DAC performance fails at the fist stage

Hello

While running full load CAD iam getting the following error, the first step only it fails

05-02-2013 22:51:21.335 acquisition of resources

05-02-2013 acquired 22:51:21.336 resources

05-02-2013 22:51:21.337 INFORMATICA TASK: SILOS: SIL_InsertRowInRunTable:1: (Source: COMPLETE target: FULL) began.

FAULT INFO: Error executing: INFORMATICA TASK: SILOS: SIL_InsertRowInRunTable:1: (Source: COMPLETE target: FULL)
Message:
Fatal error
Application to start the workflow: 'SIL_InsertRowInRunTable with the name of the instance SIL_InsertRowInRunTable' terminated with error code 17
Error message: the settings file does not exist.
Opportunity to order: pmcmd startworkflow - sv is-u Administrator Pei * f - SILOS - paramfile Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SILOS Domain_123 d. SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
Workflow message:

=====================================
STD OUTPUT
=====================================

Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], LINUX 32-bit
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.

Called to Tue Feb 05 22:51:26 2013

Connected to the Service of integration: [is].
From [SIL_InsertRowInRunTable] workflow
ERROR: Workflow [SILOS: SIL_InsertRowInRunTable [version 1]]: parameter [Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SILOS file. SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt] not found. See the journal of Service integration for more information.
Disconnection of Service integration

Completed at Tue Feb 05 22:51:27 2013

=====================================
ERROR OUTPUT
=====================================

EXCEPTION CLASS: com.siebel.analytics.etl.etltask.IrrecoverableException

com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)

(Number of attempts: 1).

Make sure you have these files at the location \bifoundation\dac\Informatica\parameters

parameterfileDW.txt
parameterfileOLTP.txt

You can get these files from BIApps files-> dwrep

Also DAC-> Setup-> system properties of the DAC-> InformaticaParameterFileLocation by default

Check if help and appreciate also if you update your other posts by scoring when help or with your solution.

Published by: Srini VIEREN on February 6, 2013 12:01 AM

Tags: Business Intelligence

Similar Questions

DAC: task failed during the ETL for financial applications

I'm looking for my first ETL on OLIVIER 7.9.6.4
I use Oracle EBS 12.1.1 as source system.
the ETL full 314 tasks successfully, but it fails at the task named:
'SDE_ORA_GL_AR_REV_LinkageInformation_Extract '.
DAC error log:
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called Wed Sep 18 09:46:41 2013
Connected to the Service of integration: [infor_int].
File: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]
Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]
Success of the source lines: [0]
Source has no lines: [0]
Target lines of success: [0]
Target lines failed: [0]
Number of errors in transformation: [0]
First error code [4035]
First error message: [[error SQL RR_4035
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATI]
Task run status: [failure]
Integration service: [infor_int]
The integration of Service process: [infor_int]
Grid integration Service: [infor_int]
----------------------------
Name of node [node01_AMAZON-9C628AAE]
Fragment of preparation
Partition: #1 [Partition]
Instance of transformation: [SQ_XLA_AE_LINES]
Transformation: [SQ_XLA_AE_LINES]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last [16004] error code, message [ERROR: prepare failed.: []]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_CO]
Departure time: [Sat Oct 18 09:46:13 2013]
End time: [Sat Oct 18 09:46:13 2013]
Partition: #1 [Partition]
Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]
Transformation: [W_GL_LINKAGE_INFORMATION_GS]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last error code [0], message [no errors].
Departure time: [Sat Oct 18 09:46:14 2013]
End time: [Sat Oct 18 09:46:14 2013]
Disconnection of Service integration
Completed at Wed Sep 18 09:46:41 2013
-----------------------------------------------------------------------------------------------------
Informatica session log files:
DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].
DIRECTOR > VAR_27028 use override the value [ORA_R1211] for the session parameter: [$DBConnection_OLTP].
DIRECTOR > VAR_27028 use override the value [.] SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log] for the session parameter: [$PMSessionLogFile].
DIRECTOR > VAR_27028 use override the [26] value for parameter mapping: [$DATASOURCE_NUM_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_TYPE].
DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].
DIRECTOR > override VAR_27028 use value [01/01/1970] parameter mapping: [$INITIAL_EXTRACT_DATE].
DIRECTOR > override VAR_27028 use value [01/01/1990] parameter mapping: [$LAST_EXTRACT_DATE].
DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [$LEDGER_ID_LIST].
DIRECTOR > VAR_27028 use override the value ["NONE"] parameter mapping: [$LEDGER_TYPE_LIST].
DIRECTOR > session initialization of TM_6014 [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] at [Sat Oct 18 09:46:13 2013].
DIRECTOR > name of the repository TM_6683: [infor_rep]
DIRECTOR > TM_6684 server name: [infor_int]
DIRECTOR > TM_6686 folder: [SDE_ORAR1211_Adaptor]
DIRECTOR > Workflow TM_6685: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] running Instance name: Id series []: [2130]
DIRECTOR > mapping TM_6101 name: SDE_ORA_GL_AR_REV_LinkageInformation_Extract [version 1].
DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled
DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]
DIRECTOR > TM_6827 [C:\Informatica\server\infa_shared\Storage] will be used as the storage of session directory [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full].
DIRECTOR > cache CMN_1805 recovery is removed when running in normal mode.
DIRECTOR > CMN_1802 Session recovery cache initialization is complete.
DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property
DIRECTOR > configuration using [OraDateToTimestamp, Yes] TM_6708 property
DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property
DIRECTOR > TM_6708 using the configuration property [SiebelUnicodeDB, [APPS] @[54.225.65.108:1521:VIS] [DWH_REP2]@[AMAZON-9C628AAE:1521:obiaDW1]]
DIRECTOR > TM_6703 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] is headed by [node01_AMAZON-9C628AAE], version [9.1.0 HotFix2] 32-bit integration Service, build [0903].
MANAGER > PETL_24058 Running score of the Group [1].
MANAGER > initialization of engine PETL_24000 of parallel Pipeline.
MANAGER > PETL_24001 parallel Pipeline engine running.
MANAGER > session initialization PETL_24003 running.
MAPPING > CMN_1569 Server Mode: [ASCII]
MAPPING > code page of the server CMN_1570: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING > TM_6151 the session to the sort order is [binary].
MAPPING > treatment of low accuracy using TM_6156.
MAPPING > retry TM_6180 blocking logic will not apply.
MAPPING > TM_6187 Session focused on the target validation interval is [10000].
MAPPING > TM_6307 DTM error log disabled.
MAPPING > TE_7022 TShmWriter: initialized
MAPPING > Transformation TE_7004 Parse WARNING [IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || > > > > DISTRIBUTION_ID < < < <.
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | (> > > > DISTRIBUTION_ID < < < <).
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || (> > > > DISTRIBUTION_ID < < < <)
]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [JE_HEADER_ID |] '~' || JE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > JE_HEADER_ID < < < < | '~' || JE_LINE_NUM < < PM Parse WARNING > > [JE_LINE_NUM]: operand is converted to a string
... JE_HEADER_ID | '~' || [> > > > JE_LINE_NUM < < < <]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [AE_HEADER_ID |] '~' || AE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > AE_HEADER_ID < < < < | '~' || AE_LINE_NUM < < PM Parse WARNING > > [AE_LINE_NUM]: operand is converted to a string
... AE_HEADER_ID | '~' || [> > > > AE_LINE_NUM < < < <]; transformation continues...
MAPPING > TM_6007 DTM initialized successfully for the session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].
MANAGER > PETL_24004 from the tasks before the session. : (My Sep 18 09:46:13 2013)
MANAGER > task PETL_24027 before the session completed successfully. : (My Sep 18 09:46:13 2013)
DIRECTOR > PETL_24006 from data movement.
MAPPING > Total TM_6660 Buffer Pool size is 12582912 bytes and block size is 128000 bytes.
READER_1_1_1 > DBG_21438 Reader: Source is [54.225.65.108:1521/VIS], [APPS] users
READER_1_1_1 > BLKR_16003 initialization completed successfully.
WRITER_1_ * _1 > WRT_8146 author: target is the database [AMAZON - 9C628AAE:1521 / obiaDW1], [DWH_REP2], loose [on] mode users
WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.
WRITER_1_ * _1 > target WRT_8124 W_GL_LINKAGE_INFORMATION_GS of Table: SQL INSERT statement:
INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,GL_ACCOUNT_ID,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GL_LINKAGE_INFORMATION_GS]
WRITER_1_ * _1 > WRT_8003 writer initialization complete.
READER_1_1_1 > BLKR_16007 player run began.
READER_1_1_1 > RR_4029 SQ [SQ_XLA_AE_LINES] User Instance specified SQL query [SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS                         = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
[AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ("NO")]
READER_1_1_1 > RR_4049 SQL query sent to the database: (Wed Sep 18 09:46:13 2013)
WRITER_1_ * _1 > WRT_8005 writer run began.
WRITER_1_ * _1 > WRT_8158
START SUPPORT SESSION *.
Startup load time: Fri Sep 18 09:46:13 2013
Target table:
W_GL_LINKAGE_INFORMATION_GS
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > RR_4035 SQL Error]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS                         = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
Fatal error Oracle
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS                         = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
[Error fatal Oracle].
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > BLKR_16004 ERROR: prepare failed.
WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.
WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load
WRITER_1_ * _1 > time full load WRT_8035: Sun Sep 18 09:46:13 2013
SUMMARY OF THE LOAD
============
WRT_8036 target: W_GL_LINKAGE_INFORMATION_GS (Instance name: [W_GL_LINKAGE_INFORMATION_GS])
WRT_8044 responsible for this target data no.
WRITER_1_ * _1 > WRT_8043 * END LOAD SESSION *.
MANAGER > PETL_24031
PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.
Thread [READER_1_1_1] created [stage play] point score [SQ_XLA_AE_LINES] is complete. Running time total was enough for significant statistics.
[TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_XLA_AE_LINES]. Running time total was enough for significant statistics.
Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GL_LINKAGE_INFORMATION_GS]. Running time total was enough for significant statistics.
MANAGER > PETL_24005 from tasks after the session. : (My Sep 18 09:46:14 2013)
MANAGER > task of PETL_24029 after the session completed successfully. : (My Sep 18 09:46:14 2013)
MAPPING > TM_6018 the session completed with errors of processing row [0].
MANAGER > parallel PETL_24002 engine Pipeline completed.
DIRECTOR > Session PETL_24013 run duly filled with failure.
DIRECTOR > TM_6022
PLENARY OF THE LOAD
================================================
DIRECTOR > TM_6252 Source load summary.
DIRECTOR > Table CMN_1740: [SQ_XLA_AE_LINES] (name of the Instance: [SQ_XLA_AE_LINES])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6253 Target Load summary.
DIRECTOR > Table CMN_1740: [W_GL_LINKAGE_INFORMATION_GS] (name of the Instance: [W_GL_LINKAGE_INFORMATION_GS])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6023
===================================================
DIRECTOR > TM_6020 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] to [Sat Oct 18 09:46:14 2013].
------------------------------------------------------------------------------------------------------------------------------------------------------------------
* I made a few requests in my source (Vision) database, table "XLA_EVENTS" exists, column "UPG_BATCH_ID" exists also
* I added 'XLA_EVENTS' to the FROM clause and he ran in SQL Developer

* in the SELECT clause, I see a column named 'AEHEADER. EVENT_TYPE_CODE ".
but there is no table named 'AEHEADER' in the FROM clause
so I added it manually, it is without doubt makes reference to 'XLA_AE_HEADERS '.
The final request looks like this:
SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
XLA_AE_HEADERS AEHEADER
XLA_EVENTS
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS                         = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
* When I run this query, it takes a lot of run time without return no result (it took 4 hours to cancel it, I got the last time)
my questions are:
-What is the problem with this query?
-How can I change the query in the workflow?
could someone please help?

Check if the session is reusable or non-reusable. If his re-usable, so you may need to modify the sql query in the window of the tasks

OLIVIER 11.1.1.7.1 - load Plan "From field only and charge (SDE and SIL)" fails at the first stage

Hello
I'm BIAPPS 11.1.1.7.1 configuration and her charge leading "extract domain only and charge (SDE and SIL)" (started in Confugration Manager) fails with the following error.
ODI-1519: series step 'Load start Plan (InternalID:683500)' failed because step 'Refresh Global Variable (InternalID:684500)' child is in error. ODI-1529: updating of the variable 'BIAPPS.13P_CALENDAR_ID' failed: to select WHEN "Refresh of the Global Variable" in (select distinct group_code from C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID') THEN (select param_value in the C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and group_code = 'Global Variable Refresh' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') ELSE (select param_value in the C_GL_PARAM_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') END of the double ODI-1533: Error refreshing variable 'BIAPPS.13P_CALENDAR_ID': could not get a link to the logical schema "CM_BIAPPS11G" using the OVERALL context.
Investigation when I looked for info of logical connection diagram CM_BIAPPS11G (Physical schema BIAPPS_BIACOMP) in the topology Manager, JDBC connection string is empty and name of user and password is set up. My questions are so
(1) is this a normal behavior that CM_BIAPPS11G receive the JDBC connection string & name of user and password of dynamically at run time?
(2) If yes then how this string is passed and where it get stored?
(3) I'm tempted to the name of user and password string / JDBC hardcode in the ODI topology manager and kickoff of work load here. Do you see any risk in doing this?
Any pointer/suggestion will be highly appreciated.
Thanks and greetings

JDBC and name of username/password used to store in rather logical physical then diagram... its ok to hardcode those details under physical schema...

Just logic diagram retrieve this information at the time of execution to load data in temporary tables...

Please let me know if I'm wrong...

See you soon!

SH! going

DAC: tasks failed during the ETL for financial applications

I'm looking for my first ETL on OLIVIER 7.9.6.4
I use Oracle EBS 12.1.1 as source system.
the ETL full 200 + tasks successfully, but it fails for the rest of them
first task that fails is:
SDE_ORA_GL_AR_REV_LinkageInformation_Extract

Error message:
All the batch jobs
Lot of Informatica Session
------------------------------
INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL)
------------------------------
2013-09-03 14:57:14.627 acquisition of resources
2013-09-03 14:57:14.643 acquired resources
2013-09-03 14:57:14.658 INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL) began.
FAULT INFO: Error executing: INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL)
Message:
Fatal error
pmcmd startworkflow sv - infor_int d Domain_AMAZON-9C628AAE - u Linguiste2 Pei * f SDE_ORAR1211_Adaptor - paramfile C:\Informatica\server\infa_shared\SrcFiles\SDE_ORAR1211_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full
Status / / Desc: failure
WorkFlowMessage:
Error message: unknown reason 36331 error code
Error code: 36331
EXCEPTION CLASS: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)
java.util.concurrent.FutureTask.run (unknown Source)
java.util.concurrent.Executors$ RunnableAdapter.call (unknown Source)
java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)
java.util.concurrent.FutureTask.run (unknown Source)
java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)
java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
java.lang.Thread.run (unknown Source)
(Number of attempts: 1).
pmcmd startworkflow sv - infor_int d Domain_AMAZON-9C628AAE - u Linguiste2 Pei * f SDE_ORAR1211_Adaptor - paramfile C:\Informatica\server\infa_shared\SrcFiles\SDE_ORAR1211_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full
2013-09-03 15:15:01.346 INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL) has finished running with the Failed state.
------------------------------
(Failed)
After that, many dependent tasks fail
log files of session at the "SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full_SESSIONS.log":
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called my Sep 03 15:14:24 2013
Connected to the Service of integration: [infor_int].
File: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]
Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]
Success of the source lines: [0]
Source has no lines: [0]
Target lines of success: [0]
Target lines failed: [0]
Number of errors in transformation: [0]
First error code [4035]
First error message: [[error SQL RR_4035
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATI]
Task run status: [failure]
Integration service: [infor_int]
The integration of Service process: [infor_int]
Grid integration Service: [infor_int]
----------------------------
Name of node [node01_AMAZON-9C628AAE]
Fragment of preparation
Partition: #1 [Partition]
Instance of transformation: [SQ_XLA_AE_LINES]
Transformation: [SQ_XLA_AE_LINES]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last [16004] error code, message [ERROR: prepare failed.: []]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_CO]
Departure time: [kills Sep 03 15:06:16 2013]
End time: [kills Sep 03 15:06:16 2013]
Partition: #1 [Partition]
Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]
Transformation: [W_GL_LINKAGE_INFORMATION_GS]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last error code [0], message [no errors].
Departure time: [kills Sep 03 15:06:20 2013]
End time: [kills Sep 03 15:06:20 2013]
Disconnection of Service integration
Finished my Sep 03 15:14:59 2013
=====================================
ERROR OUTPUT
=====================================
the next task of fault is:
SDE_ORA_APTransactionFact_Payment_Full
Error log:
java.lang.Thread.run (unknown Source)
305 SEVERE kills Sep 03 11:19:43 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_Payment_Full with the name of the instance SDE_ORA_APTransactionFact_Payment_Full" finished with the error code 0
306 SEVERE kills Sep 03 11:20:16 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_PaymentSchedule_Full with the name of the instance SDE_ORA_APTransactionFact_PaymentSchedule_Full" finished with the error code 0
307 SEVERE kills Sep 03 11:20:18 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_Distributions_Full with the name of the instance SDE_ORA_APTransactionFact_Distributions_Full" finished with the error code 0
308 SEVERE kills Sep 03 11:20:24 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten with the name of the instance SDE_ORA_Stage_ValueSetHier_Flatten" finished with the error code 0
311 SEVERE kills Sep 03 11:22:14 GMT 2013 MESSAGE: no value for @DAC_SOURCE_PRUNED_REFRESH_TIMESTAMP available!
I searched online but can't find useful information about errors
could someone help, please?

Another question: can I continue the ETL when it fails? without starting from the beginning?

Hi Mate,

Simply delete the duplicate value, it is not a problem

Finally give the validation in your PB, make waiting in line and raise your execution plan...

I'm sure that this task is now complete.

It will be a great help on your side, if you share did you read me the article. and give me the number?

I am also looking for a validation script now.

Thank you

Guylain

mkashu.blogspot.com

Converter 5.0 fails at the first stage the conversion

Hello, I am trying to convert physical ENT W2K8 64bits in virtual server, but I got an error occurred during the coversion: 'unknown Exceptions. I use VMware vCenter Converter Standalone server 5.0.0 installed on the same server as VMware vCenter Server 5.0.0. I have two hosts in cluster, one is ESXi 5.0.0 another ESX 4.1.0 but I think that the problem exists not in hosts. Maybe someone has an idea how to solve my problem?

Hello

Ask you to check 4 points

(1) cross weather check NetBIOS over TCP/IP is enabled in your physical server.

(2) Windows Installer, Windows module installer and WMI Performance fit and the virtual disk services are running.

(3) service of Windows Firewall is stop

(4) any of the below mention of the ports are open in the firewall.

Source	Destination	TCP ports	UDP ports	Notes
Server Converter	Source computer	445, 139, 9089 or 9090	137, 138	If the source computer uses NetBIOS, port 445 is not necessary. If NetBIOS is not used, ports 137, 138, and 139 are not required. When in doubt, make sure that none of the ports are blocked. 9089 port is used for the Converter Standalone versions and 9090 is used for the converter plugin. Note: unless you have installed the Converter to the source computer server, the account used for the authentication of the source computer must have a password, the source computer must be network enabled file sharing, and it can't use Simple file sharing.
Server Converter	VirtualCenter	443		Required only if the target of conversion is VirtualCenter.
Client converter	Server Converter	443		Only necessary if a custom installation has been completed and the portions of server and client of the converter are on different computers.
Source computer	ESX	443, 902		If the target of conversion is VirtualCenter, single port 902 is required.

SP 2 update fails in the third stage during reboot after update

Downloaded SP2 without problem.
Update is done without a problem.
PC re - starts automatically.
Poster "Phase 1/3, then Phase 2/3 SP2 installation Phase 3/3.»
100% of Phase 3 and sits there for a long time.
Later displays "Installation failed, removing all SP @ updates"
Sits with the above display for a long time.
Re-boots at the login screen.

That is what it is.

HP Pavilion S3100n, Vista Home Premium 32-bit with all updates prior to SP2.

Hi Keithg,

Thank you for visiting the Microsoft Answers forum.
As one of the troubleshooting steps I recommend trying to install the SP1 update as a standalone, follow these steps.

Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

How to obtain the stand-alone package for the service pack

To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

935791 (http://support.microsoft.com/kb/935791/) how to obtain the latest Windows Vista service pack

Solution 2: Run the system update readiness tool

System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:
1. Click Start
2. In the Search box, type system, and then click System in the programs list.
The operating system is displayed as follows:
- For a 32 - bit version operating system, 32-bit operating system appears for the system type under System .
- For a 64 - bit version operating system, 64-bit operating system appears for the system type under System .
After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

How to download the system update tool

You can download the preparation tool system update from the following Microsoft Download Center Web site:

http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

The following files are available for download from the Microsoft Download Center:

Windows Vista

Download the Windows Vista package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27 & amp; DisplayLang = en)

Windows Vista for x 64 systems

Download Windows Vista for the systems based on x 64 package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d & amp; DisplayLang = en)

Hope this information is useful.

Let me know if it worked.

All the best!

Best regards, Joseph.N sunny. Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

Vista install fails on the second stage. "Install.wim is missing or damaged.

I am trying to reinstall Vista Ultimate on a computer, E-Machines, and it gives me the message "Install.wim is missing or damaged. I have no idea why this is happening. I used my cell phone to check the disk for the file, and it is there and seems to be ok. Any ideas? Note: The disc seemed scratched, so I used a disc repair system that actually works, but who have done nothing. I want to reinstall because of the problem of the BSOD I have. Every day there are at least a Blue Screen of Death.

If it is scratched, replace:

http://support.Microsoft.com/default.aspx/KB/326246

'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

See you soon.

Mick Murphy - Microsoft partner

Creating a container of the package fails on the last stage by renaming the .exe in .dat

I tried several times to create a package without success. All files seem to have downloaded when I look in C:\Users\MichaelK\AppData\Local\Adobe. There is data here 14.5Gig.
I get the following.
25/11/2015 15:20:04 [INFO] AdobePackageBuilder - Build Version - 1.9.2.53
25/11/2015 15:20:04 [INFO] AdobePackageBuilder - verbosity Logging Level Set of 4
25/11/2015 15:20:10 [INFO] AdobePackageBuilder - Sucessfully extracted products at D:\Temp\{5B1E86DF-7A0C-4934-89B3-5EBADC1096D9}\ACCCx3_4_0_180
25/11/2015 15:20:10 [INFO] AdobePackageBuilder - Extraction completed with return code = 0
25/11/2015 15:20:16 [WARN] AdobePackageBuilder - no file exist at the (D:\Downloads\Adobe CC\CC Install\Build\ASU\Tools\CCC\Uninstall\deploy\remove.xml)
25/11/2015 15:20:18 [INFO] AdobePackageBuilder - copied the file/folder Installer (packages)
25/11/2015 15:20:19 [INFO] AdobePackageBuilder - Setup copy file/folder (resources)
25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied the file (Set - up.exe)
25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.db)
25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.sig)
25/11/2015 15:20:19 [INFO] AdobePackageBuilder - copied file (payloads\Setup.xml)
25/11/2015 15:20:22 [INFO] AdobePackageBuilder - copied the file/folder Installer (packages)
25/11/2015 15:20:23 [INFO] AdobePackageBuilder - Setup copy file/folder (resources)
25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied the file (Set - up.exe)
25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.db)
25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.sig)
25/11/2015 15:20:23 [INFO] AdobePackageBuilder - copied file (payloads\Setup.xml)
25/11/2015 15:20:23 [ERROR] AdobePackageBuilder - cannot rename the path (D:\Downloads\Adobe CC\CC Install\Build\Setup\AME9.0en_GB\Set-up.exe) to the path (D:\Downloads\Adobe CC\CC Install\Build\Setup\AME9.0en_GB\Set-up.dat)
How can I successfully create a container to the package.

Have you tried to clear the cache of CCP and try again? Damaged in the cache files can cause errors when building your package.

Go to the 'Welcome' on the menu drop-down menu > Preferences, then choose "click here to purge the cache folder.

DAC 11.1.1.6.4 fails with the error cannot get columns: ORA-01403: no data found

Hello
We strive to run a full charge in DAC, but it is a failure.
The S_ASSET table is empty and therefore, we get the error
Could not get column: ORA-01403: no data found
We were not facing this error in DAC 10 g but after upgrade to DCA 11 g, this task has no place if the array is empty. How remove this restriction and DAC will work perfectly even if the tables are empty to full charge?
CAD DETAILS
Console Administration Oracle BI DW
CAD build a 11.1.1.6.4.20121119.2022 Build date: November 19, 2012
Management Console to install, configure, and administer the Warehouse Analytics of Oracle Business
Schema version - 47, Index version - 36, repository version - 6, data version Seed - 16
INFORMATICA - VERSION9.0.1 HF2

Here's the log of IMG_BUILD - S_ASSET when this task was running in DAC 10 g. The task facing any problem when S_ASSET table was empty.
[code]
2013-12-23 15:34:29.644 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.
the number of days of prunes: 4
After change data capture: 2013-12-19 12:23:19.332 in full Mode.
2013-12-23 15:34:29.69 - execution:
TRUNCATE TABLE S_ETL_I_IMG_6
2013-12-23 15:34:29.89 - executed successfully.
2013-12-23 15:34:29.9 - execution:
TRUNCATE TABLE S_ETL_R_IMG_6
2013-12-23 15:34:30.145 - executed successfully.
2013-12-23 15:34:30.16 - execution:
TRUNCATE TABLE S_ETL_D_IMG_6
2013-12-23 15:34:30.198 - executed successfully.
2013-12-23 15:34:30.236 - execution:
INSERT / * + APPEND * / INTO S_ETL_R_IMG_6
(ROW_ID, MODIFICATION_NUM, LAST_UPD)
SELECT
ROW_ID
MODIFICATION_NUM
LAST_UPD
Of
S_ASSET
WHERE
LAST_UPD > TO_DATE ('2013-12-19 12:23:19 ',' ' YYYY-MM-DD HH24:MI:SS)
2013-12-23 15:34:30.968 - executed successfully.
2013 12-23 15:34:30.989 - execution of deleting duplicates rowid.
2013-12-23 15:34:31.01 - successfully deleting duplicates rowid.
2013-12-23 15:34:31.27 - execution:
DROP VIEW V_ASSET
2013-12-23 15:34:31.566 - executed successfully.
2013-12-23 15:34:31.569 - execution:
CREATE VIEW V_ASSET AS
SELECT
*
Of
S_ASSET
2013-12-23 15:34:31.743 - executed successfully.
2013-12-23 15:34:31.78 - execution:
SELECT COUNT (*) IN S_ASSET
The County is: 0
Executed successfully: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET
(Number of attempts: 1).
Executed orders:
IMG_BUILD - internal
2013-12-23 15:34:31.851 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the completed state.
The same task, IMG_BUILD - S_ASSET fails when it is running in DAC 11 g, because the table is empty. Here is the log for the failure of the task to 11g.
[code]
2013-12-27 21:21:47.497 acquisition of resources
2013-12-27 21:22:20.33 acquired resources
2013-12-27 21:22:20.787 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.
the number of days of plum: 5760
After change data capture: 2013-12-23 21:19:19.233 in full Mode.
21:22:21.211 2013-12-27 - execution:
TRUNCATE TABLE S_ETL_I_IMG_6
2013-12-27 21:22:22.384 - executed successfully.
21:22:22.389 2013-12-27 - execution:
TRUNCATE TABLE S_ETL_R_IMG_6
2013-12-27 21:22:22.532 - executed successfully.
21:22:22.534 2013-12-27 - execution:
TRUNCATE TABLE S_ETL_D_IMG_6
2013-12-27 21:22:22.546 - executed successfully.
21:22:22.55 2013-12-27 - execution:
INSERT / * + APPEND * / INTO S_ETL_R_IMG_6
(ROW_ID, MODIFICATION_NUM, LAST_UPD)
SELECT
ROW_ID
MODIFICATION_NUM
LAST_UPD
Of
S_ASSET
WHERE
LAST_UPD > TO_DATE ('2013-12-23 21:19:19 ',' ' YYYY-MM-DD HH24:MI:SS)
2013-12-27 21:22:22.614 - executed successfully.
2013 12-27 21:22:22.616 - execution of deleting duplicates rowid.
2013-12-27 21:22:24.72 - successfully deleting duplicates rowid.
Could not get column: ORA-01403: no data found
FAULT INFO: Error executing: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET
MESSAGE: com. Siebel.Analytics.etl.Execution.exceptions.ChangeCaptureTaskFailedException: Change Capture failed.
EXCEPTION CLASS: java.lang.RuntimeException
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:536)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:619)
: CAUSE:
MESSAGE: change Capture failed.
EXCEPTION CLASS: com.siebel.analytics.etl.execution.exceptions.ChangeCaptureTaskFailedException
com.siebel.analytics.etl.etltask.ChangeCaptureTask.executeChangeCapture(ChangeCaptureTask.java:93)
com.siebel.analytics.etl.etltask.ChangeCaptureTask.doExecute(ChangeCaptureTask.java:46)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)
java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:619)
(Number of attempts: 1).
IMG_BUILD - internal
2013-12-27 21:22:31.526 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the Failed state.
[[code

The CREATE VIEW privilege was missing from the CAD database user, therefore, was not to create the step. I have granted CREATE VIEW and all is well.

B570 display fails after the display dual display

After doing that my B570 (1068) with an extended display, the unit has entered hibernation. Wake up, the laptop screen is indecipherable garbage. The second screen is performed to show the BIOS boot but then returns to the built-in screen - what is unreadable. Activating/Deactivating the F3 key does not get a good screen.

I read another post suggesting that it is a hardware failure. What parts have failed?

I was able to get the machine to dual screens (instead of expand). I downloaded the latest drivers from Intel Intel and reinstalled successfully their.

The problem is still not changed - the built-in screen is distorted unintelligbly and the second screen normally. This signals a hardware problem... inverter or lcd display?

Get the name of the current stage of MainSequence in parallel sequence

Hello

I starts a sequence in parallel of the MainSequence by "use new run." This parallel sequence is constantly in querying CPU performance data for my USE and records 'on the fly' an Excel file while the MainSequence turns the test scenario.

To get a clear reference of the performance of the CPU DUT to test steps, I need to somehow get the name of the step of the test step currently performed in the MainSequence for saving it and the CPU performance data.

Is it possible to identify the current stage of the main sequence in the parallel sequence (for example, property)?

Thanks in advance,

MRet

Rette01 wrote:

Hi Doug,.

Finally, we have updated to TestStand 2013 and try to use your example.

We have some problems to get the referral of wire, which is replaced by "threadToMonitor" in the expression you have posted, as far as I understand.

The thread to monitor is the MainSequence. So, how can I get a reference to the MainSequence?

Kind regards

Rette01

Pass RunState.Thread as a parameter to the call of the sequence. The parameter must be specified as an object reference variable.

-Doug

Home Vista premium: KB978338 fails with the error code 80004005

Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows. The PC then realized... Updates not configured correctly - returning changes.

Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

Hi gbislay,

I think that you are able to get on the desktop after changes have been restored.

Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

The system update tool

Step 3: Clean boot the computer

Follow step 1 in the link below,

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

You can see the steps outlined in the article below, which deals with a similar question

Windows Update error 800f0826

The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

Thanks and greetings
Ajay K

Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.

KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later. If someone else sees this problem and is at - it a solution? I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system. Help?

Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

How will I know if my computer is up to date?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Windows Update fails with the error 'WindowsUpdate_0000057E '.

I have windows vista, but my microsoft office is 2002.

For the latest updates of the week 2 windows keep failing.
1 security Update for Microsoft Excel 2002 (KB959988)
2. Update for Office XP (KB933388)

Whenever the update fails, I get the error "WindowsUpdate_0000057E".

I'm not good with computers and need help on how to fix this...
When you try to download an ActiveX control, install an update to Windows or to a Windows component, install a service pack for Windows or to a Windows component, or install a Microsoft or third-party software, you may experience one or more of the following symptoms:
- You may receive the following error message when you try to install a program or update:
  
  Digital signature not found
  The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been changed since then, it has been tested.
  The software you are about to install does not contain a Microsoft digital signature. There is therefore no guarantee that this software works correctly with Windows.
  Package name
  If you want to search for Microsoft digitally software signed, refer to the Windows Update Web site at http://windowsupdate.microsoft.com to see if one is available.
  Do you want to continue the installation?
  
  If you click Details, you receive the following message is displayed:
  
  Microsoft Windows
  The signature on the software package you want to install is not valid. The package is not signed correctly.
  
  After you click OK in the first error message dialog box, you may receive a message that States that the installation was successful, or you may receive the following error message:
  
  Name of the Update Package
  The cryptographic operation failed due to a local security option setting.
- When you try to install an update or to install a service pack, you may receive an error message that is similar to one of the following:
  - Name of the Update Package
The Setup program could not verify the integrity of the file Update.inf. Make sure the cryptographic service is running on this computer.
Failed to install catalog files.
The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important).

This software will not be installed. Contact your system administrator.

The software you are installing has not passed Windows Logo testing to verify its compatibility with this version of Windows. (Tell me why this testing is important).
When you try to install a service pack Windows XP, you may receive an error message similar to the following:
Service Pack 1 Setup could not verify the integrity of the file. Make sure the cryptographic service is running on this computer
When you try to install Microsoft Data Access Components (MDAC) 2.8, you may receive an error message similar to the following:
«"" "INF. cause installation failure: the timestamp signature and/or certificate could not be verified or is incorrect.»»»"
The %WINDIR%\System32\CatRoot2\Edb.log may reach 20 megabytes (MB) even though the file is typically less than 1 MB.
When you try to install a package from the Windows Update Web site or the Microsoft Update Web site, you may receive a message that is similar to the following:
The software has not passed Windows logo testing and will not be installed.
When you examine the file % systemroot%\Windowsupdate.log, you should see an entry for one of the following errors:
- 0 x 80096001
- 0 x 80096005
- 0 x 80096010
- 0x800B0001
- 0x800B0003
- 0x800B0004
- 0x800B0109
- 0x8007F0DA
- 0x8007f01e
When you use Microsoft windows update on a Windows XP-based computer, the update process may fail and you may receive an error message "0x8007f007". This can happen regardless of what type of update you select.

The Svcpack.log file may contain entries that are similar to the following:

937.406: GetCatVersion: failed to retrieve version information from C:\WINDOWS\system32 \CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Tmp.0.scw.cat with error 0 x 57 937.437: GetCatVersion: failed to retrieve the version information of C:\WINDOWS\Tmp.0.scw.cat with error 0 x 80092004 940.344: InstallSingleCatalogFile: failure failed for Tmp.0.scw.cat; error = 0xfffffbfe. 940.344: DoInstallation failed failed: STR_CATALOG_INSTALL_FAILED 955.125: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2 955.125: DoInstallation: has no cancellation of registration of spuninst.exe for recovery. 962.656: cancel registration of uninstall-> Windows Server 2003 Service Pack, 0 962.656: impossible to install catalog files. 1448.406: message displayed to the user: cannot install catalog files. 1448.406: user Input: OK 1448.406: Update.exe extended error code = 0xf01e 1448.406: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

CAUSE

This problem may occur if one or more of the following conditions are met: Log...

This problem may occur if one or more of the following conditions are met:

Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
Cryptographic services is set to disabled.
Other Windows files are corrupted or missing.
The timestamp signature or the certificate cannot be verified, or is incorrect.
The hidden attribute is set to the folder %windir%, or one of its subfolders.
No unsigned installation behavior group policy setting (Windows 2000 only) is set to do not allow installation or warn, but allow installationor the policy of binary value is not set to 0 in the following registry key:
The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
The group policy enable trusted publisher lockdown setting is turned on, and you do not have the appropriate certificate in your trusted publishers certificate store. This group policy setting is under User Configuration, under Windows settings, Internet Explorer Maintenance, under Security, under Authenticode settings in the Group Policy MMC snap-in.
You install Internet Explorer 6 SP1 and the update of security 823559 (MS03-023) is installed. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
828031 (http://support.microsoft.com/kb/828031/) error "the software you are installing has not passed Windows Logo testing...". "message when you try to install Internet Explorer 6 Service Pack 1
The software distribution folder is corrupted.

RESOLUTION

To resolve this problem, use the following methods. Once you perform the operations...

To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

Method 1: Rename the Edb.log file rename the Edb.log file, and then try again to install the program. To rename the Edb.log file, follow these steps:

Click Start, click run, type cmd in the Open box, and then OK.

Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.
At the command prompt, type the following command and press ENTER:
Ren %systemroot%\system32\catroot2\Edb.log *.tst

Method 2: Set the Services of cryptography on AutoSet to automatic Cryptographic Services and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

Start the Administrative Tools utility in control Panel.
Double-click Services.
Click Cryptographic Services, and then click Properties.
Click Automatic for Startup type, and then click Start.

Note Windows 2000 does not list Cryptographic Services in the SERVICES Administration utility.

Method 3: Rename the folder Catroot2 rename the Catroot2 (Windows XP and Windows Server 2003 only) folder and then try to install the program again.

Note Skip this method if the operating system is Windows 2000.

To rename the Catroot2 folder, follow these steps:

Click Start, click run, type cmd, and then click OK.
At the command prompt, type the following commands and press ENTER after each line:
net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output
Remove all tmp*.cat to the following folder:
% systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

Method 4: Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

Click Start, click run, type cmd in the Open box, and then OK.

Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.
At the command prompt, type the following commands and press ENTER after each command:
regsvr32 /u softpub.dll
regsvr32 /u wintrust.dll
regsvr32 /u initpki.dll
regsvr32 /u dssenh.dll
regsvr32 /u rsaenh.dll
regsvr32 /u gpkcsp.dll
regsvr32 /u sccbase.dll
regsvr32 /u slbcsp.dll
regsvr32 /u mssip32.dll
regsvr32 /u cryptdlg.dll
output

Note If you are prompted, click OK .

Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
Restart your computer.
Click Start, click run, type cmd in the Open box, and then click OK.
At the command prompt, type the following commands and press ENTER after each command:
regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 mssip32.dll
regsvr32 cryptdlg.dll
output

Note If you are prompted, click OK .

Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
Restart the computer.

Method 5: Remove the hidden %windir%\System32 and its subfolders attribute

Click Start, click run, type cmd in the Open box, and then OK.

Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.
At the command prompt, type the following commands, pressing ENTER after each line:
attrib s h % windir %
attrib s h %windir%\system32
attrib s h %windir%\system32\catroot2

Method 6: Set a strategy without driver signature silently succeed if you are running a version of Windows 2000, set the silent success no unsigned installation behavior group policy setting. This group policy setting located under Computer Configuration, under Windows settings, under security settings, under local policies, under Security Options in the Group Policy MMC snap-in. If you are running Windows XP or a later version of Windows, this group policy setting is no longer supported. In this case, follow these steps to resolve this problem:

Click Start, click run, type regedit, and then click OK.

Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.
Locate and then click the following key in the registry:
The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
Right-click on the Policy binary value, and then click change.
The value data will appear in the following format:
0000 02

Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).
Click OK, and then quit the registry editor.

Method 7: Temporarily turn off Trusted Publishers Lockdown and install the certificates to your trusted publishers certificate store you can continue to use the group policy enable trusted publisher lockdown setting, but you must first add the certificates in your trusted publishers certificate store. To do this, disable the group policy enable trusted publisher lockdown setting, install the certificates in your certificate and then trusted publishers store on the setting of group policy enable trusted publisher lockdown again. To install the certificate suitable for Microsoft Windows and Microsoft Internet Explorer updates, follow these steps:

Download the product of Microsoft update you want to install from the Microsoft Download Center, the Windows Update Catalog or the Microsoft Update Catalog. For more information about how to download updates from Microsoft Download Center, click the number below to view the article in the Microsoft Knowledge Base:

119591 (http://support.microsoft.com/kb/119591/) how to obtain technical support files from Online Services Microsoft

For more information about how to download updates from the Windows Update Catalog, click on the number below to view the article in the Microsoft Knowledge Base:

323166 (http://support.microsoft.com/kb/323166/) how to download updates that include drivers and hotfixes from the Windows Update Catalog

Extract the package to update product in a temporary folder. The command line that you use to do this depends on the update that you are trying to install. View the Microsoft Knowledge Base article associated with the update to determine the command line switches appropriate that you will use to extract the package. For example, to extract the 824146 security for Windows XP update to the C:\824146 folder, run Windowsxp-kb824146 - x 86 - enu - x: c: \824146. To extract the 828750 security for Windows XP update to the C:\828750 folder, run q828750.exe/c t:c:\828750.
Right click on the file KBNumber.cat to the package to update product to the temporary folder you created in step 2, and then click Properties.
Note The KBNumber.cat file may be in a subfolder. For example, the file may be in the C:\824146\sp1\update folder or in the C:\824146\sp2\update folder.
On the Digital Signatures tab, click the digital signature and then click Details.
Click view certificate, and then click install Certificate.
Click Next to start the Certificate Import Wizard.
Click place all certificates in the following store, and then click Browse.
Click approved publishers, and then click OK.
Click Next, click Finish, and then click OK.

Method 8: Check the status of all certificates in the certification path and import missing certificates or damaged from another computer to verify certificates in the path of certificate for a Windows or Internet Explorer product update, follow these steps: step 1: Verify Microsoft certificates

In Internet Explorer, click on Toolsand then click Internet Options.
On the content tab, click certificates.
Certificate authorities roots of trust tab, double-click Microsoft Root Authority. If this certificate is missing, go to step 2.
On the general tab, make sure that the dates valid from are 10/01/1997 to 12/31/2020.
Under the Certificate path tab, verify that this certificate is OK appears under certificate status.
Click OKand then double-click the NO LIABILITY ACCEPTED certificate.
On the general tab, make sure that the dates valid from are 11/05/1997 to 01/07/2004.
On the Certificate path tab, check whether the certificate has expired or is not yet valid or this certificate is OK appears under certificate status.
Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
Click OKand then double-click the GTE CyberTrust Root certificate. You can have more than one of these certificates with the same name. Check the certificate that has an expiration date of 02/23/2006.
On the general tab, make sure that the dates valid from are "23/02/1996-02/23/2006."
Under the Certificate path tab, verify that this certificate is OK appears under certificate status.
Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003

Click OK, and then double-click Thawte Timestamping CA.
On the general tab, make sure that the dates valid from are "31/12/1996 to 12/31/2020."
Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

Step 2: Import the missing certificates or damaged if one or more of these certificates are missing or corrupted, export the missing certificates or damaged on another computer, and then install the certificates on your computer. To export certificates to another computer, follow these steps:

In Internet Explorer, click on Toolsand then click Internet Options.
On the content tab, click certificates.
Certificate authorities roots of trust tab, click the certificate you want to export.
Click export, and then follow the instructions to export the certificate as a DER encoded Binary x.509 (.) REB) file.
Once the certificate file has been exported, copy it to the computer where you want to import.
On the computer where you want to import the certificate, double-click the certificate.
Click install Certificate, and then click Next.
Click Finish, and then click OK.

Method 9: Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

Remove all tmp*.cat of the following folders:

systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
Delete all the kb*.cat files in the following folders:
% systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
% systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
Remove all the oem *. * files in the % systemroot %\inf folder.
At the command prompt, type the following commands. Press ENTER after each command.
net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output
Restart the installation of the patch failed or the installation of the service pack.

Method 10: Empty the software distribution folder

Click Start, click run, type services.msc and click OK.

Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

In the Services (Local) pane, click automatic updates, and then click stop.
Reduce the Services (local) window.
Select all the contents of the Windows distribution folder, and then delete them.
Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.
Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
In the Services (Local) pane, click automatic updates, and then click Start.
Restart the computer, and then run Windows Update again.

Method 11: Perform an upgrade on site for more information about how to perform an upgrade on the spot, click on the number below to view the article in the Microsoft Knowledge Base:

315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP

MORE INFORMATION

For more information about a resolution that is intended for Windows 2000 only.

For more information about a resolution that is intended for Windows 2000 only, click on the number below to view the article in the Microsoft Knowledge Base:

281458 (http://support.microsoft.com/kb/281458/) error message when you install a service pack Windows 2000 or product update

This problem has been reported to occur with the following updates:

328310 (http://support.microsoft.com/kb/328310/) MS02-071: a failure in management of Windows WM_TIMER messages may allow elevation of privileges

810565 (http://support.microsoft.com/kb/810565/) of the hyperlinks open in Internet Explorer instead of in default browser or Help and Support Center

327979 (http://support.microsoft.com/kb/327979/) game stops responding (hangs) or when the introductory video is played

322011 (http://support.microsoft.com/kb/322011/) you cannot preview a fax in the Fax Console

811630 (http://support.microsoft.com/kb/811630/) HTML Help update to limit functionality when it is invoked with the window.showHelp method)

810577 (http://support.microsoft.com/kb/810577/) MS03-005: a buffer uncontrolled in the Windows Redirector may allow elevation of privileges

329441 (http://support.microsoft.com/kb/329441/) you cannot create a network connection after you restore Windows XP

329170 (http://support.microsoft.com/kb/329170/) MS02-070: a flaw in SMB signing may permit group policy to change

810833 (http://support.microsoft.com/kb/810833/) MS03-001: buffer uncontrolled in the Locator service may allow code to run

For more information about configuring automatic updates in Windows XP, click on the number below to view the article in the Microsoft Knowledge Base:

306525 (http://support.microsoft.com/kb/306525/) how to configure and use automatic updates in Windows XP

Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

KB 2686827 fail with the error Code Ox800B010B

KB 2686827 fails with the Ox800B010B error code

Hello Hans,.

1. what happens when you try to install the update?

2. you receive an error message or error code when you try to install the update?

3. you are facing this problem with this particular update or are you facing this problem with all the updates?

I suggest you to follow the steps and check if it helps.

Method 1: Perform a clean boot, and then check if it helps.

H OW to configure Windows XP to start in a "clean boot" State

Note: Make sure you perform the steps in How to configure Windows to use a Normal startup stateto start your computer normally.

Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.

Diagnose and automatically fix common problems with Windows Update

Method 3: Install manually updates, then check if it helps.

To install updates manually by following the steps mentioned below.

(a) go to http://www.microsoft.com/download/en/default.aspx

(b) research updates using the KB number for the update.

(c) download and install it.

Method 4: Reset Windows update components, and then check if it helps.

How to reset the Windows Update components?

To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/ )

How to back up and restore the registry in Windows

DAC performance fails at the fist stage

Similar Questions

Maybe you are looking for