DeskJet 3050 a cannot disable the unwanted print job

Similar Questions

• Cannot cancel the Word print job - the job status = error

  When you try to print from Word, I can't print because a previous task cannot print.  I tried to cancel the job, but the system will not delete it.

  I have sucessfully printed by e-mail since the former cannot print job, but I can't get this previous work to go.

  Here is a screenshot of the ePrint application that appears when I want to print in Word.

  

  Solved... just had to go into devices and printers, select the printer and cancel the job.

• HP Deskjet 3520 interface - cannot access the intercface/printer control program

  I have an old aio by one year of the HP Deskjet 3520 printer (a little over a year old).

  Recently, my computer (Dell) crashed (about 2.5 years).

  I have now purchased another HP Pavilion (8.1 64-bit-with 'apps' instead of programs) and when I now click on the printer icon to access the interface of the printer nothing happens...

  I tried uninstalling and reinstalling programs, but also updates etc., but it still does not work.

  I can now not for example do scanning to PDF and not to scan several pages in a single document, that I have a great need of.

  Everything has worked with my old Dell computer, but when I bought a new HP (!) it doesn't work anymore.

  HP support will not give me support due to that they claim it's a printer problem. And it's just maginally on a year - so not supported... It was when I bought a new HP computer, that he has stopped working! :-(

  The printer worked fine with my Dell computer recently. The problem came when you buy a new HP computer...

  Really bad HP Support to claim that it is a printer problem, which is a bit more than 1 year and refuses to support me, when the problem occurred the first time I tried with my new HP computer...

  I'm shocked really...! Not much good will here...

  Therefore, I hope that someone of you guys out there could help me out!

  Thanks in advance!

  Best regards Johan

  Hi Johan,.

  If please try following the steps below and let me know if that can help you, don't forget to use the instructions in Windows 8 aimed to 8.1:

  http://support.HP.com/us-en/document/c03640384

  Kind regards

  Shlomi

• HP deskjet 3050 a series: during the analysis of my printer HP Deskjet 3050 a I get the COMPUTER NOT FPUND message on my printer

  When I scan from my HP deskjet 3050 printer has series, I get a message on my computer printer not found. If I connect the printer on my computer I can scan from the printer. Scan doctor tells me that there is nothing wrong with my printer.

  Hi @eightysecond,

  Welcome to the HP Forums!

  I understand that you cannot scan to the computer of your HP Deskjet 3050 a on Windows 7. I'm happy to discuss this issue scan for you!

  Please take a look through this guide, a "computer not found," "No computer detected," or "connection error" message for HP Deskjet 3050 has e-all-in-One Printer Series.

  Hope this guide to solve your problem and have a nice day!

• I need to know how to disable the test print cause everytime I turn on the printer prints featured.

  I need to know how to disable the test print cause everytime I turn on the printer prints featured.  It is hp1315 series.

  Hello

  If you want to disable printing test page, you must check with the manual of the printer. Try the steps from the following link:

  An alignment Page prints whenever the all-in-one is turned on or off or a print job is started
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01336397&cc=us&DLC=en&LC=en&product=1146336&tmp_track_link=ot_search

  I suggest you to contact HP for better support.
  http://h30434.www3.HP.com/T5/printer-all-in-one-software/BD-p/software

  Additional information:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01577197&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=360489&prodTypeId=18972

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• HP Laserjet M606x: Disable the option 'Print' in the built-in Web server

  I am testing a new HP Laserjet M606 device and to disable the option 'Print' which is displayed in the 'Information' tab in the built-in webserver (EWS). I have a firewall turned on, turned off wireless printing, FTP, AirPrint, Web Services, PPI and independent producers is also disabled. HP Jetdirect XML service is also disabled. I have crossed most of the EWS settings and configuration options in JetAdmin and did not find an option to turn this feature off.

  The device will be located in a public place and will have a reserved/static IP address (DHCP reserved). We charge for services to the end-users of printing - having this option turned on means that users can print for free if they find the IP address of the printer - not an ideal situation.

  Is it possible to disable this option permanently? The only other solution is to disable EWS entirely, if possible.

  To be a little more specific in the built-in web server click the Security tab. Now scroll down until you find the section for embedded web server settings. I was watching who had enough current firmware in the machine there is a checkbox to enable or disable the option for printing on the information page.

• Cannot disable the hidden administrator account

  Am running Windows 7 Home Premium. I activated the hidden administrator account and renames and added a password via an elevated command prompt. Now using the same elevated command prompt cannot disable the account. Error name is not found.

  What is the exact command that allows you to disable the account?

  What account names you see when you type this command:
  net users

• Disable the finger print scanner

  How can I disable the Finger Print Reader on a portable Pavillion M7 under Win 7 SP1

  Hello

  Reach:

  Control Panel-> device-> biometric devices Manager

  Click with the right button on the fingerprint sensor and choose "disable".

• Cannot disable the CS6.  Have disabled successfully recently because of computer problems.  Is there a limit to the time that you can disable?

  Cannot disable the CS6.  Have disabled successfully recently because of computer problems.  Is there a limit to the time that you can disable?

  Hello

  I think to delete the content in the files SLCache and SLStore files should work for this.

  Concerning

  Jitendra

• How the prior print jobs can be deleted?

  Original title: print - screen

  Try to print to the screen, the status of the printer says that there are 9 previous impressions. How the prior print jobs can be deleted?

  You must delete the queue, as follows:
  Open a run window (Windows Logo key + R), type cmd and press ENTER. Now, type these commands, which are in uppercase for clarity only:

  NET STOP SPOOLER and press enter
  DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press enter
  NET START SPOOLER and press enter
  EXIT and press enter

• My printer will not remove the last print job

  My printer will not remove the last print job and does not meet what I already found on internet support

  Hello

  If you haven't done so already, try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• DeskJet 3050 has errors in the press cannot use alignment

  Hi, I hope you can help.

  I just today inherited a second Deskjet 3050 J611 from a friend a hand. I'm setting up on my system and I have a problem with the alignment page printing.

  My system is Windows 7 64 bit and I have connected the printer wireless to my network. The thought I want to calibrate the printer I ran the alignment, but go looking at the alignment of the mine of the internet pages is decidedly not just. Some lines seem to be missing and the illustration at the end of printing is 'lines' with blank lines. Therefore, the analysis of the alignment fails. I also printed the windows test page and that seems doubtful too with the lines of print with the tops? cut, but some lines are intact. I've included a scan of the print-out of alignment if it helps to diagnose my problem. At least the scannner works!. I can print from my Ipad 3 even if the quality is not good and the same thing with Windows printing, I hope that if I can make the alignment that the seeds will disappear.

  I changed ink for new trucks and installed the latest drivers and software from the HP site.

  Please help if you can.

  

  In General, this kind of question is cleared up by the replacement of the ink cartridges. Especially with Deskjets and more with have received you second hand, the chances of the cartridge/print head (they are combined) being empty or clogged is very likey. I would as a first step, and if this does not resolve the issue here is a document of support on print quality issues which can also produce some more light on the question you have:
  
  
  
  http://www.HP.com/United-States/consumer/digital_photography/print_better_photos/tips/print-quality.html
  
  
  
  I hope that helps you out, and if you have any questions do not hesitate to contact me. I will reply to you as soon as I can.
  
  
  
  Have a great day!

  

• Cannot get deskjet 3050 has in a j611 series print

  my printer does not print

  Hello

  Thanks for posting the question on Microsoft community forums. Looks like you can not print using HP Deskjet 3050 has.  Please answer a few questions to refine the question.

  1. do you get an error message?

  2. are you aware of changes to the computer before the show?

  3. what happens when you try to print?

  I suggest you perform the steps described in the article:

  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please reply with the status so that we can help you.

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• HP deskjet 3050 a cannot connect

  has printers HP deskjet 3050.

  Can't connect wirelessly to... tried all the hp helps but still not working when I enter the ip address in the configuration of the printer

  print report say nothing but good things. Firewall disconnected... gunna lob it out of the window very soon...

  Someone at - it ideas

  See you soon

  Shaun

  Hi shaunuk,

  Follow the instructions in the document below.

  http://support.HP.com/us-en/document/c02722113