Debugger CVI: cannot read memory

Similar Questions

• error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• After reinstalling Windows XP I get errors saying ' cannot read memory: 0x7e4195cb'.

  Recvd the blue screen of death on my desktop dell (3rd time), could not function in safe mode. Reinstalled Windows XP, put in the product code to be reactivated, obviously could not get to the internet for activation. now get error msg can't read the memory at 0x7e4195cb, click on Cancel to debug, getting same msg of error with different location? I probably wiped out the recovery with the installation of new partition... any help?

  original title: BSOD with new installation

  I hope that you also didn't erase the utility partition. Press F12 immediately after startup to see if she's still there and you can enter. Sure looks like one of your hardware components is bad!

• BlackBerry Smartphones Blackberry Pearl 9105 3 cannot read memory cards

  Hello. I have a bb pearl 9105 prototype that works 100% but he can't read the memory, a CARD MEMORY cards. There a beta OS 5.0.0.925 (bundle 1534), the firmware can be the problem?

  Hello and welcome to the forums!

  Please do not double post your question in several forums.

  You have posted this at 19:09

  http://supportforums.BlackBerry.com/T5/BlackBerry-Pearl/Pearl-3G-9105-doesn-t-read-nemory-cards/m-p/...

  Close this message and we can work on your question in the other thread.

  Thank you

  Bifocals

• Cannot read memory Flash USB UHYB-064GH .avi files

  Hello

  I recently bought a 64 GB of memory Flash Toshiba (stick). This model UHYB-064GH.
  Right out of the box, I plugged the USB on my Windows PC.

  I am running Windows Vista.
  I tried to transfer a number of files video .avi to the device, taking about 10 GB of space.

  I tried to launch files (using VLC player) directly from the flash drive. Most of the files would not play.
  Only to have it but he only played the first 8 seconds of a movie of 2 hours.

  The counter in the corner only showed the film long 8 seconds?
  However, the properties of the file section confirms it was a 1.6 GB, 2 hour movie...?

  I uploaded the same video files to another drive (old) I have and found it worked well.
  The drive is a FAT32 you.

  I don't really know that much about these things would be so grateful for any advice
  Tom

  Try to format it to NTFS USB flash memory.
  Media files up to 4 GB FAT file format, but the NTFS format supports the larger sizes.

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Satellite A20 cannot read SD memory card

  I have a portable Satellite A20. I can read SD cards up to 1 GB. I tried to read a card with 2 GB (and format). It does not work. Who can help me solve this problem? Thanks in advance.

  Post edited by: Rg1957

  Hello

  When the A20 was produced right now on the market, there is no SD card with more than 1 GB of capacity. Much more old models of portable computers cannot read the new SD cards. It is the same on my old Tecra M1.

  I'm afraid there is not much to do.

• my card reader cannot read SDHC cards

  Hey Sony,
  my card on VGC-RB50 reader cannot read SDHC memory card, I need a new firmware for the card reader update, please send it to me, thank you

  the card reader part number is YD-8V06

  Hey Sony,
  my card THAT VGC-RB50 desktop reader can't read SDHC memory card, I need a new firmware for the card reader update, please send it to me, thank you

  the card reader part number is YD-8V06

• error during the installation of SP3 for windows xp-"cannot read or write to database"

  I have windows xp and when I try to install sp3 I get a message saying "cannot read or write from database" and stops the installation.

  How long the machine was not installed SP3?
  (It could be infested/infected/etc.)

  In any case, what I suggest is to prepare the machine for the update...

  • Steps to take before you install Windows XP Service Pack 3
  • Windows XP SP3 - read all the prerequisites for a successful installation

  Chancing some repetative tasks... Maybe just do the following:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * SHOULD * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  Reset.

  Double-click the installation file downloaded in step above and follow the instructions.

• Cannot read the disc for dragon 11, but will read and download dragon 9

  I can install version 9 of Dragon, but when I tried to upgrade to Dragon 11, it wouldn't read the disc of Dragon 11.

  I checked the disk on my laptop, and read 11 Dragon, she could not install the software for cause of memory.

  Hello

  · Another CD/DVD is getting recognized on the computer?

  Here are a few options you can try:

  1. you can download Dragon 11 on the manufacturer's Web site and try to upgrade.

  Link for reference: http://shop.nuance.com/store/nuanceus/DisplayHomePage?resid=Tj5UDQoBAlYAAAT0MkUAAAAD&rests=1312707596649

  2. install the application of the dish:

  a. Insert the Setup on the laptop disk.

  b. start Windows Explorer.

  (c) in Windows Explorer, click to select the drive for the installation disc.

  d. in the Edit menu, click Select all.

  e. in the Edit menu, click on copy.

  f. and paste it into an external USB drive or a USB flash drive.

  g. plug in the drive to the computer where you want to install Dragon 11

  h. on the file menu, point to new, click folder, type Setup 11 Dragon, and then press ENTER.

  i. double-click the folder and then click on paste on the Edit menu.

  j. double-click Setup.exe, and then follow the instructions that appear.

  You can also access: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

• Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  Help, please!

  Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  I previously used the crd of memory and it works ok.  It also displays images must be downloaded but just let me download them.  This is the message I received:

  The following files were not imported because they could not be read. (496)

  So what I did is launching a new catalog that then wiped out all the records and traces of my previous photos!

  You talk of out of the frying pan and into the fire!  Can someone help me with this?  I have an important project to present - I'm Freelancer and looking quite the fool.

  E.

  Your old catalog is still there, use the file-> open the recent item

  The error "cannot be read" indicates that the folder where your photos are to be copied in has no WRITE permission. Change your permissions on this folder.

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• Cannot read file rules

  Hello

  I loaded data successfully on another server with the same data and the same rules file and ceteris parabus the same file / rule fails with. "Cannot read the file rules ' in the error log and"unexpected error Essbase 1007083' on load results screen data.

  I tried refreshing and save the rules file as if it was a problem caused by differences on the original version of the server, it makes no difference, but does not prove that EAS has the right to write rules file in the directory it is more later saying he can't read?

  I was also on the data file with a fine for special characters tooth comb and can't find any problem, AND, as previously noted, the same file load perfectly on another server.

  I've also limited the load file down to a single line to exclude the possibility of this being caused by memory, although the original file is of modest size, a few hundred lines time columns 3, parent / child / alias.

  This is a new installation of Essbase, which does not seem to work correctly, but now that will not seem to load some files.

  I tried to restart Essbase, but the problem remains.

  My version of EAS is 11.1.2.3

  Someone at - it help please?

  Thank you

  Robert.

  Hello

  I found my own difficulty and I'm posting for the recording, so any that come after that run into the same issue...

  Save my rules file for the directory of the Essbase server rather than the file system, ceteris parabus, works perfectly.

  If someone can tell me why I would be interested.

  Kind regards

  Robert.

• How to open coloring that I downloaded to get to the final cut pro with it says: "cannot read the dictionary of the application or extension because it is not scriptable?

  Whenever I try to download the dyes or open, something pops up saying: "Cannot read the dictionary of the application or extension because it is not be scriptable." This has happened and I need to get it resolved. Help, please.

  What are pigments? What file format is it? Cam post you a screenshot of the window of information for it?

• iTunes cannot read the contents of the iPhone "iPhone 6 more»

  Please help because I can not backup my iPhone 6 Plus for my iMac and iTunes asks me to wipe it.

  When I connect the iPhone 6 Plus for the cable of the lightning, he says this: -.

  "iTunes cannot read the contents of the iPhone" IPhone Steve 6 + ".." Select the summary in the iPhone preferences tab and click on restore to restore the iPhone to factory settings. »

  The last back up, I've done was there a little more than 12 months and is an older version of iOS also so if I do a restore of the backup, it will be bad and lacks important information.

  Since then, I upgraded my iMac to El Capitan and updated my iPhone to iOS9.3.2 (just be updated to 9.3.3 now)

  System & software Specs are as follows:

  iMac 27 "V10.11.6 El Capitan (15G 31)

  iTunes V12.4.2.4

  iOS9.3.2

  Any help would be thank you very much.

  Please see the comment by David Lewis21 in this discussion of the CSA. I have not tested its solution, I can't vouch for it, and I have no other information. Try at your own risk. If you don't want to take that risk, I suggest that you contact the Apple Support.