Devices not recognized when connected to itunes from a PC. Recently upgraded to windows 10 and appears there is no driver

Similar Questions

• USB device not recognized when connected to the computer

  original title: USB port problems

  When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

  Hello

  ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

  ·         Remember to make changes to the system?

  ·         It happens with all USB devices that try you to plugin for the system?

  I suggest running the fix which is present in the article below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Also, I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• USB device not recognized when connecting to printer

  Hello Microsoft,

  Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

  Hello Dhruv,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the complete model of your printer RICOH SP 100 number?

  Thank you for details on the issue.

  This problem may occur because of settings and corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Please also run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Controllers USB reinstall and check the issue. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  (b) in Device Manager, expand 'USB Bus controllers'.

  c. right-click any device under "Controllers of Bus USB" and click Uninstall.

  d. repeat the same steps for other devices.

  e. Once completed, restart the computer.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• USB device not recognized when connected to Toshiba Port Replicator II

  I recently bought the Replicator above, loaded the software, restarted my computer and only then connected the device according to the instructions.

  I get the error message "unrecognized usb device".
  When I go in my gear and check for driver for this device 'unknown' told me that no drivers have been shipped for her

  So my Replicator does not.
  I deleted the software and reloaded with the same result

  I have a laptop Tecra A8 running Windows XP Service Pack 2
  Any help or suggestion would be appreciated

  As much I know PortReplicator II only is not supported for Tecra A8. According to the sustained specification is Port Replicator III + only.

  If you try to use the option not supported, it is not easy to give any help.

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  The following versions of Microsoft Outlook are fully supported on Windows 7;

  • Outlook 2003
  • Outlook 2007
  • Outlook 2010 (when it came out)

  It is recommended to always update your version of Outlook directly after installation to take care of any question of incompatibility which have been corrected.

  Previous versions
  Another version of Outlook is not supported on Windows 7. Although you may install it, any compatibility issues is not corrected. For example;

  • Outlook 2002/XP works on Windows 7, but it has the same problems remember password when using Windows Vista.
  • Outlook 2000 cannot be installed in Internet Mail Only Mode (IMO) and must be installed in company/workgroup (CW Mode) Mode to prevent a mistake wab.dll.

  The info source:
  http://www.MSOutlook.info/question/303

  t-4-2

• USB device not recognized when I connect my iphone to my computer

  Original title: USB device not recognized

  I get the error message "Unrecognized USB device" when I connect my iphone to my computer.  It is the same as the one I use for months.  Same computer.  Same sync cable.  I have changed everything, including hang iphone to my wife instead of mine and get the same message.  I also did a restore on my computer that doesn't change anything.

  Hello

  At this point, I think it's a good idea to run a scan for viruses/malware on the PC with the anti-virus software that you have installed.

  Also, if you haven't already, I would try removing the USB controllers and restart again, now that the updates of Windows are installed. Don't forget, you can even download the drivers directly from manufacturer support site for your PC, if they install automatically when you restart after their removal.

  Finally, take a look at the thread I linked below. The first answer is quite similar to that mentioned above in this thread, but there are also a few other really good measures listed there as well. Then take a look at the linked thread and see if that helps at all.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

• iPod Classic not recognized whan connected to iTunes and related issues

  Whenever I connect my iPod classic to iTunes (Windows 10) is not recognized. iTunes then freezes after awhile of trying, it is recognized by iTunes. You can see everything on the iPod, but you cannot synchronize. Then I have to restore the iPod, but you can not recharge music etc. as the sync box has been ticked in the recent update. Then you can charge all your music which takes about 8 hours. WHY! Is this because Apple won't use their classic iPod more or what.

  See corrupted iPod Classic. What are the stats from HARD drive?

  TT2

• Mobile gamepad XBOX 360 not recognized when connected to a Windows 7 64 bit Home Premium computer USB ports

  Very well - so a few days ago (Saturday ~ 2) (25. 2012) I connected to my XBOX 360 (Wired) controller on my Toshiba Satellite L655 computer laptop with Windows 7 ~ Home Premium 64-Bit. To my surprise, a Notification bubble popped up from the taskbar, saying that the "unrecognized USB device. It has malfunctioned. "

  Naturally, I took, waited a few seconds, and then reconnect the USB key. The same message has popped up. Now, I was angry. Repeatedly, I took and reconnected it all a few seconds until that FINALLY the 4 green lights around the button Guide everything illuminated and then back except the one on the upper left, which was the way it should have been.
  I went to the control panel and clicked on the 360 controller to see if he had any input. Nope.
  I pulled out once more, has waited a while and plugged in. No, lucky. The same thing happened again. The Notification bubble came, all 4 green lights on and then all four of them died. I don't know what happened.
  When I plugged the controller to the laptop the FIRST FULL TIME, he installed all necessary drivers in less than a minute and I was on my way. Every time after that, I have taken the controller into the USB Port and began to play. Now all the time, that is to say that it cannot recognize the controller?
  I've tried everything, even a system restore. Nothing did. I've uninstalled and reinstalled the drivers for a few minutes, there was an entry of the controller, then he went just blank.
  I need this controller in order to play my racing games, seeing the keyboard control just aren't the best. I don't know what the problem is, but I wish I had a solution A.S.A.P. Please, Microsoft, please. Help me!
                                                                                                                          
  
  
  
  

  I had the same problem, cannot find a solution that worked everywhere, including Microsoft support forums.

  About to give up, I remembered the old cure NDA, shaped, "why not?"  I've tried everything else. "So I've disconnected everything on the gamepad, blew in every connection and reconnected everything, by ensuring that the connections were tight.

  It has worked perfectly since then.

• iPod 4th generation not recognized when connected to a USB port.

  Original title: question

  When I connect my ipod 4th generation in the usb port a message out saying that it recognizes not it. I tried everything and it still refuses to recognize my ipod. What should I do?

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  ---------------------------------------------------------------------

  For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows.

  Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
  (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

  Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external symbol
  drive and PSG that is the parameter to use to sync with WMP. Remove the MP3 and charge it the
  computer. Change the MP3 in MTP mode - it power off and plug it in.

  ======================================

  There is a plugin to let WMP sync music to an iPod:
  http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

  WinAmp supports iPod
  http://www.Winamp.com/

  How to use Winamp to manage your iPod
  http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

  WinAmp - Forums
  http://forums.Winamp.com/

  6 ways to synchronize your iPod to computer without iTunes
  http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Sony Smartwatch 2 - device not detected when connected to laptop computer

  Hi when the connection of my smartwatch 2 in my laptop I get the USB device cannot be detected / no driver error and PC companion doesn't recognize it too. I know this isn't a laptop problem that I connect my Xperia Z tablet and Z1 phone him fine. Any help would be appreciated. Gavin

  The SW2 is not a device that will be detected as a connected external device - updates are performed via an update to the app and apps are done via the phone - so you can not transfer files simply load it via your laptop

• error code 43 usb not recognized when connecting usb (sd card) with asus X55C laptop.

  Hi, I'm 43 error code while the plugin my usb card with asus computer laptop X55C. I tried several methods indicated on the window on the error code 43 site but I have not any solution even took me out of my laptop battery usb recognize, but it did not work. I uninstalled the Device Manager usb driver, but it also does not work please help me.

  Hi Daman,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur is because of corrupted USB drivers or incorrect settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Download and update the chipset and drivers USB of your computer from these links and check the issue.

  Driver Chipset
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=23&F_NAME=Chipset_Intel_Win7_64_Z9301020.zip#Chipset_Intel_Win7_64_Z9301020.zip

  USB driver
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=22&F_NAME=USB3_Intel_Win7_64_Z103214.zip#USB3_Intel_Win7_64_Z103214.zip

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Device not recognized USB message with iPhone 3g

  Here's the story from the beginning, I hope that I have provide sufficient detail.

  I got my iPhone 3 G is replaced. Therefore, a new phone... I went on iTunes in the middle of the restoration... It gave an error message and put my phone in recovery mode. Since my computer gives me the message "USB DEVICE NOT RECOGNIZED" and appears as an "unknown device" in Bus USB controller in Device Manager.

  I went to apple and they finished the restoration... I plugged the phone on other computers... It is therefore not the phone.

  Still nothing pops up... It keeps giving me "USB DEVICE NOT RECOGNIZED" I have uninstalled iTunes the right way... as Apple people walking through and reinstalled... the Apple Mobile Device is started.

  I still get nothing... everything is... newly installed... Windows doesn't recognize just... that it doesn't show up as a camera... and it does not even charge my phone.

  I tried different ports... and I get the same message... my camera and my sisters iPod shuffle connect correctly.

  I really need help! I don't know what else to do... I need to work on this computer. It's a Toshiba Satellite Windows Xp SP3

  I just went through two weeks of tampering with my 'old' computer trying to recognize my new 4370dn Canon multifunction printer after installing Windows 7.  I tried to reinstall Windows XP, uninstall the USB ports and hubs in Device Manager, update the printer drivers and several combinations of these elements.  In my case the ports would recognize external hard drives and flash drives, but my printer would come as a device not recognized.  Finally, what worked for me was to uninstall all the ports/USB hubs listed in Device Manager (they get automatically reinstalled with a soft reboot of the computer) again, download a driver from the Intel website (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/16023/a08/infinst_autol.exe&agr=&ProductID=&DwnldId=16023&strOSs=&OSFullName=&lang=eng) chipset installation utility and restart the computer.  When I plugged the USB cable from the printer, the normal process of new device was launched.

• Why not the serial number is not recognized when I got Adobe?

  Why the serial number is not recognized when I got Adobe? I have an upgrade of CS5.5 Design and Web Pre3mium worm. CS6. I use the CS5.5 serial number.

  using cs5.5 serial number when you are prompted for the serial number of the 5.5 version or when you are prompted for the serial number of the version 6.0?

  If cs5.5 is already installed, you will be invited to the series of 5.5.

  If you are sure you entered the correct serial number at the OK prompt and always having a problem, contact adobe support: www.adobe.com/support/chat/ivrchat.html

• Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized

  Original title:-wired controller Xbox 360 connects to Windows 7

  Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?

  Hello

  1. did you of recent changes to the system before the show?

  2. do you have the receiver for the device to the XBOX?

  Method 1: Troubleshoot your XBOX controller.

  Follow the steps in troubleshooting from the link below and check if it helps.

  http://support.Microsoft.com/kb/908888

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes

  Method 2:

  (a) click Start.

  (b) access Control Panel, click on System.

  (c) click on hardware, click Device Manager.

  (d) open Device Manager and expand the devices with error code 43.

  (e) right click on the device and Uninstall the device.

  (f) restart the computer.

  Check to see if that fixes the problem.

  If the problem persists, I suggest that you follow the XBOX support link below for assistance.

  http://support.Xbox.com/en-us/

  In addition, check out the link below and check if it helps.

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes

  It will be useful.