detect the emulator or device

Similar Questions

• Qosmio G50 does not detect the connected Bluetooth devices

  The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
  Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

  I did a test to see if it could depend on the PC or the mouse.

  I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
  And the phone does not detect the qosmio via bluetooth.

  What checks can I make on the qosmio while ' I detect devices via bluetooth?

  Tank you

  Hello

  BT has been successfully activated on tis G50?
  Have you used the FN + F8 key secret to switch on the BlueTooth?

  Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

• MAX do not detect the installed PCI devices

  MAX (DAQmx 7.4.) don't detect my PCI devices installed, as if win2k has detected and installed. The NI PCI-devices are correctly listed in win2K Device Manager.

  Hello

  Please send me a report of Measurement & Automation Explorer:
  Start-> all programs-> National instruments-> Measurement & Automation Explorer.
  Then press file-> create-> Technical Support Protocol and system My->-> then then-> choose path-> next-> finish.

  Maybe the following knowledge base helps you to:
  "What is the process to remove MAX Database Corruption?": http://digital.ni.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9?OpenDocument

  !!! Please make a backup before removing the database of MAX:
  ' Export/Import (save) the Configuration of the measurement system and Automation Explorer (MAX)': http://digital.ni.com/public.nsf/websearch/0E0D3D7C4AA8903886256B29000C9D5A?OpenDocument

  Best regards

  SUSE

• detect the usb uninstalled device removal

  Hello

  I have a request where I put a serial number on a USB device. I then remove the registry using Devcon (Devcon does not uninstall the device if it is not plugged in). At this point, I want the operator to disconnect the device from the cable. My problem is that with the uninstalled device Devcon recount the event disconnect.

  However, Device Manager will refresh to unplug the unit, even with it uninstalled. If something told him to cool off. How do I tap into that?

  And I look at this link, but could not help me. I missed something?

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=249567&requireLogin=false

  Tay

  One of the boring bits on URLs is that they are static, so if the target no longer exists or has been moved, the links are no longer valid. I know that the two links I had planned in my response to this other thread are no longer valid. One pointed to a thread of LAVA that no longer exists. LAVA had a major server crash earlier. The other link is to a project that has been moved to a new location. Don't know about the site of George.

  As to what to do now, one thing you can do is to use the Windows Message Queue library.  The example provided with the library is pretty self-explanatory. In your case, you want to listen the WM_DEVICECHANGE message. The Readme contained in archive lists the values for the various messages.

• Windows XP Pro unable to detect the USB mass device

  Original title: USB

  I have a Western Digital ("My Passport Essential" WD3200ME) portable mass memory. My PC is running XP Pro with all the latest news from the security of Ms. In the last year or two, I noticed that it becomes progressively difficult for XP to recognize my USB mass storage device - sometimes, he took a reboot and repeated the reconnection of the device before the device is recognized. MS updates, the more difficult this because to make a connection. When it fails to connect, I get this annoying Hardware Wizard, which constantly to appear, asking Windows to search for the correct driver. I also have an old Pro XP PC I have installed all the updates latest MS, but it has XP SP3 installed. The old PC has no difficulty to recognize and connect to the same USB mass storage device. So I have 2 PC Pro XP: does not work with the latest updates from MS that gives connection problems to my USB mass storage and the other XP Pro base. Even if I bought another USB mass storage, it would probably suffer the same problem. What do you think is the problem?

  One of the best USB debugging of sites I've come across is this:
     <>http://www.Uwe-Sieber.de/usbtrouble_e.html >
  Go about 1/2 to the bottom of the page and look for the section titled: "application for XP drivers.  Most likely, you just need to delete the file "infcache.1" and let it rebuild.

  HTH,
  JW

• Windows 7 does not detect the GPS Garmin device.

  Original title: the hardware detection.

  I recently bought a Garmin GPS.  I can not get my PC running windows 7 to detect it.  Fortunately, I still have my old machine with XP and it recognizes.  How can I get my new machine to detect.  I down loaded new drivers from Garmin website, but nothing helped.  My old machine ran to 64-bit the more recent short 128 bit if it's any help

  My Magellan 5236 T wouldn't connect to Win 7 Premium. Began to look for someone with XP. Duhh!
  And that's this worked on my Compaq Mini Win 7 Starter Edition (in french!).
  Go figure. There are 32 bit vs 64.  It may be useful

• Unable to deploy the MAF application on the emulator or device in the last downloaded SDK

  Hello

  Jdev: 12.1.3

  I was working at the request of the MAF with old android SDK, which has been downloaded a few months back.

  I downloaded the latest SDK the android site form. But now the app is not deployed.

  It throws the below error:

  After a throwugh search blogs I have deployed the apk file directly on the device, but then the initial screen of Red Oracle load forever and I do not get the intended page.

  Please help me.

  [11: 08:52] Server Android Debug bridge closure...

  [11: 08:52] undeployment.

  [11: 08:52] - incomplete deployment.

  [11: 08:52] deployment failed due to one or more errors returned by "C:\Hari\Softwares\Android\android-sdk\platform-tools\adb".  What follows is a summary of the returned error:

  Failure [DELETE_FAILED_INTERNAL_ERROR]

  MAF 2.0.1.2.0 is not compatible Android 5 Lollipop (API 21).  You can leave installed in the SDK, but all 21 API also download API 19 and use instead.

  Lollipop support is coming in the next version of MAF due.

  CM.

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• Flash player detects the reboot, but not otherwise

  I saw one with a MS vista home premium Acer 4710. The USB ports are not detect any hardware (printer & flash drives) when I plug while the system is turned on.

  However the system reads the flash drive when I reboot the computer with the drive of fash already plugged. This means that the USB ports and other devices are working properly and it's a software problem. I reinstalled the whole software with the acer system recovery tool and updated to the factory settings. Please help me to solve its too urgent because I'm leaving on a trip.

  !!!!!!!!!!!! PLEASE SOMEONE HELP ME!

  concerning

  Hello

  · Were there any changes made on the computer before the show?

  · You have defined on the computer's power options?

  Follow the step when the computer does not detect the following USB devices connected to the computer:

  Run this utility from the following link: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

• SRM 5.1 does not detect the existing unit of vSphere 5.1 independent replication

  Installation guide 5.1 SRM said that RS can operate the vSphere replication stand-alone version:

  " If you installed the stand-alone version of vSphere replication 5.1 then installRS 5.1, all existing twinning and replicas are immediately accessible thanks to the SRM user interface"

  http://pubs.VMware.com/SRM-51/index.jsp?topic=%2Fcom.VMware.SRM.install_config.doc%2FGUID-E8859207-0D9D-414e-8A2A-CEAC0FCA76A3.html

  However, MRS. 5.1 does not detect it.  When I go to the page of replication vSphere in SRM, it seems that if no VR device has been deployed, as if she still wants deploy me them to SRM.

  
  

  How do you get SRM 5.1 to detect the existing VR device and all of its repetitions?  Thank you.

  
  

  Hi Mike,.

  SRM 5.1 requires a separate VRMS and VRS. If you deploy VR 5.1 5.1 SRM and do not use an existing independent RV unit, you always deploy a single device (which contains a VRMS and a VRS) which is ready to use without any additional configuration. MRS allows you to deploy one or more additional VRS for load balancing purposes, but it is completely optional.

  So, normally, it shouldn't matter if you have installed VR 5.1 as stand-alone unit or if you have installed since SRM 5.1. For all purposes, that's exactly the same device. Have you tried you are looking for RV in vSphere Web Client rather than in MRS. interface? If vSphere replication does not appear in the Web Client, then it could be that the VR device is is not registered with vCenter Server or RV service does not, which could be due to a network problem.

  If RV is displayed in the Web Client vSphere then VR runs correctly and the problem is indeed with the connection with MRS.

  Thank you

  Stuart

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

  

  I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

  Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

  

  I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

  Even HP Support Assistant does not detect the wireless network card hardware

  

  Help, please!

  Hello

  According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

  The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

  Please download, save & install the Dirver and restart the system, check if the wireless works.

  Concerning

  Visruth

• Message error "the driver detected a controller on \Device\Harddisk5\D error.

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  It could be malware believe it or not. It could also be a failing hard drive. I recommend that you first scan your computer with scanners on the links below ensuring that update you before the analysis.

  Malwarebytes.org

  SUPERAntiSpyware.com

  If the scans are own return, you will need to go to the website of the manufacturer of your hard drive and download the diagnostic tool for your hard drive. It will probably take an iso that burn you to a disc and make it bootable. Let me know the results of the analysis, and we'll go from there.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• ATAPI - event ID:11 - the pilot detected an error on \Device\Ide\IdePort0 controller.

  I'm getting following error in my event log Watcher:

  Log name: System
  Source: atapi
  Date: 2009-11-01 01:18:38
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: hendrim-PC
  Description:
  The driver has detected an error on \Device\Ide\IdePort0 controller.
  The event XML:
  
   
     
      11
      2
      0
      0 x 80000000000000
     
      53536
      System
      hendrim-PC
     
   
   
      \Device\Ide\IdePort0
      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000
   
  

  Anyone any idea what is the cause?

  I replaced all the cables and hard drive but I get the same error (wasted money).

  When you start the PC and get "PIO MODE" in computer/manage/Device Manager / IDE ATAPI controllers ADA / ATA Chanel X/properties/Advanced is the cause, your PC is frozen.

  My "temporal" solution for this problem is:

  1 - Turn off the PC.

  2 - pick Up and the hard drive cable through the same port of the motherboard

  3. start the PC and the control in the advanced settings box-> "Ultra DMA Mode 6"; right now, you can work without problems.

  * If you can trade your motherboard (all under warranty) DO!

  -. - We are all waiting FOR you than get Microsoft a solution to force the departure to the top of "PIO MODE" to "ULTRA DMA 6"