DesignJet 1055 CM Media impression

Hello, our shop signs here in the city of Rock Hill, SC has acquired a 1055CM and we wonder if the printer prints on vinyl mm 2 & 3.  If so do we need to change the inks and printheads?  Thank you for tickets or directions. D


Hi @DOC_1399

I suspect that your question it will be better answered in the HP Enterprise business community, as your HP printer is a business model.

My technical expertise is with consumer products and software, I'm sure the sales people would be happy to help you if you re - ask your question for them to answer. The HP Enterprise business community is a Forum HP designed for commercial customers and business help each other. I'm sure you'll find some people here HP help also.

Click here to see the printing and digital imaging. When the page opens, you will see the option to "Log in" or "register now" on the right. Commercial forums are distinct from the advice of consumption, so you will need to register if you do not already have a trading account.

You can find the useful page of the HP Designjet 1055 cm printer supports while you wait for someone in the Trade Forum to meet your demand.

Good luck.

Tags: HP Printers

Similar Questions

  • Designjet 1055 cm liked: designjet 1055 more power cord

    I am need of a power cord for my Designjet 1055 cm plus. It seems that I need a power cord C13, is that correct? Will work any cord or I need something specific to the printer?

    If in the United States, it's just the standard desktop computer or computer monitor power cord.  None of them will work.

  • Portal HP DesignJet 1055 CM more

    Hi all

    I recently got a used HP DesignJet 1055 CM Plus and when turned on I got the error mentioned here:

    Designjet 1055 cm Plus - error code 007 has a 0251 09 001

    So I removed the internal HD, following the instructions here:

    DesignJet 1055 CM plus - replacement hard drive help

    After removing the disc hard/Daughter Board (1055 CM Plus is equipped with an internal HD as mentioned in the thread above), I have cleared the error and the printer started normally. However, I have a few questions:

    1. The printer can operate normally under the descriptions very on the internal hard drive?
    2. The hard drive can be replaced with the HD external accessory port like the 1055 CM?
    3. I read the answer in the 1st thread above by user DavidZuts that there is a driver (GL2) that you can use less hard on this model. Can someone develop on that? I'd like to get this thing print again, but I need to know if everything works. Other suggestions are welcome and would be useful!

    I apologize if I walk on this forum with too many questions, but I'm glad that this forum is full of so many knowledgeable people. I have another would have been up a Creek less a paddle.  If it's useful I intend using this tracer in a mac environment via the jetDirect network port.

    Thank you!

    The printer will work without the hard drive, but you will not be able to use a postscript driver. If you need such as the use of a MAC postscript, then Yes you can use a hard drive of the 1055 CM. I know it works because I had to change the room either a customer with a longer Board and I moved the hard drive. I had to use a longer back cover because the slots did not, line up but will not be your problem.

  • DesignJet 1055 cm prints cyan bands constantly any help would be much appreciated

    Hello world

    First, I want to mention that I am a technician in the field for all 20years on the road. My question here is that one of my clients have HP DesignJet 1055 cm that prints strips cyan on everything you send to the printer. Including test internal pages examples: test page for quality; demo page; Settings page. I replaced all the print heads to be sure before you start ordering spare parts. I also contact HP ASP support and sent them a picture and sound indicates the following parts in the following order. Trailing cable, transport and main PCB Board. Because this printer is no longer under warranty and chargeable to the customer, I want to ask this forum for further assistance. Please, any help would be greatly appreciated... SAL

    Hello world

    Guess what the main logic board was the problem. As soon as I replaced the main logic Board no more cyan stripes. Full closed appeal. Even if I ran the test of service never it report a problem with the logic board? Thanks for all help I really appreciate the help. Thank you

  • DesignJet 1055 CM will not be running

    We have a DesignJet 1055 CM that worked very well until I tried to turn it on this morning. The screen displays the message "autotest", then indicates ".." then shows "Initializing" for a few seconds. I hear a click from the left side of the Board drawing, then it starts the sequence again the message "autotest". She repeats this sequence if lit. There is no error message is displayed.

    That is a known issue with this liner has a bad spot on the coding Strip which sometimes causes problems with loading the paper. He had the problem with the band of coding for years and I've never had a problem he turn before if. I do not think that the two would be linked?

    The only thing that changed was recently I replaced an ink cartridge, but the plotter worked again very well after the replacement of the cartridge.

    Thanks for any help.

    The first thing that comes to mind is the power supply located on the left side. What I would do is remove all the printheads and ink cartridges. I would be so off tension in the back of the plotter, plug it in again click the switch on the back to turn the unit back on. If you still get the led at the front of the drawing on red Board and the power button on the front is not working, then power would be the most likely cause. If you is not the model number, you can still use power supply plu model as there is no part number for the power supply for non plus a model.

  • A DesignJet 1055 CM c6075a would work OK with Mac OS 10.7 (Lion) or 10.8 superior?

    A DesignJet 1055 CM (model A, c6075a) would work OK with Mac OS 10.7 (Lion) or 10.8 superior?  I don't have a Mac; I plead for a potential buyer of my 1055CM. The 1055CM currently has 96 MB of RAM; I could put 128 MB in.

    I would get "out of memory" problems?  I think that maybe there is no "computer in process" option in the Mac OS 10.7 for the 1055CM pilot, but I'm not 100% on that.

    I guess it depends on how simple designs are. The application is for printing large topic say 24 "x 24" vinyl stickers vinyl roll.  Well, maybe raises another question: would a 1055CM, printing on vinyl OK?; I guess because they seem to be very similar architecture/configuration as a 5000 or 5500 and these OK printing on vinyl.

    Thanks a bunch.


    Hi Paul

    I wouldn't say a 1055 for work of vinyl. There are a few suppliers who can provide a vinyl fot this printer, but it's not too successful.

    First ink 1050 won't last long, it will fade fade very quickly. (you can use a laminate liuid, but time consuming, will not worht it.)

    Secondly, the 5000 series printers have a different ink, it means the UV ink and ink to dye. Two inks are specialised in the printing of "vinyl" or "post".

    Your best bet is to get a HP designjet with Viera of ink, with the correct paper, that they have to use intermediary.

    Otherwise a second hand series Z (Z2100 going quite cheap, comes in a cheaper A1) these printers have pigmented ink which have a longer life of the door.

  • I need a driver for HP Designjet 1055 cm Inkjet Printer more

    Original title: HP Designjet 1055 cm Plus printer inkjet

    I use Windows 7 + 64 bit and require a software driver for the hp designjet 1055cm printer. Are offered

    I use Windows 7 + 64 bit and require a software driver for the hp designjet 1055cm printer. Are offered

    If you manually add plotter with control devices and printers, add printer and use Windows Update to fill the available printer drivers, printer is listed under HP, HP DesignJet 1055 CM by Hp or HP DesignJet 1055 CM PS3.
    1. Click Start or press on the then select devices and printers from the list on the right. When the devices and printers windows opens and fills, click Add a printer among control options at the top.
    2. To open the Add Printer window, first select Add a local printer. Then select a port and click Next.
    3. In the next window, first click on the Windows Update button and wait a few minutes until the list is filled again. It will look like nothing is happening, but it's work. Once the lists are updated, select HP for manufacturers and HP DesignJet 1055 CM by Hp / HP DesignJet 1055 CM PS3 with Printers.
    4. Click Next and enter a name for the printer.
    5. When you click Next must install the printer driver and you'll end up with the last screen where you can run a test print.
  • ArcSoft Media Impression does not capture the image complements this body image top

    * Original title: Arcsoft Media Impression

    I recently installed Arcsoft Media Impression, which came with a film scanner to enable me to scan my old negatives (negatives, 110 and 35 mm).  The problem I have is that when I capture photo software seems high crop the original image.  What is captured is about 2/5 of the image as shown on my screen.

    How can capture all the photo?  Can anyone help?

    Hello Adam,.

    I suggest you contact please contact Arcsoft support

    (Contact support)

  • DesignJet 1055 CM path error msg

    Just finished replacing the belt according to the manual. set the table plotter back together and turned on. After auto checks are completed it begins to initialize and then I get the display "turn the power off. Check the path of the print head. 1 "

    I've checked everything and still get this message. I had a lot of rubber dust I cleaned before putting the new belt and also used the applicator of oil on the stems roadrunner front back together.


    The coding Strip was not sitting in the Groove on the print head.

  • HP DesignJet 1055CM: hp 1055 09c 000 error code

    I get the error code following the HP DesignJet 1055 CM after that I turn on.  Error Code 09C000 007A023C.

    09 errors are related to the eio devices.  First thing you want to do is to turn the power off and then remove all eio devices you have.  They will be either a hard drive or a network card.  Now put the plotter and see if it comes to loans without the error.  If only they we features eio is bad.  Most of the time, it's the network card.  According to the model of the network adapter, you can sometimes repair with bicarbonate.  If the card is a look 610n or 615n for cooking instruction on this forum.  If the error is still there without network cards installed, then the main Board must be replaced.

  • Print drivers for 1055cm more on 64-bit Windows 8


    I'm not able to find a print driver for the Designjet 1055 cm more for Windows 8. Anyone know where I can get this driver for Windows 8 or if there is a work around for this problem?

    Thank you



    There is no Win 8 driver for the DesignJet 1055 cm.

    But, you can use the Win Vista or XP Driver.

    Here is the link to get the driver.

    I hope this helps

  • missing usbstoragemanager.dll file

    During one of the updates for something (windows, antivirus, a program etc...) my usbstoragemanager.dll file has been deleted or is missing. This happened about 3 weeks ago. I have a HP laptop that runs windows 7 and a HP camera model SW450 running ARCSOFT MEDIA IMPRESSIONS to import pictures.

    When I click on the icon to open ARCSOFT, USBSTORAGEMANAGER. DLL comes up.

    My question is how can I get this file back so I can upload photos?

    Hello wavewatcher,.

    Welcome to the HP Forums!

    I understand that your Arcsoft software does not work because of the missing file. To resolve this problem, you should be able to simply uninstall and reinstall. Please try and let me know what happens.

    If you still need assistance, please provide model number of the computer. If you need help to find this information, please see this site: Product Guide to find your mobile phone number

    Thank you!


  • Could not start the print job. Is available from the printer? Charge of CS3 on Windows 7 64 bit

    Hi all:

    I have a PC network. As part of their basic installation, I load on CS3. I started to integrate Windows 7 and found the following on each problem, but not on one of the XP.

    When my users try to print from Acrobat 8 that they receive the following message is displayed: "could not start the print job. I have a printer? ».

    This happens when trying to print to one of our printers, the printer HP designjet 1055. I have the drivers 32 bit and 64 bit installed on our print server.

    I read a post somewhere in program files common files could play up because there are 2 location of files of program on windows 7 - but I'm no more on this one here.

    I don't know there is a work around for this issue, recorded for the 101 others.

    Someone at - it ideas?

    CS3 has AA7 I think, maybe AA8. Compatibility Win7's AA9. Others may work, but the risk becomes yours. Adobe will tell you simply to upgrade. Several people have AA8 working most of the time. I think that a few may have succeeded with AA7, but I'm a little surprised.

  • DesignJet 5500: Where can I download the media for ink UV #83 profiles?

    The links below allow you to download media for DesignJet 5500 profiles.  First you must choose your computer operating system.  If you select Windows 7, you won't see listed media profiles.  If you select Windows XP, you will see 10 types of listed environments.  If you click on one of the listed media types, then look at the file name to download, all file names have "dye" in the name of the file.  Where can I download profiles of supports for UV #83 inks?

    HP download page for media for inks Dye #81 profiles

    For 5500 HP media profiles page & swLangOid = 8 & swEnvOid = 228

  • HP designJet 130nr: Spotlight on roller automatic power media must not enter.


    I recently bought a HP designjet 130nr used large format, and I noticed that the lights on the Auto Roll power media does not illuminate after I turn on the printer.

    Can someone please?

    The tracer feeds on?  If that's the case then you may have a problem with the drive roller.  If you remove the roll and look down inside you'll see there's a torx screw that mounts to the part of the feed roller who has the power connector.  If you remove the screws (there may be two) and then remove the part you will see there are about 3 or 4 contacts mating when the part is being challenged.  Make sure that none of these contacts are irrelevant.  If the unit power ot on, then remove the parallel cable and the cable to the socket on the printer and plug the unit directly into the outlet. The unit now power on.  Keep in mind with this model when you plug in the cable that the light will Flash several times in front of the screen and the time of glass can turns on but then turns off.  When it fires on the front power button is pressed to turn on the machine.  If the light on the front does not blink a few times you may have a power supply problem.

Maybe you are looking for