Device not installed driver and will not be installed?

Similar Questions

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

  Windows XP DVD with Windows Media Player problem

  I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

  Try to download the utility "Windows XP video decoder check utility.

  It checks the ability of DVD to WMP encoder

• my external hd will not appear in my computer, it is in the device driver and says working ok

  my external hd will not appear in my computer.  It is in the device driver and work very well, and it shows in the hard drives and says working properly.      I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.

  Hello

  Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
  On the right side, make sure your external drive-> Rightclick and assign a drive letter.
  I hope this helps.

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• Is it possible to uninstall McAfree branch of vmware Fusion once installed?  My D: drive shows McAfree lnsigna and will NOT work?

  Is there anyway to uninstall vmware Fusion installed security McAfree?  My D: drive has lnsigna it McAfree and does NOT work?

  Is it possible to uninstall McAfree branch of vmware Fusion once installed?

  I'll assume that your question is in fact to return to the physical optical drive (rather than the image of McAfee), does not actually uninstall McAfee.

  Right click on the D: drive and eject it. Then go to the Virtual Machine > CD/DVD and select use physical disk drive. It is documented in the release notes to the title of "The rest McAfee antivirus ISO mounted".

• Code 39. Could not load the driver for this hardware device. USB, Audio and Ethernet. Œuvres's driver CD.

  Hello this is the first time I posted about people here so sorry if I get this thread a bit messed up, but to cut a long story short, I plugged in my USB iPhone and then the iPhone has crashed, so I had to uninstall iTunes, to complete the unistallation I had to reboot my computer on that next time that my computer started. My Usb drivers, Audio and Ethernet were no longer works. I tried a lot of thing to solve this problem, I downloaded the drivers and has moved across on a dvd and has not worked, I reinstalled the drivers, didn't work and I also moved my ram in a different solt because a friend told me that this could work. It did not help. I took a screenshot of the problem and transferred to it via CD.

  http://i30.Tinypic.com/ae32vk.PNG

  http://I27.Tinypic.com/2w4jy14.PNG

  When I put my driver of motherboard of the computer disc he also says 'Don't detect any good point. "

  I don't know what to do with this issue but it's really bugging me, any help would be Grateful.

  Thank you.

  I am currently using a:

  Card mother ASRock G31M-GS

  ATI 5970 Gtx graphics card

  On board sound

  2 GB ram cheap

  Windows 7 64 bit

  I just noticed that I posted this in the section wronf my bad for it.

  Zippers, I mentioned would be just compressed the executibles (EXE) versions. If you
  has ran versions EXE of the drivers for the NETWORK card and WiFi and were there any error messages?

  Download the Intel chipset drivers and install them - restart and then try the others.

  If no joy repeat the repair facility.

  Drivers for your computer would come from the machine system and various device manufacturers
  as Intel.

  You need to check on the site of the manufacturer of the system for your model, so you can get the basic
  drivers for the system. Be sure to get and install the Intel drivers for your chipset first.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Pavillion l 17-g192dx: not found boot device, please install an operating system on your hard drive.

  ProdID:V0Q01UA #ABA

  Hello, so I performed a reset that restore my computer to factory settings, I have chosen to erase all files. I've done this before, and everything went well. What was going on, it was my disc useage was at 100% a lot and that something was wrong with my computer then I factory reset it. While the factory reset is 44% in "resetting your computer" and the next thing I knew I had 2 options, stop or start with advanced options. Well, I chose to stop it, 5 minutes later, I turned it back on and I ran a SMART check has no that was the ID # 9367LW-86J89N-MFPX7G-60BR3 followed by the product id that is shown above. He said that when I start to Boot Device not found, please install an operating system on your hard drive. Followed by the hard drive (3FO), I can only click f2 and it gives me the link to visit the Help Center. The computer saying that it did not have an operating system was not the first alert, that I had, it was something else saying there was an error of hard disk which then became not having not not an operting system. I tried to go to f11 and go in this way, but regardless of what it always comes back to the screen that shows the found boot device, please install an operating system. Help, please! Thank you. in advance.

  He was sent to HP they will solve this problem, my warrienty coverd.

• My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed."

  Original title: Audio output device

  My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed." Any idea on how to fix it?

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of the manufacturer of your laptop > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Drive HP 248 PCI device not installed

  Hello!

  My laptop is hp 248 cell G1. It's an i5-4200U. I use windows 8.1

  I found that I have 4 PCI devices that have no drive.

  I tried to get on the line, but no disk does.

  I tried toubleshooting as well, but the problem remains.

  The location of the 2 lack of PCI devices are respectively

  Location: on PCI Express Root Complex

  Location: Bus PCI 3, device 0, function 0

  Here is the message I received.

  The drivers for this device are not installed. (Code 28)

  There is no compatible driver for this device.

  To find a driver for this device, click Update driver.

  Can someone tell me what I can do to find comparable to these devices disks?

  Thank you!

  Hello:

  You need this driver for smbus controller. Install and reboot.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123677_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  USB\VID_138A & PID_0050:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125839_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  ACPI\HPQ6007:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127112_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl

• my lap top says device not found Boot please install an operating system on your hard drive

  I was on yahoo and page froze. I hit ctrl/alt/del and nothing happened. Then, I hit ctrl/esc. I now have a screen saying device not found Boot. Please install an operating system on your hard drive. hard drive (3FO) what hurts? It is a Compaq presario CQ56-112 NR computer laptop Windows 7

  I suggest go on the link following and through the listed troubleshooting steps based on your symptoms:

  http://support.HP.com/us-en/document/c01443371

• Windows has blocked a potentially dangerous file and will not allow him to ti be installed from canon printers

  Windows called a potentially dangerous file and will not be installed, it is from the canon printers, how can I install it?
  Windows has blocked data access cab 1

  Hello

  1. which version of the operating system you are using on the computer?
  2. What is the accurate and complete error message that you receive?
  3. have you made changes on the computer before the computer?
  4. are you trying to install the printer software\downloading turn off the internet?

  Method 1:
  You may need to download the correct driver\software from the manufacturer's website only.

  Method 2:
  You can perform the clean boot and try to install and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can disable the security software and check
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Service Pack3 attempts to install on my C drive but my main drive is the D drive and I get the response "not enough space on drive C to install this update"

  I had to recover my computer and when I reinstalled Windows I chose D drive and normal drive (C) now is the HP recovery disk.  The update

  do not give me a choice to have the download go to the D drive.

  You receive error messages if there is insufficient free space on the system drive to install Windows XP SP3
  http://support.Microsoft.com/kb/956894

  How to recover disk space on a computer running Windows XP with a hard disk of 4 GB or less
  http://support.Microsoft.com/kb/956324

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  [[Less likely...]]

  Error message when you try to install Windows XP SP3: "you don't have enough disk space on % lecteur_systeme % to archive the uninstall files.
  http://support.microsoft.com/kb/949375 ]]

  =============================

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! =>  No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid!) when Windows is reinstalled. You MUST uninstall the trial AND THEN download/run the appropriate removal tool before installing updates, Windows Service Packs or IE upgrades AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

• just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  Vista Home premium 32-bit

  Hello

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ABon the Defender being turned OFF

  With MSE installed Windows Defender is supposed to be disabled.

  MSE has been designed with its own version of Windows Defender under its own program.

  If the two were running, it would cause system conflicts.

  See you soon.