dc5800 sff: bios dc5800

Similar Questions

• DC7700 SFF BIOS support

  My father has just bought a PC HP Compaq DC7700 SFF (Small Form Factor) used and refurbished and we get an error whenever the computer places.  It reads "BIOS ME Extension stopped Module.  I did some research on Google, and it seems that the error indicates that the BIOS and the BIOS Extension ME are out of sync, which means that their versions do not match.  We are a bit surprised, it was not addressed prior to packaging for resale upward, but nevertheless we are here.  The computer came with Windows 7 Home Premum 64 - Bit.  It is the source of the problems.  Everything I read says to use a BACK program called "FlashBin" to Flash the BIOS with the latest version.  Whenever we try to run the program, it errors saying incompatile architecture (he wants to x 86).  We tried other things is manually creating a BOOT partition on a USB Flash drive and try to run the program to start BACK, but it does not, saying no found BOOTMGR or something.  Another option I found is that the BIOS has a setting called something like "Flash BIOS update" and asked where to find the file. CD-ROM or USB.  When we put on the USB flash utility, BIOS indicates the key USB is corrupted or damaged.  This also happens when we just updated BIOS. BIN file on the USB key with nothing else.

  We are really lost here.  As I said, this is a factory refurbished PC and we would really like to get this annoying error message to go outside every time we start.  Can someone help me please?  Thank you!

  Hello:

  You can read some of the posts offered on reset the cmos on your PC.

  Reset the cmos works the same on the dc7700.

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/me-error-on-Compaq-dc5800/TD-p/940477#.UvFtmemPK9I

  If you want to try the update the ME firmware suggestions, you must use the files to download on the dc7700 under section BIOS support page and I wouldn't update the firmware if you have to do in Windows for the same reason that you would not run an update of the BIOS under Windows.

  I hope that the reset cmos will work for you.

  I have never had this problem on any of my dc7xxx as PC, if unfortunately I won't be able to help you with specific measures to be taken regarding the update the firmware.

• 8200: 8200 of elite sff bios update

  Hi all, I am trying to update the bios with the latest version, I go through the procedure to locate the file, then download the file but when I try to update I get a message saying that the file is damaged or missing ive done this 3 times with the same result, ideas? was soon fred

  Hi, Fred:

  I have the 8200 Elite CMT and I've updated the BIOS year last to v02.28.

  I have no problem with the file, so what I did to you is I zipped to the top and attached the contents of the folder BACK Flash for the update of BIOS below, and here's how you can update the BIOS quickly, safely and easily.

  You can run any operating system you want, because you will not be flashing the BIOS under Windows.

  You will need a USB stick formatted with the FAT32 file system.

  Download and uncompress the file that I attached to his record.

  Copy all the contents of the file in the folder on your USB.  Make sure you get all the files.

  I recommend that you update the BIOS with just keyboard, mouse, monitor and connected flash drive. Nothing else.

  Plug the flash drive into one of the front usb ports.

  Restart the PC and at the beginning of the HP welcome screen, press the ESC key to get the options menu.

  Select the F10 Setup menu to access the BIOS.

  Once in the BIOS, select the file menu.  Then select the system Flash ROM option in the list.

  Now you should see the contents of the file to the flash drive on the screen.

  Follow the instructions to update the BIOS screen.

• GX620 SFF BIOS A11 does support Celeron 450 processors?

  Please accept my most precarious apologies for picking at an old injury; but, I've been upgrading a GX620 SFF and it seems to run hot.

  I discovered that a processor Celeron 450 (LGA755) offers better performance of single-threaded and only has a TDP of 35W. My current Pentium 4 521 has a TDP of 84W. My favorite candidate upgrade to Pentium D 945 has a TDP of 95W.

  I think the Celeron 450 could support my expected uses, light word processing and surfing the web and reduce heat and electric loads.

  Graphics are not a review. Modern web sites have begun an overload of my Radeon HD2400 low-profile video card. So I think to replace it with a Radeon R7-250 to help things move faster.

  I could have built a new system but I just upgraded this SFF for windows 7 and I hope for a free upgrade to Windows 10 when this OS is released. Celeron 450 more Radeon R7-250 for less than $120 against the new system, less than $200.

  Thanks for you help. Past see the post there are really knowledgeable people on this forum

  The specification says Intel® Celeron® D Processor 351
  (Cache 256 KB, 3.20 GHz, 533 MHz FSB)

  90nm 84w

  The 450 are 65 nm and 800 MHZ FSB so no its not work.

• HP DC7700 SFF: DC7700 SFF - No Beep with no ram, CPU hot, Hot, Hot GPU - STATION Chipset NOT

  Hi I have a DC7700 who is not a beep or anything like that and no video display.  I have two we DC7700 SFF BIOS is damaged will need to perform a recovery of the standard BIOS I am guessing Via USB AND BIOS. WPH RIGHT?

  https://www.BIOS-mods.com/BIOS-recovery/Phoenix-BIOS-recovery/

  Try to get the Xeon L5320 at work that I got this message...

  

  In any case DC7700 is not posting the cpu is hot, the northbridge is hot and the gpu gets hot.  Tone post with e6300 with ram.  I have two e6300 and tested both.  It will beep every time if I drill the cover on the lga775 socket, while it is on.  Otherwise, I get beeps...

  Thank you

  T7500 - Dual Xeon X 24 son @ Over 1 terabyte/s
  16 GB Triple Channel DDR3 @ 35 GB/s
  HyperDuo of e/s 1 TB + SSD @ slow b/c of $15 SSD
  GTX 580 @ 900 Mhz @ 43 billion, 200 million pixels per second.

  Thank you very much Sir for your advice, I appreciate it.  Thank you and have a nice day.

  DC7700 has a cpu socket problem where it will blink red and beep if the cpu is not "sitting" remove the processor and replacement in different ways etc will allow it to function normally.  Well that does not support DC7700 Q6600 DC7800 sff motherboard would be in the order of $15 on ebay it fits dc7700 sff chassis.

  * SOLVED *.

  Ended up literally having an empty 2GB FAT16 USB FLASH DRIVE with only the last v116 bin to the root.  Start the PC with the USB in the port before, said flash has successfully and it is up and going again.

• dc5800 SFF: HP dc5800 SFF: firmware Install with new processor Q9400

  I have a HP dc5800 SFF with a core 2 duo dual core cpu. Checking the list of caught CPU supported, I installed a cpu Q9400 supported. Started the machine and got an error in the microcode. Research and found that I needed to download the firmware file that I made this site, the file is called "sp51245.exe."

  How to install this file? The computer does not start, gives just the firmware error. Restore the old CPU to then run the firmware file so I install the Q9400?

  Sorry, that didn't work.

  The only other suggestion I can offer would be updated the BIOS with the latest version.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658095&swItemId=vc_97162_1&swEnvOid=2103

  To update the BIOS, you take a USB flash drive, format it with the FAT32 file system.  Do not make the bootable disc.

  Copy the contents of the file flash BACK found in the BIOS update file (launch the executable and it will open a help page and you can copy the files from this page by clicking on the link there).

  With the flash drive connected in the USB of the PC port boot, press the F10 key to access the BIOS.

  On the file menu, there will be an option ROM Flash System.

  Select this option and follow the instructions on the screen to Flash the BIOS.

  If all goes well, that will remove the microcode update error.

  Just keyboard, mouse, monitor and drive connected to the computer when you Flash the BIOS.

  If that does not clear the error, unfortunately, I won't have any other suggestions for you.

  As you know the processors you tried are taken in charge in the PC and why they don't work, I have no idea.

  For your convenience, I attached the files to update the BIOS below... once again, you unzip the files and copy the contents of the file in the folder in your drive formatted FAT 32.

• HP compaq dc5800 SFF: Trusted Platform Module 1.2

  Hello I have a desktop HP Compaq dc5800 SFF pc. I need driver for Trusted Platform Module 1.2, my hardware is: ACPI\IFX0102 * IFX0102

  Go to Device Manager and click on the device TPM that need the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp40553.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If it isn't, I suggest you to install the latest chipset driver Intel for your PC and if you have not been updated to W7 SP1, do, because as I said, there is no need to install this driver on Vista or W7.

  Here's the latest Intel chipset driver for pc... Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• DC5800 bios update

  I have a HP Compaq originally shipped with XP Pro dc5800 and now has Window 7 Pro.  The reference is AK819AW #ABA.  He has BIOS version 786F2 v01.04 dated 31/01/2008.  I was looking on the HP site for an update of the BIOS for it and found nothing in the section Windows 7.  I found a version of bios Rev 1.59. available in Windows XP and Windows Vista sections.

  If I download the update of the bios of the section of Windows Vista Business 64 bit, it'll work on my pc?  If this is not the case, how update the BIOS on this pc?

  Hello:

  You cannot use the flash in W7 windows-based, but you should be able to update the BIOS by reading the instructions after you download and run the file to put the contents of the DOS based flash on a USB key and update directly from the BIOS.

  That's what I did on my CMT dc7800 which is roughly a dc5800 with a Q35 chipset and an extra drive Bay.

• HP compaq dc5800 sff: install a new graphics card

  Hello

  I bought a 240 r7 radeon graphics card to upgrade my hp dc5800 sff, it is running on the q33 chipset from intel.

  How to install this new graphics card? I want to talk about the installation of the drivers, not the placement in the pc itself.

  I read somewhere that I first need to uninstall the drivers from the chipset, q33 before putting the card in my pc, is it true? If Yes, how should I do it OK?

  If not, can I just put it in the case, plug in my monitor inside and start the pc, then install the drivers from the disk?

  Thank you

  Hello

  It is very rare that the removal of the existing video driver is necessary before installing a new video card. Most video card manufacturers do not understand such a suggestion with instructions to install a new video card.

  However, if you still believe that you must work Yes, so that you can go through the program and features Control Panel to remove the video driver only. You can also use Driversweeper to clean up the video driver.  However, before removing the Chuck, make sure you have the original drivers downloaded to your desktop so that you don't have to hunt for him later if necessary.

  The AMD R7 240 does not yet in your PC according to the level of brand, model and vBIOS in the graphics card.  In addition, check power supply required for the 240 R7 which, from what I've read is 400 watts.

• computer format microtour dc5800: BIOS dc5800 downloads hidden when Windows 7 is selected

  When I visit the download page for the format microtour dc5800, the update of the BIOS is visible if I select one operating system other than Windows 7. I'm sure that it makes the download that is difficult for many people to find. I assume that the latest version of the BIOS (1.59) is compatible with Windows 7.

  Hello:

  I recommend that you Flash the BIOS using the option F10 Flash ROM of system in the BIOS.

  Who uses only the files BACK and you don't need to still be under Windows Update the BIOS.

  If there is no update of the BIOS listed on the support page, that is who runs the Windows based flash method may not be compatible with W7, and there is a significant risk of causing irreparable damage to the PC.

  So yes, the update of the BIOS will work with any system operating, but executed the Windows based Flash utility should be performed only on an operating system supported listed on the download page of the BIOS.

• dc5800 sff computer of office: purchase recovery disc for dc5800 sff system, model KA404UT #ABA

  I am the 2nd owner of computer and appears as former owner had installed a Dell on this HP operating system. would be OK but drive hard contains of disk errors that Windows cannot fix. Leading to intermittent shutdowns and all kinds of fluctuations to get a Win 7 upgrade disk to restart Windows. HP does not sell the RRD more. I'd be willing to pay for the discs, if someone has a set of left.

  Hello:

  Most of the dc5800 comes with Windows Vista Business or Vista Business downgraded to XP Pro, like yours, so HP has never had recovery disc for the dc5800 W7.

  https://h10057.www1.HP.com/ecomcat/hpcatalog/specs/provisioner/05/KA404UT.htm

  You call this number (USA/Canada) to see if HP recovery Vista Business left discs?

  Demand for 64-bit because otherwise you will get 32 bits.

  1-800-334-5144

  If they do not, you can still get a set of this provider not HP - looks like only 32-bit however.

  You can call and ask if they have Vista Business 64-bit games.

  http://www.computersurgeons.com/p-18420-Windows-Vista-business-recovery-kit-gx022av-for-hpcompaq-model-number-dc5800-small-form-factor-PC.aspx

• HP DC5800 SFF PC (NV321UA #ABA) 32-bit

  I was wondering if I could put in the following processor to move to 64-bit:
  
  Intel Core 2 Duo E8600
  
  Also, I have to change the motherboard too? If so, any suggestions?

  Hello:

  All processors in a dc5800 are capable of 64-bit.

  Depending on the number of product for your PC, it comes with the E8400.

  Here are the specs on this Intel processor.

  http://Ark.Intel.com/products/33910/Intel-Core2-Duo-processor-E8400-6M-cache-3_00-GHz-1333-MHz-FSB?q=E8400

  I'm not see many benefits from the E8400 at the E8600 but if you want to, go ahead.

  If you live in the USA/Canada, all you have to do is call HP to this number 1-800-334-5144 and tell the rep you customer service need a set of Vista Business 64-bit recovery disc, and you can install Vista x 64.

  A set of these disks will cost you $10,00

• HP Compaq dc5800 SFF: HP compaq dc5800 format factor windows 7 audio driver

  I received the message in error message "no output device is installed" on the sound icon in the task bar bar.  I don't understand why the driver of HP web page

  https://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3658095 & swLangOid = 8 & swEnvOid = 4052

  does not have the audio driver for the small frame factor dc5800 HP Compac PC company.  I'm of the view that other owners have had the problem of not being able to find a sound driver for this as well.

  The driver can be found here:

  (HD)-Audio-Driver-v.6.10.7255-Re.-A-for-Windows-7-(32-64-bit)-free https://us.driverscollection.com/_47316373665403689ce86efb0a3/download-HP-Compaq-dc5800-ADI-high-definition-

  I've successfully installed on my PC.

• Compaq DC5800 sff: compaq dc5800 small form factor 4 monitors

  My machine is a Compaq dc 5800 small form factor. Running windows 7.

  Wondered what would be the best way to get four monitors to work on this machine. Different programs of 4 separate monitors 4 on each of them, what graphics card should I buyto achieve?

  I have a usb to vga thing that might work for a monitor, so this means that I need a chart of small form factor card that can work 2 or do I need one that will run 3. I read that once you install a graphics card, you can't activate the onboard graphics in the bios. I don't want to have this problem. Please help me.

  Thank you

  Here is the Manual:

  Manual

  You'll need a card video low - profile pci-e x 16. Even if you buy one with 3 outputs as a vga, one dvi and one HDMI usually you can only use 2.

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=7717576 & SRCCODE = WEBGOOPA & scid = scplp698686 & kpid = 7717576 & gclid = Cj0KEQiAiamlBRCgj83PiYm6 - gBEiQArnojDzV29tsehaj_KoZBvaF_tPNYEd-lz4cTMeNrlTNijXoaAjPg8P8HAQ & gclsrc = aw.ds

  And Yes, when you install an add-in pci-e video card, you will lose the integrated graphics card.

  In order to drive the moire than 2 monitors you need a second video card, or a multiple display adapter cable. You have a pci-e available x 1 slot and there is such a thing as a video card pci-e x 1 like this:

  http://www.Matrox.com/graphics/en/products/graphics_cards/m_series/m9120pluslpx1/

  http://www.Newegg.com/product/product.aspx?item=9SIA4UB1J73800

  Some of these x 1 cards actually have a quad cable optionally, you can add the display.

  These are not for gaming but can run extra for things monitors as having walked fellow RSS site or desktop computers more available to work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• PCI Simple Communications Controller driver for HP-Compaq dc5800 SFF

  In the device, other devices shows yellow exclamation with PCI Simple Communications Controller Manager.

  I found a few references to care packs, but none that really meet this model and the OS which is Windows 7 Enterprise 32-bit Edition.

  If you select the download button, it seems that here, the connection cannot connect to the FTP as happens with errors of popup like 425 can't open data connection.

  So two things has driver and is there a http download?

  Thank you

  Paul_Tikkanen wrote:
  

  Hello:

  You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3658082&prodNameId=3658094&swEnvOID=2096&swLang=13&mode=2&taskId=135&swItem=vc-78668-1

  Thanks that solved the problem of missing driver.

  Had to download off site due to firewall blocks FTP. But as an alternative would download flow anyway.