Dial-up access is connected, but Windows Vista says it isn't.

Similar Questions

• MAJOR ISSUE: ThinkVantage Access Connections for Windows Vista causing the range problems

  Community salvation and Lenovo,

  He took a whole day to stem actually happening. Note: That there is no discussion on the software or defective equipment: my equipment is working properly. All the software has been uninstalled and installed properly. I would like to highlight: (read on to find out why)

  THE PROBLEM IS CERTAINLY: ThinkVantage Access Connections for Windows Vista.

  Hi Ran,

  Thank you!

  I have not yet tried.

  In the meantime I did several tests and discovered that even with only Power Manager version 2.41 has installed the latest driver wireless Intel Pro, also supported by lenovo is not stabel and FN + F5 or windows network connection fails also to turn the radio back on to after a reboot when the radio is off Prime ;-(

  Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283

  again and again, I decided to return to the old driver wireless Intel on this page.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67256

  Reinstalled ThinkVantage Access Connections for Windows Vista version 5.12

  I tested it again... THIS MARKET!

  Please try this combination:

  BIOS version: 1.15

  Bluetooth with Enhanced Data Rate software II for Windows Vista Version: 6.2.0.5000

  ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62

  Driver ThinkPad Power Management for Windows Vista, XP, 2000, Me, 98 Version SE: 1.52

  ThinkVantage Productivity Center Pack Version: 3.02

  Power Manager for Windows Vista Version: 2.41 has

  ThinkVantage Access Connections for Windows Vista Version 5.12.

  Intel Wireless LAN (11abgn, abg, bg) for Windows Vista API 11.05.0

  Kind regards

  Ritchy

• I CAN'T ACCESS MY LAPTOP TOSHIBA (WINDOWS VISTA BASIC) BECAUSE OF MY PASSWORD BEING REJECTED BY WINDOWS

  I bought a Toshiba Satellite at Wal Mart in 2009 (3 years ago). I created a guest account and my personal account (host) to access. However, all the important stuff are in the user account from the host. My toshiba laptop running windows vista Basic. It has been 4 weeks as it kept rejecting my user password. Moreover, I do not CHANGE MY P.WORD OR MODIFY IT. I had virus problems and since then I can not access my laptop through my user account. It seems that I'm a homeowner, my key to the door can not open the door and am now sleeping outside. Help please

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Cannot connect to Windows Vista due to password problem

  I have a Dell XPS computer laptop model PP28L and run Vista Home Premium. When I bought the computer I bought in a pawn shop. Of course it was sold with no records at all. No recovery or restore of Windows disks. I have a valid Microsoft "proof of License'for my Vista Home Premium. Should I be reinstall Windows and if yes how I'd get the disks.

  * original title - cannot connect on Windows Vista Home Premium because someone changed my password, deleted my ID of the administrator and the guest connection. I am in the *.

  Your only option is to do a clean install of Vista.  There is no free, download of the disk.  Contact the manufacturer of the computer and they may be willing to sell you a set of recovery disks to reinstall the system (but you will need 23 digit product key to activate it in all probability even if sometimes it is not necessary when it is made with recovery on the same computer discs).

  Here is Microsoft's policy on software lost: http://support.microsoft.com/kb/326246 you can see is not much help.

  If you can borrow an installation disk of Vista genuine of the same size of the bit of ANYONE, you can use that with your product key to re - install the system and start over (you get a new administrator account and set your own password for him - or to leave empty that you choose).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "load error" message when you connect to windows vista account___

  When you connect on windows (vista) to my sons account, a window appears with the Dll Run in the upper left corner and a message that says: error loading C:\Users\... it indicates the name of my son, then - Home\AppData\Local\l41DMut.dll.  It does not appear on the admin or any account of my other children. (parent) account.

  I have tried to download a Web filter, but could not.  I wonder if this error message is the problem.  Even if this is not the problem with the download works do not, should not be there.  You can click on the x to close the box (it always appears twice) and then open Mazilla Firefox, etc.

  What is going on?? Can you help me?  Thank you!!

  Google has nothing for it; normally, who points to him being Malware...

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I connect to windows vista Home premium withou admin password

  How can I connect to windows vista Home premium withou admin password

  Hello

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• My computer says I am connected but my internet says cannot display this Web page

  Vista connection problem

  I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites

  Hello, Scottyookiss00,

  Launch IE without Add-ons

  Start > type Internet Explorer

  Select Internet Explorer (No Add-ons)

  You are able to access the site now?

  If so, reactivate the modules one by one to determine the origin of the problem.

  Try the steps here:

  http://support.Microsoft.com/kb/956196

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• Error cannot access Internet wireless in Windows Vista

  Original title: im trying to connect to my internet at home, but he says there is no internet access how to fix

  I try to connect my internet home for my laptop, cordless, but when its connected he said thar is without internet access how to fix?

  Hello

  1. What is the exact error message you get?

  2. you use a wireless connection to connect to the internet?

  3 when was the last time it was working fine?

  4. do you have security software installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps do not help then I suggest you to go to method 2.

  Method 2:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  You cannot connect to a wireless network on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935222

  Hope this helps and keep us informed if you need help.

• Slows down connections in Windows Vista

  Original title: Blue Circle of death

  I hate this 'blue circle of death"that appears in Vista and slow connections to a snails pace, how do I get rid of him.   Tried power off auto tuning, but had to reset like some sites does not have access.

  Hi swredden,

  1. what web browser do you use?

  2. you remember to make changes to the computer before this problem?

  3 - is this happen when you connect all the site?

  Step 1:

  You can check out the following link and try to optimize Internet Explorer:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Step 2:

  You can also check if the problem occurs in safe mode with network.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

• I can't connect to Windows Vista. Only 1 user account. Tried Safe Mode. No luck. How can I unlock and find my admin password

  Ideas:

  • Vista; Open a session cannot connect
  • None
  • The Point System Restore, Safe Mode, tried to find the file corrupted mode safe "regedit." She appears when in safe mode when I delete the information and I restart the computer, it reappears, so it is not deleted

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this - use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  ---------------------------------------------------------

  If necessary:

  Ophcrack is a free Windows password cracker based on rainbow tables.
  http://Ophcrack.sourceforge.NET/

  How to reset a Windows Vista - Trinity Rescue Kit method - password password reset disc - burn the ISO
  http://www.WikiHow.com/reset-a-Windows-Vista-password
  YouTube video on the use of the Trinity rescue Kit
  http://www.YouTube.com/results?search_query=Trinity+rescue+Kit&search_type=&AQ=f

  Reset your forgotten password the easy way using the Ultimate Boot CD for Windows
  http://www.howtogeek.com/HOWTO/Windows-Vista/reset-your-forgotten-password-the-easy-way-using-the-ultimate-boot-CD-for-Windows/

  Offline NT Password & Reset Editor
  http://home.eunet.no/~pnordahl/ntpasswd/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot connect my windows vista PC to new LG 42 '' tv

  Hi all

  PC Spec:
  ACER Aspire x 3200 2.4 GHz Dual Core, 3 GB Ram, Nvidia Geforce 9200 with HDMI
  Operating system:
  Windows Vista Edition Home Premium Service Pack 2
  TV model:
  LG 42LS3450
  Could someone give me some advice as to why my LG TV keeps showing 'No Signal' when my PC is connected via HDMI.
  We have recently updated from a 32 '' Technika tv which worked perfectly through HDMI, to a LG 42lc3450 with the hope of using it as a screen for our PC.
  After doing some research on the internet the problem seems to be around the PC actually detect the new TV. I tried the Nvidia settings but it does not list the LG screen. I connected the old Technika via VGA and left the LG connected to HDMI. Unfortunately the LG is not a VGA connection. I tried to restart, including turn switch off and restart costs. still no luck. I updated the Nvidia drivers for the most recent and still no luck. If I connect the HDMI to the tv Technika and restart it find it's ok.
  Thanks in advance
  John and Natalie

  < i="" have="" tried="" the="" nvidia="" settings="" but="" it="" doesn't="" list="" the="" lg="">

  Did you put the TV at the entrance to the computer via HDMI?

  Turn on your TV (computer OFF) and place it on the entry corresponding to the output on your computer (HDMI). You may need to refer to the supplied with your television user's guide for instructions on how to do this (or set on HDMI remote entry). Then turn on your computer.

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• Routers Sagem Sky does not connect with Windows Vista. Help!

  Sky Broadband have given me a new SAGEM router as my NETGEAR router broke.  My netbooks running windows 7 connected instantly like having our phones.  My laptop using Windows Vista and will connect but not communicate with the internet.  After almost 3 hours on the phone with the sky and every procedure they have listed I was told by heaven that the problem is with VISTA is incompatible with the Sagem routers and they are unable to help her and I should find a solution through the windows.  I don't quite see how to contact Windows by phone or e-mail in the United Kingdom despite the long navigation of this site!  Can anyone help?  Please?

  Have any sky broadband users managed to use their Sagem router with a Windows Vista computer!

  Start on this page to communicate with Microsoft:

  http://support.Microsoft.com/contactus/?ws=support

  Verify that the country is located in the United Kingdom at the top.

  If Windows was preinstalled by the manufacturer, Microsoft normally refer to them for technical support

• Blur and expanded text and icons after the connection with Windows vista

  I have windows vista and when I turn on the laptop, the text and icons on the Welcome screen are normal, but after registration on the text and icons become slightly enlarged and fuzzy.  How can I get it back to normal?

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.