Windows 7 does not detect the GPS Garmin device.

Similar Questions

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Qosmio G50 does not detect the connected Bluetooth devices

  The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
  Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

  I did a test to see if it could depend on the PC or the mouse.

  I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
  And the phone does not detect the qosmio via bluetooth.

  What checks can I make on the qosmio while ' I detect devices via bluetooth?

  Tank you

  Hello

  BT has been successfully activated on tis G50?
  Have you used the FN + F8 key secret to switch on the BlueTooth?

  Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

• Windows Update does not detect the sp1.

  Hi all.

  I do update windows via the control panel and its been so many updates, but it does not detect any service packs.
  Anyone know what I can do to solve the problem?

  My computer is a compaq presario with vista home premium.

  Thank you.

  Hello

  Download SP1 or SP2 from the links below:

  Vista SP1:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Vista SP2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  And then perform a clean boot and disable the antivirus, and then restart the computer.
  Clean boot:
  http://support.Microsoft.com/kb/929135

  Install the service pack, and then restart the computer.

  Problem of Windows updates should get fixed after you install the service packs.

  All the best!

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• XP Mode in Windows 7 does not detect the ATI Radeon graphics card

  Hi, on windows 7, xp (virtual), the system mode does not detect my graphics (ATI Radeon HD4530). This card is indispensable to run a business application (multimedia program). Can you please help me.

  Thank you, Christian.

  * original XP mode with title - __Windows 7 - (virtual) with ATI radeon HD4530__Christian.* graphics card

  Windows XP mode provides a virtual hardware platform to run XP programs.  With the exception of some USB devices, it does not provide a direct access to the hardware on the host computer.

  If you need to use your real graphics hardware in XP you will probably have to put in place a system to dual-boot and boot XP when necessary.

• Windows Vista does not detect the printer

  had the printer works fine until Windows vista did an update. Now hp poster printer not detected

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Windows Vista does not recognize the removable storage device

  ISSUE INITIAL 2010-03-03)
  Here's the scenario:
  1. Insert the card compact flash.
  2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
  3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
  4. remove the card compact flash.
  5. Insert the compact flash card.
  6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

  The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

  Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

  UPDATE (04/03/2010):
  I have more information, I hope this helps to reach a solution.

  -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
  -J' then removed the card and rest of the error state.
  -J' I re inserted the card, and rest of the error state.
  -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

  I found the solution on this hp web page:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

  Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

  Some excerpts...
  "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
  "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

• Windows 7 does not detect the additional disks in the selection of drive during the instalation

  OK, I have a Dell Inspiron 17r 7720, it has 2 drives 750 GB and a 32 GB ssd

  the installation of 7 single 750 GB is available, the other 2 drives are no where to be seen

  all are detected in the bios

  any information would be greatly appreciated

  Thank you

  Hello

  Please keep us updated on the status of the issue.

  However, tried to run the Hardware Diagnostic Utility for the hard drive such as suggested by Ashish Sondhi responded on 22 November 2014.

  If so, please answer with the results, in order to help you solve the problem.

  Thank you

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Windows 7 does not detect multiple external hard drives

  I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

  If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

  The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• The Digital Persona does not detect the fingerprint reader in Windows 7

  I have upgraded from Vista to Windows 7 Pro (full installation). Now, DigitalPersona does not detect the fingerprint reader. I tried to uninstall and reinstall the driver and the program, does not. Any ideas?

  Hi Cankermechanic,

  I suggest that you try to update the drivers supplied by Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  If the problem persists, I would recommend that you uninstall drivers and reinstall the drivers from the site Web of Digital Persona, if that is helpful.

  If the problem persists, I suggest that visit you the manufacturer for further assistance from the link below:
  http://www.askpersona.com/

  I also recommend that you contact the manufacturer of the computer for further assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye