuration of NAT
object-group, network LAN-NETWORKS
object-network 10.2.0.0 255.255.255.0
object-network 10.3.0.0 255.255.255.128
object-network 10.10.10.0 255.255.255.0
object-network 172.17.100.0 255.255.255.0
object-network 172.18.1.0 255.255.255.0
object-network 192.168.1.0 255.255.255.0
object-network 192.168.11.0 255.255.255.0
object-network 192.168.30.0 255.255.255.0
object-group, network VPN-POOL
object-network 172.17.200.0 255.255.255.0
NAT (inside, outside) static static source of destination LAN-LAN-NETWORK VPN-VPN-POOL
Add ICMP ICMP Inspection
Policy-map global_policy
class inspection_default
inspect the icmp
or alternatively
fixup protocol icmp
This will allow automatically response to ICMP echo messages pass through the firewall. I assume that they are is blocked by the firewall now since you did not previously enable ICMP Inspection.
-Jouni
-
URL for access without client on SAA
Hello
I have an ASA with anyconnect configured profiles.
In one of these profiles, I want to activate VPN without client.
When I go to https://[asa address] get the instalation Anyconnect page.
How to make in the portal for client access?
Based on the above information, you can't clientless SSL VPN that you have active AnyConnect Essentials.
I saw that you have a license 2 (AnyConnect Essentials and AnyConnect Premium (10)), however, you can only activate one or the other, not both at the same time.
based on your webvpn configuration:
WebVPN
allow outside
AnyConnect essentials
You anyconnect essentials enabled, so you cannot have the premium activated anyconnect.
If you want to test the premium for clientless ssl vpn license, you will need to temporarily disable the anyconnect essentials.
to disable:
WebVPN
No anyconnect essentials
Hope that clears up the confusion.
Maybe you are looking for
-
Switchable graphics on Satellite L650
Hi there everyone! I would like to really know if Toshiba plans (I hope!) to publish an update of the Bios for the Satellite L650, enabling the switch between the graphics card discrete and that soon included in the matrix of the CPU (i5 series). The
-
Video on powerpoint (M40X SP)
I recently bought a Toshiba Satellite Pro M40X with Windows XP Professional. I have problem with the insertion of the video clip and watch a video clip on presentations power point.I tried 3 different Microsoft office xp and all versions have the sam
-
Satellite C870D - blue screen / reboot randomly
Hi all I recently bought a satellite c870d (uk) and the last week or so from time to time, usually when browsing the internet or do I change the window I look (for example flicking of internet explorer on the desktop) the computer to crash and bring
-
How to convert a dull file to .csv?
I have a dull file how to convert .csv file
-
Cannot run windows update as a revoked certificate
Hello I encountered a problem during live performance update for windows xp with ie7. the error is revoked certificate. All sulotions. Thanks & best regards, Sky