Design of authentication issues and wireless security

Similar Questions

• RE: router wrt310n - need help for configuring wireless security

  I can get wireless if the router is not secure, but cannot configure wpa and wireless security.  Instructions followed on linksys tutorial but still connect wirelessly if I select wpa security.   In addition, I can't find a way to change the ssid, the pages of router do not match documentation.  The version of my router is v1.  Is this obsolete, I know that there is a v2.  Any help will be appreciated.

  Please follow these steps to configure the wireless settings and try to connect to the wireless network.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  IF YOU ARE NOT ABLE TO CONNECT TO THE RADIO

• I want to change your security questions and do not know the old issues and thank you

  I want to change your security questions and do not know the old issues and thank you

  If you have an emergency email address you can use to reset your questions. This option of rescue should be on https://id.apple.com after connection and asked for security issues. If this is not leading to a solution, call Apple: Apple for support and service - Apple Support Contact

  Be prepared to identify you as the account holder. They will ask you some things, I can't predict what, but usually the serial numbers or credit card.

• Wireless security

  I bought a Premium of 8600 OfficeJet and overall, the printer is great.  I have significant concerns about the implementation of security in wireless connectivity.  Are there plans to support WPA2?  In my opinion, this is important and should be implemented.  WPA and TKIP were broken were important.  I would also say that car, (CCMP) AES and TKIP provided so users cannot enable TKIP.  I can control it on my access point.

  Some printer manufacturers did a great job of keeping up with the latest security protocols wireless, probably due to issues of cost or thought that a printer as a target is not valid.  As these devices become more sophisticated, they provide more tools to be used to compromise other hosts on the network, that is breaking into the printer, then after the target.  Please keep safety at the forefront of the design of the printer wireless.  I use HP at home and my employer has hundreds of HP printers and servers.

  bimmmmmer wrote:

  Some printer manufacturers did a great job of keeping up with the latest security protocols wireless, probably due to issues of cost or thought that a printer as a target is not valid.  As these devices become more sophisticated, they provide more tools to be used to compromise other hosts on the network, that is breaking into the printer, then after the target.  Please keep safety at the forefront of the design of the printer wireless.  I use HP at home and my employer has hundreds of HP printers and servers.

  bimmmmmer:

  On this point, I can assure you that here at HP, we spend a lot of time and effort to try everything you describe before these printers go to market. In fact it is part of my job here at HP everyday.  Depending on your class of device HP offers varrying levels of security and ways to secure your device.  Printing of consumer devices generally have less security than small and medium-sized enterprises (some officejets may fall into this category) and some devices of small and medium-sized enterprises have less security than the enterprise-class devices.

  If your employer has hundreds of HP devices and is not regularly update their firmware or is not sure these devices you have the right to worry.  vulnerabilities have been found over the years and without upgrading your devices to the version the most recent FW printer you don't leave your company open to different kinds of attacks.  If you are concerned about the security printing and want to know how your company can ensure these devices yourself using WJA 10.x here are a couple of documents that can help.

  http://wpcfs.Corp.HP.com/TECHWEB_WPC/documents/HP%20Printing%20Security%20Best%20Practices%20For%20HP%20LaserJet%20Enterprise%20Printers%20and%20HP%20Web%20Jetadmin%2010.PDF

  http://wpcfs.Corp.HP.com/TECHWEB_WPC/documents/HP%20Printing%20Security%20Best%20Practices%20For%20HP%20LaserJet%20Enterprise%20Printers%20and%20HP%20Web%20Jetadmin%2010.PDF

  HP offers also imaging and printing Security Center which will allow you to implement, improve and maintain a policy of security in all of your fleet full printers in a network of companies.  You can find more information here:

  http://www.HP.com/large/IPG/gateway/security_center.html?JumpID=ex_r2548_go_ipsc

  Hope this Helps!

  Jen

• computer in question being, trying to download the latest update (kb981852) whenever I have download nothing is updated and the security symbol remains (yellow shield of windows).

  Einf is the message I get.  I did what I usually do to download but nothing happens.  I noticed there are 0 download size, so I guess that nothing is there for download anyway.  The windows symbol, I assume that something is wrong.  Please could someone enlighten me.

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...
  Update security for Windows XP (KB981852)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

• Windows Vista not able to support the WPA2 wireless security problem

  Recently, I upgraded my router wireless to a Linksys 400N series N wireless router.  I use WPA Personal / RTK to authenticate and on all my XP and Vista machines, I was able to enter the security credentials and connect to the network. However, on a computer Windows Vista SP2 I be prompted to enter a field of login/password / username each time I try and connect to the network.  There must asking me my password and that's it.  This same card was working fine like WEP when I use my old wireless router.

  I deleted this adapter wireless network and sharing Center, ensured that the machine is part of the domain, uninstalled the wireless network card (which is also a Linksys product), assured the latest version of the driver and tried almost all the trouble shooting tips I can think.

  I've seen this identified as a problem in a few threads but no final resolution.  Any help/suggestions would be appreciated (no suggestion to buy a Mac tho!).

  Update:
  ----------
  Well well, after a diagnosis much more, I have determined that it is certainly a problem of Windows Vista.  If I plug a different adapter in the computer (which runs on a different computer), I get the same problem.  I was on the phone with Linksys for an hour and basically they have thrown in the towel and gave me an RMA for their card, though I doubt it will solve the problem.

  Is there some registry entry to set the type of authentication for a wireless adapter?  It seems that Vista keeps thinking it is the incorrect authentication mechanism.  Is it possible to 'fix' service wireless on Windows?

  Okay, I think that the real problem is that Windows Vista doesn't have the type of select WPA2 security (which is what the router broadcasts).  Is there a way to enter in this somehow?  It seems that Windows determines the types of security available according to the driver for the wireless card.  However, I use a Linksys Wireless-G USB Adapter (WUSBG54) and it says that it supports WPA (although I can't determine if it is only WPA or WPA2 as well).  In any case, hope this additional information helps all those who have a few cycles to provide some guidance.

  Hello

  WPA or WPA 2 encryption is actually supported by the wireless card that you have installed on the computer. As you only could use WPA earlier, it seems that the wireless network adapter supports only WPA and WPA 2 encryption key.

  Because the computer is in the domain, we recommend that you post your request here for more support options.
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads/

  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ARC mouse and wireless keyboard to stopped working after update

  On Tuesday, my keyboard Microsoft's ARC mouse and wireless are busy to my desktop HP running Windows 7 Ultimate.  Since then, there has been a number of updates installed and the ARC keyboard and mouse are no longer works.  I got out my old clumsy Laser Keyboard 6000 and plugged in and it does not work this is how I write this.  But enter the Device Manager or the installed Microsoft keyboard application does not show the ARC keyboard or a mouse as even installed.  I plan to do a system restore, but I probably need security updates installed on 4/14.  Ideas?

  UPDATE:

  Thanks for the suggestions.  I would have thought than to simply unplug it disconnected and reconnected the cause would detect automatic to reinstall drivers, as suggested by @cookie7746 - but it was not detecting the keyboard and the mouse at all, even at the start of the system when only the BIOS is running.  Who told me I could have a hardware issue not only a software driver problem.  I followed him there down to a faulty USB Extender.  Not related to the software, but a hardware problem.  When I replaced the USB Extender that the connections for the mouse and keyboard of the CRA is well connected, everything works.

  So suggestion for those who encounter it: try restarting and during switching on, press the function keys that you use to enter the BIOS settings screen - it is usually CTRL/A or F10 or something - it will usually tell you in a message is displayed briefly that you start.  If it works, you know that you have a good physical connection and the problem is a Windows driver issue.  If this does not work, the problem is not with Windows - it's a hardware connection problem that can be caused by low batteries or dead in the camera (I had this happen to me) or something with USB connections.  Best suggestion at this point is to start eliminating things (like me) by unplugging it the USB Extender, I had these connected directly to USB ports on the computer.  With this process of elimination, you should be able to narrow down the problem.  Good luck!

• Design of authentication to vSphere

  If the authentication for the company is currently managed by an authentication mechanism for the organization other than active directory, is it possible for the company's existing authentication mechanism to manage authentication to vSphere allow?

  If Yes, what is the best way to handle this?

  for example, does:

  -Use active directory for authentication and configure active directory for outsource the authentication requests to the existing enterprise authentication mechanism

  -Use another option

  What are the options to make this happen?

  Your contribution is appreciated.

  Thank you!

  Hello

  Moved to the security forum.

  There are several places "authentication and authorization" to worry...

  (1) A & A vCenter

  (2) ESX/ESXi A & A

  (3) A & A vMA

  (4) vSphere SDK has & one that is really vCenter or ESX/ESXi A & A

  (5) webAccess has one that is really vCenter or ESX/ESXi & A

  For vCenter that authentication is based entirely on some mechanism supports Windows Server running vCenter. So if your current windows mechanism supports that you can use for authentication.

  For authentication of ESX, you are limited to what is supported by the Linux RHEL5 with WHAT is already installed in the service console. Including NIS, LDAP, Kerberos, same AD (which needs a bit of improvement) and other such things. If you install the agents service console to manage authentication then you may need to uninstall when you ask VMware support... Not the best way to go IMHO, but is certainly possible, as long as you crush all "existing" packages to make your job of authentication... Install in a different root.

  For authentication of ESXi, you are limited to the standard * NIX authentication and authentication AD similarly.

  For the vMA of authentication, you are limited to just that Linux uses normally but once again does not replace all existing packages and I suggest you only install in a different root, as it that everything is 'supported '.

  I found that most 3rd party security tools and other things for VMware only integrate with AD, if you're fairly limited if you have 3rd party tools.

  You need to look at the entire image during the design of authentication and not only vCenter or ESX.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Satellite L735 does not connect to the internet (wired and wireless)

  Hello

  I have a brand new L735 satellite, and I'm having a lot of trouble with internet connections.

  When I connect to a wireless network it is the profile and connects but still then doesn't say: "no internet access" for two IPv4 qnd IPv6 connectivity status.
  I tried troubleshooting, turing off the computer, and wireless network and stil back, but it does not.

  The same phenomenon occurs with the workplace wireless, despite other computers that connect to this good (so it does not come from the networks). I also tried to connect to work with an ethernet cable but no luck.

  I have the Atheros AR9002WB-1NG wireless network card and the Atheros AR8152/8158 PCI - E Fast ethernet controller.

  I don't know what to do as the laptop is new and so it should not need to updates, all parameters are default, etc.. I'd appreciate some help here!

  Hello

  Uninstall or disable the TCP/IPv6 and use only TCP/IPv4 protocol.
  Also check whether in the properties of TCP/IPv4, IP address and other parameters are defined to assign automatically

  I recommend also check the firewall and some security applications that may be preinstalled on your laptop.
  It might be possible that antivirus or firewall block the laptop to connect to internet.

• Printer and wireless Netbook do not communicate

  NetBook and printer are on the same wireless network.  Unable to print remotely from the Netbook. I downloaded the new driver for the

  HP Photosmart printer more B210e. Unable to get the checkbox on this printer, even if it seems to be connected to the network.

  Something is blocking the connection.  Try to print documents does not have a print queue.

  Hello

  ·          What version of the operating system is running on your computer?

  Step 1: Temporarily disable the security software and check if the problem persists.

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2: Printer problem in windows.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• uninstall the KB955759 and KB972270 security updates in xp

  automatic updates from 19/01/10 made my almost powerless browsers especially firefox. These two [955759 KB and KB972270] security updates have been installed in the afternoon, and I have since been in pc _. I can't do a restore.
  Is there a method to cancel any security settings has occurred with this update of XP Home?

  See the section "How to get help", for example, http://support.microsoft.com/kb/972270

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Security customer includes home links page free security update support, too
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• help with HP Laser CM1415fnw wired and wireless installation

  Hi all

  I have a hard wired and wireless. He let me just do one or the other. Is it possible that I can do both?

  everything works if I'm wired or wireless, but the user wants to be able to use both.

  Any help would be great.

  Sorry, cannot be enabled by design.  That said, the devices on a network don't like the way that others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.

• Mrs. mouse software keyboard XP and wireless both cause popups

  MS wireless mouse and the software keyboard XP that both make the pop-up windows that says that their non-plug-and-play drivers have not passed test of Windows Journal EACH time my laptop Toshiba is started. The mouse and keyboard work just fine, even though the software has been removed via Control Panel.

  Hello

  ·        What is the model of your mouse and wireless Microsoft keyboard?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        Where did you download the drivers from?

  Maybe it's that the drivers you are using are not signed. There is a huge difference between self-signed pilot and a pilot signed WHQL.

  Signed drivers WHQL (Windows Hardware Quality Labs)- Labs provide various test suites for hardware and software including suites that allow pilots to test devices and "signed". A pilot "signed" is considered stable and ready to be used on a specific operating system such as Windows XP and Microsoft allows the seller to claim that it is "designed for Microsoft Windows XP. Products that meet the compatibility requirements are also allowed to display Windows logos on the packaging of the product, advertising and other marketing material, which indicates that the product meets Microsoft standards and that the product has been designed to work with the Windows operating systems.

  Trouble of self-propelled PODS are like false drivers and are not the signatures are not recognized by Microsoft.

  I suggest you follow the steps mentioned din the article given below to check if the drivers you are using are signed or not.

  How to check the unsigned in Windows XP device drivers

  http://support.Microsoft.com/kb/308514

  You can see the article mentioned below.

  Pilot test Plug-and-Play

  http://msdn.Microsoft.com/en-us/library/dd450398.aspx

  I suggest to download the latest drivers from the Microsoft website and install it on the system and check if the problem persists.

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Mouse and wireless keyboard no longer works

  my hp dv6000 laptop came with the mouse and wireless keyboard, and I use them for 2 years with no problems. Today, while typing, the keyboard is not responding, as well as the mouse. the red light on bottom of mouse is on. I tried pressing and holding the Connect button on the receiver; no lights are lit on the receiver. I have replaced the batteries in the keyboard and the mouse. no action has resolved the problem. I restarted my laptop and that didn't help.  I would try to download the driver for the mouse and the wireless keyboard, but I don't know what is the driver. can someone help me. Thank you

  MY KEYBOARD WOULD ' T CONNECT AFTER AN UPDATE OF THE SYSTEM. IT WAS DUE TO A ZONE ALARM IN MY SECURITY SOFTWARE THAT PREVENTED CONNECTIONS UNAUTHORIZED WIRELESS. CHECK THIS BOX IF YOU HAVE ALREADY DONE A SYSTEM RESTORE AND BATTERIES AND SWITCHING USB PORTS AND UPDATE DRIVERS AND UNLOAD THE CAPASITORS AND OTHER GOOD LUCK!

• Ethernet and Wireless NIC inoperative; can not be uninstalled; It comes after virus removal

  After a virus removal, which did not seem to remove the files that would make this kind of problem (in fact he only renamed infected files), my Broadcom network to the ethernet port interface cards (1) and (2) wireless networks and (3) nVidia network controller are inoperative.  (Exclamation point in Device Manager under Network Interfaces error 39 ' no driver not loaded"of course; all implemented by a device MS_PASSTHRUMP driver).  The system is a laptop running WinXP SP2 (with its double chips AMD processor THAT XP SP3 installs successfully not when I tried it).

  Just by the way, the virus scan from a Linux bootable CD based, which seems to be a great idea to prevent some nifty behavior that virii have evolved until today, when they can actually run out of danger.  I wish I knew why the renaming of non-critical files where virus signatures have been found could cause this kind of problem with all the network adapters on the system.  The only linked folder links to networking was in the HP wireless Assistant and I have always used the Windows installation for the control of the wireless connection. (More later on this scanner).

  Additional verification shows that any problem 3 NICs have 'pilot' charged by Windows (if you ask "Driver Details").  For 2 of the 3, there is another very similar device (the exception is the driver of the Mini IP WAN), with their drivers loaded, from which you can determine the driver files.  All driver files are present (especially in the Win/Sys32/Drivers/folder of course).  Non-working devices have all "»" added to their names, to be a unique name, I guess. "  Windows seems to ignore the other copies for use, but does not seem to deal with the extent of their drivers OK loading.

  I tried to disable the problem devices and reboot, but that solves nothing.  If I try to uninstall any of these devices of problem (so that they can be reinstalled?), this operation fails, a message "failed to uninstall; may device is used for the start. "  There is a boot in the BIOS of the ethernet option, but that is disabled in the BIOS.  I wonder if these three devices have been added by the virus as a "shell" around actual devices and drivers for viral use?  If so, just be able to remove the devices of hull could them might solve the problem. with the exception of the hooks, they could have placed in the original device drivers.

  I also tried to reinstall these devices from the files of data recovery of manufacturer (HP) and that seems to unfold, but does not change anything about the netwrok connectivity.

  Things work to the point that a ping to itself (127.0.0.1) succeeds, so stack IP seems to works, but trying to ping the gateway router (which connects the laptop), fails - I used the ethernet (wired) connection in time.

  Tried to go back to a previous restore point, but who also does not work.  The Windows shell commits a violation of memory protection (each time) when you try to restart using (any) previous restore point, so the system restore undoes any changes he might have done could have fixed the issues above.

  Many details above.  I am looking for no idea regarding: (a) what could happen here, (b) how the network problem cards make installable again to get rid of them, (c) any other thing that might apply.

  Thank you.

  =======================

  November 5, 2009

  Problem solved.  Here's how.

  The blackout "Network Interface Cards" were virtual devices, created by the Virus.

  Steps, I made before the previous post (above):
  (1) unplug the machine infected of all access to the internet.
  (2) on another computer, I went to http://www.free-av.com/, click on the download tab and under "Free tools" at the bottom, chosen Avira AntiVir Rescue System.  Then I downloaded it, run, and it burned a bootable "rescue CD".
  (3) has taken the CD for infected people kicked and machine from him.  If you cannot open your CD with power off, another way is to start the system, insert the CD, then restart the system.  Pay attention to all messages early in the boot process before Windows loads.  Depending on your system configuration, you may need to change the boot sequence so that the CD drive is checked before the hard drive.  It's usually pretty easy to do, once you pressed the right key during startup to indicate you want to take control of this small point.
  (4) I forgot the exact option here once the CD boot system, but select that you want to run the virus scan.  It took about 2 hours on my laptop.  The initial default is report results only; I suggest to change that to rename infected files (which will add an XXX at the end of any "infected" file).  The analysis is quite complete, but can be overagressive at times.  It is not a complete scan, given that the big Compact files assessed completely.  Recording on paper for future reference: all of the alerts that were generated, the path and name of the file and the reason for the alert.  Some will probably be partial matches to the viral bosses identified as 'contains a model of detection' (a partial match suspicious), rather than 'contains the threat XYZ' (which means that all paired for identification).  Some of the files "suspicious" may be essential to the operation of your system and you want to UN-rename them back to their original name.  If in doubt, check with someone who knows the PCs.
  (5) now you should have a system contains it a neutralized virus to work for removal.  That's where I was when I filed the report.  My major issue remaining before cleaning the pieces of virus, which was now there is no internet access, no cable, no wireless on the infected system.

  OK, so what next?  My infection cause a virus named ndisvvan.sys driver.  If you also have this bad actor, then you may want to read in detail.  If not, then the following may, or do not apply to your case.

  (6) first, in Windows Explorer (let us remember that we are in Win XP), click on tools, then Folder Options... and select the view tab.  Go to the bottom of the list and select "Show the hidden files and folders" and uncheck "hide the file Extensions known Types.  We will need to go into the hidden folders and know exactly the type of file that we deal with.  I guess it goes without saying that yu has to be a system administrator for what to do next.  Win Vista it makes it much more difficult, since sometimes the administrator has no access to all the files that have been installed by a different administrator ID.  It must mess with you give permission, or appropriate, the files you need to access.  I suggest to make a new folder ("VirusParts") to store all the files that you find on the virus, until you are ready to delete them forever.
  (7) first of all, open the file C:\Windows\system32\drivers\etc\HOSTS (now called HOSTSXXX) and move this file to your VirusParts folder.  This part of your internet access is now unlocked.
  (8) then go to C:\WINDOWS\inf, and browse for the files netsf.inf, netsf. PNF, netsf_m.inf and netsf_m.PNF.  These are the files that most likely loading drivers virus in your system.  Having a peek inside .inf files can help you identify some of the changes made by the virus to your registry.  The virus probably also created a new service on your machine.  In my case, the service was named Passthru, and device to implement ms_passthrump (Microsoft Passthru Miniport).  These names are actually from a document from Microsoft that explains how to develop programs of virtual device to filter the data goes or network devices.  If these are directly related to your virus, the program driver specified inside them will be none other than our ndisvvan.sys enemy.  Research in .inf files (these are files text; the.) The PNF files are binary, not text) can help identify the service or services that the virus added to your system, which are now (essentially) a part of the operating system that starts automatically with Windows.  Since there is no virus in the .inf or the. The PNF files, they will not be detected by an antivirus.  All .inf files sort in order of the date and time of creation.  Suspect not with a close date of one of the files netsf.inf and netsf_m.inf.  Windows compile .inf files in the. PNF files, which can occur a few days later, when windows moves to this task.  If you find these files, move them to your VirusParts folder where they can not be recharged.
  (9) to start the Panel (from the start menu), double-click 'System', then select the Hardware tab, then click the Device Manager button.  Expand the category of Network Interfaces, and some of them should have an exclamation point in a yellow circle showing.  If you right-click on each one and select Properties, you should see an error 39 (driver not found; the antivirus program renamed their ndisvvan.sys file).  If you click on the other tabs in the properties, you can find the device is something like ROOT\MS_PASSTHRUMP\0000.  Now, you know that you are very likely to something.  I had three devices affected with numbers 0000, 0001 and 0002.  Carefully note the names of the Network Interfaces.  Two of my friends were identical to the names of other Interfaces of network but with "»" added.  The interface of third-party network with a problem was named 'Miniport network EXPANDED (IP) -'.  But there is no corresponding legitimate network interface of the same name.  Common Council to recharge a bad driver is uninstall, no new hardware detection and let windows reload from .inf file specifications.  However, if you try to uninstall these interfaces (those with here in exclamation points) Windows tells you that they can't be uninstalled and "perhaps it is used to start" or other similar term.
  (10) this part is a bit tricky.  Ask someone who knows how to work with the Windows registry, if you're not on this topic.  Mistakes here can have disastrous results.  Enough said?  If you search the registry for "passthru", you will get several matches, mostly related in one way or another for the virus and his new 'service '.
  Under a path like HKEY_USER_MACHINE\CurrentControlSet\Enum\Root\MS_PASSTHRUMP\0000, you will find information as the name of the interface (make sure it matches the name that you noted earlier) and manages a definition of tha of the pilot program.  For example {4D36E972-E325-11CE-BFC1-08002BE10318} \0014.  Do the same for MS_PASSTHRUMP\0001 (probably {... (10318} \0015) and \0002 (probably {... (10318} \0016).  The string of numbers and letters within the {...} identifies a particular program for windows, and the \0014 a particular use of the program {... 10318} is actually a standard part of windows and not a part of the virus.  However, uses \0014 \0015 and \0016 of this program have probably added by the virus.  Save the links: MS_PASSTHRUMP\0000 related to {... 10318} \0014.  Now, go to HKEY_LOCAL_MACHINE\CurrentControlSet\Class and you will find a long list of class programs identified by their number {...}.  I suggest from the end of the list and the expansion of each occurrence of our {... 10318} in the list, one by one.  If you select the subitems in the extension of this list, each device has a name.  You are looking for Netwrok Interface devices.  Under the instance of our {... network interface devices 10318} it will be to the less 0014 points and probably at least 0016 (based on the links that we just recorded). 0014 resembled a legitimate wireless LAN interface, so I don't mess with this definition.  However 0015 and 0016 looked like they have been added by the virus.  Inside of each specification, you will find a key named "characteristic".  Its value is what prevents us from uninstall the network interface in the Device Manager.  Its value is a hexadecimal value that integrates several indicators for Windows.  In particular, the value 0 x 20 is the bit that specifies that the device cannot be uninstalled by the user, and 0x08 tells windows ' hide ' this device of the user.  Almost all of my devices had characteristics codes 0 x 29, including those created by the virus.  (I don't know; others might have been modified by the virus, but that seems a bit unlikely).  In any case, for the interfaces added by the virus, network we need to change their characteristic values of 0 x 29 something like 0 x 1 (you can also display the device).  Note that changing the characteristic value is a reversible operation that is likely to harm anything in the system.  We can always go back and change it back to 0 x 29, if we have not uninstalled the device.  In my case, I put the characteristics values on 0 x 1 for 0015-0016 devices, which looked like, they were added by the virus.  I did this in the CurrentControlSet control set and for good measure repeated it in ControlSet001 and ControlSet002 registry.  (Windows retains backups of critical information in the registry, in the different ControlSets and creates the CurrentControlSet Control at the system startup set.)
  (11) now return the Control Panel, then system, then the Hardware tab and then the Device Manager button.  Now you should be able to uninstall the network with exclamation points interfaces in the yellow circles, those we checked earlier was connected to the ndisvvan.sys driver of virus, using the MS_PASSTHRUMP interfaces for Passthru Windows service.  Since it's virtual devices, and we removed their .inf and. The PNF files, they're not coming after we uninstall them.
  (12) now, we have removed the network interface drivers that are added by the virus, but legitimate real pilots are not connected in the system correctly, so our internet connection still does not work.  We need to re - install the drivers of legitimate network interface.  To do this, in the device, right-click Manager and uninstall the device controller network legitimate.  On my HP laptop, it was named "nVidia nForce Network Controller".  After uninstallation, in the window menu in Device Manager, click Actions, and then select "Scan for hardware changes".  Windows should report that she has found a new network interface device and that it is set up, and in a minute or two, it is ready for use.  At this point, on my system, both the wired ethernet port and wireless LAN bustled again.

  I still have to go around cleaning the files renamed by the antivirus program and get them out of the PC, but at least the PC is now working without virus.  The virus may also have damaged the process of restoration of the system, which still fails to restore the previous system configuration.  (Windows Explorer always creates an exception address on reboot).  I still need to work on this problem.  The virus 'off' system restore for all drives by using a parameter, however the TWEAKUI tool (I think it was what I used) allowed me to override this setting and control of group policy.

  There are a lot of viruses out there who adopts this method to take control of low level of connections from the PC to the internet, while allowing to download more viruses and keyloggers in the future in respect of the remote control.  Some of these viruses attach also to the many many files the user program.  In this case it has little alternative except to wipe the drive and start over with a clean, install since often these files cannot be cleaned.  Fortunately, my infection was not serious, and it was possible to remove the virus as described above.  I hope this description helps somebody out there.

  This answer is just a formality to change the resolved state.