Dell Inspiron touch does not

Similar Questions

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• (Redirected) Dell Inspiron N5110 does not start

  Hi, my laptop Dell Inspiron N5110 is now 3 years old. I recently had a hard drive fail, then replaced by a new. Now the machine does not start. I have a boot disk in the DVD player that swirls, but gets no further. I get also is no longer the screen Dell displays (before the windows one). In fact, everything is empty. I tried to remove the power supply by battery pack and power holding down the button for 1 minute then re - again no difference. Is there anything else I can do or is the death machine?

  Thank you

  Daniel.

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Dell Inspiron 17R does not recognize the cd/dvd drive

  I have a laptop Dell Inspiron 17R and sometimes it does not recognize the cd/dvd drive!

  I tried to update the drivers with the system after the update, Dell detects the cd/dvd drive appeared in my computer and in Device Manager, but after 20 minutes, there was no. Any suggestions how to solve this problem?

  Thanks in advance!

  Hello

  See if that helps you.

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• Dell Inspiron Touchpad does not turn off

  I've been through everything, and it seems that there is no real help available for this problem.  I bought a Dell Inspiron 5050 in August 2012.  Updated November 7 to Windows 8 and I hated typing since (which is unfortunate, because I'm a student who wrote many papers) because since the installation of Windows 8, the toggle switch that disables the touchpad no longer works.  Not only that, but even without touching the keyboard, the cursor jumps around and I find myself correcting the text at least 1 to 2 times per line (Yes, by writing this, I already had to solve four, making five, errors).

  I spent more than 2.5 hours on the line then a tech controlled my computer remotely (I got another problem solved) and he could not understand either.  There IS NO option to disable the touchpad in the Control Panel, or change the settings for sensitivity.  I tried to uninstall the driver, and it did not work.  Currently, I have a big piece of cardboard glued on the touchpad, and which has not helped at all.  I HATE Windows 8 because of this whole fiasco (and I tell everyone I know about the many problems I've had so far).

  Maybe this isn't even the problem of Microsoft, but the answers tech with insulting tones kindergarden instructions don't WORK, then please do not give me one.  If you can't tell, I'm more annoyed and I wish that I had NEVER been updated to Windows 8!

  If someone gives me a USEFUL answer, I'd be happy and stop to say Facebook, Twitter and everyone I know face-to-face how I HATE Windows 8!

  Thank you!

  Search the Trackpad in the start screen and open the settings tab.  Then open the settings file.  Make sure the tapping is checked.  Click it and then click on the gear at the end of the line (you must pass your cursor over the line of tapping to get the equipment).  Make sure the Double tap to toggle the TouchPad is checked.  Click to close this window and OK on the first window.  See if the double tap works now.

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• Why my Dell Inspiron laptop does not recognize my charger?

  Hello

  I have a Dell Inspiron 1545 and I have never changed or got a new charger, but now, for some reason, whenever I turn on my laptop, I get an error message saying that it cannot identify the power of my charger and therefore will be not my laptop. I tried different outlets, the whole and I even run diagnostics on my computer as he recommended, and he finds no problems.
  Is there something I can do that wouldn't force me to buy a new charger?

  Hi BrittanyCarr,

  It seems like the problem of material, to support more specialized on this issue, please contact your computer manufacturer.

  Dell support

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen

  You can see the article below

  Solve battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

• Dell Inspiron N5110 does not support Windows 10?

  I'll try once more to make this post to cause the previous, it never went live.

  I have a 3 years old Dell Inspiron N5110 i5 / 8GB ram/Nvidia/Win 7 home premium and I am very pleased with his performance and build quality. Yesterday, I tried to book a copy of Windows 10 and after struggling to make the pop icon in my taskbar, I managed to get it jump.

  When I clicked the Get Windows 10 icon to get the reserve he came with this message...

  

  "BIOS is not supported.

  I have 2 laptops more than 2-3 years older than my N5110 and both are qualified and reserved for the update...

  I'm running the newest BIOS A11, all updates windows and the most recent drivers for this machine and wanted to ask you:

  Is it me or other users of N5110 this message?

  Any other update BIOS I is missing to get sound to work?

  Dell will solve this problem, until July 29 and when Windows 10 go live?

  A formal response or if there is an official link to Dell for this question would be appreciated.

  Just update your BIOS to A11, waiting for some time (a few hours or a day) and everything will be Ok.

  It works but not supported by Dell.

  Thanks to you all.

• Dell Inspiron N5110 does not start

  Hello!

  I went to dell [F12] startup options and ran the diags.

  It throws following error message upward:

  Error code: 2000-0145

  Validation: 45371

  MSG: Hard drive 0 s/N 5VEKQY27, self test has not completed.

  [HD bios is detected correctly].

  What should I do now?

  You will need to replace the hard drive - which, while a bit expensive component to replace, is not easy to access on this model.  You can watch the video below before you decide to replace it yourself - or do a workshop work for you.

  You will need a new 2.5 "7-9.5 mm laptop SATA hard drive (hybrid or or drive solid state drive).

  www.YouTube.com/watch

• My Dell Inspiron 1564 does not detect my TOSHIBA e-STUDIO desktop printer 452 connected via LAN

  When I'm at the office, I connect the printer to the office via LAN.

  I am not able to print any document directly from my laptop even if my local network connection is direct and functional.

  Hello

  I reloaded the printer driver and tried to use the LAN printer and it worked. Many thanks for the suggestions.

  Vincent

• New Dell Inspiron 3847 does not illuminate

  I just bought an Inspiron 3847 Friday. What I did is to make updates, install firefox, installed a game and when I wake up today to turn it on it lights. I disconnected the electrical surge protecter, plugged in the wall and still nothing. I was looking online for 2 hours on what to do and im a loss. I have to go back to the store, or is there something else to do for this problem? Thanks for any help

  sarcasticmama

  I just bought an Inspiron 3847 Friday. What I did is to make updates, install firefox, installed a game and when I wake up today to turn it on it lights. I disconnected the electrical surge protecter, plugged in the wall and still nothing. I was looking online for 2 hours on what to do and im a loss. I have to go back to the store, or is there something else to do for this problem? Thanks for any help

  sarcasticmama

  As the 3847 bought two days earlier, better to return to the store for a refund or a replacement.

  Bev.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• iPod touch does not present as associated device

  My iPod 5th generation touch does not appear on my list of device associated with my Apple account.  How I "associate"?

  Just where are you looking?

  You use the same ID and the device uses one of these characteristics?

  On the devices associated with

  When you use some features of the iTunes Store on your iPhone, iPad, iPod touch, or computer, your computer or iOS device is automatically associated to your Apple ID in iTunes account settings. These features include:

  • Turn on iCloud music library.
  • Download after purchase , you did in the iTunes Store, App Store, iBooks Store or Mac App Store.
  • Enabling automatic downloads.
  • Turn on sharing of family.
  • Subscribe to iTunes game.

  View and delete devices in iTunes - Apple Support

• After updating my iPhone to ios 9.3 iPhone touch does not

  HI guys! I'm too frustrated by the question. I'm updating my iOS to 9.3 (Build 13E233) on my 6-64 GB iPhone (model A-1586) and now I can't even use 10% of my phone. My touch screen works not even taping 100 times but if I press the lock and unlock my phone, my touch screen works very well for a few seconds then freezes while on the other hand all other keys work well while the touch is blocked (for example, Home, Power, Volume buttons) and I know my phone is not stuck but only touch does not. I'm too worried because I can't use my phone even for one moment what to do any help? Any help will be appreciated sorry for my bad English. Following that I

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/