DHCP not reaching the virtual machines on the same vswitch

Similar Questions

• Using the same virtual machine on two macs, but not at the same time

  Hello

  I searched this site and the Internet in general, but I couldn't find an answer to this question, so my apologies if this is requested before and if so, please point me to the answer.

  I have an iMac with Bootcamp with Windows 7 Professional x 64 partition and everything works fine.

  I would like to install 6 Fusion and create a virtual machine from the Bootcamp partition, try it for a while and then delete the Bootcamp partition. I found a complete documentation about this and I should be able to do this without any problems, except perhaps for the reactivation of Windows.

  Now the question: since I move sometimes, I would like to be able to move this virtual machine on a Macbook Pro, so I must not move file, sync, etc., and the virtual machine will not at the same time. I read that you use Move so the address UUID and Mac do not change, but I don't know if this applies to move the virtual machine to another computer. If my is:

  (1) is it possible?

  (2) what I have to buy a second copy of Fusion 6 or there is a player that will allow me to run the virtual machine on the macbook?

  Thank you

  Luciano

  I have experimented with a Windows 7 VM, copied (but I have 2 licenses of retail sales) a mini Mac Core 2 Duo to a Core i7 MacBook Pro retina: well, despite the different processor, he did not ask a reactivation, strangely, even after a few resets. Windows 7 so, seems at least to be quite "tolerant", on this front.

• Print jobs may not reach the printer

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  If a draw is sent, he goes to Quebec, she disappears, but does not reach the printer. It shows the same problem even with the local administrator account.

  It is a network printer and works great for other users.

  Printer driver has been updated.

  Spooler service works very well

  No errors in the event logs.

  This paragraph is confusing.  The computer is now connected to a domain or not?

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  The problem you describe appears if the printer port is not directed to the correct address.  This often happens with wireless printers, but if your computer is connected to a domain, you should ask your network administrator for assistance.

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Some of function boxes are elongated and may not reach the OK box

  original title: Windows Vista - Control Panel customization to enlarge the font size.  Some of function boxes are elongated and may not reach the OK box

  Using Windows Vista. I used the customization Panel control to enlarge the font size.  I discovered that some boxes, like Adobe Reader Print and function, in effect, the Personaization (to reduce the font size to original size) require a click OK. But the box frame with large font size, is elongated until I can't get the OK.  How to get to the OK or reduce the size of the police without the OK?

  Simply press enter instead of OK.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• can not reach the optionlist field in std_edit_entry within the archiving of document

  Hello all,.
  I try to customize the page to save the document in a custom component that has a resource with std_edit_entry file, what I want to do is based on a specific value in the list in the field made a specific customization.
  
  but the problem is when I do the customization on a filed optionlist, nothing happened. given that I can't assign to this topic. only can test and verify text fields; No optionlist fields.
  
  Assume that my std_edit_entry as follows:
  
  < html >
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 ">"
  < title >
  TestCheckin htmlIncludeOrString < / head >
  < body >
  < @dynamichtml std_edit_entry @ >
  < $if not isFieldTreeEdit$ >
  < $editEntryName = $fieldName >
  < $country = $ 'xCountry' >
  < $firstName = $ 'xFirstName' >
  < $curValue = $ xml (fieldValue) >
  < $if isStrictList and isMultiOption$ >
  [[% fieldId will point to popup link (or button) defined subsequently to %]]
  < $inputFieldId = $ fieldId & "_hidden" >
  < $else$ >
  < $inputFieldId = $ fieldId >
  < $endif$ >
  
  < entry id = "< $inputFieldId$ >" < $if isStrictList and isMultiOption$ > type = 'hidden' < $elseif fieldType as 'Password' $> type = "password" < $else$ > type = 'text' < $endif$ > name = "< $editEntryName$ >" size = "<$ $fieldEditWidth >»
  < $include std_edit_entry_inputfield_attributes$ >
  < $if fieldMaxLength and isEditMode$ > maxlength = "< $fieldMaxLength$ >" < $endif$ > value = "< $curValue$ >" < $include text_field_enter_for_search$ >
  < editEntryName $if as country$ > onblur = "testFunc ()" < $endif$ > "
  / >
  
  < script type = "text/javascript" >
  function testFunc() {}
  Alert (' this is xCountry field ');
  }
  < /script >
  [[% text field can be leaves % dependent on choice list]]
  < $if useSchema and not noSchema$ >
  
  < $if not hasOptionList and isTrue(#active. $IsDependentList) >
  < script >
  < $useCurrentValue = $ 1 >
  < $include js_set_schema_field_options$ >
  < $viewFieldId = $ inputFieldId >
  < $include js_register_schema_view$ >
  < /script >
  < $jsViewName = "" $> "."
  < $endif$ >
  < $endif$ >
  < $if isStrictList and isMultiOption$ >
  < $include std_select_entry_special_selections$ >
  < $endif$ >
  
  < $else$ >
  < $if isQuery$ > < name span = "< $fieldName$ > _displaySpan" > < / span > < $endif$ >
  < $endif$ >
  
  < @end @ >
  
  < / body >
  < / html >
  
  Suppose the xCountry field is a list of Table-see with countries. and the xFirstName field is that a text field can be filled out by your name.
  in the example above, the onblur function does not work because the field is list, if I change the field to be xFirstName text, the onblur function works fine.
  
  so I can't test on the value of the option list fields. I tried to do my check * < $if editEntryName as country$ > onblur = "testFunc ()" < $endif$ > * "
  inside a special control, also does not work as:
  -$if fieldIsOptionList$ >
  -$if fieldHasOptionList$ >
  -$if isOptionList$ >
  -$if hasOptionList$ >
  
  any help or any suggestion to reach and affect the fields in the list.
  
  Note: the version of the AAU is 11.1.1.1.6
  
  Published by: Najdawi on 6 may 2013 07:27

  But the problem now that what I'm trying to change it, nothing happened. try and javascript code, add static text, change ID--> but no reflection that's happened.

  Where have you changed it?

  Note that the same include can be included in multiple components (patches), and you need to change the one with the highest loadOrder or (recommended), create your own custom with a container resource component understanding and having raised enough loadOrder (that you will have to do anyway).

  Try doing a search for <@dynamichtml std_option_list_entry@=""> in standard and custom components. Brutal force might be to change each of them (I put a static text in front of the)<>

  Note that sometimes for the need to restart the server to enable changes (here, it shouldn't be necessary, but it will do no harm).

• Do not reach the signing of Viewer developer

  I created a generator of edition simple Viewer.

  To test my app with ipad, I tried to download the viewer developer. IPA file, but failed.

  It was downleaded but do not reach the signing of Viewer developer.

  I assumed that the folio has been affected as private.

  I try to change to the public, but there is no option I choose.

  How can I make this point?

  Can I remove my post and re - recreate?

  (I'm not even sure wheather that we...)

  Thank you for any comments on this problem... Thank you!

  Please specify if you are facing problems with the download of the file viewer ipa Builder or course it sync with your iPad?

  "In case you get an error message like' sign failed" while trying to download the file API in VB, you might have used the wrong password P12 to download the developer API. Check the password you must have used to build your P12 certificate. In case you can't make it to work, you will need to contact support to be able to modify your Application.

  If the ipa file syncs with your iPad, then probably your iPad UDID is not added in the Mobile configuration file.

• scrollbar thumb skin does not reach the bottom of the track

  I have a Flex 4.1 application when there is a vertical list, related to a table. As long as the list scroll bar is not skinned, everything is ok, the thumb oscillates up and down the track. But after the addition of a skin, it fails. The thumb never goes all the way down the track when scrolling, but blocks somewhere between the two. For the very long list of items, it even stops at halfway.

  Despite this behavior, the list is actually scrolls to the last item - so the problem is not with some elements at the bottom of the list being inaccessible, but only on the thumb not reaching the bottom of the track, which looks as if the list was stuck at halfway. The skin is very simple and it is pretty much set a picture for the track and the thumb. Is there a method to make sure the thumb always goes to the bottom of the track, the size of the list without worrying?

  Try fixedThumbSize = "true" on the VScrollBar. In addition, it can help to add constraints to the fxg. For example:

  I would like to do the same for the track to make sure that the dimensions of each component is correct. The Scrollbar skin itself seems correct.

  -Kevin

• .vmx is not a valid virtual machine configuration file

  I was working on Mac OS X and the need to copy a file with the large size of the virtual machine and the hard drive was out of space when copying!

  Now when I try to open the .vmx file it get me this error ".vmx is not a valid virtual machine configuration file.

  I deleted a large number of files and try again, but it did not work

  I also tried to expand the virtual machine disk space but still does not!

  Comments: OS X Mavericks 10.9.5

  Host: Windows 7

  
  

  Attached is the log files and the .vmx file

  
  

  Thanks in advance
  

  Hello

  Welcome to the VMware communities forum.

  Unfortunately Apple does not allow to run a virtual mac OS X on non-Apple brand hardware.

  Because this violates Apple EULA (and as such VMware Community terms of use), the problems you have with trying to run OS X using VMware Workstation cannot be discussed in this forum.

  Hope you understand,

  --

  Wil

• If someone could correct? 'Windows 7.vmx' is not a valid virtual machine configuration file

  Hello world

  I seem to have what seems to be a fairly common problem. "I try to boot my windows 7 VM and I get this error message: '/Users/.../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmx' is not a valid virtual machine configuration file.

  Someone would be nice enough to make me a new windows7.vmx file? I saw in other places around here, but I don't know how to do it myself. I enclose the .log files and my windows7.vmx file, so a snapshot of the folder "contents of packaging.

  Thank you so, so much! I wish bake you cookies, but unfortunately their delivery might be a bit complicated

  Have a look here - which will have to explain how do it yourself
  http://sanbarrow.com/VMDK-HOWTOs.html#restorevmx

• can fix wood? "/ Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmx ' is not a valid virtual machine configuration file

  Hi all

  I had this error on my windows machine 7

  "/ Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmx ' is not a valid virtual machine configuration file

  I know that there is a guy named wood that can be attached, if the vmx file and log files

  Hope that the joint can be used to repair

  Thank you

  Jack

  Welcome to the community,

  I'm sure that WoodyZ will be able to solve this problem and will come with a file like the one I've attached to this message

  André