Dell Open manage Essentials shows a wrong server instead

Similar Questions

• Download Open manage Essentials V1.1

  Hello

  Anyone know where I can download Dell Open manage Essentials version 1.1?  I tried to download it from the following link but it constantly fails, application seems to be corrupted.

  https://marketing.Dell.com/DTC/OME-software

  I searched on the web and this seems to be a common problem.

  Kind regards

  Stavros08

  Hello, Stavros,

  Try to download from this site using these credentials: http://dtxdropbox.dell.com

  Login name: ome1_1

  Password: lfsxkffq

  Kind regards

• Dell Open Manage - application compatibility

  Hello

  First post here. I work for a large company and I am the 'rookie' of the service infrastructure. The company I represent have about 500 sites which about 85% have installed Dell Power Edge 310 servers. We seek to deploy Dell Open manage through the estate to monitor the performance of the server etc etc. I had to know if we could use it on other server brands, such as Fujitsu, HP and IBM.  In our data center, we use HP servers.

  So my question is could we use Dell manage open on other servers from manufacturers? And we could use it with the ILO? I know other programs of management software for the likes of HP etc etc, but as you can see I am, to say the least, a bit out of my depth.

  Any help/advice/guidance would be greatly appreciated.

  Thanks in advance.

  No, OMSA works on Dell supported running OS servers.  In other words, that it will work on:

  • non-Dell servers
  • If other computers (including Dell)
  • Servers not made Dell supported operating systems (client OS (XP, V, 7, 8), including the lack of Service Packs)

• failure to update bundle Dell Open manage offline after the ESXi 4.0 upgrade to ESXi 4.1

  Hi all

  My service manage Open Dell failed on my Dell Power Edge Server after the upgrade to ESXi 4.0 to ESXi 4.1. I know that I need to update the bundle off line Dell manage open to a newer version to run on ESXi 4.1. However, everything I did on updating bundle Dell Open manage, it just gave me the below error:

  C:\temp\2 > "c:\Program Files (x 86) \VMware\VMware vSphere CLI\bin\vihostupdate.pl"-Server 172.16.3.28-i b OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX40i_A00.9.zip

  Enter the user name: root

  Enter the password:

  Please wait install the fix is underway...

  No ballots or VIB were found in the metadata. No bulletin for this dish

  form could be found. Nothing to do.

  I know that the command is correct I can install correctly the Bundle open offline manage a FRESH ESXI 4.1 Installation on a test server. However, I do not want to and cannot start early on my production server. An idea to work around this problem is especially welcome!

  There is an another vib for ESXi 4.1.  Try to install OMSA go http://ftp.dell.com/sysman/OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX41i_A00.8.zip.

• Foglight and Dell Open Manager Application to monitor temperatures

  I would like to know how I would be able to use Foglight to monitor Dell servers.

  For example I'd like to monitor the temperature. These servers have Dell Open Manager installed on then. Can use/get Foglight all alerts to Dell Open manager?

  You can use the SNMP integration to monitor traps HW via Foglight.  Check out this post for a primer http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19552981.aspx

• Getting started with Open manage the essential problem of Server Data Sources

  I installed a server for and with Open Manage Server Essentials... discovered my network and found a lot of good servers... 1 server has a green check mark and you can see in the Data Source, it uses the administrator of the server with the Version 7.1.0. I downloaded the OMSA node in 7.4.0.2 on another server, etc. SNMP installed and the server is located with a gray question mark and the data source is an Agent of Version 2.0 of Windows Hardware... is anyone has any advice how to handle? And want to install server after the server to see it in OME centrally on a single management server...

  Sorry for my bad English and thanks for all the info.

  Thomas

  OK, so make sure you check out the first installation tutorial in the console of the OME.

  1. you must on the box, so 7.4 OMSA's fine.

  2. be sure that you did the necessary SNMP parameters in the box of the OMSA (services.msc, SNMP, accept any host paackets - or use the ip address).

  3. you can use the tool for troubleshooting Dell desktop OME to test SNMP connectivity to the server with OMSA on it.

  4. I think that the FAQ (delltechcenter.com/ome) contains some tips in the discovery section (3.4)?

  That should make us started.

  Thank you

  Rob

• Reference Dell Open manage for PE2950 for WS2012R2

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  I know it's there because I installed it in the last company I did part of the management, but for the life of me, only two years later, I can not understand where we got the original installation to do this.

  I downloaded installed three or four to manage open on the page drivers for our service number, but one of them came with "[I'm just a patch]" and the other three have indicated that they were not compatible. Even if we set the operating system to Windows Server 2012 R2, it always gives me "for 32-bit node,' then maybe we're missing something else.

  I am hoping to win the lottery here and have a Dell technician take pity on me and direct me to a FTP location I can give to my manager so that we can get this software down to all the systems in our network.

  I can't be the only person who has faced this issue, but I may be the only person who was not able to fix it on their own.

  Help, please.

  daveepperson86

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  Fake. You will find it at support.Dell.com, select your system, change the selection in the drop-down list of OS, then check out managing systems for OpenManage Server Administrator (Managed Node). The 32-bit version is fine and installation of WoW 64-bit operating systems will be activated (all except the ' core' by default).

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V1JDD

  You can also go to http://ftp.dell.com.

• VMA 5.0 install Dell open manage

  Hi all

  I try to install OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip on my ESX with vSphere Management Assistant, and I have the following error:

  VI-admin@localhost:~ > esxcli - Server ESX_IP software install d OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02 vib.
  Enter the user name: root
  Enter the password:
  [MetadataDownloadError]
  Unable to download zip:/var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip?index.xml deposit, skippi index.xml /var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip: [Errno 2] no such file or directory: '
  URL = zip:/var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip?index.xml
  Please see the log file for more details.

  can someone help me?

  Thank you.

  Try following the steps below.

  1. log in at the VMAs with privileges and the administrator rights.
  2. copy the file OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip in the folder/var/log/vmware on the server ESXi5.0.
  3. turn off all comments on the ESXi host operating systems and run the ESXi host in maintenance mode.
  4. in vMA, run the following command:
  esxcli - Server software vib install d/var/log/vmware /
  5. type the username root and the password of the ESXi host when you are prompted. The output of the command shows a successful update.
  6. restart the ESXi host system.

  Ref (http://support.dell.com/support/edocs/software/svradmin/65_02/ESXi_ts/esxi5_ts.pdf)

• Dell Repository Manager Server Update Utility (SUU) plug-ins do not install

  Hello..

  I am trying to create a USB for my filing of server Dell SUU and whenever I'm trying to export my package, it says:

  "The required plugin is not found."

  "Click here to install the plugin.

  I click on the link to install and it starts to download SUU_720.cab (240MB) (the have done a few time now) file and confirms that it has been downloaded successfully. But as soon as I click on finish, it will pop up with an error saying:

  "SUU directory creation failed with error, SUU plugin is not available.

  Although I just downloaded and installed the plugin!

  And checked the cab file exists: C:\Users\***\AppData\Local\RepositoryManager\Payloads

  I have attached a few screenshots below to show what I mean.

  Any help is very appreciated!

  Thank you

  Screenshot 1: download of Plugin:

  

  Screenshot 2: download Confirmation:

  Screenshot 3: complete the Export Wizard

  

  Screenshot 3: summary of export:

  screenshot 4: error:

  

  
  

  
  

  
  

  Hello Traoré

  What version do you use? If you're not in version 1.5 so I recommend the update to her.

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/1767.Dell-Repository-Manager.aspx

  The ACR 7.2 just came out a few days ago, and this is the first I've heard of this issue. If we find that there is a compatibility issue with a specific version of the repository Manager, or a problem with the cab itself, then I'll let our development team to know. Please let me know the version you are using.

  Thank you

• Task Manager Win7 showing wrong memory values in the process bar

  I've been running Windows 7 64 bit Home Premium for quite some time now (2 years or more) and I have not encountered any serious problems. But recently my task manager started showing some strange values for all processes in the list. She says that explorer.exe is using a maximum of 65 k, which is the highest value compared to others except for firefox, which rises to 130 kb. I searched all kinds of forums and couldn't find answers. It is not a serious problem, but it makes it very difficult to know when a game or a program uses to much memory.

  I don't know exactly what card to set up here. But here are some of the most important, that if all goes well, it is not my hardware.

  OS: Microsoft Windows 7 Home Premium (6.1.7601 SP1 Build 7601)
  Processor: Intel Core i7 - 2600 k CPU @ 3.40 GHz
  RAM: 8 GB of DDR3 memory (I don't remember the exact manufacturer)

  I hope someone can help me
  -Rasmus.

  According the information that you have provided, I don't see anything unusual.

  My explorer.exe and IE9 using the same amount of memory (private beach).

  Edit: 25/10/2013 - after reviewing your original question, I realize, my answer was incorrect.

  The values must be higher.  See the last post by Emil Prager.

  I apologize for my control.

• Manager tasks shows only 4 graphics on the performance tab when it should display 8 for 3770 K & Win7 x 64

  When I open the performance tab of Task Manager I see that 4 graphs (showing the CPU core activity) instead of the 8 that I would see with a 4 core with hyper-threading processor. I have unplugged and plugged into the CPU 8 power connector pins several times and once I could see 8 graphics for about an hour until what he returned to only 4. Since then, I don't me 8 graphics no matter what I do. I replaced the MB, CPU, memory and power separately, but he never makes no difference.

  My father has a Dell with a 3770 and his task as managing only shows 4 graphics.

  I have an Asus P8Z77 - V Pro MB, i7 - 3770K, 16 GB Corsair Memory (2x8GB) CL9, PSU Corsair HX850 gold and Win 7Pro x 64. My father has a Dell with the same processor, but different everything (he has Win 7 HP x 64).

  4 graphics that appear are for 2 cores with hyperthreading. I can tell because Aida64 says only 2 hearts are running. I also only 4 graphics with the ASUS AI Suite 2 program.

  Windows is set to mode performance and no power saving features are enabled in Windows or the UEFI.

  Can someone tell me what is happening? How can I get 8 graphics is displayed all the time?

  Thank you

  Bruce

  Hi Bruce,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/threads

  Hope this information helps.

• Open manage - can be used on a cluster NIC.

  The subject is a little weird and don't know where to put it, but here's the situation.

  I have a Power edge 515. I have two GB NIC.

  I noticed on my a hostname called idrac-1SNMFP1 DHCP server.  I have never see this before. It was just sort of. I ping and it comes back on the network with an ip address of 10.1.0.55 and his life.

  I searched and found that idrac stands for "integrated dell remote access controller".

  OK, so I'm going on my dell servers and "10.1.0.55 ping - t" on a single computer carefully start cables nw on the servers where I can for a second or two. I see that one of the servers is indeed the IP address.  I can enter the lcd screen and see that this is the ip address of this server maintenance port.

  I have implemented open manage on that server. Here are my questions?

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Hello col288

  col288

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  I do not know. I have something suspicious about your environment or configuration has changed.

  col288

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  You can change from the iDRAC via CTL E BIOS when starting, via the web interface of iDRAC, or using the racadm within the operating system commands. http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3205.racadm-command-line-interface-for-DRAC.aspx

  col288

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  It is because this IP address is not local to the operating system. Port 1311 is an IPMI communication port to access the iDRAC. You can use any IP address assigned to the operating system, a loopback address or a host name of the system with the designation of port 1311 and should communicate to the iDRAC via IPMI. The 10.1.0.55 address IP is not local to the operating system, so it's off to your network, then he's looking for. IDRAC is not accessible via the port 1311 connections remotely. This port is only available locally. If you use https://10.1.0.55 it should display the web page for the iDRAC.

  col288

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Teaming has nothing to do with it. Collection is managed by the driver and the operating system. It has its own dedicated port iDRAC IP address (10.1.0.55) is on a port shared with one of the LAN on motherboards. If it is shared among the LOM are partitioned so that the bandwidth is dedicated to iDRAC. If you bought the add-on from the company and have iDRAC set dedicated mode then it uses its own network interface. The port of iDRAC has a symbol of a key on it.

  Thank you

• Windows cannot find c: /? / Download/Dell - Webcam - Manager

  I tried to download dell webcam Manager but it shows error windows can not find c: program? / Download/Dell - Webcam - Manager

  I'm not able to install any new program, it shows the same error message.please help

  Hi Sandra, appriou

  Thanks for posting your question in the Microsoft community

  After the description of the question, I understand that you are not able to install any program. I'll be happy to help you on this question.

  1. what operating system is installed on the computer?
  2. What is the accurate and complete error message you get?
  3. don't you make changes to the computer before the show?

  Let us try the following methods.

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest to perform the clean boot and then try to install.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  After trying the steps above suggested, giving us the results. If you are able to solve the problem. or know us additional troubleshooting results.

• I enter the wrong server name, how can I change it?

  I downloaded the program to send videos by e-mail, I entered the wrong server name how can I change it?

  I downloaded the program to send videos by e-mail, I entered the wrong server name how can I change it?

  ====================================
  I assume you mean Windows Live Mail?

  Try to open Windows Live Mail and go...
  Tools / accounts / select (highlight) the account in question / properties button / tab server...

• Using Open manage replace Raid 5 HD

  Everyone,

  I must say first that I'm not a person of software.  However, no one in my company has no experience in the Raid arrays, despite having inherited several systems.  I apologize if my questions and follow-ups are unclear.  I turn a little in the darkest of time.

  I have a Server System 2003 with a Raid 5 array.  One of my hard drives die on me.  I had two identical disks removed from another computer with its own table.

  Using Open manage, I stumbled my way through to get the foreign configuration off this drive and have even allowed.  Now, it's ready state, with the rest of the degraded Raid.  I went to the Virtual Drive section.  For this record, I expect something like rebuild or reconfigure the table or something like that.  Here are the options I see:

  Delete

  Re-branded/decommission dedicated rescue

  Blink

  Unblink

  Change of name

  Change policy

  Replace the drive Member

  My question is, how to make the table to add this record and they start using it?  I want to get the table and running and the degraded state.  I thought it was hot, so should I just pull out and push again?

  Sorry to be a fool this inexperienced.  Any help would be appreciated.  Unfortunately, I was a little thrown to the Wolves of my group on this one.

  Thank you

  Hello.

  It was OK for you to clear the foreign configuration in order to get rid of existing metadata on the drive. Under the selection of available tasks. Assign as dedicated hot spare disk. This will allow the drive to rebuild the table. You can monitor the progress of the reconstruction in the OpenManage Server Administrator (OMSA).