Default setting on Photosmart 5510

Similar Questions

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Remove a hard drive in Photosmart 5510

  I have a Photosmart 5510 which is broken. I want to recycle, but I heard that it can be a hard disk of the printer which can record personal information. How to remove or destroy the HD before I take it to the recycler?

  Hello

  There is no such drive hard, but if you wish, please restore it to factory settings as follows, from the printer control panel:

  Key setting, then Tools then Restore Factory Defaults (you may need to scroll down to see this option)

  The printer will restart and return to its original settings.

  Kind regards.

• Problem connecting USB to install HP Photosmart 5510 all-in-one inkjet

  Photosmart 5510 all-in-one inkjet

  Windows XP Pro x 86 (32-bit) service pack 3

  Software installs fine until he asking for the type of connection. The computer does not have wireless so I select USB connection and it fails every time. If I select to connect to PC later and plug in the USB, Windows detects new hardware (HP 5510) and asks where to look for drivers. When directed to the installation CD "Invalid data" error when copying files. In the Device Manager in the USB section it lists the Photosmart 5510 with a yellow! Selection of reinstall the driver results in an "impossible to install error.

  There is no other printer currently installed on the computer and the 5510 Photosmart is set as default printer. So far I have;

  tried different usb ports

  tried running the installer from the installation CD

  I tried to download updated drivers

  tried to install with disabled firewall and antivirus

  tried to install it in safe mode

  Same problem occurs every time. Any solutions or suggestions would be greatly appreciated!

  Thank you.

  Finally solved the problem. Had an old Pentium 3 machine around the pose and decided to try to change the disk hard on and see if I could install the printer with a different material.

  It turns out that the mup.sys file, which has something to do with PnP devices, has been damaged and Windows wouldn't start in the other Tower. Then, I took out the HARD drive and put it back in the Dell can reformat Windows XP and guess what, printer installed without a hitch the first time I tried! Now I have to reinstall everything on the computer * sigh *.

  In any case, the printer problem fixed!

• My photosmart 5510 does not scan the pictures correctly on my mac os

  Hello

  Just like the title says, my Photosmart 5510 analysis correctly on my mac. The photo I, m continuous cutting, scanning sends an incomplete picture when I scan photo to file. I did everything positioning of the image anywhere on the scanner in the selection of all the different options to send the photo wireless on my mac. The scanner seems no analysis does not completely. Any ideas? Help, please. '

  Thank you!

  Hello

  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  If you use Mac OS X 10.7 (Lion), make sure to install the critical update below, otherwise skip to the next step:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Now change the settings as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• without the Photosmart 5510 ink cartridges Control Panel cannot be accessed

  I have a Photosmart 5510 which has no ink cartridge. My intention is to use it to scan only, and I would like to be able to set up wireless. When I turn on the printer, the control panel displays this: "problem of ink cartridges.  One or more cartridges appear to be missing or damaged. Install or replace the affected cartridges. »

  The wireless button or the ePrint button cause anything to appear on the control panel and there is no other options, such as cancel or continue.

  Is there a way to go beyond this message of ink cartridges without installing cartridges?

  Hello

  In general, I'm afraid the answer is no, as a multifunction device, it requires the ink required to operate the device but there are of the workarounds you can try.

  That there is a problem with one or more of the ink cartridges should be sorted first, the control panel will not answer while the device is in an error state.

  You try to use the computer temporarily plugging in a USB port on the printer.

  If the printer is recognized by the PC in such a State, let it finish its configuration and open the software HP Photosmart 5510.

  Open the utilities tab and click on Setup & software printer, then click on convert USB to wireless and follow the steps on your PC.

  If this success then run a scan of your PC use.

  If it is not detected, which is likely to be affected by the error status of the device, such you will solve the problem first.

  You can follow these steps to solve a problem of cartridge if necessary:

  http://support.HP.com/us-en/document/c02924284

  Kind regards

  Shlomi

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Not compatible with my photosmart 5510 564 HP cartridges

  Hello

  I have a photosmart 5510 printer I bought at the Japan. It came with a set of 178 cartridges.

  I moved to the Korea and bought a set of new cartridges HP 564 here because 178 cartridges are not available in Korea. In the box of cartridges it is said that the cartridges are adequate for the photosmart 5510.

  After the installation, I get an error "incompatible cartridge".

  If I use sureSupply via the HP utility to find compatible cartridges and I select the Korea as my current position, I get the following message:

  You have selected the following location: Korea

  Is this your current location? We have detected that the cartridges purchased at the location you have selected will not work with your printer. Common causes of this include:

  • you bought your printer in another country
  • you bought your printer on the Internet from a supplier in another country.
  • your printer has been provided by your employer who has moved to another country.
  • you have selected the wrong location on this Web site.

  Your printer can be reset to work in the location you have selected: Korea

  Contact HP support for more information on having your reset printer to work in this place.

  Below that there is a link 'Contact HP for support product' but if I click that I find myself on the sureSupply page and I have to choose my model and location. If I do that, I see a list of 564 cartridges I buy.

  Top of the page, there is a link "Contact HP" but this link (a javascript link) does nothing (in safari on OSX).

  How can I have my printer reset to work in Korea (with 564 cartridges)?

  @ JeroenKorea - if you bought the printer in an area and moved to a new area, you must call customer service to ask a "regionalization Reset." Avoid any accusation to this effect; It is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

  See the document on regionalisation.  I'm sure you already used this link, but I want to offer again.

  http://support.HP.com/us-en/document/c02558798

   

• Photosmart 5510 cartridgelife problems

  I have a Photosmart 5510, using the HP 364 cartridges; Occasionally, it is used as a printer, as I have a mono laser for most goals.  When we bought the printer to the local PC world as a year ago, they also sold us a set of replacement cartirdges - than the normal size, we use so little.

  The original cartridges failed in October, and I replaced the as a whole.  New cartridges are all now showing as empty or very close to being, and the printer is unable to produce green text.  From what I've seen the average lifetime for this cartridge should be 250-300 pages - I'm 100% certain, we have done less than a tenth of that (probably only one twentieth) - which is surely not normal?  The dates of expiration of warranty for cartridges read between 05/13 (Cyan) 07/13 (yellow) 08/13 (Magenta) and 09/13 (Black) - surely that they cannot have all dried up, having all been stored in sealed bags?

  Anyone got any ideas?

  If you have already opened cartridges (ie: tweaked the shipcap) so I recommend to leave it in the printer. Once the printer is power off correctly at the power switch the print head will be capped correctly.

  If you have not opened them, then leave them in their packaging.

  Hope this helps

  Ciara

• photosmart 5510 HK copy problem?

  problem copying HK photosmart 5510.  He can't copy the whole a4 page.  lower part is missing.

  Hello thomasylam.

  Try changing your printer is set up for the country.

  Installation - Set country/region and select a country where A4 is the standard paper format and not letter. Europe / UK should work. Then you might be able to select A4 in the size of the destination for the copy feature.

  See you soon!

• Photosmart 5510: Fill pdf form text only, not print boxes on my Photosmart 5510. How can I include boxes?

  I have downloaded a form of federal Government to fill, typed all the required information in the text boxes, presented in preview the document in the preview application Mac - no problem and print to my HP Photosmart 5510 all-in-one. The output text was fine, but no text box printed. The instructions accompanying the form indicates that the printed application must match the shape exactly that they will treat. The menu for the 5510 doen't show a print or documents and markup box dialog box to check. Any suggestions?

  I decided that the problem was not the printer but the program Apple prediction so I used the laptop HP from my wife to complete the form to fill out and print exactly as it is laid out on the screen. I constantly printing problems between my Mac and the HP printer so I now default to a PC for printing purposes.

• I bought a photosmart 5510 and I'm unable to connect to the internet.

  Hi, I am looking to connect my newly purchased Photosmart 5510 to the internet. I can see that it is connected to the homenetwork, but not the Internet, so I can't use the e-Print. I have a router D - Link DIR-635 B3 without the WPS button (maybe built in). I can't locate any relevant support.

  Logically, I can see that I can't proceed until the Internet recognizes the connection.

  All good ideas what the problem could be,

  '

  Jesper, Copenhagen

  Looks like some of the parameters of the network to the printer is maybe not correct or the ISP DNS servers may have been a problem for ePrint servers.

  Try to set an IP static, as shown in step 6 of this document from HP.  The only change I recommend is what DNS servers are used.  Use auxiliary favorite for DNS 8.8.8.8 and 8.8.4.4 for DNS.  These are Google's public DNS servers, but they tend to work very well with ePrint connection problems.

  Also, make sure that the proxy settings are blank and not controlled.  This is possible access SAP, as indicated in the document, and then go to network > Networking > Proxy Server.  If you receive a certificate warning, select the option that allows you to continue anyway.

  Once the static IP address with Google's DNS servers are defined and the proxy is disabled, try to re-enable web services.

  Let me know what happens.

• How to remove the repetition as a default setting for messages?

  Whenever I have create a new alarm, or ask Siri to set a snooze alarm is activated automatically, which is something really annoying I need to turn it off later. Is it possible to change this default setting, or even to delete the function snooze completely?

  Thank you

  No, you cannot change the default values of the system.  You can propose your idea to Apple at http://www.apple.com/feedback/

• What is the default setting for the homepage of the new tab in firefox?

  My browser has been hijacked, I need to reset and I don't know which is the default setting. I would use the new firefox tab layout.

  See:

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

  The URL of the new tab page is on: newtab

  The build-in home page URL is on: home.

  If there is a problem with the build-in on: home page and then try to reset the search engine used on the subject: homepage.

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the topic: config page and close and restart Firefox to restore the on: default home page.

  • http://KB.mozillazine.org/about:config
  1. Open the topic: config page through the address bar
  2. Type in the filter bar: mstone
  3. Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  4. Close and restart Firefox

  If this did not help, then remove the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the foregoing.