DeskJet 1010: Printer lacks USB cable out of box

Similar Questions

• HP Deskjet 1010 printer does not print

  Windows 7 Home Premium, 64-bit. New Deskjet 1010 printer will print only in the program of LibreOffice.  When I try to print from the internet or if I try to print a file on my computer, I get the message: "an error occurred during printing.

  I ran the program doctor HP, have installed the latest drivers from the site HP Web. Nothing seems to help.

  I was copying and pasting into LibreOffice in order to print, but it's much too long. Hoping someone can help. Thank you.

  In my original post, I said that I had downloaded and installed the latest drivers from the HP site.  I haven't restarted after installing the drivers of thinkI.  A few days later, after that I restarted the system, the printer work properly. Just a reminder to restart after an update like this.   Thanks for your reply.

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• DeskJet 1010: the deskjet 1010 printer work with windows 10?

  I'll upgrade to Windows 10, just check to see if my Deskjet 1010 will go with me. It currently works on Windows 7. The 1010 Deskjet is perfect for the little printing I do, I don't want to change printers if I have to.

  Hello

  Thanks for posting in the Forum from HP Support.

  As mentioned here : most applications and designed for Windows 7, hardware drivers or later should work with Windows 10

  Windows 10 is not yet officially released. Unless it is officially released drivers, no official support is present. For now, no official guarantee cannot be provided. However, I am sure that it will work properly. 10 Windows should recognize automatically.

• Is it possible to connect the HP Photosmart C4780 Wireless printer without USB cable?

  Hello

  My family and I recently moved and while moving, something inevitably get lost or left for account.  I am fighting to get this printer and will so I don't have to bother people at the front desk at school to print my documents for me.  I have lost/misplaced both the HP Photosmart C4780 printer software disk and the USB cable.  I have no idea where these things are and have not found them within two months, we've been in the new House.

  I solved the issue of the loss of the installation disk by downloading it from the HP site.  My problem is now getting beyond the USB connection and get the currently installed software.  Because I run on a MacBook Pro, it always tells me that I need the USB key to continue the installation.  I'm on a Verizon Wireless router, and I even tried to find the printer on my wireless network with no luck.

  Help, please!

  Thank you.

  It's the type of cable you will need (ignore the color of the cable, the ends are the important part).

  

  Have a new router is not a problem, but remember the SSID and password wireless exactly, otherwise it will not work (if you decide to try Method 1). It's a bit like "trick" your printer into thinking that your new router is your old a long enough to configure the network settings for the new (desired).

• DeskJet 1010: Prints very light and apparently only in gray

  I use a deskjet 1010 with magnetic ink to print checks.  For some reason, it is only printing in very light gray.  I cleaned the print head, which did not work.   I then reinstalled the printer still does not work.  Help, please!  Thank you.

  Hi @FedeL,

  Welcome to the Forums of HP Support!

  I understand that you are unable to get a magenta print on your printer HP Deskjet 1010. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have cleaned the print head, which did not work. There could be a problem with the ink cartridge, printing or distribution of ink system.

  Check the print settings:

  •  Printing and changing Print Settings (Windows)

  How to print in color, black ink only or grayscale

  Depending on your job printing, color printing, black ink only or grayscale. The following color options may be available for your printer:

• Problem with the Hp Deskjet 1010 printer.

  Original title: can anyone help?

  I just got my HP deskjet printer 1010 and cant get the software to install to run my printer can anyone help?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP - printers supported for Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03168175&cc=us&DLC=en&LC=en&product=3794625

  HP - how to get your printer works with Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03494007&cc=us&DLC=en&LC=en

  HP Deskjet 1010 - software and drivers<- set="" to="">
  version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5157546&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Deskjet 1010 - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5157546&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DeskJet 1010: Printing envelopes

  This is a new printer. I have no impression of problem on the leaves, but the envelopes are a nightmare. I load one or more envelopes as indicated in the Guide, but when I try to print one, either (1) an envelope does not move and I get a message will. (2) a charge to Midway without printing and I get a paper jam message; (3) one prints but with no border and that half of the address of the sender on the envelope; or, finally, (4) it prints correctly, which seems to suggest that the loading is the problem.

  I start with the left guide completely to the left. I have a few envelopes of size of the company (9-1/2 x 4) on the right of charge and their seat to the bottom. I slide the left guide until it comes into contact with the envelopes.

  Print from Lotus Word Pro, which automatically sets the envelope printing settings; not this previous problem with my printer (Epson).

  Feedback appreciated,

  Rob

  Hello drshi,

  Welcome to the HP Forums.

  I see that you have problems when you try to print on envelopes.

  Please click on the following link which explains printing and changing settings of printing (Windows).

  Once you have selected the envelope size, a suggestion that I should avoid paper jams is to get the tabs inside the envelope.  This step is a bit of your time if you make multiple prints, but it will save paper jams occur.

  I also suggest that you remove any paper from the printer when printing envelopes.

  If troubleshooting doesn't help not solve your problem, then I would say contact HP technical support to see all the other possibilities for you. ,: click here.

  Thanks for your time.

  See you soon,.

• 3510 DeskJet not print wireless, USB Yes

  I have Mac OS 10.9.1. I can't print wireless. I reinstalled the driver and software from the HP Web site.  Can print the page 'do your printer... ". ' successfully. When trying to print anything that anyone else, will not work. Download it! Select this option. Run wireless network test, everything was OK. Checked the wireless settings is enabled, direct wireless is disabled. Help, please.

  Hello

  Have you installed the following package?

  http://FTP.HP.com/pub/softlib/software12/COL52000/Al-125724-2/HP-inkjet-SW-OSX-Mavericks_v12.34.55.dmg

  My suggestion: uninstall and try again for a clean install.

  Kind regards.

• USB cable for hp 4680

  Hello

  In the installation of my printer that I just found out there is NO usb cable in the box.

  What kind of cable should I buy for the hp 4680 all in one?

  Thank you

  

• HP Deskjet D4360 printer

  Help!  HP Deskjet D4360 printer is practically new out of the box - probably printed a dozen copies to date.  Ink cartridges are genuine HP and also almost brand new.  The printer has been used for a few months, which has never been a problem w / my previous 4360.

  Initially "printing" white pages; re-installed the software and provided a sample page in various shades of blue, with the "20" in the almost invisible centre.

  I cleaned and re - clean cartridges (basic and intermediate); aligned and re-aligned; calibrated and calibrated; primed and re-primed - to no avail.  With printing alignment, I'm not able to determine any # s in order to answer the questions about the visible lines least.

  Undertook to research further and was guided on how to print a 'diagnostic' page - the printer chatters and click on that it will do something, but nothing.  The instructions give no indication of how long to press the power & Cancel buttons, so from different eras have been tried.

  Also turned the printer off and restarted it about half an hour later--had no effect.

  I need to use this printer today - any of you experts can help me?

  Have you tried to install new cartridges?

• Deskjet 1000 printer - J110a: printer prints a blank Page - HP anthentic color and black ink cartridges are full

  Used this printer for months without problem until he ran out of color ink. Buy genuine HP color ink on amazon and replaced the empty color ink.  Installed the latest driver. Printer seems to work fine except the rest blank page. HP Print and Scan Doctor 4.9 finds no errors, no problem.  Cleaning print head. Aligned printhead printed normal test result on the page. Results of tests on white page. Yet performance printer continues to give green checkmarks on all issues. No error found.  I followed the video instructions from HP customer support, but the problem persists.  http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/docu...

  Given that you've tried the HP web site, try these videos Youtube here.

  https://www.YouTube.com/results?search_query=DeskJet+1000+print+head

  Find out more if necessary.  If no joy, your printer is toast.

• Type of USB cable for Laserjet CP1025 Color

  I just bought a printer Laserjet CP1025 colour of HP uk online store and I took it from the box.

  NOWHERE, I find a USB connection cable.

  How can I plug it into my laptop to make it work without the connection cable?

  What is the cable that is supposed to be?

  Can someone give me the exact type or a link to order the HP, or on amazon uk store?

  Thanks in advance!

  Hello

  To reduce costs, many printers have no USB cables inside their boxes. I think the USB cables are in boxes of printers for the only region in AP. You need a cable that is similar to:

  

  The rounded end is for your printer and the flat end is for your computer.

  Kind regards.

• installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

  I have an hp computer, product number NY545AA #ABA, with windows 7, 64-bit and a hp deskjet F4480 printer. During the installation of the printer, I get to the screen that you can plug USB cord say printers and after about 2 minutes. It says no device found. The USB cord is plugged into the printer and the computer, the printer is on. Finally, I have checked, add a device later. I fight the computer and printer together, about 3 years, the printer never worked. I have downloaded new software and the HP driver for my printer, 1 week ago, it did not help.

  Try to use the other USB cable

• Change the order to print on a HP Deskjet 1010

  On the Advanced tab in the Options for layout, I don't have the choice to change the printing order.  I tried following the instructions given to someone else, but I don't seem to have the option "back to front".  I'm sure I'm in the wrong place, but I tried every tab I can find.  Thank you.

  Hello @chogekat,

  Welcome to the HP Forums!

  I understand that you don't have an option to change the order of the pages using the Deskjet 1010. If you do not have this option in the layout options, then you can not change the order of pages. What is your operating system on your computer? Windows or Mac?

  You can try to install another driver on your computer. If you have a WIndows computer, please follow this HP document to install another print driver in Windows 7 for a USB cable connection. Install a Deskjet 450, as it has an option to change the order of pages.

  Please post your results, I will be looking forward to hear from your part have a good night!