Dell PowerEdge 1950 fuori co - sostituzione controller SAS [MS]

Similar Questions

• (Redirected) Dell poweredge 1950

  I have a dell poweredge 1950 server that was given to my school and I am trying to install windows server 2003 on it, but an error saying:

  Setup did not find any hard drives installed in your computer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running

  How can I fix?

  I also tried to boot Ubuntu from a usb key and that no longer works.

  I also said to update BIOS or Flash the Bios but I don't know how to do and do not know if that'll fix it.

  I want to just get to the top and running, it can be Ubuntu or windows everything is easier.

  Any help would be greatly appreciated

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• map of scsi (redirect) dell poweredge 1950

  Hello world

  I installed and running a Dell poweredge 1950 that I use it to backup (tape) using Backup EXEC 2014. In the alley, he has an empty slot for a SCSI expansion card where a need can connect via a SCSI connection a different external tape drive. Due to the fact that the dell model is quite old, it is difficult to find a type of card.

  I found online something to my request: [View:www.xbyte.com/ProductDesc.aspx]

  but the problem is that it has two SCSI ports and it is too big to get it. I tried to find one with a single port, but I can't seem to find it. Have you also had this problem and if so where you bought the SCSI expansion? There is also the option to purchase a SCSI cable / USB, but I don't want to go with this solution. All advice what to do or where to buy expansion card I need.

  Thanks for the tips.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• The lamp indicator yellow LED on Dell PowerEdge 1950

  Hello

  You asked me to "remove" the warnings of several Dell PowerEdge 1950 LED amber.

  I looked at the LED and was unable to 'remove' the warning using the controls on the LED display on the front the 1950s.

  How this is done?

  Thank you.

  Hello

  If the error is not active then you can get rid of the clear amber of the erasure of the journal of material. You can either start to the BMC to clear the or use one of our management as OpenManage Server Administrator utilities.

  Thank you

• OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

  As I said earlier:

  OK, I am trying to install vSpere on my Dell PowerEdge 1950.

  Hardware specifications:

  4 GB FB-DIMM DDR2 memory

  x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

  There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

  Drive hard WD 1 TB, it's the one I use for the VD.

  When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

  He says that it cannot install it on a virtual drive? My server is not compatible?

  Edit: There is another error that says: cannot read the partition table for device:

  /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

  What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

  Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

• Sostituzione Player DVD in a Dell PowerEdge 2900 fuori co

  Con sistema di disco fare L'immagine del Clonezilla, mi sono che people wanting it player del DVD server (player usato) solo in fase di sommergibili del sistema no Spannplatte, led che blinka furiosamente e spingendo ripetutamente it looping di espulsione he carried CD non esce.

  I wanted sapere che tipo di player e e che tipo di interfaccia ha (sata?) in modo da sostituirlo per poter fare L'immagine del sistema.

  Grazie

  Fausto Bolognesi

  Salve,

  nel PE 2900 esistono versioni, verificare should both it sul P/N player. Ha una quotazione by una sostituzione di need?

  Grazie

  E.C.

• Dell PowerEdge 1950 BMC help!

  Hello

  I thought that the server takes a long time to start. I hooked up to a monitor and found that the BMC was having a "communications failure". I found also that the DRAC5 installed on the server was not working. I scoured the forums and I read the update from the BMC would solve this problem. I have 2012 R2 server installed on this system, so I downloaded the 2.50 for the BMC update (.) (EXE) and started to install it, fans crawls up to maximum speed and then I got a BSOD when the server restarts the PERC6 now cannot see my 2 TB drive that windows (SATA) installed, he can see the 300 GB SAS drive.

  Is it possible to get my 2 TB hdd working again and to get the BMC to work?

  Thank you

  Hardware and software failures occur. May not have been avoided. However:

  You might have been able to reflash the firmware BMC (unless it is completely unresponsive or nonfunctional).

  You may have attempted to clear the system NVRAM.

  As far as the reader goes. It is very important to learn the difference between CLEAR and IMPORT and when to use one or the other.

  Finally, consumer/desktop/computer portable readers should not be used in servers. WD Green, blue and Red are all bad choices for use on RAID of company systems.

• Request preventivo sostituzione card mother server Dell PowerEdge R610

  Buongiorno,

  Abbiamo need di UN preventivo per sostituzione card mother relative al server Dell PowerEdge R610 fuori co Service Tag GGFN25J.

  Restiamo in attesa di una vs cortese risposta.

  Todas

  Alberto Daponte

  IBN Savio Srl

  Buongiorno, the sto contattando via e-mail.

• PowerEdge 1950 SAS 5 / i maximum capacity of hard drive?

  Hi guys,.

  I am planning on getting an upgrade on one of our PowerEdge 1950 servers which has the SAS 5 / i controller.

  Currently as 1 x 80 GB SATA II drive and 1 x 250 GB SATA II hard drive.

  The upgrade, I'm eager to replace the 250 GB SATA II with a 2 TB SATA II drive so we can merge our cluster of stale data (Intel Celeron D 3, 06GHz) and our well-built used 1950 together to save power and room on our grid, while making access much faster data.

  Because the Cluster consists of 1 x 1 TB Drive and 1 x 500 GB drive, it would be impractical to pop just readers to the 1950s as two disks approaching their capacity. They also get a bit now with the 1 TB drive with a warning sector re-appropriated in SMART County (we received as a replacement for factory refurbished for a new brand doesn't have a disk of 1 TB in December 09).

  Are the questions I would ask: what is the maximum capacity hard drive SAS 5 / I controller can accept and: what is the combined total capacity of the hard drive?

  Obviously with the latest firmware of the controller (hence the reason why I request in a new thread).

  Thanks for your answers,

  Chris

  If it is a disk 2 (3.5 ") 1950: 2x2TB storage = 4 TB of total disk; 0 = 4 can be used to RAID, RAID 1 = 2 TB usable.

  If it is a 4 drive (2.5 ") 1950: 4x1TB storage = 4 TB of total disk; RAID 0 = 4 TB usable, usable 10 RAID = 2 TB, RAID 5 = 3 TB usable 2xRAID 1 = 2x1To can be used.

  I guarantee you that it refers to the total disk space of all disks included with the machine in the sale.

  A single disc (not the total of all disks in RAID array) can not be greater than 2 TB on any of the controllers supported for a 1950 (SAS PERC 5/6, 5/6).

• PowerEdge 1950 problems

  I have a dell poweredge 1950 I am trying to load windows 2003 server on but keeps telling me that Setup not found not disks.i downloaded the controller driver on the site of lsi and copied on a diskette disk.i pressing f6 during installation of the OS and tried to install the driver from a floppy external drive.but usb system do you want mtp lsi supported stuff and I press S to mean yes he loads the driver but continues to get back to the page where it asks if I want to load support.what should I do? someone help pls

  
  

• (Redirected) Card SCSI Dell poweredge 1951 backlane

  Hello world

  I installed and running a Dell poweredge 1950 that I use it to backup (tape) using Backup EXEC 2014. In the alley, he has an empty slot for a SCSI expansion card where a need can connect via a SCSI connection a different external tape drive. Due to the fact that the dell model is quite old, it is difficult to find a type of card.

  I found online something to my request: [View:www.amazon.co.uk/.../ref=sr_1_fkmr1_2]

  but the problem is that it has two SCSI ports and it is too big to get it. I tried to find one with a single port, but I can't seem to find it. Have you also had this problem and if so where you bought the SCSI expansion? There is also the option to purchase a SCSI cable / USB, but I don't want to go with this solution. All advice what to do or where to buy expansion card I need.

  Thanks for the tips.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• [Solved] Dell PowerEdge R720: Error when will United Nations datastore in VMware ESXI 5.1.0 [SD]

  Buonasera,
  HO a Dell PowerEdge R720 fuori co, build 799733, non riesco ad add a datastore not found da dipped 1.8 to.
  Durante FICS 'add a storage' seleziono disk/Lun, VMFS5, per poi was "Current Disposition of the disc" al, nella casella vedo the con dei locali brain table a couple of partizioni di default.
  Dopo few minuto di attesa mostra una finestra in cui VSphere loses the e outdo if sta tentando di ricollegare.
  Can I try a ricollegarmi senza esito, dopo some UNAMET outdo e di nuovo attiva

  This is the che viene say error:
  Call "HostDatastoreSystem.QueryVmfsDatastoreCreateOptions" of object "ha-datastoresystem" on ESXi '10.2.99.36' failed.

  He guardando Dell Disco local delle partizioni noto:
  1 XXX DatastoresAndVolumnes.PartitionType.0xde not found...
  2 Win95 FAT32 LBA 2.00 GB

  No Yes di cosa is... If my alla fine ho need understand di causa e come lo spazio image Add.
  Allégo ibm_db del disco inquisito: naa.6848f690edfa310018e37ce915ef3fcf

  Come posso lo senza riavviare storage server add it?
  The partizioni in questioned are best-known boot di durante FICS? Oppure posso eliminarle?
  CI sono dei comandi specifici per creare he vmfs volume?

  Grazie in pre-empted by it vostro aiuto

  Salve,

  No we can aiutarla a software level. It forum dedicated to e a soli problemi hardware.

  If dovra rivolgere o al supporto Vmware o a terze aziende.

  Speaking saluti

• PowerEdge 1950 refuses to update BIOS

  I'll have a chance update the BIOS of a Dell Poweredge 1950. The vehicle currently has BIOS version installed 2.4.5. I get "BIOS Update Failed" when restarting.

  I tried to install 2.7.0 and then tried 2.6.1 when it does not work. I also tried to open a command windows server 2012 R2 and using the/force command prompt when you run the BIOS update. That no longer works.

  Any help?

  If the splash screen is custom, so it is an oem card, try a file from here: www.dell.com/.../DriversDetails. Starts = 2731115761 & osCode = WW1 & productCode = oth-1950 & languageCode = en & categoryId = BI

• PowerEdge 1950 II PCI Riser

  Hello

  I have a Dell PowerEdge 1950 genII.

  But he holds a riser PCI64,

  And I saw on various forums that it could be replaced by a riser PCI - Ex.

  With the REF: FP332

  I bought the riser to see that it in fact does not at all...

  The connector must be reversed in fact to make it work/adjustment.

  -That someone had a sollution or compatible PN

  Riser (new)

  Reference Dell PN: CN-0FP332-69702-85 a-0410

  Rev: A00

  Server:

  Dell PowerEdge 1950 II

  ST:

  Old riser (full)

  Reference Dell PN: CN-0J9065-69702-76Т-1164

  Rev: A01

  Old riser (length hakf)

  Reference Dell PN: CN-0J7554-69702-775-1347

  Rev: A01

  If you need more info,

  Let me know

  Hello

  MOHdennisNL

  With the REF: FP332

  I bought the riser to see that it in fact does not at all...

  The connector must be reversed in fact to make it work/adjustment.

  -That someone had a sollution or compatible PN

  Riser (new)

  Reference Dell PN: CN-0FP332-69702-85 a-0410

  It is the side map for location of built-in storage. If you forced into the slot for the Center or the mounting left then you may have damaged the slot.

  MOHdennisNL

  Old riser (full)

  Reference Dell PN: CN-0J9065-69702-76Т-1164

  Rev: A01

  Old riser (length hakf)

  Reference Dell PN: CN-0J7554-69702-775-1347

  J9065 and J7554 are the center of PCI-X and the left risers. The Center and the left lift PCI - e are the numbers J7846 and JH879. You might find them listed under the different reference numbers as well. We have generally several numbers for the same part.

  Thank you

• PowerEdge 1900 perc 5 / I controller battery replacement

  I have a replacement battery message in the Application to manage Open Dell for a Dell PowerEdge 1900 Perc 5 / i controller. If I replace the battery I lose the current RAID configuration? Also all the procedures available for the replacement of the battery?

  Thank you

  Jeff Hicks

  Here is a link to the manual, page 92 will give you the steps to replace the battery: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-1900_Owner%27s%20Manual_en-us.pdf

  Your RAID configuration is stored on the discs. Turn the power off and replace the battery, then start back. Upon request, accept the configuration of readers and move forward.

  Kind regards