Devices not identified in Satellite U300

Similar Questions

• USB devices not seen on Satellite Pro A60

  Hello

  I'm having a problem with my laptop Satellite Pro A60 running Windows XP Home: it is simply not to see all devices at all. Devices (USB, fan keys) are to be supplied with electricity, but I can find no trace of them on the computer anywhere. It is even not complain that they are not recognized - it's as if they were not there. I've uninstalled and reinstalled the drivers of hub USB root/controllers, but that has not helped.

  It is the latest in a string a glitches that can be helpful to know: a few weeks ago, the ATI Mobility Radeon 7000 IGP suddenly caused windows crash at boot time. I could just sort the problem by updating the bios and reinstall the ATI drivers (all toshiba). It is not of course the relevance, but after the bios update I also improved the 6 F-secure antivirus software. XX to 7.01.

  Usually, I try to get as much as I can by reading these forums but I'm not a guru of computing and on this one, I'm out of ideas - because Windows is not identify any fault, I don't even know what to look for on google... Someone has an idea?

  Thank you very much

  Philippe

  Hmm, you said that you have already reinstalled the drivers of USB controllers/root hub.

  But maybe you should try to make this again as a result of this procedure;
  -Disconnect all USB devices
  -go to the Device Manager and change the view to display hidden devices.
  -Open the tree of the USB controller and remove all controllers.
  -Restart the computer and wait until the OS has installed everything again.
  -Then plug the USB devices to the USB ports for laptop

  If this does not help, it would be desirable to recover the laptop with the Toshiba Recovery CD supplied.

  Good luck

• Sound does not work by Satellite U300-102

  Hello

  Sound of my laptop does not work, microphone or speakers. Before yesterday they had worked. It had happened before, but I did a restore of Symstem each time to 10 Jan, and it worked.
  Now I only have until January 13 restore points and I tried all, but they do not work.

  After that, I used the last restore point and installed all Windows updates. Still did not work.

  Then I changed the default BIOS Setup. Still did not work.

  I tried to install the following drivers of toshibas page: Realtek audio driver, BIOS flashing, hardware Toshiba, Config Free, Intel display, chipset Intel SW.
  It still does not.

  I'm downloading all the drivers that are in the toshiba page.
  Can someone help me make my sound work? It is really important.

  Thanks in advance.

  And what is the status of the device in Device Manager?
  Some hardware component is listed as unknown?

  When you start a player with mp3 file is at - it an error message?
  Have you tested with headphones?

• Need recommendation about the hardware upgrade - Satellite U300-130

  Hello seniors and technical experts.
  I have Satellite U300-130 notebook. Then I put my Satellite U300-130 with 4 GB of DDR3 RAM and also I cannot add new hard drive. I mean I have 2 HDD in my laptop. Please need advice because I am not a technical person.

  Hey Buddy,

  I agree with the user above. You can use up to 4 GB of DDR2 RAM in your laptop, new DDR2 modules are not possible. I have good experiences with the manufacturing of Kingston.

  As far as I know Satellite U300 doesn t support two hard drives are not possible in Satellite U300. You can only exchange the current model with a bigger. ;)

• Printer appears in devices not specified

  I connected a zebra printer to my Windows 7 machine via a USB port. The printer appears in the devices not specified.
  I went there web site and got the latest drivers and install them. The printer appears in the printers section and works very well. However, the printer still appears also in devices not identified and there is no option to remove it. When the printer is turned off to it disappears to reappear when turned on again.
  I saw another problem with several items of the same type, but no resolution has been published.

  I have the same thing with a HP printer that has no Windows 7 drivers.  I can easily print using compatible device drivers.  I think that if you really need follow this look down in the \windows\inf\setupapi.dev.log file and locate the section where the Plug and Play install fails.  Then find a zebra driver that contains the same data HardwareID and install this driver.  If the Zebra does not a driver that contains the HardwareID the device sends to the operating system, this device is in the correct state.  You can still use the printer, because the spooler service does not require a HardwareID of the device while PnP requires the HardwareID match.

  [Set device (hardware insider) - DOT4PRT\VID_03F0 & PID_3C02 & REV_0100\7 & 2B486CDE & 0 & 1]
  > Section start 14:31:42.297 23/12/2009
  UMP: creating the installation process: DrvInst.exe 14:31:42.317
  NDV: device information retrieval...
  NDV: definition of the parameters of the device...
  NDV: driver store just to research...
  DVI: {list of pilots Build} 14:31:43.058
  DVI: looking for the hardware ID:
  DVI: dot4prt\vid_03f0 & pid_3c02 & rev_0100
  DVI: dot4prt\vid_03f0 & pid_3c02
  DVI: vid_03f0 & pid_3c02 & rev_0100
  cpy: policy is about to make all equal digital signatures.
  DVI: enumeration of the INFs from the list of paths 'C:\Windows\INF '.
  INF: wanted 0 potential corresponds to the INF directory published
  INF: searched 54 INF files in the directory: 'C:\Windows\INF '.
  DVI: {build the list of drivers - exit (0x00000000)} 14:31:44.260
  NDV: by selecting the best game of any driver store...
  DVI: {DIF_SELECTBESTCOMPATDRV} 14:31:44.270
  DVI: no installer class to the series HP Photosmart 7350 "printer."
  DVI: no CoInstallers found
  DVI: Default Installer: enter 14:31:44.280
  DVI: {choose best driver}
  !    DVI: selection pilot failed (0xe0000228)
  DVI: {choose best driver - exit (0xe0000228)}
  !    DVI: default Installer: failed!
  !    DVI: error 0xe0000228: there are no compatible drivers for this device.
  DVI: {DIF_SELECTBESTCOMPATDRV - exit (0xe0000228)} 14:31:44.340
  NDV: searching Windows Update for drivers... 14:31:44.660
  NDV: WU research serialization mutex acquisition. 14:31:44.670
  NDV: on the point of release the mutex of serialization search WU. 14:32:08.044
  NDV: no driver is not found on Windows Update. 14:32:08.094
  NDV: search driver store and the path of unity...
  DVI: {list of pilots Build} 14:32:08.204
  DVI: looking for the hardware ID:
  DVI: dot4prt\vid_03f0 & pid_3c02 & rev_0100
  DVI: dot4prt\vid_03f0 & pid_3c02
  DVI: vid_03f0 & pid_3c02 & rev_0100
  cpy: policy is about to make all equal digital signatures.
  DVI: enumeration of the INFs from the list of paths 'C:\Windows\inf '.
  INF: wanted 0 potential corresponds to the INF directory published
  INF: searched 54 INF files in the directory: 'C:\Windows\inf '.
  DVI: {build the list of drivers - exit (0x00000000)} 14:32:09.116
  NDV: by selecting the best match to the driver (including the way to unity) store...
  DVI: {DIF_SELECTBESTCOMPATDRV} 14:32:09.126
  DVI: no installer class to the series HP Photosmart 7350 "printer."
  DVI: Default Installer: enter 14:32:09.136
  DVI: {choose best driver}
  !    DVI: selection pilot failed (0xe0000228)
  DVI: {choose best driver - exit (0xe0000228)}
  !    DVI: default Installer: failed!
  !    DVI: error 0xe0000228: there are no compatible drivers for this device.
  DVI: {DIF_SELECTBESTCOMPATDRV - exit (0xe0000228)} 14:32:09.196
  NDV: 14:32:09.206 {core device install}
  !    NDV: installing NULL driver!
  DVI: selected driver complete Set. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Satellite U300-152 - no audio output device is installed

  The sounds are works well when I do update windows, update antivirus and updated some software like adobe air and adobe shockwave but when I open the laptop the next morning, there is a red cross marked in the speaker icon on the lower right of the laptop and it says : "no audio output device is installed".

  I couldn't find the sound and game controller in Device Manager so I'm frustrated. Its been 3 days now, I use the laptop without noise.

  Can you please help me in this matter?

  My laptop is Toshiba Satellite U300-152
  Windows 7 Ultimate but not pre-installed (Vista Home has been the pre-installed)

  I tried to download the latest audio driver from realtek high defintion, but its still does not. Tried several restarts, System Restore, disable antivirus but does not yet.

  I don't know what can be the problem but the fact is that updates Windows update offers some drivers and, in general, you should not install their Mr. with other words, you should only use the drivers from Toshiba.

  What can you do now? Have you tried to reduce the OS to an earlier time (before installing updates) and check the functionality?

  One last thing. Software driver Sound should start with Windows, then please check MSCONFIG > startup if the sound software is listed and enabled it.

• No audio output device is installed on my Satellite U300

  I have a Satellite U300 running under Windows Vista 32. The sound worked fine until last week.
  But now I have a red x on the speaker icon in the taskbar. I tried to reinstall the Toshiba/Realtek driver but the sound is not restored.
  (At least the driver Realtek now present in the control panel under 'Sound' - he had nothing before.) I also tried Windows updates and especially KB 92 96 85 since that was recommended on another forum. It made no difference. If I go to Device Manager, no sound is listed.

  Someone at - it ideas? It seems to be a common problem with Toshiba Satellite and other brands, and I'm surprised that there is nothing in the forums here.
  Thank you

  Some unknown device is listed in Device Manager?

• Satellite U300 - 13K usb 2.0 camera Chicony driver will not install on vista 32

  My Toshiba satellite u300 - 13 k has windows vista Home premium 32-bit. I can't install * driver chicony usb 2.0 camera is not install *. I get the error "Windows has encountered a problem installing the software driver for your device." Required section was not found in the INF.* Please help...

  Hello

  Hmm never saw this error message during the installation of the webcam driver.
  Have you downloaded the package again and you uncompress it before installing?

  Please also check out webcam software other models of laptops as Satellite U400

• Audio driver does not not on Satellite U300-30F

  Hello.

  I have a satellite U300 - 30th.

  Audio driver worked well but it suddenly stopped.

  NO AUDIO DEVICE appeared in the lower right of the task bar.

  In Device Manager the REALTEK HIGH DEFINITION AUDIO comes with a warning yellow (this device cannot start. (Code 10))

  Any ideas - tried to reload the latest drivers from the website of Tosh & realtek, but no difference.

  Is it a VISTA problem or a problem with the on-board his?

  Thanks in advance

  Lynda

  OK, have you done a clean uninstall using a tool like ccleaner to clean record? Should be worth a try.

  And no, this is not a specific problem of Vista, as this seems to happen on Win XP too.
  The last thing that you have is to do a complete reinstall of your system, but let's try this method first, before doing this.

• Satellite U300 - 111 - device with problem of code 10

  My cousin has a Satellite U300-111 and she is having the problem of code 10 "this device cannot start.
  It formatted his cell phone, and then the noise disappeared. She tried the soundcard that she found on toshiba.com but nothing seems to work. !

  Could someone find us please a solution coz, she is really give up now?
  Thanks in advance

  Hello

  Your message is not clear
  You said that the laptop has been formatted Ok have you installed all the drivers from Toshiba?

  You must use the European driver of Toshiba page to download driver.
  The laptop seems to belong to the PSU30E. You should choose exactly this model in the form of download number.

  But these drivers are only required if you have installed a clean Windows operating system.
  If you use the Toshiba Recovery CD/DVDs you n t need the drivers because the image already contains the Toshiba drivers.

  Concerning

• Satellite A135-S2356 - BIOS will not identify SATA hard

  Hello everyone, hope you can help out me.

  Got a Satellite A135-2356 opportunity, everything seems fine but BIOS will not identify SATA HDD, shows no disk BIOS downgraded to 1.30, not good, upgraded to 1.40, not good. BIOS has no change/test/detection of HDD/SATA settings options. Tested the drive in another laptop and it reads very well. Received the Toshiba (Vista Basic 32) recovery CD, but given that the BIOS will not read the disk, can't do anything. Cleaned contacts, not good. This HARD disk must be too large, or something for the Board of Directors.

  * Hitachi HTS541612J9SA00 120 GB SATA, 5400 RPM *.

  Thanks for the help!

  Hello Richie

  To be honest, I do not think the disc is too big for your laptop. I can imagine that your laptop can handle with drives of 160 GB too. Unfortunately there is no public document on the possibilities of HARD drive upgrade. I can imagine that ASP in your country has information about such things.

  It's also quite strange that HDD is not recognized correctly. Long ago, I had the same problem. Every time when I used F12 at startup disk HARD were not as boot device. Solution in my case was to upgrade the BIOS to the default settings. I believe that your BIOS has already the default settings, but try to do it again.

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite U300 - point of yellow exclamation on the Base system device

  I have a Satellite U300 PSU30E Windows XP, SP3.

  After installing iTunes version 8 and after I rebooted, I get a popup that a new device has been added.
  The "device wizzard" fails to locate the appropriate drivers and I get relevant messages that the appliance could not install and so on. ""
  The system seems to work very well.

  In Device Manager I see that, under the family of controllers IDE ATA/ATAPI devices, I have a yellow exclamation mark next to "Base system device". All devices IDE ATA/ATAPI controllers tree appear in good condition. The family tree of device is:

  -IDE ATA/ATAPI controllers
  --- (!) Base system device
  -Intel 8280 1HEM/HBM SATA AHCI Controller
  -Intel(r) ICH8M Ultra ATA Storage Controllers - 2850
  -Main channel IDE
  -Ricoh SD/MMC Host Controller
  -Ricoh xD - Picture card controller
  -Secondary IDE channel

  The machine seems not disabled on any topic, but I get the 'new device' message every time I start up as well as the routine "cannot install device.

  No idea what kind of device is that 'base system device' in the family of the IDE controllers?
  I reinstalled the drivers of Intel chipset to no change in the status of the device.

  Thank you very much!

  What happens if you remove iTunes8?
  You have the same problem after that?

  It is really strange, but maybe it has something to do with the upper and lower filters. The point is that if you install the CD/DVD software, they install filters in the registry that can cause compatibility problems.
  So follow this work around and post your result:
  http://support.Microsoft.com/kb/314060

• Strange devices satellite U300-15 after the new installation of 64 bit Vista

  I just got my Toshiba Satellite U300-159 (model No. PSU30E-07901NN5)

  It was a display model used in the store where I bought, so I wanted to do a clean install.
  Using the recovery cd did not work. (Something about some files than couln can't be read).
  It is a really bothers me not at all because I want to run it with a clean Vista anyway, so I jumped into a Vista Home Premium 64-Bit UK + SP1 and installed it.

  After that the installation was done, I ran windows update to get a little more drivers for the few items that not have installed correctly.

  After that almost everything worked very well.

  Except:
  I had two entries in the called Device Manager device Base System. They are found under 'other devices '.
  I have looked around the site of toshiba for the drivers, but can't find anything that seemed as if it was the thing that I was missing.
  (Actually I'm not sure I've found the correct support page. I learned to http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp and was able to select 3 versions of U300. U300 - ST3091, ST3092-U300, U300-ST3094)

  Everything on the PC works well: card reader, bluetooth, graphics card, wireless + LAN cable, keyboard shortcuts, sounds etc.
  The only thing that is not working is when I put it in mode "Eve". The screen goes black, the powerled stays on and the fans continue to operate. It is not possible to bring him back again if.

  Does anyone have an idea where to find these drivers?
  Or maybe just sort the problem of sleep difficulty?

  I reinstalled using the recovery CD and choose another language and thus skip the defective cd.
  But the sleep problem was still there.

  An update of the bios, mentioned in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=32002&tstart=15 solved the problem.

  I have always an idea that both devices are well...

• Satellite U300-151 - SD card slot does not

  I have the Toshiba Satellite U300-151 (PSU30E-074017AR) model that follows the
  SD card slot not working do not I have install windows XP SP 3, & is installed 100%, I need to fix this...

  Please chk this link:

  Hello!

  What do you mean with her does not work?
  The computer recognizes an SD card?
  The card reader is listed in Device Manager?

  As a first step, you must update the SD card driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye