DeskJet 2540: enlarge/reduce copy

Similar Questions

• HP Deskjet 2540: Enlarge/reduce the size of the document during scanning.

  Is it possible to enlarge/reduce size of document on the Deskjet 2540? My wife uses this function to its sewing patterns. If not able, could someone please recommend software?

  Thank you

  Tom

  Hello

  No function zoom, you 100% het (size) of the original when scan. No need to buy a software, you can use Windows Paint to increase/decrease the file scanned.

  

  Kind regards.

• All-in-one Deskjet 2540: copy on Deckjet 2540 darkness setting

  How set you the dark copies on this printer.

  Hi @WJF1,

  Welcome to the HP Support forums.

  I understand that you are willing to adjust the darkness of copy on the printer all-in-one HP Deskjet 2540. I would like to help with that.

  The all-in-one printer HP Deskjet 2540 doesn't have a menu of copy that you can access to adjust the darkness of the copy. You can only set the number of copies. All documents are copied to print normal quality mode. You cannot change the quality of the printing mode when copying.

  You could, as a work-around, scanning the document or image to your computer and then use a third-party software, like Photoshop to darken the document or image. Here is a document that can help with scanning if necessary - using full function software scanning (Windows 8) HP.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• DeskJet 2540 - letter size copies do not print low half inch

  Setup: Deskjet 2540, Windows 7 Home Premium (64-bit), wireless connection

  Problem: with a letter size (8 1/2 x 11) original, pressing a button on the copy translates copies that Miss the bottom 1/2 inch of the original.

  If I scan the original even, save as a PDF file, then open it in Adobe Reader, then file/print prints the whole page only if I select 'Fit' or "Shrink oversized pages" (resulting in a reduced size copy) - otherwise the printed page will be still absent of the bottom 1/2 inch of the original.  Is not an acceptable workaround, because I need format copies of the original set of format letter with all the content of its original size. Isn't this possible?

  The specification for the Deskjet 2540 margins are 0.57 "for Windows systems and 0.47" for Mac or Linux, see here for more information.

  Figure : margins in portrait orientation

• Can you enlarge/reduce the size copies?

  For the HP Officejet Pro 8600 e-all-in-one printer can enlarge/reduce the size of the original by making copies?  Even for the more than 8600?

  If you select the copy option on the front panel of the Officejet Pro 8600, then you will present a screen with the settings... in the middle of it.
  
  Select the settings option:
  * Scroll down to resize
  * Use the arrow keys left/right to scroll the resize options.
  
  Resize Options:
  * Actual size of 100%
  * Full Page 91%
  * Adjust page
  * Custom size
  * Legal letter 72%
  * Letter to A4 94%
  * 2: 1
  
  I hope this helps.

• Scanning multiple photos on a series of HP Deskjet 2540

  Recent HP AiO printers allows users to scan and save multiple photos using the scan software.

  Here's a video that shows you how to do it:

  https://goo.GL/qfQyf4

  So that this works, you need to install the HP software that comes with the printer using the CD or you can download a copy of the software of the printer to

  http://WWW8.HP.com/us/en/drivers.html

  Type in your printer model to download the software for your computer.

  The following printers have this automatic feature of "Crop":

  HP Deskjet 1010 series

  HP Deskjet series 1510

  HP Deskjet 2540 series

  HP Envy 4500

  HP Envy 5530

  HP Officejet 4630 series

  HP Officejet series, 2620

  HP Officejet Pro 8610/8620/8630 series

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  For more tips scan, please see this post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/using-your-HP-scan-software-scanning-Guide-...

  Click on the STAR of CONGRATULATIONS on the left, if it helped you somehow.

  Some good information here, thanks greenturtle!

• DeskJet 2540: Deskjet 2540 Wi - Fi

  I have connected the printer and everything works screws a USB cable. Direct the wireless router and wireless lights are permanently and test sheets say everything is good. However it will not print wireless. On the attempt to download ".net framework 3.5", which tells the 'doctor' me I need I just get an error message. The 'doctor' also told me that I have not downloaded the correct software. I started with the cd of the software supplied with the device. I've deleted and reinstalled twice, everything to nothing does not. I can see the SSID of the network direct but can't seem to connect to it.

  Help!

  Hello @seagull104,

  Welcome to the Forums of HP Support!
  
  I understand that you are having problems during the installation of your printer all-in-one HP Deskjet 2540 wireless on your Windows XP computer. I would like to help you to solve this problem today. While you receive a message of .NET Framework under the HP print and the tool of analysis of the doctor, because you are able to print via USB cable connection, I don't believe that the .NET Framework must be causing this specific wireless installation problem. On the contrary, there may be one occurring problem of connection Wi - Fi. I'll run to configure you through some troubleshooting steps the network connection on the printer.

  • To clarify, you want to use Direct wireless with your computer or Wireless?

  Wireless Direct means that you connect to your Windows XP computer to your network name SSID printers. You cannot use the internet on your computer at the same time that the use of the printer.

  With HP wireless Direct printing

  Wireless means that your printer and your computer communicate wirelessly through your router. You cannot connect to your printer, once the wireless feature has been implemented.

  Wireless printing with

  If you want to use wireless, need you a USB Câble temporarily for the wireless configuration. Once the wireless connection has been implemented that you won't need the USB cable. Please follow the steps below to configure your wireless printer.

  Step 1: Checking connection:

  On the control panel of the printer, press the Wireless button () and the button to start copy black ( ) at the same time. Print the Network Configuration Page and Test Page for the wireless network .

  On the Page of Network Configuration locate the SSID network name. If you want to use the Wi - Fi real the SSID network name should be your network router. Your computer and your printer as well need to be connected to your router network name.

  Then, if the SSID network name is perfect, locate address IP. If you have an IP address proceed to the steps below.

  1. Open the internet browser on your Windows XP computer
  2. In the address bar type in the printers IP address. Do not include www.
  3. Search this site

  If a Web site for your printer opens correctly: That your printer and your computer communicate wirelessly. We just need to correctly install the printer at this point and the problem will be solved. Please proceed to step 3 below to remove all software and install your printer wirelessly with the appropriate drivers.

  If a Web site for your printer fails to open successfully: That your printer and computer are not communicating. Maybe your printer is connected wireless Direct. If you want a true wireless connection, you want to avoid Direct wireless. Your computer cannot be connected to the network printers. Please continue with the steps below to resolve this issue of connectivity.

  Step 2: Powercycle network:

  1. Press the power button on the printer to turn it off.
  2. Unplug the power cord at the back of the printer.
  3. Unplug the power cord from the routerwireless.
  4. Turn off the computer.
  5. Wait 30 seconds.
  6. Reconnect the power cable to the wireless router.
  7. Wait 30 seconds, or until the router is completely ready.
  8. Turn the computer on.
  9. Wait for the computer to recharge.
  10. Reconnect the power cord to the back of the printer.
  11. Turn on the printer.

  Please proceed to the next step.

  Step 3: Wireless Configuration:

  1. Please disconnect the USB cable before you continue
  2. Click on the Start menu
  3. Select the programs (or all programs)
  4. Select the HP folder
  5. You select HP Deskjet
  6. Select Uninstall. Please follow the prompts on the screen to complete the uninstall
  7. Click here to download the drivers for your HP Deskjet printer
  8. Once the download is complete, follow the prompts on the screen to install your printer
  9. Choose the wireless connection of installation using USB
  10. Connect the USB cable only when the installation program prompts to
  11. Once the USB cable is plugged the computer will "send" the wireless identification information to your printer through the cable connection
  12. Once the without wire is set up successfully, you will be prompt to disconnect the USB cable
  13. The installation is now complete

  Once installation is complete, please try printing to check if the wireless connectivity problem is resolved.

  Please reply to this message with the result of your troubleshooting. If the connectivity problem is not resolved, please specify if you want to connect via Direct wirelessor Wireless. Good luck!

• DeskJet 2540: deskjet 2540

  I'm trying to install the HP Deskjet 2540 on my MacBook Air, Mac OS X 10.10 Yosemite running.  I downloaded the drivers on the HP site and installed the drivers.  When I get to the HP Setup Utility, however, the clock has been running and my printer does not appear in the window.  I tried re - install the drivers a number of times.  I turned off the printer and turned it back.  I have reset the router.  Nothing has worked so far.  The blue light on the printer just keeps blinking and I can't connect to it.  One of the solutions was to press the wireless button and follow the prompts on the screen on the printer, but it is not an option on this printer.

  Any help or suggestions you can give me would be greatly appreciated.

  Donna.

  Hello @Donmor4,

  Welcome to the Forums of HP Support!
  
  I understand that you are experiencing connectivity problems when you try to configure the connection to your printer all-in-one HP Deskjet 2540 communicate wirelessly with your computer Mac OS X 10.10. I would like to help you today with the configuration and installation of your printer. Cable USB A is required for initial wireless installation. Because the blue wireless LED blinking on your printer it shows this printer you is looking for a network, but has not successfully connected to a network at this time. Therefore, I'll run you through some Mac standard troubleshooting steps to set up and install your printer. Please follow the steps below.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under "Reset printing in OS X Lion system." This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do not add your HP Deskjet in now.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens select the drop down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Configure and install devices:

  1. Please click here to download the installation package full feature software and driver for your HP Deskjet printer
  2. When the download is complete, Please connect the USB cable from your printer to your computer
  3. During the installation process you will choose your USB connected HP Deskjet printer cable, then, there should be a box to select to connect wireless. When you see this please select the area.
  4. Wireless for your network credentials will be transferred to your printer via the USB cable. Once the wireless connection was set up the blue light wireless LED will be solid on your printer.
  5. At the end of the installation you will cut the USB cable from your printer to your computer and Remove (-) the copy of the USB cable from your printer in the print window & scanning. You will then be prompted to hit the sign (+) to add the copy Hello (wireless) of your printer

  -Source

  Once your printer has been installed successfully on the wireless network, please test printing.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• DeskJet 2540: Deskjet 2540 print and Scan works on Windows 10

  I have installled, uninstalled and reinstalled the software half a dozen times now, on my Windows 10 machine, but I still don't have any interface to scan documents.

  The installation process has shown a success install and I was able to recognize and connect to the printer. In my Start menu, the new option 'Scan & Print' is there, as shown in the screenshot (click on the screenshot to the size of the full image).

  But when I click on the option, instead of the usual analysis and the dialog box print, I am faced with a new printer 'Connect' and 'Add more software' options (see screenshot below).

  How can I get to the good old scan dialog box?

  Among others, I used to have an option here to scan directly to PDF. This option is not accessible from anywhere on the machine and is something I desperately need to back.

  Has it been removed from version 10 of Windows? I ran a search for "Scan" computer, but the only options I get are native Windows analysis (which works very well for the individual photos) and this dialog box. Nothing that would allow me to scan a document of several pages in PDF format

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-2540-all-in-one-printer-series/5295960/model/5295961#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  You would be able to scan multiple pages in PDF format. This resource will show you how:

  Scan multiple pages to a PDF document

  https://goo.GL/NcB2oc

  The following resources will be useful for your scanning needs:

  Quick Guide for scanning needs
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

  Hope that helps.

• HP DESKJET 2540: My HP printer connects to the wrong wireless network

  Hello

  I use a MacBook Pro, OS X 10.9

  I have a printer HP DESKJET 2540

  I just installed a new network at my place. I'm trying to connect my printer to this new network wirelessly via WIFI.

  BUT the printer keeps on connecting to the previous network, which is an open access network (FreeWIFI)

  I've tried EVERYTHING. I pressed simultaneously the Wireless button and the button to launch the copy in black. The wirelss test report shows that my printer is currently always logged the previous SSID

  Help, please!

  TX

  Hi @JACE1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 2540 guard wrong wireless network connection. I'm happy to look into this problem of connectivity for you!

  On the wireless test report, must be an IP address from the printer. Try putting the IP address in a web browser, such as: Safari or Firefox, etc. You should see a built-in Web server. Find the network tab and then select it. Then, look for the wireless configuration wizard option. (This should be able to search for the network wireless appropriate for you).

  See page 55 of the User Guidefor more details your printer.

  Hope this solves your problem and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Deskjet 2540 - run with XP Service Pack 2 (2 machines, one other 512Ram 2048 RAM)

  Hi, I wonder if someone could give me some advice

  Try to get a new an all-in-printer for my elderly father who has 2 machines, a desktop computer with XP SP2 and 512Ram and a laptop, I gave him with XP SP2 and 2048 RAM

  He has no internet access if they're independent, but he needs a new printer and the Deskjet 2540 seems to tick all the boxes for him, BUT everything I've seen suggests there XP SP3 as the minimum.

  If the 2540 do not, is that someone could suggest an alternative similar basic spec machine that would work for systems that there

  Thanks a lot S

  If we had a go at the download for use on the laptop - there were a few problems, but in the end, we managed to get this working

  It's questions and that's how we overcame the

  1 no internet connection on the machine, downloaded the link on a stick of a connected machine, copied on the laptop and I tried to extract and run. Excerpts, but would not go beyond Set - up. Tried several times, even issue and tried to connect to microsoft.net framework, saying that they had the 3.5 version to continue. (only version 2 on XP laptop)

  2 used in m/c to load the .net framework 3.5 on memory stick, transfer it to laptop and run, but still kept trying to connect to the internet to run it out of there.

  3 so focused in trying to establish an internet connection and wifi on the laptop. After a lot of pain reached this, went to the site of microsoft and .net framework 3.5 directly downloaded on laptop with the statement to execute. Has taken a while but it downloaded and installed. Computer restarted-watch installation qualified.

  4 then tried the same thing with the HP link above - IE a download direct and executed. He ran, followed the instructions and connected the printer when requested. All steps except activation - wouldn't connect on the HP Web site link.

  5 creates a document word on the laptop, tried to print it - that prompted a test page and the mod by placing the page printed on the scanner. At the end of the word doc printed. Clicked on the button to say activation to change the time.

  Printer 6 now seems to work fine, just like Copier and scanner - we keep our fingers crossed that it continues!

• OfficeJet Pro 8620: enlarge the copy on 8620

  How not enlarged copies on this machine?

  To enlarge (or reduce) copy size on the Officejet Pro 8620 follow these steps:

  • From the Control Panel, select copy.
  • At the bottom left of the screen is a small gear, select this option.
  • Scroll down to settings, in the lower part is resize.
  • Click on resize, and select the appropriate as the custom size option, select the scale desired, fact factor.

• HP Deskjet 2540 not print color

  Hi all! I bought a printer HP Deskjet 2540. I installed using the diskette provided to me and does not print color. I use a Mac version 10.9.4 and I think I need to download a driver updated online, but if not, what can I do to get it printing color? Thank you!

  Hi @patrick_doll

  You are able to copy in color? If so, you're probably right about the question has something to do with the software or driver.

  If you are unable to copy in color, please use the following document to solve the problem; Printer cannot print black ink or color ink, or prints blank Pages

  If, however, you can copy in color please complete the following steps;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• DeskJet 2540: Scanning error

  Nothing wrong with printing - the computer recognizes that she and I can print etc. However, I am unable to do two things:
  1. install the wireless connection
  2 do the analysis. When you use the "print and Scan Doctor", I get this message:
  Driver error: the scan driver is unable to communicate with the product.

  I removed and reconnected the power cord and restart the computer, but it still does not work.

  I jumped the scan after that and found that everything (except Driver and HP Twain Scan error check) has a green check mark.

  Would be grateful for the help. Thank you!

  Hi @lacleman,

  Welcome to the HP Forums!

  I understand that you cannot scan or set up connection wirelessly with your HP Deskjet 2540 on Windows 7. I'm happy to help you!

  A few questions for you, if you don't mind:

  • You are able to make copies with the printer? Copy the text or mixed Documents.
  • Do you see flashing lights on the printer?

  For now, please see the following guides:

  • Setting up the printer on a wireless network for the HP Deskjet 2540 and 2545 all-in-One Printer Series.
  • A "inaccessible Scanner' or ' year error occurred while scanning" message for HP Deskjet 1510, 2540 Deskjet, Deskjet Ink Advantage 1510 and series printer Deskjet Ink Advantage 2545.

  If these guides are not helping, go forward with these solutions:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows 7).
  • Reinstall using the printer HP install wizard for Windows.

  Hope this information is useful and have a great day!

• HP Deskjet 2540 All in One: can I send a fax to a HP Deskjet 2540 printer all-in-one? I have a VoIP phone line.

  Can I send a fax to a HP Deskjet 2540 printer all-in-one? I have phone line VoIP 'Basic Talk'... are not currently connected to the printer.

  Hi @Sunny9,

  Thank you for joining the HP Forums!

  I understand you're wondering if you can fax with the printer HP Deskjet 2540. I am happy to answer this question!

  According to the user's guideof this printer, the printer cannot send fax. It can only print, scan and copy.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!