Devices NDMP restore failed

Similar Questions

• Acer aspire s7-392-9439: lack of default boot device or startup failed.

  Hello
  I bought an Acer aspire s7-392-9439 3 months ago. It has been working fine, until yesterday.
  I turn on the computer and it poped a blue screen with the error: 'lack of default boot device or startup failed'.
  This error reminded me that a message on a bios updated poped over a few days and I have the chance to install it.

  I contacted acer support, I was told that the update of the bios would have avoided this problem. Also, they told me to try things that can help, but unfortunately none of them has:
  1 restore the default bios settings.
  2. change the bios settings: uefi to legacy.
  3 type the Windows key + c when the computer starts.

  When these options do not have they said it is probably a hardware problem and I should send my computer to their repair center.
  My questions are:
  1. If they updated bios would have prevented the problem, how can it be a hardware problem?
  2 - does anyone know how to solve the problem?

  I would appreciate your help,
  Michael

  I had the same problem.  Tried the diskette of starting BACK and did not work.

  Here's how I solved it:

  (apologies to memory are some terms is not on-site)

  1. download the Setup file of the BIOS - link provided above in this thread (isST2212.exe)

  2. on a Windows 8 machine that works - search for 'Create a recovery disk' and run on a USB drive

  3. copy the file #1 to the USB drive once it's done make a recovery disk

  4. in the Acer BIOS (press F2 during startup), change to the method of priming of the legacy

  5 save and exit

  6. turn in the BIOS and move the option USB HDD as first boot device

  7. Save and exit

  8. you will end up in a Windows 8 recovery console

  9. go to Advanced Options - find the option that leads you to the command prompt

  10. from there I went to d: drive and found my file isST2212.exe - run by typing the file name when you are in the folder

  Make sure that you are connected to power - let it run.  It should install, automatic restart and you should be in business.

  I had an Acer offer to fix it for free with a 7-10 day turn around and at the risk of losing all my data.  It's a much better solution!

• "Restore failed, error Code 1117

  I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased.  I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error."  I can get nowhere excpet the F2 screen, so I don't know what the problem

  Hello

  ·        You did changes to the computer before the show?

  ·        You are able to boot to the desktop in normal mode?

  Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:

  CHKDSK X: /R

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: Startup options (including safe mode) advanced

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: follow the instructions from the link to fix the problem:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• BlackBerry OS Q10 restoration fails wireless link and more

  I support the mobility for my business.  I got a BlackBerry Q10 what a user has failed to activate. When I tried to connect to the link to restore the operating system, I received a message stating that Setup was not completed on the device, unplug and full to the top.

  I have disconnected, went up to the game and received only a ghost '10' background screen BlackBerry, similar to what you get when you first restart the device.

  I tried to go into the settings to wipe the device, as soon as I select the settings, I went back to the home screen.  Even if I try to drag down and select settings.

  I tried to make the method described at BlackBerry.com/support, using Internet Explorer and receive the same "set up is not over."  Disconnect the device... "message.

  How to get to this device resets, restored, wiped, no so I can get the user put in place?

  Hello

  From what you describe, the operating system on this device is badly damaged and normal means will not work for her. I recommend that you use an autoloader to reload the OS for the device itself:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  Good luck!

• Unknown USB device (device application descriptor failed) Code 43

  my internal cam has stopped working, I worked on almost everything what I found in the internet

  disabled drivers and restarted

  uninstalled the usb ports on the Device Manager and rebooted again

  I get this error message in the Manager of devic

  name:

  Unknown USB device (device application descriptor has failed)

  Device status

  Windows has stopped this device because it has reported problems. (Code 43)

  A request for the USB device descriptor has failed.

  Geographical area:

  Port_ #0001.Hub_ #0004

  Status:

  Device USB\VID_0000 & PID_0002\6 & e2f2cee & 0 & 1 had a problem starting.

  Driver name: usb.inf
  The class GUID: {36fc9e60-c465-11cf-8056-444553540000}
  Service:
  Lower filters:
  Upper filters:
  Problem: 0x2B
  Status: 0x0

  Hi waly,.

  Thank you for the information. I suggest that you unplug all USB connections and refresh your laptop. Then try to use your webcam. I think that the problem with the USB connection that gives you the error and not your webcam. Here is a document on how to update your PC to solve problems (Windows 8).

  If you are still experiencing a problem with the webcam and then one of the documents in the previous post should help now. Any stage of document Windows 8 will be the same for Windows 8.1.

  I'm also including this document how trouble Code 43 errors that will help determine which USB product causes the error to appear.

  I hope that this information help, please let me know how it goes.

  Good luck and have a great day!

• Panic the kernel with MCO HDA REGISTRY RESTORE failed

  Hello

  My macbook constantly restarts and does a KERNEL PANIC when the graphics edge R9 IRIS Pro Tips.

  Is this a hardware problem?

  Thank you very much for your answers.

  Panic report *.

  panic (cpu 4 0xffffff7f89d985ba appellant): "MCO HDA REGISTRY RESTORE FAILED: rdar://7254528, had BAR0 invalid"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphi csControl-3.12.6/src/AppleMuxControl/kext/AGCPowerManagement.cpp:1196.

  Backtrace (4 CPU), Frame: Return address

  Take it for a health check. Bring a copy of the panic report in its entirety.

• Vista Start black normal & all Security Modes, restore fails, screensaver ŒUVRES

  Yesterday (18/06/09) I installed a few new updates, but is not a restart.  Today, the system was sitting idle (, but nobody use it) and we had a power failure.  Restart the system wanted to make a volume control.  During the audit, he found a bunch of bad index entries.  The files went flying by pretty fast, but I could tell that many of them had something to do with Media Center.  Then later in the repair of the volume, she added a bunch of orphaned files.  I couldn't give a sense these files because all the entries were similar to Hex IDs.

  So that brings us to today.  The system starts with black screen with a mouse pointer.  System knows I have 2 monitors connected & I can move the mouse between the two monitors.  With the help of other boots (via F8 in the boot menu) produced similar results, except in safe mode boots, the system does not know the 2nd monitor.  CTRL-ALT-DEL does nothing.  (Do NOT bring up the Task Manager.)  The SHIFT key to display the Sticky Keys dialog box.  After a while, the screen saver turns on.  With screensaver KB/mouse activity outputs and system back to black screen.

  All the security startup black screen Modes.
  Low-resolution video starts with black screen.
  Black screen on startup of the diagnostic Mode.
  Directory Services Restore Mode reports all my disks are clean and black screen on startup.
  Sleep key works.  Wake up, the system returns to black screen.

  OK, here's a little recap... BLACK SCREEN!

  So next I tried the repair your computer...

  Log in to my account admin OK.  Then I tried to Startup Repair which could not detect a problem.  Then I tried the system restore.  System Restore is all my restore points registered in April ' 09.  System Restore Gets an error and fails to load any restore point.  I have two different messages depending on what point of restoration, I try.

  2 most recent restore points are of yesterday and today and the updates, I just installed but never rebooted before the power failure disk check.  When I try these 2 restore points, I get the following:

  The configuration register is corrupted. (0x800703F1)

  If I try the old restore points, I get:

  Cannot open the file transactionally, because its identity is function
  on the outcome of a transaction not resolved.  (0x80071AA7)

  Reading through the error of this last web messages makes me think to there is a bad dependency in the update / restore of the system process.  If pending updates become corrupt, old restore points will fail.  Is this true?
   
  I can boot from a CD-ROM of 3rd party and see my programs and data on the disk.  I did a full inspection, but it seems that all of my stuff is still there.

  So finally I tried to reinstall my Vista system, and my only option is to replace my entire system.  The update option is grayed out.  I used to be able to do a re-install/upgrade to update in the old days (XT & before), but it seems that it's not possible with Vista.  It would be great if I had my old system before SP1, and then I could re - install SP1 & all of my updates.  But it would be impossible for me to recreate my 1 TB from scratch system.  Simply, I have enough DVDS to back up a lot of data.

  Is there a solution to my boot at the digital black problem, or I'm really screwed?  A reasonable solution is much appreciated.

  ==============

  UPDATE...

  I can access shared folders on the blackened on Vista machine.  I created my user account on another computer (Win XP) and am also able to access all my user files.  In addition to the screen saver and the sticky keys work, it seems that file sharing works also.  However, the printer share and office remotely (using Ultra VNC) do not work.

  Hey Ken, I just reread your post previous and tried your procedure.  Are your steps to perform a repair install on Windows site:

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now .

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license .

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note : If your installation disc doesn't include SP1 , and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates , then select Service Pack for Microsoft Windows and click on Uninstall.

  Unfortunately, I'm stuck on the first step.  Start a Windows installation when executing my existing version of Windows when my existing version of Windows starts with a black screen, and the only interaction of console, I am able to do what a screen saver and the Sticky Keys dialog box?  What is the trick to start installation?  I can't find.  Is there a way to launch the installation with the keys dialog box to sticky?

  In addition, in the case where I, how to uninstall SP1 from a black screen?  The dialog box of the sticky keys which they as well?

  I know that other messages that other users could not bring up the Task Manager with CTRL-ALT-DELETE.  As I said in my original post, I can't do it.  THE ONLY THING THAT WORKS FOR ME IS THE STICKY KEYS DIALOG BOX.  So I do not buy any version of Vista at all costs will have what I need because Windows Vista just can't do a re - installed on-site if your Windows Vista is not running after a black screen.  Right?

  I'm getting very frustrated and would be very grateful for any help.  I just can't figure how to get the computer do anything when the only thing it starts is a black screen.  And none of my restore points can be restored.  I thought that the system restore has been the goal of the restoration of the system.  Why my Vista system locks my system restore? I don't understand!

  I think that this last update not to not fill properly and locked up my system.  Is it possible for me to undo than a black screen or a Setup disk?

  BTW, Western Digital diagnostics transmitted without error.  Then at the command prompt on my Vista disk, I ran chkdsk and it fixed some files.  I think they were just left by a system restore failed.  So I ran sfc from the command prompt using sfc/scannow damaged = c: \ /offwindir = c:\windows.  He ran for a while and there was no violation of integrity.  If the drive seems fine.  Are there tools that can help me find the problem?  Is that what I can do to restore the registry to an earlier time manually?

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• PIXMA MX340 Windows 10 device descriptor request failed Code 43

  Hello.  I recently bought a new computer to office 810 - QE HP Envy Phoenix yesterday.

  The first thing I did was to finish the free update on a clean slate ("save anything") of Windows for Windows Professional 10, 64-bit edition 8.1.

  The specifications of the system are:

  32 GB RAM DDR3
  3 TB hard drive 7 200 RPM SATA
  Integrated Realtek / Beats Audio
  Processor Intel Core i7-4790 3.6 GHz 4 hearts

  NVIDIA GeForce GTX 745 4 GB DDR3 video card

  My Canon Pixma MX 340 multifunction printer is not able to be recognized by this new system.  I installed the software and drivers for the printer, however, Device Manager keeps telling me that this printer is a "unknown USB device: device descriptor request failed, code 43"  I also tried to download the latest drivers directly from Canon specifically list of compatibility with Windows 10, which did not help me at all because the drivers are not able to find the printer during the installation.

  I had originally this printer connected to one of the USB ports 3.0 at the back of the system, but I have also tried using this printer with the USB 2.0 ports, as my old system had USB 2.0.  No change, it still gives the same exact error.  I also tried this printer connected directly to the USB 3.0 and USB 2.0 ports on my computer without effect before.

  I checked to see if this printer is "compatible" with 10 windows, and according to the compatibility of Microsoft website, it says that the Pixma MX340 should compatible.

  Advice, tips or suggestions would be very appreciated.  Thank you.

  I FOUND THE PROBLEM.

  I forgot that not only I used an extension USB cable, but I was also with a long USB cable and the USB extension as well.  This long USB cable was the culprit!

  I just noticed this and decided to test it.  With the long USB cable, I get the error. But when going back to a standard length cable, the printer was correctly as a Canon MX340!

  If I switch back to the long cable, it will be impossible to find.

  However, I can still use the USB extension cable.  This cable does not cause a conflict any!

• restore failed - cannot find image path path:c:\images_tmp_dir\install.wim HELP my old crushed drive

  my old drive crashed bought a new and the 5 CD to recover at acer until I installed the cd, that I could get in the bios. Now nothing and I still get the evertime following error, he manages at the end of the installation of recovery disk 3

  restore failed - cannot find path:c:\images_tmp_dir\install.wim image path

  I used Rufus and yes I changed my BIOS, but I had read I need to change the format of my flash to fat64 which I just did, now I'm a new attempt to restore the ISO.  I'll let you know if it works.

• Restore failed - error code = 0 x 241

  I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the third, I get an error message that says "restore failed - error code = 0 x 241 (WIMApplyImage impossible to apply the image: Windows cannot verify the digital signature for this file.). A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that could be... "The rest is obscured by the box and you can't scroll to read.

  I've read several posts that say they had the same problem, but have yet to find a real solution. I completely cleaned the disk and did a 'Clean' on diskpart with a Win7 repair disc. It is possible that the disc is damaged, but with the accounts that I have seen, I would not buy a new drive and then find out that the drive wasn't really the problem.

  I could really use some suggestions. Help, please.

  Thank you

  I think I finally found the problem. I tried to install an evaluation version of Windows 8 and got a slightly different, but the similar error message and google it. The first instance of the problem that I found was a solution, saying that the guy has discovered that he had a bad memory stick. I removed one and retried the recovery disks and it always failed. I swapped the memory stick and tried again, and now I'm almost finished with the full reload. I think that was the problem and I'm hopeful that we're back in business... Now to make shopping for memory.

• Desktop appears again without any data. System restore fails to «incomplete system restore»

  Original title: System Restore failed

  My computer turns off on its own yesterday. After the reboot, my office was back to default settings. Everything that I had stored on the desktop disappeared and I also lost all my favorite places. I tried restoring the system using different dates but it said system restore incomplete. I've lost everything?

  Hi mike,.

  ·         Have you received any messages when the computer starts very well?

  ·         Your data is also missing?

  ·         Do you have any other user accounts on the system?

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  See also:

  Abnormal termination can affect the system restore

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• can't connect now system restore failed - reason 0x000001d click OK to restart the computer.

  Original title: restart my vista erros, can't connect now system...

  I have the product key of windows vista edition Home premium... When I restart my laptop, it is clear that restore failed - reason 0x000001d click OK to restart the computer.

  I can not connect the system as well as the security model. When I turn on the screen shows BOOTMGR IS MISSING press CTRL + ALT + DEL TO RESTART. He appears again any reboots it.

  The only thing I can do is the connection configuration of the bios.

  What can I do next?

  Thank you

  Hello

  See the following article:

  Windows Error message "Bootmgr is missing Press Ctrl + Alt + Del to restart":

  http://support.Microsoft.com/kb/2622803

• System restore failed, registry damaged, signature of the problem 07: O, s is not installed

  It, s a Dell Vista. (Initially WINDOWS 7). Does not start. Comes with Startup Repair tool.

  System restore failed, damaged, registry problem Signature 07: No O, s installed.

  Choice 1 or q: beep.

  Check memory problems: no problem dedected, goes back to the Startup Repair

  Help

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. How have you tried to do a system restore?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  Method 2:

  Check the link and see if it helps:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Let us know if it helps.