Detection of numbers

Similar Questions

• Phone numbers blackBerry Smartphones as links in the web browser

  All-

  I have a section "/ mobile" of our intranet site that our users can access to get the phone numbers.  It was that when they got the list of phone numbers, they can click on the phone number and he would give them the ability to dial the number.  With the torch (checked on two different users), I don't have this option.  The number is just text.  I have never something special for the phone number (it's a link, etc.), so that the browser was just change to a link.

  Is it possible to activate this the torch?  Does anyone do this?  Any suggestions?

  Thank you

  Charles

  Since the Blackberry 6 OS, the browser has the WebKit engine, resulting in what the browser does'nt detect phone numbers more.

  The solution is to make a link with a link to phone:

  00342445545

  Then, when you click on the number it will call the number

• Phone number not an option for iMessage on iPad mini

  Hello

  So my ID Apple was recently hacked and had to change my password on all my devices (iPhone 6 and mini iPad). But now that I changed, my iMessage works well for my iPhone, but on my iPad, I have no option to choose my phone number. I tried to reset iMessage, reset my iPad, everything. Now I'm curious to know why, that's happened what else I can do for an option again.

  Thanks in advance for helping me!

  To go through all these steps?

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

• All my messages on my iPhone were mysteriously deleted after I restarted - is it possible to sync my old backup iPhone with my iMessages on my Mac?

  Hello!

  This past weekend, I noticed that my Messages app acted strangely on my iPhone 6. Accordingly, I turned and turn it on again and noticed that all of my posts have disappeared. I then did a hard reset and turned on - still no messages.

  I have my settings to keep my messages forever, what really saddened me to see all of my messages disappeared. In any case, I'm about to restore my backup iPhone on a new phone (6 s). Luckily, I backed up my phone the week last before my messages disappearing.

  I understand that when I restore a backup, everything that happened on my phone since will not appear. However, I have also the Messages on my MacBook Air app, when kept all my messages before and after the mysterious disappearance on my phone. Once I have perform this restore, I was wondering if it is possible to synchronize in any post-restore on my laptop to my phone messages.

  Thank you!

  Hi masizh,

  Congratulations on your new iPhone 6 s! I understand that you want to synchronize the restoration of post messages on your Mac Messages app to your iPhone 6 s. If these are the iMessages, your new device needs to load the entire conversation once you send or receive an iMessage from the recipient. SMS messages may not work in the same way, however, you can contact your operator for support with text messages.

  To continue to have your Mac with your iPhone SMS sync, don't forget to implement continuity with your new device.
  

  If you have an iPhone, the SMS that you send and receive on your iPhone may appear on your Mac, iPad, and iPod touch as well. You can then continue the conversation from any device is closer to you.

  Set up SMS and MMS messaging

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

  

  Please use the Apple Support communities to post your question. Enjoy your new iPhone!

• Messages are not send to non-Apple users, is no longer syncing with iPhone

  I can't use Messages to send messages to non-Apple users ("your message cannot be sent.'), or it syncs with my iPhone. I have all the settings in place, it has just stopped working.

  Hey Tux Kapono,

  I understand that you have updated to macOS Sierra, and now you can not send SMS messages. I know it's nice to be able to have continuity in your messages on devices, so I'm happy to help you.

  There are a few settings that should be checked to make sure that everything is correctly configured for this feature. This article has more information on the subject:

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support
  

  Set up SMS and MMS messaging

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

  Thank you for using communities Support from Apple. See you soon!

• Signal problem phone 10.3 callUpdated

  Hello

  I have a question that is hard for me to understand and even more difficult to explain so please bear with me!

  I am hoping to make an app callblocker for my mobile and I connect to the signal callUpdated phones and successfully receive updates in my onCallUpdate slot when a call comes in.

  My problem is that my onCallUpdate slot is triggered several times for an incoming call, the first couple of times call.phonenumber () is empty, I thought it was good that I could wait just to phonenumber () .length () is greater than 0 before doing something like endcall().

  The problem with waiting for the length of the phonenumber to > 0 and only do something when the phone number is > 0 is that I also want to detect private numbers but phoneNumber () .length () is 0 for private always numbers.

  Is there another way for me to do something in my onCallUpdated slot when the phonenumber() is available other than check the length of phonenumber() so then I can say if it is a private number?

  Hope someone can point me in the right direction with this.

  Thank you.

  looks like a lot of people to create the same application

  for incoming call fire several times because it has been updated the status of the call.

  the update has been
  callState - phone number
  UNKNOWN - no number 0
  UNKNOWN - no number 0
  1 INCOMING - no number
  INCOMING 1 - number
  INCOMING 1 - number

  You can analyze it from there

• iOS 10 Notes app detects more phone numbers

  I used to use the Notes iOS app as a convenient way to store multiple access to phone numbers to work.

  If you have added a phone number it would detect that and you could just click the link to dial the number.

  In iOS 10 it stopped working.

  Links of # in the Notes app phone are no longer assets and if I try to add a new phone # s, they are not detected as being able to compose.

  Hello, elbenoit!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with call function in the Notes. I know how it is important Notes work properly. First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords to ready for the start of the iPad to the top.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Read a string and detect the first group of 8 numbers

  I want to take an information from the string within a string (file name or folder name)

  The string I want to take is a number of 8 digits (side by side) and it may be somewhere in the middle of the chain.

  For example:

  Large chain A:

  _v_10097822-YVES. SAINT. Laurent.273456YOD02.4176.silk.15113

  Great channel B:

  _v_nkld3sgrf10097822 - YVES.SAINT.LAURENT.273456YOD02.4176.Silk.15113

  I want to always read the 10097822

  How can I do that with the code in a function that returns the number I want to?

  You can try this...

  var numberFromString = getNumbers("_v_nkld3sgrf10097822-YVES.SAINT.LAURENT.273456YOD02.4176.Silk.15113");
  alert(numberFromString);
  
  function getNumbers(str){
  return str.match(/\d{8}/);
  }
  

• iPhone 4 iOS 9.3.2 | Wi - Fi is not grayed out, but available networks cannot be detected!

  Features: iPhone 4S 64GB | 9.3.2 iOS (13F69) | Greece

  Hello team Apple, I'm Athanasios * Thessaloniki! I want to tell you about my problem which is this a while now, and I can't find a useful answer.

  We will explain my problem:

  Suddenly, one day, after I have updated to iOS to 9.2.1 version, wi - fi was not able to detect ANY network, which has been previously connected successfully. I already searched Google my problem in the forums of geek famous Apple, Apple support page (Yes, here), YouTube, but a solution absolutely nothing for her. As the Wi - Fi connection button was not gray, I assumed that it wouldn't show the antenna, such as moving after falling or something similar. I have never had any problem of high or low, such as the iPhone, not too hot or too cold. I tried to reset the network, put on the market settings and disable certain services that have been proposed to do in the forums, in many combinations different by trial and error-n method and even restored the iPhone throughout the system by default, and still nothing is resolved. I double checked the routers themselves, their settings and everything. All other devices are connected, with the exception of my iPhone (because cannot detect it). IPhone of my father (it's the same as mine) is also connected. BUT, as I said before, my iPhone cannot DETECT wifi networks.

  According to some scholars, put my iPhone in the refrigerator for 30 minutes and getting Wi - Fi working again, IS NOT a SOLUTION for me, because I don't know what could happen to the chips inside. In general, I do many reflow repairs to chips in laptops (made with success, of course), but this... I refuse to do it for a reason any.

  This is why I installed Apple Configurator 2, follow the steps below and save the file log and no information, it could be exported from the application. I don't know what else to do. Please if you could tell me what the log file (if the reason lies deep inside the info), as long as you or me to find a solution. I can't determine if it comes to iOS, or material. Even now, on the last version of iOS, the problem is not resolved.

  A VERY BIG THANK YOU FOR YOUR PATIENCE. PLEASE SEE WHAT YOU CAN DO. AN IDEA DIRECTLY FROM YOU WOULD BE USEFUL.

  ========================

  Steps, what is in the .log file is:

  1. turn off: Wi - Fi

  Bluetooth

  Use of data

  Activation: Flight Mode

  (in general, everything is turned off)

  2. TURN OFF THE PHONE

  3. TURN ON THE PHONE

  4 turn on: Wi - Fi, and Bluetooth, flight mode (off... dial-up cellular is enabled), use of data

  ========================

  PS: Here is the link of my log file (I have downloaded on my Dropbox account)

  < personal information under the direction of the host >

  Hi, this is a user to user forum only. I read your post and offer two comments. Please do not put your phone in the refrigerator, which is not an accepted solution. Secondly, iPhones are not intended to be served by our users. I know you've tried several of the steps below but please take a look at them again. If after #8 (restoration of new, not backup) the phone still does not work, your best choice would be to take on Apple Store or authorized dealer for evaluation.

  Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite A500-19W does not detect battery

  Hello

  I have a portable Satellite A500-19W which is 6 months old.

  I bought this laptop while I was in Egypt and now I've moved (Dubai) UNITED Arab Emirates.

  Lately my laptop started suddenly does not detect battery.

  To remedy this that I have to remove the battery and clean the terminals then re - put the battery and turn it on and it's OK.

  This happened twice this week and caused my data loss because the charger is disconnected (if the charger is connected, the laptop computer continue to work, but the battery indicator does not light up)

  Now, my questions are the following
  1 - is this problem under warranty?
  2 - should I pay for anything when getting this laptop in service in Dubai noting that I bought in Egypt?
  3. is there a cure for this problem without going through the service center?

  Thank you

  1 / Yes. These questions should be covered by the warranty. Material is junk.

  2 / the nearest service contact and ask, but I'm sure you don't have to pay for the repair. The two countries are countries in EMEA, and avoid any kind of problems.

  3 / it is not much, you can do about it so please contact and explain the situation. They should check your laptop and find a reason why this happens.

  Don t waste your time and contact the closest service. If you have need for addresses and phone numbers you can find on http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Click to call only to detect a number encapsulated in hyperlink

  I noticed that Skype to call does not detect any number on browser that encapsulated in the tag.

  It detects ordinary number, and I can use click to call.

  but not on numbers that currently into a hyperlink.

  is this in any way about this?

  I checked in chrome and firefox.

  using Skype click to call 7.3.16540.9015

  I highly doubt it because that would mean that it would essentially convert/modify an existing binding that really wouldn't make sense for me.

• Cannot pair phone NOKIA N78 / Satellite U505 Service detection failed

  After you run the wizard of BT, it detects the phone, but when the pairing is requested a * _ {color: #ff0000} error "failure of detection of Service {color} _ *" is always displayed.

  Pair phone to other devices such as headphones and a laptop ACER Vista successfully.

  Toshiba satellite environment is as follows:

  Satellite U505, installed the software factory, running 64-bit Windows 7 Home Premium, battery BT reports itself as version 7.00

  Ideas, sought after and some forums suggest to raise the security level, unsuccessfully, that and all the stuff in my bag (she holds a certain number).

  So my Iphone wife´s is all also detected but unable to pair as well. Suggestions please

  :-(

  Strange. I have European Satellite U500 and I can connect my LG phone successfully.

  Phone is detected automatically and the phone asked me to confirm the PIN. The PIN was shown on the screen of the computer laptop too. These two numbers are the same. I confirmed the PIN on the phone and the devices are automatically connected.
  After it, I've transferred all saved photos from the phone to the Satellite U500.

  I put t really understand what you're doing wrong. Open the help file for battery Toshiba BT if it pleases you and check if you can find help there.

• Satellite 1900 305 battery, need the pinout numbers

  I wonder if anyone knows numbers pinout of the details of the connection of the battery from the battery used with the Satellite 1900 305

  Mine has not been used for a few months and the battery is completely flat and is not supported.

  I want to check battery volts and check that there volts at the terminals in the computer.

  Martin

  Hello

  Unfortunately, there isn't any info on battery pin out. These documents are available only for the Toshiba ASP.

  But the battery charging is controlled by a microprocessor to power supply which is mounted on the system board. Power of orders by microprocessor if the accusation is enabled or disabled and detects a full charge when the power adapter and the battery are connected to the computer. The system charges the battery in charging or trickle charge.
  Normal load (power) 8 hours or more
  Fast (power off) charge about 4 hours

  Fast battery charge:
  When the adapter is attached, there are two types of fast charging: charging when the system's power off and normal load when the system is turned on.

  However, if the following occurs, the battery charging process stops.

  1. the battery is fully charged.
  2. the power adaptor or the battery is removed.
  3. the output or battery voltage is abnormal.
  4. the temperature of the battery is abnormal.
  5. battery SMBus communication fails.
  6. the battery cell is bad.

  In your case, it is possible to s that the batteries are dead, and you need a new battery.

• Keyboard Y550 numbers do not work after the Win7 update

  All,

  Thanks in advance for helping me wit HCet problem. I have a bought Y550 a few years back (read as out of warranty). It was shipped with Windows Vista and has been working well (especially) since I've owned it. I decided to upgrade to Windows 7, bought the upgrade software and run the upgrade.

  Following the upgrade, the keys do not work correctly. IF blocking issue is not engaged, no button works. If I commit number lock, keys working 7-0, but then the rest functions keyboard oddly. I restarted the computer in safe mode, and the keyboard works perfectly fine in safe mode.

  I guess it's a disk problem and not hardware related. The thing is, I seem to have the most up-to-date synaptic drivers loaded the Win7 upgrade.

  This is a strange problem and I hope that something that some people have seen. It made the laptop pretty unusable - numbers are important quite rudely...

  Thanks for any help,

  Cosmo

  All,

  Thanks for your help. It turns out that it was the bloatware GuardID seemingly does not well with Windows 7. In addition, Windows did not detect this program as a compatibility issue. In any case, as soon as I uninstalled the software, the keyboard said to work correctly. Thanks to everyone who helped, I appreciate it.

  Now, I must determine if Onekey recovery worth it - I really want to upgrade to an SSD...

• Detection of Sparkfun roll, pitch and yaw 9DOF, figure display in labview.

  Hi people, I realize now an average project sparkfun 9DOF to detect the movement of the roll, pitch and yaw, displaying the numbers in labview.

  However, I don't know how would be the connection of the pitch, yaw and roll.

  

  can someone guide me on how can I connect to show its height of yaw and roll?

  Thank you a lot =)

  Hi Sze,

  Download the sample of IMU program since this community page:

  https://decibel.NI.com/content/docs/doc-14911

  Then open the labview project called:

  IMUexample.lvproj

  Double-click the called VI

  TestVISerialIMU.vi

  Then you can start the experiment with the program/project that looks like this:

  

  The "Mode Select" can you use to switch between playback of a pre-recorded text file or read the VISA number of.

  Hope this helps? :-)

  BR,

  / Roger