Customization of Logitech Marble Mouse button does not work

Similar Questions

• Satellite P750-136 - left mouse button does not work

  I don't understand what the problem is. My left mouse button does not work. If I put a little pressure on the Panel located under the button space then the left button of the mouse works.

  What should I do? It feels like a hardware problem, since I bought the laptop in November my laptop is still covered by the warranty.

  What you can do is to check the touchpad settings and make sure that everything is OK.
  I'm don't know if you noticed this since day 1, but if you think it is hardware problem I recommend you contact the nearest Toshiba service provider as soon as possible. Warranty will cover all repair costs.

• Re: Left mouse button does not work on Satellite L

  Hello

  I bought this computer notebook June 2010 and I never had no problem recently while watching movies has suddenly stop and happens quite often... and recently, I noticed that my left mouse button does not work correctly

  all useful suggestions please

  Thanks in advance
  Pramod

  Hi pramod_1,

  Have you tested an external mouse if the problem is maybe a few related software?

• Microsoft Sidewinder X 8 inch top of page mouse button does not work?

  I bought a Microsoft Sidewinder X 8 mouse and my upper thumb button will not work. Is it a hardware problem or a software problem? I have reinstalled the software.

  Hi Crimson7789,

  1. this happens when you try it on any game in particular?

  This seems to be a hardware problem. You can see the following link for the hardware support:

  http://www.Microsoft.com/hardware/support/default.mspx

  Hope this information is useful.

• lock the mouse button does not work

  It worked fine until a few weeks ago.  Now, I need to left-click while using the touch of the finger. I'm going to: mouse properties, buttons, lock, turn on click-lock and ok.  It does not help.  Thank you.

  Hello

  1 did you change on your computer?

  2. What is the brand and model of the computer?

  3. I suggest you perform the clean boot and check.

  Method 1:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to update mouse drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

• "the scroll of the mouse button does not work.

  I'm sorry. I don't know what to tell you more. I'm out of ideas.

  This is a pretty old post so I don't know if you'll see even this or not, but I thought I would just in case others have had this problem. I don't have a rock solid solution, but of course, I had to deal with this issue over the years several times. Usually with the mouse PS/2. I also had very difficult to find useful to question answers. It seems that there are many people who simply do not use the middle button as a shortcut for double click. I hate not having this double click the middle button.

  Finally, what works for me (years before), it's that I found a Logitech software that everything worked well with my PS/2 mouse 3 button. I think it was like Version 9.03, and no less.

  Now, I'm having the same problem again with the USB mouse... drivers or lack of pilots. When you have the problem, if you look in your Dashboard under the software of your mouse, you will likely see that there is no option of three buttons available. There the scroll wheel and click lines how much you want to scroll to each tread of the wheel (or if you want to lock the scrollbar) but no third option button and that's the problem. You need to find a driver that has this option and you can get it to work with the mouse that you ever then your problem is solved. This is a Windows problem... nothing in the bios either.

  I'm sure that there is someone out there who has a better tham solution = n me but at least if someone knows this problem... you are not alone, and now you know... it's the fault of Windows!

• my left mouse button does not

  HID SJ920MJ03802 REV A2 5 Windows 7 compatible mouse

  First of all welcome on the forums of axe!

  There are many things wrong with your mouse to the left button does not work. I suggest possibly making sure that there is nothing of clicking (e.g. dirt).

  And if you have a guarantee that I would come back, if not buy a replacement.

  Mike

• The Microsoft Wireless mouse right button does not work

  The right button of the mouse on my Microsoft Wireless Mobile Mouse 4000 does not - at first I thought that it was a hardware problem, but when I used the mouse properties/control panel to change the buttons on the mouse, the right button worked and the left mouse button does not, which leads me to believe that it is related to the software/driver.
  I have the latest version of the driver/Intellipoint software.  I am running Win 7 32 bit on a Lenovo ThinkPad T410.
  Change the port USB did not help; the problem persists, no matter which USB port I use for the receiver.
  Reinstall the software Intellipoint also did not help.
  It is a recent issue; I had the mouse for several months and it has worked well upward until a few days ago.
  Googling the problem that leads me to believe that it is a common problem, although most people seem to think it's a hardware problem.

  Hello

   
  Run the Fixit described in the article:
  Troubleshoot a wireless mouse that does not correctly
  
  http://support.Microsoft.com/kb/321122
   

  I also suggest you to remove the batteries in the mouse and keep it idle for 10-20 minutes. Insert the batteries and check it out.

   
  See also:
   
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   
  I hope this helps.

• "Back" button does not work with the latest version of any help?

  Hi, I use the latest version. When I go through the pages, I can not be able to return to previous pages. The back button does not work. When I click the back button, the same page, it's not coming back... Any help would be much appreciated!

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  You can click right back or front button to open the history list.
  
  You can hold down the left button of the mouse either back or next to the history tab list opens.
  
  The current active entry has a bullet in front of it.
  
  
  
  If you place an entry in the historic session with the mouse tab, so you see an arrow to the left pointing (rear) left or right (forward) to show the direction.
  
  You can left click on an item to open it in the tab active or middle-click or Ctrl, click on an entry in this list to open that link in a new tab, just as you can with the other links.

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• Re: Satellite L655 - the Touchpad on/off button does not work

  This morning, I noticed that the power button of the touchpad of my Satellite does not, although the Fn + F9 key combination works by enabling and disabling my touchpad.

  It was working well until what I slept last night when I woke up, my laptop has rebooted due to updates of Windows during the night. I don't read anything since I have been using a wireless mouse. Then reach work and check if I can activate my touchpad (Windows has loaded and connected), the display screen that shows if the touchpad is active or not does not appear and my touchpad, power button does not work.

  Any help is greatly appreciated.

  Thank you.

  Is this problem only you?
  I mean it's not so important, and I would not reinstall or change anything because of this.
  Until you can use the FN + F9 key combination I put t think it's a serious problem.

  What do you think of this?

• I need a driver/files mouhid.sys, my mouse support does not work. Please thank you!

  I need a driver/files mouhid.sys, my mouse support does not work.  Please thank you!

  Hmm, a strange thing to have disappeared.  Do you have a virus or checked for malware scanner?

  The mouhid.sys file is supposed to be in % systemroot%\system32\drivers.  You pouvez find a copy of it in % systemroot%\dllcache.  If it's not in... \drivers and is in... \dllcache, recopy the... \drivers.  (You may need to do this in Mode safe.)

  Except for the above bit of luck, there are several ways to recover.

  1. use msconfig:

  Get your installation CD or locate a copy online
  Since an administrator account, run msconfig ( -R, msconfig)
  When "msconfig" opens, select the "Général" tab and click on the button "expand file...". »
  (This will open the window to "Develop a Source of Installation file")

  Enter 'mouhid.sys' in "file to restore:
  Enter the path to the DRIVER. CAB file in the \i386 on your installation media directory.
  (or browse to...)
  Enter "c:\windows\system32\drivers" in the "save in:" entry.
  Click "expand".
  'mouhid.sys' is now where never told you develop to...

  2 use the utility auditor of system files (SFC) to check the missing files and restore them if necessary.
  You will again need your installation media and, if you have installed the Service Packs, the CD-ROM for
  the latest Service Pack, you have installed.

  From an administrator account, type: -R, sfc/scannow

  SFC calls for, first of all, your installation media, and then later the service pack CD-ROM.  If SFC wants to replace the files, leave.  If the SFC rejects your Service Pack CD-ROM, read the KB900910 Microsoft Knowledge base article.  Note that this article applies to SP2, but is also applicable to the SP3.  Just use your common sense and use SP3 where the article refers to SP2.

  If you don't have a CD-ROM Service Pack 3, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  Be sure to Select the appropriate language if you download ISO.  Note, I recommend that you install Service Pack 3 on a CD-ROM, rather than through Windows Update so that youpouvez use SFC with success!

  Please, vote if it is useful!  Please, click on Mark as answer if that answers your question.

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.