DBMS_DB_VERSION + version question

Similar Questions

• HP Pavilion p6733w: BIOS version question

  HP experts out there or anyone with better information resources?  I'm looking for what type of BIOS initially provided with my computer, a HP Pavilion p6733w with a motherboard RS880 H-Alvorix.

  Hi there @chocolatejeebus,
  
  Welcome to the Forums of HP Support! I understand that you are looking for more information on the original BIOS installed on your system. I'm happy to help you with this.

  If you've never updated the BIOS on your system, or if you have updated once, then the original BIOS must always be available on your computer. This is your current BIOS or you can eat to help: desktop HP - BIOS recovery.

  The support page for your system, HP Pavilion p6733w Desktop PC, the BIOS for the Board you describe is: N-Alvorix-RS880 motherboard BIOS Update Rev A 6.07. There is no earlier version described at all.

  Please let me know if that answers your question, and if so, please mark this message as a solution. Bravo would be appreciated as well.

• WRT54G (version 2) Firmware Version Question

  Hello

  Beautiful room here. I'm glad that this facility exists.

  I have the router WRT54G version 2. Finally, I upgraded the version of firmware years before Cisco Linksys bought.

  A recent announcement by the people of Black Hat (treaties in this article of TechSpot) about their intention to publish a validation tool to exploit a vulnerability of DNS rebinding on a great many routers SOHO forced me to check for the latest update of firmware for my router.

  The interesting thing is that my router's Web interface lists the current version of the firmware as 4.30.12, but the latest version of the downloadable firmware that I see listed on the support site is 4.21.1. I'm not very surprised by this apparent anomaly. If I remember correctly, that firmware version 4.30.12 download is a beta that was supposed to fix a problem connecting WiFi to a certain type. If this version of the firmware was still considered a beta at the time of the acquisition of Linksys by Cisco - or a 'stable' later firmware version incorporating the same or better fixes for the issues addressed by 4.30.12 that had been produced at that time-so maybe 4.30.12 was ruled out.

  If you read the article of TechSpot and the associated table of preliminary vulnerability, test reports, you'll see that router WRT54G version 2 is not specifically listed. Version 3 of the router is listed as vulnerable, and version 5 of the router is not.

  So, my questions are:

  Everyone here is aware of information indicating whether or not the problem of DNS Rebinding vulnerability affects the WRT54G version 2 with the last registered (4.21.1) router firmware version?

  If so, does anyone know if yes or no Cisco plans to release an update for this old router?

  If the router is vulnerable and will not be solved with a firmware update I'll probably have myself a new LInksys router which is not listed as vulnerable. (Believe me, I'm not leaving this thread to bash Linksys. This router ran like a train of 24 hours a day for years without a single hiccup that was not directly attributable to the problems of the ISP. For the price, it's one of the best purchases of equipment I've ever done calculation. And I have done this since the beginning of the 80s when I was using a CP/M system and an Apple / / e.)

  If the 4.21.1 version firmware for WRT54G version 2 is not affected, I wonder if anyone knows if yes or no 'downgrading' of 4.30.12 to 4.21.1 is likely to lead to a failure of the router. (I'll probably try it anyway. If it brick the router I'll just go ahead and get a new one.)

  BTW, I use this router with the ease of remote administration and UPnP off and strong admin password that is changed each week. (When I always used wireless I used WPA2 AES with strong password, but I am all wired now with the systems running Debian testing).

  Forgive me for talking to myself. I decided to just go ahead and "downgrade" of the 4.30.12 firmware 4.21.1 version - just because I prefer to use a version of firmware known and supported for this material. The downgrade has gone well, so no worries about this.

  I'll look for news on whether or not this version of the firmware on this particular router is vulnerable to the flaw in DNS rebinding and acts accordingly.

  Sorry for the noise.

• 7130e upgrade OS version question

  Hi guys.

  Can you give the link to upgrade version OS 4.2.1 or 4.2.2?

  My BB model is 7130e.

  Thanks in advance.

  Visit this link for more information on the update of device OS: http://tinyurl.com/y8qs5s

  You can install software from another operator wireless device if there is any software device for your operator.

  It's an off-topic here.

  After these questions in this section of the forum:

  http://supportforums.BlackBerry.com/Rim/Board?Board.ID=Other_devices

  or here:

  http://supportforums.BlackBerry.com/Rim/Board?Board.ID=BlackBerryDeviceSoftware

• Media Center Extender and xbox - version question

  I've been recently using WMC TV recording, but I can't get the message to my TV. I think of buying any old Xbox console to get the Extender. -I really hate on the games-just the Extender. Is there a certain version of the Xbox that I have Extender? Thank you.

  Hi Dean,

  Thanks for posting this question in the Microsoft Community.

  You can go through the article to learn more about setting up a Windows Media Center.

  If you have an Extender that worked with Windows Vista, it should work with Windows 7. For example, the Xbox 360, which includes the built-in Media Center Extender functionality will work with Windows 7.

  Former dilution models that have been developed for use with Windows XP Media Center Edition 2005 do not work with Windows 7. I suggest you to be sure to read the fine print on the expansion box before you buy.

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

• Adobe Bridge CS 5.1 version question process

  I currently use Adobe Bridge CS5.1 to process my raw files.  I started to send my post production and I seeing questions or tweeking corrections other companies (they use LR5.7).  They send me to xmp... I can see the corrected image in bridge when I place their xmp in my image folder.  But I do not see real adjustments... exhibition, black, etc... That's why I can't just tweek their adjustments...

  I get a message;   The selected image uses the 2012 process.  Convert in 2010 process to set the... Convert to the 2012 process

  When I do go to the default settings.

  Can I apply a camera Raw process 2012 as my default process in Adobe Bridge CS5.1?

  If so, how?

  Thanks in advance for your help.

  Hi NiPhoto,

  > I get a message;   The selected image uses the 2012 process.  Convert in 2010 process to set the... Convert to the 2012 process >

  I can't find how you can apply a process appeared in Camera Raw v7 when your version can support up to v6.7 of Camera Raw.

  I think you will spend to CS6 at least to be able to work with files of your colleagues as editable Camera Raw files. The interface used by the process of 2012 substantially changed from the interface in 2010.

• buy the new iphone and IOS version questions

  Hello

  am about to buy a new iphone and you're wondering how to find which exact version of IOS a. sellers say its IOS is 9, well no, I want to know the version of it as if its 9.0.2 or 9.1 something like that. is it far from finding in his series on the box? I don't want to buy the iphone and do not know how to check. Help, please.

  Hello

  don't worry abt the IOS version, after having bought the phone, you can update to the latest IOS 9.3 by yourself... See you soon.

• Sansa Fuze Rockbox. Version question.

  Hey guys and girls, I need help desiphering if it is possible to install Rockbox on my Sansa Fuze special. My version is listed in my info like: V01.02.28a

  It's an old Sansa, but I've updated fairly regularly. Countless FAQ told me that the Sansa fuze V2 is incompatible with Rockbox. and if I would try to apply it on the wrong version, I want to brick my machine. But as says the version, version 01.Intro, so I ask someone here who has more experience with this sort of thing to help me.

  Thank you.

  BigBootyHoes wrote:

  Hey guys and girls, I need help desiphering if it is possible to install Rockbox on my Sansa Fuze special. My version is listed in my info like: V01.02.28a

  It's an old Sansa, but I've updated fairly regularly. Countless FAQ told me that the Sansa fuze V2 is incompatible with Rockbox. and if I would try to apply it on the wrong version, I want to brick my machine. But as says the version, version 01.Intro, so I ask someone here who has more experience with this sort of thing to help me.

  Thank you.

  Yes, it is possible.

• GoldenGate software version question

  Hello

  We are working on the transfer of our application/db between AIX and Linux x86_64.

  Our application uses goldengate software. Our installed software version GG 11.2.1.0.3 SDBA.

  But we want software version greater than 11.2.1.0.25 GG.

  Our sdba says that 11.2.1.0.3 is the same as 11.2.1.0.30 and 11.2.1.0.3 are the newer version than 11.2.1.0.25

  I don't agree with this information.

  Can someone confirm if below are true?
  

  (1) GG version 11.2.1.0.3 is not the same as 11.2.1.0.30

  (2) GG 11.2.1.0.25 version is newer than 11.2.1.0.3

  
  

  Thank you

  Ashish
  

  Can someone confirm if below are true?

  (1) GG version 11.2.1.0.3 is not the same as 11.2.1.0.30 to---> > true, check the release notes when downloading MOS to see what all the bugs are fixed in it.

  (2) GG 11.2.1.0.25 version is newer 11.2.1.0.3---> > true

  You can see the "patches and updates"-> product or family of-> select product, version, version Platform that will list you the latest OGG versions available.

  Concerning

  Vivek

• 2015 CLOUD CREATIVE VERSIONS - QUESTIONS TROLLING!

  I'm more frustrated by a cloud service that can not provide software that runs this year. My 2014 programs had to be reinstalled on my 1 year old iMac, because all versions of 2015 are so slow! I've updated everything and tried the two "solutions" and versions of InDesign, Photoshop, and Illustrator 2015 are not usable because of the delay that occurs about every 5 to 10 seconds. What is the point to pay ongoing monthly fees at the latest version does not work on a new computer?

  For assistance, please contact our support staff:

  FAQ: How to contact Adobe for support?

• Material of VMware Version Question

  Hello

  I use Vsphare 5.1 build, where most of the hardware version of the VM's vmx-09. today I noticed a few virtual machines are still showing version 8 material.

  According to our knowledge, we have created all virtual machines with the selected hardware version 9 of the same model, so can help me to determine on what basis it still shows version 8.

  is there a way to know that they never had updated or they reports incorrect hardware version.

  Thanks in advance

  takecoffe

  Hello Takecoffe

  You can use PowerCLI for this work. Connect to your vCenter using Connect-VIServer. Then use this command to get a list of server and their corresponding hardware version: Get - VM | Select Name, Version, ToolsVersion, ToolsVersionStatus

  You can also transfer this to a CSV file with a couple of more lines, see here: a PowerCLI Liners | Virtualize MeVirtualize me

  This page also has lots of useful PowerCLI oneliners to use for various tasks.

  I hope this helps.

• VM Player 6.0.1 comments Version questions

  Hello

  I just install VM Player 6.0.1 4.0 and when I try to run a Windows 2008 R2 VM Server I get the error;

  "Error when switching on: the virtual machine configuration is read-only."

  The virtual machine could not be started because the inherited configuration is no longer supported.

  "Upgrade the virtual machine or retry the operation on a compatible product.

  I also noticed that when I go in the OPTIONS under SETTINGS of the VIRTUAL MACHINE to the operating system is set to 'OTHER '.

  so I put it for Windows and then under VERSION I was going to put for Windows 2008 R2, but it wasn't there, the highest level of the version was only in Windows 2003.

  THX,

  Just found out that the virtual machine itself has been altered all works fine now.

• Free ESXi version question.

  Hello.

  I'm looking to adapt the free version of ESXi.

  I checked the limitation of the free version, but I do not see a feature available

  Please let me know what features can I use?

  Thank you.

  You can deploy and run virtual machines on it. That's basically all

  Most of these characteristics of fantasy of the paid license will require a vCenter and is not available for the free version.

  the features it will show in the license tab in client vSpere is:

  -Up to 32 GB of memory (hardware RAM in the host server)

  -Up to 8-way virtual SMP (which means that you can create virtual machines with 8 virtual processors)

  Concerning

• vCenter version question

  Hello

  I have 1 host running ESXi 4.1 build 260247.

  Earlier, we add a 2nd machine ESXi for HA.  This means that I have to also run vCenter.  I have vCenter 4.1 build 259021 installed on a computer and have added that the new host to the HA cluster.  It seems to work so far...

  We will not go to vSphere 5 for awhile.

  Questions: Should I run the last vCenter 4.1 U2?  The old machines ESXi 4.1 works perfectly with the latest vCenter 4.1 U2?

  If I upgrade the hosts ESXi 4.1 4.1 U2, guests VMware tools will need to be upgraded?

  Thank you!

  curtcorwin wrote:

  Hello

  I have 1 host running ESXi 4.1 build 260247.

  Earlier, we add a 2nd machine ESXi for HA.  This means that I have to also run vCenter.  I have vCenter 4.1 build 259021 installed on a computer and have added that the new host to the HA cluster.  It seems to work so far...

  We will not go to vSphere 5 for awhile.

  Questions: Should I run the last vCenter 4.1 U2?

  Bug fixes are likely - good

  The old machines ESXi 4.1 works perfectly with the latest vCenter 4.1 U2?

  Yes!

  If I upgrade the hosts ESXi 4.1 4.1 U2, guests VMware tools will need to be upgraded?

  It would be nice, but is not an absolute requirement.  You can take your time and make it when convinient.

  Thank you!

• Setting up the environment of Applications Dev fusion Jdeveloper - version questions

  I am facing problems regarding the versions of installed packages.
  
  https://blogs.Oracle.com/fadevrel/entry/jdeveloper_and_fusion_applications_explained
  
  The post was very useful. But the expansion of fusion development pack causes problems of version.
  I installed 11.1.1.6.2 Jdeveloper on 32-bit Windows computer. I installed the packages, but four packages are in trouble.
  One of the package is not installed because the minimum version required for oracle.ide (package) is 11.1.1.6.62.98 and existing is 11.1.1.0.11022.xxxxx(I j'ai oublié le nombre). How to get around these problems of version. Unless I have install the fa_dev_bundle.zip, I can't have a role of Fusion application customizations and extensions, right?
  
  To summarize, there are some issues with the versions. Versions are earlier than necessary or there is any required version. How to solve this?
  
  I would be happy if you can point to an another forum/page/documentation that can help me find a solution.
  --
  Harsha

  Harsha049 wrote:
  I would be happy if you can point to an another forum/page/documentation that can help me find a solution.

  Harsha,

  I'm glad you found my blog useful. Have you seen the second part that I just posted a few days ago by chance?

  https://blogs.Oracle.com/fadevrel/entry/jdeveloper_and_fusion_applications_explained1

  It covers installation of all extensions and configuration of the built-in WLS field.

  I hope this helps.

  Oliver
  Fusion applications Developer Relations
  http://blogs.Oracle.com/fadevrel