Defective touch controls

Similar Questions

• Touch control stopped working dv7 notebook

  Whenever my laptop is awake mode standby or rebooted, I get a message that "Touch Control has stopped working.  This is a very annoying message that apparently has no real function as SimplePass always work the next time without any problem.

  I did a Hard Reset and Panel to perform a repair on HP SimplePass.

  None of these have solved the problem, and it has not changed.

  Other suggestions for a "fix"would be greatly appreciated."

  The problem is solved thanks to advice from a user to a different thread.

  I had to open HP SimplePass, export my identity as a backup file, and then download a driver for the SimplePass program update.  I found using HP help and Support, had the scan for my machine and configuration system and search for the new driver under the Security section.  The file I used, specific to my machine, has been 'sp63224.exe '.

  He offered two choices: repair and remove also the option buttons.  In the beginning, I chose repair, and this process does not work.  Once I was convinced to have the exported backup, I then used the Remove option, and the update then deleted the old version and install a new one.

  The problem is solved with a new driver.

• Touch control for SX20

  Hello

  Need to buy a touch control of 10 inches for Cisco SX20 (CTS-SX20-PHD4X-K9).

  Wanted to order CTS-CTRL-DVX-10 but dealer is a part replacement No. CTS-CTRL-DV10. According to this link http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-touch/data_sheet_c78-646041.html

  CTS-CTRL-DV10 - confirmed compatible with the second series generation MX300, but mention also takes care of future generations of the SX and MX series.

  In the datasheet SX20 http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-sx20-quick-set/data_sheet_c78-688342.html?referring_site=RE&pos=1&page=http :// www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-touch/data_sheet_c78-646041.html only CTS-CTRL-DVX-10 is indicated as compatible.

  Query: is equivalent to CTS-CTRL-DV10 CTS-CTRL-DVX-10 and it is 100% compatible with the final point SX20?

  Grateful if someone could confirm earlier.

  The SX20 sheet could just be a typo, what your dealer gave you is the correct item.  Note to use the touch 10, the SX20 should be running THIS software.

• Portege M700 screen touch control panel went...

  Hi all

  I was showing off the laptop this weekend and found that the touchscreen doesn't seem to work (I have not used for quite awhile)...

  I went to the control panel to check if it was on and the settings control panel touch has a link that goes nowhere. He lifts just a mistake and the Control Panel icon is now empty.

  Now everything I did updates of drivers is the stuff I have of the Toshiba Tempro thingy... have they remove this feature?

  What could do to break?

  How should I do?

  Thank you much at all.

  Rob.

  Go to the Toshiba website and install the Touch Dual of Wacom driver
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Also update the BIOS and installing the latest Toshiba value added Package (assuming that you use Vista).

  If this does not work, you can try to reinstall Windows by running the recovery (press zero during power on). Don't forget to backup your data first.

• How to get rid of the border of the touch control on the magnifying glass of Windows?

  I need to be able to disable the border touch on the magnifying glass, as seen on the edges of the picture here.

  For some reason any Windows 8 or the integrated Intel GPU not dimensionnera anything on my Tablet (for 640 x 480 games rest in a small box in the middle of the screen rather than stretching to fill most of the screen). Samsung told me it's a Windows 8 delivers so if anyone can help me with there also would be great.

  To work around this problem I was forcing some games in windowed mode, then using the magnifying glass to blow up to an acceptable size.

  It works fine when I use a mouse, but as soon as I start to use the S-pen supplied with my Tablet (Samsung Ativ Smart PC) those annoying borders continue to flow upward, apparently to show me where I can move around the screen magnification. I want that this turned off, there must be a way to do this? Or as preference for completely disable touchscreen navigation of the Magnifier.

  If not, can anyone suggest an alternative Loupe tool that doesn't have these borders around the edges, when I use touch?

  Thanks in advance.

  Edit: Is it not the kind of thing that can be disabled in the registry? I had a quick glance and could see no obvious tactile control don't enable the setting, but maybe someone else has a better idea?

  I also find the boring border.  Very disappointed with the answers.  However, I came across the solution.  With two fingers, a border on each side, tap, hold, and drag inward. This is.

• Defective media control buttons

  The button Mute, CD / DVD button, Play/Pause button, stop button, back button and next button ceased to control the windows media player and continue to be light after stopping down my PC. Turning off lighting to help the HWSetup/Toshiba Toshiba do not turn off the button illumination.

  How can I fix it?

  I don't know if this will help, but try to reinstall only the value-added package.

• HP Pavilion 17 f040us touch: Control Panel audio Beats disappeared

  don't know what happened but beats the audio control panel disappeared it rom my notebook. How can I get that back. Beats is also missing from the music hp app, would support like that also. Help

  Hello

  Download and reinstall the Realtek HD Audio software at the following link - this should also reinstall the heartbeat gui.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69618.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• DV7 3105ea:touch controls such as volume control, turning power switch connection Wi - Fi stopped working

  My laptop is dv7-3105ea. The buttons above the keyboard touch and just below the screen has stopped working. Could someone please? Thank you.

  Try a hard reset, works sometimes. Disconnect all external devices first.
  
  battery and power cord 1 / removal
  
  2 - Press the power button for 30 seconds
  
  3 reinstall only the power cord for the first start.
  
  4. turn on

• HP 5510 defective touch

  Upgrade PC to a new running windows 8.1. Tried to connect the wireless 5510, but parts of the touchscreen do not work. Wireless pressed and it displays no 'connected', tap Settings and nothing happens. It seems that there is "dead" on the touch screen areas. I have since connected by USB cable, but a window said some features not available through USB, only by wireless. Any suggestions, or do I need a new printer?

  Thanks again for your comments. I'm in Australia, and the warranty expired June this year. The online store, I bought does not seem to exist anymore, so I'll live with it for now and replace it later in the year where I run out of cartridges. As the printer is on my desk next to a window, I wondered if the sunlight could have damaged the touchscreen. I'll make sure that the following is not so much sun to be on the safe side. Please mark as resolved.

• HP Compaq 6910p touch controls no longer works...

  I installed windows 7 Home Premium 32 and also installed Snow Transformation Pack 1.5. I have used and deleted some kind of buttons 1, 2, 3, 4. I did not restore point before using it. Now, I want to use the original Windows 7 without additional extensions. Everything is almost OK except touch buttons. The volume upward, the volume and mute no longer works. When I touch the buttons, they are light, but without result.

  Can someone help me with this kind of problem. Is how to configure these touch buttons (enabled/disabled)?

  That you have a solution, but I have to say that it did not help me.

  I found a solution of forum in notebookreview.com. Very simple solution:

  "Shut down the computer, unplug the adapter, remove the battery and hold the POWER button for about 45 seconds, THEN reinsert the dough and all and start the computer" and it helped!

  Hopefully it helps someone else too...

• "" Cisco ASA multiple defects remote control let users deny Service and bypass the security controls ".

  Recently we have heard people talk of "Cisco ASA several flaws let users deny remote Service and bypass the security controls" under the securitytracker. However, as everyone knew, ASA 8.3 need a lot more resources on ASA HW to run. I checked that the bugs associated to above problem "CSCtg69742, CSCth36592, CSCtg61810, CSCte53635, CSCte46460, CSCte20030, CSCtf29867, CSCte14901, CSCsz80777, CSCsz36816" in the Cisco Bug Toolkit. None of them show any information if there is a fix for ASA 8.2 (x).

  This means that Cisco starts to stop supporting 8.2 (x) and to push customers to their "so-called" best image 8.3 version (x) as a strategy of "marketing?

  Cisco is best to find a solution for this problem on 8.2 (x) rather than push customers to something Cisco "love." It may not be the best interest of the customers AT ALL. Instead of pushing customers to ASA 8.3 (x), Cisco likely to push customers to its big competitor Juniper:)

  Sean,

  I did a quick search on the Bug Toolkit for CSCtg69742 and found the following result.

  Fixed in
  8.2 (3)
  8.3 (1.5)
  8.3 (2)
  8.2 (2.15)
  8.2 (2.107)
  100,7 (0.17) M
  100.5 (5.16) M
  8.3 (1,100)
  100.7 (6.1) M
  8.4 (0.99)

  This was posted in the column on the left side of the search results page.

  I recommend you research each ID of Bug Bug Toolkit (http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs) for the version name (number) that contains the fix for this bug.

  HTH

  Amol

• Satellite C855 - defective touch 'U' on the keyboard

  Hello

  Don't know if it's the good forurm - feel free to move it if so.
  It's all in the title. The U key no longer works.
  I ran osk.exe have on-screen keyboard and the key worked.
  Don't know how/why not.

  I have Windows 7.

  Thank you
  Ben

  > It's all in the title. The U key no longer works.

  Simple solution: you need to replace the internal keyboard because the keys/buttons simple cannot be replaced.

  Another option: you need to use the external USB keyboard.

• Can someone help me to assign touch controls to lights and media player

  Hello

  Please can someone assign me the first two keys to turn lights on or off and open windows media player?

  Someone said that if I go into Toshiba Assist - optimize - Support Button Toshiba I can do here, but how? Anyone know?

  See you soon.

  If please don t post twice on the same theme and follow the first thread you created:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=41600&TSTART=0

• my cursor is always jumping around. I tried a suggestion on by clicking on start, then touch control, equipment, etc., and the cursor is always jumping around. Do you have more suggestions.

  my laptop is a Dell inspiron with vista.

  my laptop is a Dell inspiron with vista.

  Youi are probably brush your hand against the touchpad while typing. Or be more careful or buy a mouse and disable the touchpad.

• Can not stop window which says my "touch control doesn't work" from popping up when I turn on my computer

  This window opens whenever I turn on my computer.    This issue or the feature is not spoil me on what I can tell, but the window is a nuisance and I would like to solve this problem.  Please notify.

  Thank you for your response.   My laptop is HP 2000, win.7, Premium family edition.

  I have not solved my problem with the continious pop-up window shows which

  My TouchControl does not work.

  I clicked on the link drop in this window called details and found a

  Version number for TouchControl.   Then I went to programs (86) and began to

  through programs and when I arrived at the Simple collar, I discovered that

  He had the same version number.   I had never used Pass Simple which I think

  is a program of online identity protection when buying things.  So, I went to

  My Contol Panel and uninstalled Simple past.   I rebooted and my problem

  went.

  I know that my method was professional, but it worked.   Before I

  uninstalled Pass Simple I did a search online and found that, if you have never

  He used then would be the own uninstaller, but if you used it so you can

  very well have problems buying items online at these Web sites where you were

  using Simple passage.   In any case, thanks again.   I guess that I'll be back one day with

  something else!, :) k