Dell precision t7500 dual processor compatibility.
Hi, I have a Precision t7500, currently with a single Xeon e5620 @ 2.4 ghz Quad core 12 MB of cache. With 32 GB 2x16gb 10600 sticks of RAM. I just bought a 2nd processor, Board Assembly, heat sink and fan. Can I use one of the sticks of ram in each processor card? Also, could I use a combination of different processors? That would be an improvement recommended along the coast the Xeon E5620?
Thank you very much.
Edit - P.s. A new installation of windows is necessary?
Read pages 17-19 in the Manual on the installation of RAM on the motherboard and riser for the dual CPU configuration.
Unfortunately, 32 GB of RAM is not a configuration supported with two processors, even if it is compatible with a single CPU configuration. So, you may need to purchase at least 2 x 8 GB of additional RAM to run two processors.
And note RAM must be double rank (DR) for use with two processors.
Complicated...!
Tags: Dell Desktop
Similar Questions
-
I have a Dell Precision T7500 with two processors, Xeon, 48GB of RAM, and recently I bought a PCI card captures Elgato HD60 Pro for streaming play.
Whenever the card is inserted, I see an error saying to start (after the Dell logo and before Windows loads):
"22/00/0: Error allocating I/O BAR for PCI device.
I have 2 other PCI cards, which I removed and also tried to install the Elgato map on the other 2 slots, but the problem only goes away when the Elgato card is NOT installed.
Any ideas?
This is not a dell product.
Error allocating I/O BAR for PCI device
strike F1 to retry boot, F2 for Setup utility
The PCI-E bus is version 1.1, but your card is version 2.1
http://Ark.Intel.com/products/36783/Intel-5520-IO-hub
Your Xeon processors are not listed as the min spec core I5 3 rd Gen.
There is no solution for this its the same reason that OLD maps sound and TV Tuner cards also do not work in the latest and most recent machines.
For PCI and PCIe devices, a BAR is a Base address register which is used by the BIOS or the OS to tell the device door on what looks to match its memory resources in. Most of the PCI devices in your system requires a certain amount of memory space, and the BIOS tries to adapt all inferior to 4 GB for compatibility with 32-bit operating systems.
-
Dell Precision T7500 hangs at BIOS on reboot
Hello
My Dell Precision T7500 hangs after that screen "search for devices to HBA 0..." tells me that ROM is installed successfully. Thank for nothing. It just hangs.
I tried to restart, open the SAS configuration - there only one option, tried the F1 setup - this does allow me to enter any choice (so no diagnosis, etc.).
It started when I rebooted my system Ubuntu 13.04 after the installation of updates.
Any ideas?
Thank you
Ant
Hi chubbant,
Try resetting the CMOS battery.
Now try to boot in the BIOS. Restart the computer and press F2 on Dell logo. Under the heading "Disks" disable the SAS controller. Now click on 'Apply' and get out.
If the steps above does not work, move the hard drive to a SATA optical and 1 to SATA2.
The link above, click on manual and the Documentation Service Manual.
Before opening the chassis, I recommend you to unplug the power cable, press and hold the power button for a few seconds and release evacuate residual electricity.
Note: Open the chasy, if you are uncomfortable doing.
* NOTE: Please ensure that the power cable from the computer is disconnected before opening the chassis. Refer to the service manual for assistance to remove or replace the internal components of the computer.
Waiting for your answer!
-
Howdy,
I have a DELL Precision T7500 with an eSata connector on the rear of the machine - all my existing SAS and SATA ports on the motherboard are taken and I want to connect an external SATA drive. How to get power to the drive?
Is there a map that I can buy. I have PCI, PCI - X, 2 slots available on the motherboard PCI Express.
Should I consider that meanders on a power cable 4 wires from inside the machine?
Thanks in advance. :)
Greetings MakesOwnWeather,
Thank you for your question.
You need to use what we call a 'hard drive enclosure. What is the physical size of the hard drive external that you want to use? 2.5 inches? 3.5 inches?
The device draws power eSATA or USB below don't ports so no need of an additional power cable. He receives only 2.5-inch disks.
http://Accessories.Dell.com/SNA/ProductDetail.aspx?c=CA&l=en&s=DHS&CS=cadhs1&SKU=a3018200
-
Precision T7500 boot problem after BIOS update
Hi eveyone,
I've recently updated the a15 BIOS on my Dell Precision T7500 machine and now when it starts, it tries to start for a few seconds, then stops. He did this 10 times and the number 3 and 4 are on the machine. Everyone recognizes this problem?
Win 7 64 bit Service pack 1, 6 GB of RAM, recently updated the BIOS A09
Thanks in advance
KWA-1,
3 + 4 = suspends to RAM Windows fallback status
You can start in safe mode and disable all options sleep/hibernate?
-
Dell Precision 390, processors who work for an upgrade?
We have two Dell Precision 390. One with the Conroe E6300 and one with the Pentium 4 631, variety of Cedar Mill.
We want to upgrade the P4 to something better.
We have a lying here Q6600 processor, and an old Pentium D 830 dual core CPU, but it's be better performer than one heart P4.
Are the same motherboards in these two 390 s? I think that our E6300 could be improved to a Q6600, but the 390 with the P4, I'm not sure. They are all two socket 775. We already have the necessary correct heatpipe radiator for more hot processors.
Thank you
I got the info from Dell today. There are two motherboards used in the 390. We support the line Cedar Mill and Conroe CPU. The other motherboard for 390 supports the Q6600, QX6700 and QX6800.
-
Dell Precision 490 CPU Upgrade
Hello
My Dell Precision 490 currently runs 2 x Intel Xeon 5130 (Woodcrest) 771 socket LBA. The Intel Xeon 5160 next would be compatible with my system. My mobo is ODT031 / 5000 X of Chipset / 6321ESB Southbridge.
Server Intel Xeon 5160 3.0 GHz dual core Socket 771 CPU SL9RT 4 M/1333 64 - bit
Type of CPU / microprocessor
Server market segment
Family Intel Xeon 5100
Model number? 5160
CPU HH80556KJ0804M reference numbers are a microprocessor tray/OEM
BX805565160A is a microprocessor in a box
BX805565160P is a microprocessor in a box
Frequency? 3000 MHz
The bus speed? 1333 MHz
Clock multiplier? 9
The package 771-land Flip - Chip Land Grid Array (FC-LGA6)
1.48 "x 1.48" (3.75 x 3.75 cm)
Socket Socket 771 (LGA771)
Introduction date 26 June 2006
Price at introduction $851S-spec numbers
Production processors of'RE / QS
Part number QLUF QOXI QTII QXQT SL9RT PLATE SLAG9
BX805565160A +++
BX805565160P +++
HH80556KJ0804M +++Architecture / Microarchitecture
Core microarchitecture
Bensley Platform
Cranberry Lake
Glidewell
Core processor? Woodcrest
Review of basic? B0 (QLUF)
B1 (QOXI)
B2 (QTII, SL9RT, SLABS)
G0 (QXQT, SLAG9)
CPUIDs 6F6 (SL9RT, SLABS)
6FB (QXQT, SLAG9)
0.065 micron manufacturing process
Data width 64-bit
The number of cores 2
The number of threads 2
Floating Point Unit integrated
Level 1 cache size? 2 x 32 KB instruction caches
data cache 2 x 32 KB
Level 2 cache size? 4 MB of shared cache
Multiprocessing up to 2 processors
With MMX technology
SSE
SSE2
SSE3
Extended Memory 64 technology (EM64T)?
Virtualization technology?
Execute disable bit?
Power mode low features HALT
Extended halt mode
Stop grant mode?
Enhanced SpeedStep technology?Thermal/electrical parameters
Nucleus of V? 1V - 1, 5V (B2 Stepping)
0.85V - 1, 5V (G0 stepping)
Minimum/Maximum operating temperature? 5 ° C - 56.5 ° C (B2 Stepping)
5 ° C - 60.7 ° C (B2 Stepping)
5 ° C to 65 ° C (G0 Stepping)
Maximum power dissipation? 130.83 watt
104,84 watt (continued)
Thermal design power? 65 wattNotes on Intel HH80556KJ0804M
The bus frequency is 333 MHz. Because the processor uses Quad bus Data Rate effective bus speed is 1333 MHz
Part BX805565160A includes 3U + active / passive thermal solution 1U
Part BX805565160P includes the 2U passive thermal solutionI tried an Intel x 5365 and it remains as a CPU not supported. I'm under revision of BIOS A08. There is sauce more involved magic, such as a general release BIOS rev no?
-
Additional memory for Dell Precision M4600
Hello people, I need your help once more, my laptop is a Dell Precision M4600, come without webcam, dvd - rom, 2 x 2 GB ram, without fingerprint reader, intel core i5 - 2540M, the memory of two banks in the lower side works fine, two banks of memory under the keyboard come covered, I removed the cover and try to use , but when put memory in this Bank, the laptop does not work, power on but not the video, the witness of hard drive and wifi is turned on and battery is flashing. I am doing wrong?
Thank you in advance.
Daniel.Hi Daniel,.
Precision M4600 memory configuration is based on the processor. All 4 memory (DIMM) slots will work if the computer has Intel Core i7 Quad Core or i7 Quad Extreme processors.
Only 2 slots DIMM will work in configurations with processors Intel Core i5 or i7 Dual Core. Because your computer has processor i5 - 2540M, only the primary DIMM slots (bottom) can be used.
Please come back for any clarification.
-
I want to upgrade my 32 bit OS 390 dell precision to 64 bits OS
I want to upgrade my 32 bit OS 390 dell precision to 64 bits OS
Original title: upgrade of 390 dell precision
Unless you can find the product that is not manufactured, your choices are limited to Windows 7 and Windows 8.
Compatibility of your hardware and software research first...
Windows 7: http://www.microsoft.com/en-gb/download/details.aspx?id=20
Windows 8: http://windows.microsoft.com/en-gb/windows-8/upgrade-to-windows-8
Tricky
-
Dell Precision 7710 with NVIDIA Quadro M5000M problems with 3D WPF content
I have a
Dell Precision 7710
6920HQ-i7 CPU @ 2.9 GHz
32 GB of Ram
Windows 7 Pro Sp1
NVIDIA Quadro M5000M 369.49 driver version
I bought an upgrade for my
M6700 Precision
Our company has developed and uses software that uses WPF to render 3D content in a XBAP in Internet Explorer. When I try to use it on the 7710, 3D content flickers when it is redrawn, makes it almost unusable. The stats we can get our application, we can see that time of update for refreshment / current is about 45ms, while on most of the other PC, even those using the integrated Intel graphics card, typically 12ms.
We used this software on a large number of PC without feeling anything as bad, which is obviously quite disappointing because the laptop should be able to view we want to hassle.
As far as I can tell all our drivers for everything on this laptop are up-to-date.
We tried using the NVIDIA Control Panel to force the laptop to use the High Performance Nvidia Quadro rather than the graphics card integrated card and it seems to be made while we were able to do, it shows the icon in the taskbar notification and which showed that IE was using the Nvidia.
I tried tweaking pretty much all other settings I can think / see.
I tried to use the Dell Precision optimizer to select different profiles with no luck. The Dell Precision optimizer seems not really demonstrate the use of the GPU processor or any other stats to see with the GPU, which seems odd to me.
I ran Diagnostics on the laptop available on the Dell support site.
I searched the net and found a few examples of problems with Nvidia and WPF cards, but none of these things that we found seems to apply to our application. We have desktop computers at the office where he works well with other Nvidia cards / best of all.
In addition, the fan on the 7710 will quite difficult sometimes - hard that I expect. I tweaked the power settings to move less, but it always seems to run the fan more that I think it should / would appear on my M6700 - or maybe it's just a fan of stronger.
So I wonder:
If anyone out there has experienced something similar? If so, any suggestions on how to fix or things to try would be greatly appreciated.
Thank you
We solved the problem by making changes in our application software. We still don't seem to be able to reach the same FPS as for the other GPU, which should be similar, but we're working on that also. Perhaps because we are trying to run the application at 4K. If anyone has a similar laptop and can provide details on the 3D graphics performance using any software comparative analysis, it would be great if they could share for comparison.
-
The Dell Precision T7600 CPU temperature and fan speed
Hi all
I recently got a Dell Precision T7600 workstation that has two processors Xeon E5-2620. I checked the specifications of Intel and the maximum temperature for these processors apparently is 77.4 C.
However, when you run fairly intensive applications that can last a few days or so to analyze, I noticed that the CPU temperatures get much hotter than this no difference in the speed of the fan. I used speedfan and CPUID to check the temperature/fan speed. The highest I've seen the temperature was 90 c and the fan speed has been only 900 RPM. He regularly sits on 70 c and still no response from the fans.
I find this a little hard to believe given that surely fans should be a little lower than 90 c action! I checked the settings of the bios (version A05) and the fan speed control is on auto. I have also run the diagnostics and it reported no problem. The fans run, but I'm not convinced that is the speed controller!
Is this normal?
I managed to re - install the A10 bios (it appeared to include a few things my already installed version is not ).
Anyway, tried to launch a number of things to keep the processor at 100% for a few hours. It seems that the fan speed changes now and the maximum temperature of the processor, I was able to get (and briefly) was 72 C. He had served mainly the mid to high 60s with fan speeds ranging between ~ 1000 - 1500 rpm, as required to keep it there.
I would say that the new BIOS has solved my problem.
-
Dell Precision M90 Windows 7 upgratde &; 2nd HD questions
Hi all
I have dell precision M90 for over a year now, I bought it with the following configuration:
2.33 GHz processor
4 GB OF RAM
NVIDIA Quardor 2500
150 GB HD
the machine is a mazing, but lately, I decided to upgrade to windows 7 and I have two main issues between them.
has made a success improve two windows 7 with M90 cause I checked on the Internet and I see a lot of contradicting the opinions about it!
The second question concerns the storage, 150 GB is already not much with windows XP and all my installed software, so I am really worried about space during the installation of windows 7. I thought to add a second drive, but looks like a long process, the removal of pay media and obtaining a cradle for the new drive. that is not sold where I am currently. Is there is another way to install a second drive, if this is not the case, would you advice guys of the evolution of the lintierly in a car with the largest one, keeping in mind that the only ones I can find on the market is at 5400 RPM and 7200 rpm the the one I currently have is?
If you suggestions on the correct action would be really appreciated...
Hi all
Update our Crucial M90 with FX 2500 M with a hard drive CT250BX100SSD1 250 GB solid state and hospitality Windows 10 x 64. Challenge was to find video drivers. After several attempts and a lot of research, I found this info. Extract the CAB file, went to Device Manager and update driver underlined in the extracted folder of CAB and video driver was updated and works! All FX 1500 M, FX 2500 M and FX 3500 M are supported for 32-bit and 64-bit and earlier versions of Windows.
Impressive update Windows 10 and SSD brings the M90 about 10-15 sec.
forums.Guru3D.com/showthread.php; highlight = quadro + 2500 m
New graphics drivers NVIDIA from Microsoft Update have been posted! These packages include the file NV_WHQL.inf, which includes the native support for all computers desktop and mobile GeForce 6, 7, 8, 9, 100, 200, 300 and 400 series GPU (and Quadro equivalents).
* Note: These packages of drivers do not include an HDMI audio driver, or contain PhysX System Software. Use WHQL v258.96 drivers for the last certified HDMI audio driver and visit www.nvidia.com/.../physx_system_software.html for the latest version of the PhysX System your
259.47 version is the first version observed to add support for the mainstream GeForce 400 series!
Reference Dell M90 Quadro FX 2500M
Windows Vista / Windows 7 x 86 (32 bit): download.windowsupdate.com/ms...c43d908c63.cab
Windows Vista / Windows 7 x 64 (64-bit): download.windowsupdate.com/ms...acec9c13b7.cab -
Docking station for Dell Precision 7510
I have Dell communities very recently joined after I buy the laptop Dell Precision 7510. It's a great product so far, but I want something better. I want more ports. A cradle to go with it is the obvious solution.
What is the best laptop computer Dell Precision 7510-compatible docking station? My specific needs/setup:
-2 external screens (D - sub / HDMI, or for £50 in addition, connection I get display-port), screens may be more in the future
-internet cable high speed
headphone/microphone
-Sockets USB for mouse, keyboard, printer, scanner, external hard drives, etc.
I presume that the Advanced E-port replicator is the best/most appropriate. I just want to be sure of that, because my laptop model (7510 precision) is still very new and not all information everywhere put on compatibility. I don't want to make a costly mistake. I travel and will not be able to "return" the products I buy.
Yes. I contacted Dell sales... service and they told me that the Dell E-Port Plus II is compatible with my 7510 accuracy. After written confirmation, I advanced and bought a British supplier on Amazon for £100... but he came in a suspicious package and did not work well, and the adapter was the size of a brick (literally). I went back to Amazon... and tried my luck with Amazon Germany. You can get the original product on their part for about 140 euros, and it works perfectly. The link to the product:
http://www.Amazon.co.UK/GP/product/B00A8ESOVA?PSC=1&redirect=true&ref_=od_aui_detailpages00
(it's actually UK, now that I check it... it's that I bought and it's good)
Basically, Dell has not updated its compatibility information yet. The docking station is listed in the check-out for precision 7510, but does not say specifically that it is compatible with this model. I had similar problems elsewhere too, as I want to install LoJack on my laptop, but can not find information about the question to know if my laptop model is supported by what is called the 'persistence technology' in the BIOS (which makes it impossible to uninstall LoJack even if you change hard drives).
-
Display of nervousness on Dell Precision M4500
My Dell Precision began jumping and shaking quickly. She continues to do in BIOS mode.
I'm in dual boot Ubuntu/Windows 8 if that helps
It works when it is turned off for long periods of time (4-5 hours), but after some time starts again a jig
Thanks for any help you can give me
Confirmed motherboard problem
-
I have a Dell Precision M90 laptop and recently upgraded to Vista 32 bit to 64 bit Windows 7. Everything worked perfectly, except for my display drivers. Windows 7 installed a driver called Standard VGA Graphics Adapter. This driver has a very low resolutions only and cannot deal with games or same Aero.
I had an experience with updated video drivers with Vista. My graphics card is a NVIDIA Quadro FX 2500 M. When I had Vista there is no Vista compatible driver for this card, so I used the Geforce 7900GTX driver (which is inspired by the FX 2500 M) and it worked fine. Of course, the Quadro FX 2500 M doesn't have a driver compatible windows 7.
I downloaded the driver for the 64 - bit Windows 7 Geforce 7 series so I could upgrade and use, however when I used the NVIDIA installer it says that my computer has no compatible hardware for this driver (I tried to install it in Vista compatibility as well). I tried to force the upgrade by using the option "have disk" and choosing the .inf directly file. This did not always and said that he could not work because "the selected driver for this device does not support this version of Windows" even if it is the version of Windows 7.
I also tried to start my computer in safe mode, uninstall the VGA Standard driver and then install the driver NVIDIA, but it does not work either.
Sorry for the long post, I just wanted to add as much information as possible I hope to solve this problem. Thank you for taking a look and thanks for your suggestions!
Fixed! Finally! Dell.com took the pilot... but the link that they had posted on the page of Precision M90 was mislabeled. I tried another way, found the good pilot, and got, it works. Solved the days and days of frusturation.
Maybe you are looking for
-
Are temporary or permanent bans? Ask someone I know. Thanks for your help.
-
Stuck with the location of the store, help!
My store of the App Store is defined in India because I was looking for a game and he said that it was not available in the United States. Stupidly, I clicked on change store. Now, I can't change it because I have $0,25 USD.
-
FN + F6/F7 do not work on satellite L755D-11W
Hello I reinstalled the system, now, I have win 7 Home Basic (64-bit)All Fn functions work fine, but - combinations of keys (Fn + F6/F7) does not work.I wonder, what to do, I want this funtion to work. He is not comfortable when my screen have always
-
LabVIEW. Write an equation within a formula node
How I would write this equation chl = (4.9467 * mv)-0.3239 inside a formula node? Thank you
-
How to separate data in 'several Information.vi tone "?
NOTE: I have another post on this subject. Here is the link.----------------------------------------------------------------------------------- My ultimate goal is to get/display of the frequency at which the peaks that passes. I've used different me