CTS 3000 on the internet using the VCSC e VCSEX

Similar Questions

• Can we replace the primary codec CTS 3000 with CTS 1000 codec

  Hi all

  Please correct me if I'm wrong.

  Physically CTS 1000 codec and CTS 3000 Primay Codec is the same air, I would like to know what is the difference between the two codecs.

  Suppose if I replace the main codec CTS 3000 with codec CTS 1000 it'll work?

  The difference is only between the firmware... ??

  If I try to download the firmware CTS 3000 in CTS 1000 codec does?

  Also add codec CTS 1000 in CUCM as Codec CTS 3000?

  Kind regards

  Nikhil Jayan

  Nikhil,

  Are the only thing you need to know about 2 codecs GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 microphones connect through the audion expansion area. You can see the difference on the codecs on the Gen 2, you can see 1 connection for the Center microphone and a connector square for the cable to the AEB.

  Other codecs are exactly the same. Endpoint gets its configuration file in Communications Manager. So once go you MAC address and restart the endpoint it will go the new configuration file. If you use a CTS Manager, you will need to go into the Application user in the CUCM and move the MAC address of available for controlled devices. You will then need to make a discovery of the room in the CTS - Man.

  The firware for both codecs are the same.

  I hope this helps out.

  JD King

• Need help to connect my ibook G3 to the Internet using Airport

  Hello
  I recently bought an Ibook G3 and unable to connect to the internet using Airport. I can find my internet provider and it allows me to enter the password for it, but after I have get the same message:
  "An error has occurred all trying to join the selected airport network. -3151.
  the password is correct, so I don't know why its not connecting.
  I checked the map, and everything seems OK.

  the Ibook is a Mac OS 9.2

  version Mac OSZ1 - 9.2.2

  Help, please! -J' I feel like IM going crazy trying to get it to work

  .

  Older hardware uses a different protocol and the later models of wi - fi security, so

  It may be that the unit is able to see the signal available but not able to use it or connect.

  In order to set up an AirPort Base Station wireless vintage separate from any modern

  wireless local area network is a way to use a less secure configuration wireless computer older

  and without compromising the latest systems which would share a reduced security wireless

  If you want to reduce the overall security of the system (using the old protocol WAP,

  WEP, etc.; drafters WPA2 +) and base stations can be more difficult if they

  also have more than one type of signal. Older computers use less bandwidth.

  At this point, I cannot possibly be a great help; short of reading thanks to my favorites

  old pages (and check if the pages still work online) reference to use the installation program.

  My setup wireless WPA2 but earlier use AirPort Express base; and also have older

  base station AirPort Extreme 54 k White orb on-site; but not currently enabled.

  To have an additional wireless hardware for use with vintage computers.

  Good luck in this case!

• Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

  Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

  See this support article - difficulty of problems connecting to websites after Firefox update

• Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

  Hi all

  Mine is an edition of Satellite L20.
  I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

  Since there is no bluetooth built into my laptop.
  So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

  Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

  I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
  1) send to microsoft
  Including 2) send.

  What can we do to fix this problem?

  No idea...?

  See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

• When I am browsing the internet using Safari and I'm looking for something like a plumber he gives met with responses from an area not my own.  How can I change this?

  When I'm surfing the internet using Safari looking for a product (like a plumber) all my suggestions come from the vicinity of Tyler, Texas.  I live much closer to Dallas.  How can I change that.  Thank you!

  You have location services? Are you allowing access from Safari to your location? You must check in the settings > privacy > Location Services > Safari Web sites. If she knows exactly where you are, then you can get these errors.

  I'm sorry, I just realized that you were referring to the Mac computer. My answer was for an iPhone. I can't help you with the Mac.

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. This is probably caused by the settings of firewall on this computer.

  I have a laptop Toshiba Satellite M105-S3041 with Windows XP Home Edition.  I received the error message listed above indicating that Windows cannot connect Internet using HTTP, HTTPS, or FTP.  When I open the wireless network connection status, I see packets sent and I also see that I get both packets.

  The opening to the top of Internet Explorer, I received the error message listed above.  When I go to the properties of my wireless adapter and examine the properties of the TCP/IP parameters, I see that I have "obtain an IP address automatically" and "Obtain DNS server address automatically" checked.  On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button.  Here, I see that the ports TCP, UDP and IP PROTOCOL.  I have a check the box 'enable TCP/IP filtering '.

  Please help me because I am still unable to connect to the internet.

  [snip]... On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button.  Here, I see that the ports TCP, UDP and IP PROTOCOL.  I have a check the box 'enable TCP/IP filtering '.

  In general, you don't want to have a check in the box "enable TCP/IP filtering.  Try to uncheck this box and see if it helps.

  If this does not help, two programs freeware difficulty sometimes of the problems of this kind...  Try to run LSPFix and/or WinSockXPFix.  Alternatively, you can try to reset your IP stack...

  "How to reset the Protocol Internet (TCP/IP)"
    <>http://support.Microsoft.com/kb/299357 >

  HTH,
  JW

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot check the Internet using my WRT54G2 V1 router.

  I have Blue Ridge cable Internet.

  I can connect to the internet perfectly by directly connecting the cord to this laptop that I am.

  I ran the CD for my WRT54G2 V1 router, and at the end of the installation it says my router is configured, but he said that it was not connected to the internet.

  I tried several times to fix this in troubleshooting, but none of them worked.

  I DID however just simply disconnect and reconnect the router after about 10 attempts and I've been on the internet for about 20 seconds. (I looked for something on google and found research.) But internet is turned off and it just says "Local".

  I want to connect to the internet using this router and thus be able to connect the members of my family with their laptops through this router.

  Thank you.

  Configure your router for Internet connection

  CLICK HERE for instructions

  To configure a router Linksys with cable Internet Service

  Make sure you follow the mac cloning procedure because it is the key

• connection to the internet using time capsule

  I have problems connecting to the internet using time capsule. It detects my wireless network but will not connect to internet. I run ipconfig/all and it comes up with media disconnected. If I put any security on my wireless network, it finds the network and go on the internet with no problems.

  Thanks for the help in advance

  Hello Pudgex76,

  I suggest looking on the forums of Apple for more information if necessary:
  http://www.Apple.com/support/TimeMachine/

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• After the HP update cannot connect to the Internet using my ISP wireless

  I have a HP Pavillion15 Notebook PC, Prod #: E7C83AV using Windows 8. Hp yesterday made an update, and subsequently, my computer does not connect to the Internet, using the same network wireless ISP.  Only way I can get Internet is to use the DSL unit to the computer USB cord.  I had a "Configuration for Invalid IP (106)"

  My ISP is still in my system with the same password, and I can't find any reason why it does not connect.  I have all the correct lights on my computer & the DSL unit.  I have not contacted my ISP, do not know what to say "After HP did an update, your service will not work?"

  Tonight I tried to get help from HP, big whoopie, even when I'm in warranty for 9 months, I was transferred to HP/SmartFriends, who told me that I had to pay for the assistance.  It won't happen!

  I don't know what to do now, I'm not very computer savvy and if HP won't help, do not know where to turn now.

  I'm fighting mad now!

  Someone please help.

  Have you tried to restore to previous work image?

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul