Debugging v1.2 problem Diagnostic tool

Similar Questions

• Diagnostic tool hardware problems on Satellite has detected memory

  Diagnostic tool memory detected in my laptop hardware problems. Now I don't know what part of the hardware's fault.

  Whenever I start my laptop after shoutting it down for some time, it appears failed early and repair takes place and start using the system restore that will come back at some point.

  Is that what this has to do anything with overheating?
  Please help me immediately

  > Diagnostic memory tool detected hardware problems in my laptop. Now I don't know what part of the hardware's fault.

  I would assume memory one or two failures of modules.
  I recommend you to check them both.

  Remove a module and try to use the laptop with a connected module.
  Then another module test. Make it as different memory locations.

  If two modules are corrupt, then you will need to replace both.

• PC Diagnostic tool does not

  Hello world

  I have a satellite M30, and the 'PC Diagnostic tool' utility does not work (nothing happens when I click on the program). I have windows XP service pack 1.

  I uninstalled and downloaded a new site of toshiba, but it still does not work.

  Nobody knows why and how I can solve this problem.

  Thanks in advance for any response.

  And HAPPY NEW YEAR

  Hello

  How do you start the PC Diagnostic tool? Start - PROGRAMS-... or with a shortcut on the desktop?

  Check the shortcut of your link? Click with the right button of the mouse on it, go to properties and check the location of the main file.

  Also, you should check in the C:\programs addressing Explorer PC diagnostics is installed! If you foud it try to start from this destination!

  Try and keep me posted!

  Sam

• Directed here to find a diagnostic tool of performance cooling for my X 205.

  Hello

  I was looking for a software to monitor and control the fans in my X 205. I have an overheating problem when the games. The vents are clear, and I opened the case and he cleaned. The ventilation openings are not blocked. This problem occurred recently. I assumed it was a problem with XP get corrupted, so I reinstalled XP Pro. This did not help. The fan itself works, as I ran it on 5 volts when I opened the file. No problems. He justy lights when the GPU gets hot (75 degrees Celsius).

  A laptop forum referred me to this site and said: I'm looking for a utility called 'Cooling Performance Diagnostic tool', but I can't find anything.

  Anyone know where I can download this utility? I need to monitor and control these fans. I reinstalled the drivers from the Toshiba site and system Toshiba Utilities, but the fan does not seem to be controlled.

  Anyone got any opinions on this one?

  See you soon,.

  Rob

  As far as I know these tools does not exist.
  Maybe someone told you to check in Toshiba power saver settings for cooling method option.

  In any case, I assume you have the laptop model US so I have to redirect you once again. ;)
  Check Toshiba support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp US and look for information on all available tools and utilities.
  You can also visit the forum there, and chat with people who have models of laptop computers in the United States.
  On this page we are discussing in most cases on the European models and the support of Europe.

• Virus in the diagnostic tools on Office file

  Recently, I noticed that my pc guards came and said I had a virus, I did a full scan and it said: I had some viruses, two were in the files and I deleted them, they were related to my norton files because my norton was obsolete, since I installed norton antivirus and it does not pick up my problem.

  On my desk in my toshiba in my diagnostic tool files, one of the files has the virus as my bodyguard of the pc tells me that I opened the page, it's in my files\toshiba\pc cd rom file test.exe diag program don't know if I can delete it will do damage?

  If I can't return the file somehow?
  I think I deleted the file just above her too, as he had the same problem, and cannot test that now that there is no file, help needed please, what would u?

  Hello

  Usually, you can use the System Restore tool to roll back the OS to the beginning.

  But you should always update the antivirus applications as an anti-virus software that are not updated will not help you remove all viruses and will not protect against any virus attack.

  I recommend using additional programs like adware and antispy.

• Said PC Diagnostic tool - network fails

  I ran the Diagnostic PC tool and I got the error in 'Network' and reported as FAILURE.

  I don't know how to fix or diagnose the problem.

  It is with the network driver?

  Thank you

  What's the problem exactly?
  Is there a specific reason to use the PC Diagnostic tool?
  Problems with LAN or WLAn?

• What is the Diagnostic tool?

  When I select "Tools of diagnosis", since the programs/Toshiba/Utilities all what is supposed to happen? I get a circle turning in circles, but never the full screen charge and/or appears.

  Is this normal or should I see a screen that says something like, everything is good and there are no problems? Thank you...

  Hello

  Good explanation here what the diagnostic tool is > http://aps2.toshiba-tro.de/kb0/FAQ5C018S000ER01.htm

  + The key Assist from Toshiba offers easy access to the Diagnostic tool +.
  Try it.

• Diagnostic PC Toshiba tool shows not all components in the Diagnostic tool

  Hello

  I recently had some problems with my Satellite A200 laptop computer screen freezes, do not restart correctly after hibernation and battery warnings displayed even if it is still plugged into the mains to low. When I get battery it will eventually die. I jumped the battery - put new - turned the laptop on - and the battery is at full capacity! Anyway, I've updated the BIOS and I tried to run the diagnostic tool to see if it no problem. Problem is there is that anything posted in the Diagnostics tab to test!

  Any help would be much appreciated.

  Toshiba PC Diagnostic tool is part of the package of added value, so you can try to reinstall VAP.
  You can find on Toshiba support and download page.

  Remove pre-installed VAP, restart your computer and install the latest version of the Toshiba page.

• I hear the ticking in the hard drive, but diagnostic tool (S.M.A.R.T) says his health.

  Pavilion p6010in Desktop for 3 years using (product number: NC875AA #ACJ), for a few months, I hear the ticking in my hard drive, I suspect that it is its failure of hard drive, but my diagnostic tool (SMART) explains his good health.

  Sound indicates a problem. I also use Ubuntu 12.04 with vista (even ubuntu says that the disc is in good health).

  I'm confused why the sound is similar to a click of death as seen in the link (my hard drive Seagate Barracuda 500 GB) below

  Seagate desktop with heads of default drive get stolen, then clicking sound.

  Please tell me what I should do now. I also Plan to upgrade to Windows 8 (I won't use Ubuntu anymore).

  I suggest you replace your hard drive before the upgrade to avoid all these problems. The new hard drive should be the same size or larger that one you have for the recovery discs to work properly. Install Windows 8 on the new hard drive.
  
  Once Windows 8 has been installed successfully make a new set of recovery disc for Windows 8 so that if everything fails, you can the recovery disc restores on Windows 8.

• Equium A60 - error caused by the RAM problem - Windows tool does not work!

  Hi all

  When closing my laptop, I got the blue "screen of death" and it restarts, windows came with this analysis of the accident: "error caused by the memory problem to live: run the Windows tool". I downloaded diagnostic tool (mstinst.exe), he opened so I got "windiag.iso" and he burned on a CD like they told me (the use of 'Record Now') and then I put in the CD drive and rebooted my computer. But it did not launch the tool! Does anyone know why it went wrong and how can I make it work? Even if I got the tool to work, I would be able to solve the problems of RAM anyway, just taking my laptop to a repair center?

  Thanks :)

  Hello

  I put t know if you have seen this page http://oca.microsoft.com/en/windiag.asp but there you can find a detailed explanation of how to use the Windows Memory Diagnostic tool.

  Good luck!

• took a diagnostic tool for this site and it says cd/dvd cannot be read / burn

  Toshiba c660/c660d.i tried to burn a disc for the first time in fourteen months, burner is not not detected.cant read disc.windows empty just continues to put some cant read messge up.when I do a burn list and click on burn I wonder burner, choose a white premiere.1 ran a diagnostic tool for the site and it said unable to read dvd/cd burnt.the this burner in my computer.i can read music on the cd and a ran.just of film does not burn.

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. What is the full and exact error message?

  I suggest to see the link and try to run the fix it:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, please provide more information to help you best.

• What is 5.1.4861.15 hardware diagnostic tools

  What is 5.1.4861.15 hardware diagnostic tools

  Hi Floyd,

  If I am right, it is actually PC-doctor, Inc. Hardware Diagnostic tool which is distributed by some computer program of PC Doctor OEM manufacturers.  The number seems to be a somewhat older version (possibly published with XP systems).  They still do and I have versions for XP, Vista and even Windows 7. If you have upgraded your operating system, the program may or may not work more.  It doesn't seem to be something that you can buy directly (and I don't think that it can be upgraded) - but your computer manufacturer might be able to say more about it.

  Here is the current information on Program OEM's PC Doctor: http://www.pc-doctor.com/pcd_windows.php.  I know that HP and Compaq and Acer and Fujitsu used and can still - and I saw obsolete links and now gone listed this specific version of the program on their systems - but none of their websites discuss the version even if some do not discuss the existence of a program of diagnostics of equipment and how to use it.  Here is an example: If the computer is running XP so that it looks like this (unfortunately not a download link, just info): tests for hardware problems using PC-Doctor - HP Customer Care (United States - English).

  I don't think that it is malware - if I'm wrong.  If your manufacturer says that it was never installed on your computer, so I guess it's possible, but I found only about above it and no mention of all malware related.  In any case, if it was never installed on the system by the manufacturer, then I would probably not use it and may even consider uninstalling just to be on the safe side.  If it has been installed by the manufacturer, try running it to see if it provides you with hardware diagnostic information.  If it crashes or fails to run if you have an operating system upgraded from the original installed OS, then it is probably not compatible and I would just uninstall it as it will be of no use and cannot be upgraded (unless the manufacturer provides one, but it is unlikely) and is just too much room.

  Yet, it can't hurt to run some checks for malicious programs.  Update and run a scan complete with your current AV program.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If they are all come clean and do not show this as a problem, then I would say it is more likely is not malware and don't worry in this regard.

  I hope this helps.

  Good luck!

• Pavilion p6537: 6.0.5418.39 Hardware Diagnostic tools

  After the upgrade to Windows 10, my monthly hardware diagnostic tool did not work. Received a device discovery error suggesting I restart the program or restart my computer. I performed two operations and diagnostic tool still does not work.  Would that be the upgrade of Windows 10 or just a corrupted file?  Never had a problem with this tool before.

  Hello

  Are you referring to the HP Support Assistant?  If so, uninstall the old version via the Control Panel - program and features, and then install the New HP Support Assistant.

• HP - partition left diagnostic tool on delete

  I had problems with my battery and then downloaded and installed the latest version of the diagnostic tool for the material (sp63599). I then followed the instructions from HP for checking the battery (turn off computer; light and ESC to enter the system of diagnosis.) My laptop stops almost immediately!

  So I thought I would uninstall this new tool, but it has not been entered in the programs in the Control Panel, or all programs. I found the new partition, he created and deleted those files, but the score remains and I did too.

  Tech Info: Laptop HP Pavilion g6; B5A04UA #ABA; Windows 7 Home Premium 64 bit.

  Thank you!

  not sure if I get an alert message when answers - hope so!

  UPDATE

  did a system restore, but drive F is always labeled HP tools...

  Hello

  Please visit this tutorial on the use of Microsoft disk management tool.

  Yet once again, a few system partitions can be removed using the method above and you can't sometimes extend a partition if the free space is not located immediately before or after the space allocated, created after the deletion of unwanted partition.

  You may need to use partitioning software when the above conditions are met third-party disk.

  Jaco

• Diagnostic tool memory stops near 40%

  I tied to run my Windows vista memory diagnostic tool and stop about 40%. What's wrong?

  Hello

  1. don't you make changes to the system before the show?

  2. where you try to run the memory diagnostic tool?

  Try the step mentioned in the link below and check if that helps the issue.

  Step: Check memory problems in Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If the diagnostic tool memory stops running or stops, we can try to change the RAM sticks. Could be a faulty RAM.

  Post back with the State.