different network names

Similar Questions

• In ESX VMs can choose different network/name of the label (VLAN)

  Hi guys,.

  My test vCenter crashed and I can't get it back as there is no backup. I can only connect directly to the ESXi servers and use virtual machines from there. Now, I am facing a problem while deploying a new virtual machine and by changing its network. I have a vDistributed configured switch that has 2 groups of ports 10 VLANS and VLAN 30. When I create a new virtual machine, it only let me choose VLAN 30 and will not let me choose VLAN 10 while there are a few old VMs that are still configured for VLAN 10 and I can change their card NETWORK VLAN 30. Should what changes I make to configure the VLAN 10 on my new virtual machines?

  I have 2 ESXi servers and this is the case even on the ESXi servers.

  Please find the attachment.

  Any help would be appreciated.

  Kind regards

  Hello

  The type of binding of default ports is a static binding, which means that you can connect to a virtual machine for a link static port group only through vCenter Server.

  I guess, the port VLAN 10 group is created with a static linking.

  VMware KB: Choose a type of port binding in ESX/ESXi

  If you do not group ports with ephemeral connection, you cannot connect a new VM for VDS if your vCenter is out of service.

  With connection of ephemeral ports, you can assign a virtual machine to a group of ports on ESX/ESXi and vCenter, which gives you the flexibility to manage the connections to VM through the host when vCenter is out of service.

  In this case, you will need to temporarily create a new vSwitch directly on a host with VLAN 10 to connect the new virtual machine.

  More info about ephemeral port binding:

  VMware vSphere Distributed Switch allows the management of the ephemeral ports while vCenter is offline. Vcritical

  http://www.ecloudsol.com/blog/distributed-switch-port-binding-in-VMware-vSphere-5-0/

  Vcenter with ESXi host lost and can not turn on with vDS | Virtual Me

• How to remove or delete profiles redundant network (names) of my office and laptops running Windows 7?

  With Verizon DSL modem in bridge and as a router Linksys WRT 160N, my desktop and laptop computers have been in a network.  Laptop computer and printer via wireless and desktop wired.  The name of the network used to be the same for all connected devices.  However, when my Linksys gave the soul about a week ago, I reconnected it via the Verizon Actiontec WRT704G modem/router combination and since I could not print from the laptop, and it takes about 5 minutes to print 2 pages of my office.  The network name on my desktop by default automatically to the network 4, and on the laptop, there '2' after the former name of network.  With different network names, I couldn't set up my home group.  But I have access to the internet on both computers.  The network name (SSID) on the site config the router and the printer is the same: the former name of the network without the '2'.

  I need help or advice on how to clear or remove these other network names and have just 1 network name for all connected devices.  I know that in Vista, you can merge or remove network profiles but can't seem to find a way to do this under Windows 7.  Also, my laptop is Windows 7 Home Premium 32 bit and the Office on Home Premiun 64 bit.

  Thank you
  Pejuson

  Hi pejuson,

  To remove profiles redundant network from your computer, you can follow the steps mentioned below and check.

  1. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless, and then click manage wireless networks.

  2 right-click the network profile you want to change, and then click on Properties.

  3 make the desired changes, then click on OK.

  For more information, see create or modify network profiles.

  Hope this information helps you.

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "The specified network folder is currently mapped using a different user name and password", trying to connect to a remote drive.

  Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.

  I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

  In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.

  The message is bad because:

  1. the specified network (action2 in my example) folder is not mapped at all, and

  2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.

  The error message is wrong in two respects.

  This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials.  It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.

  David Walker

• 'The specified network folder is currently mapped using a different user name and password'.

  "The specified network folder is currently mapped using a.
  another user name and password.
  Connect using a different user name and password
  First, disconnect any existing mappings to this network
  share '.
  I got this message when trying to access a laptop on my home network. It's a laptop which came for years. The only change that occurred was the removal of a few videos to Windows Media Player. In fact, I was sitting near the laptop (laptop 1) that stores the video & audio files that I share on my network for years and an additional (cell 2) laptop computer on my network. I was simply remove a playlist via WMP and I witnessed portable 2 lose access to files I had shared for years with my home network. I don't even use WMP, I had just open trying to access the laptop 1 video/audio files to my PS3 system. I was clear an old list of video of WMP so I could add the extra avi files to the list that I had collected over the years. I wanted to not double many videos so I removed the videos in WMP list. Since then, I'm not able to share anything of my laptop 1 to the rest of my network. I did not like WMP before, now I really despise WMP. When I try to share a folder, right click, share with & click on homegroup (read/write), the option is not selected. Any solution would be greatly appreciated. Thank you

  Hello

  The link below talking about a similar problem that should help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/the-network-folder-specified-is-currently-mapped/928f6313-fe2c-4d2D-A247-152ec022e062

• Network names

  I have a router Linksys E2500.  Is it possible to have a network name for the secure network and a different network to the network of comments name?  The idea is to not have the SSID of the network broadcast while allowing the SSID of the network to be broadcast.  With the convention of adding just "invited" by the end of the SSID of the network, it beats the security option do not have secure network broadcast SSID.

  Unfortunately, many have asked again this feature was never implemented.

• change the network name on my wireless router?

  A few months ago, I bought my linksys router and did the installation of all the stuff that day, including changing the name of the default network. I want to change the name to something different, but when I went to the address of the facility, there was no box to put the new network name [I was on standard wireless settings tab in the wireless section]. Help please?

  [Yay that worked, thank you:]

• RSAC can't disable remote Firewall errors "could not access ServerName, the network name cannot be found.

  I opted for the "Restore default settings" option in the firewall while working on a client-side computer. For this reason got disabled the option "remote share' and now I can't access the machine remotely. The machine (which is not in the same network) does not monitor or keyboard attached to her and her to a different location so I can't physically connect you and activate this option.

  I tried to disable the firewall remotely, but the following command does not work.
  PsExec \\hostname u user_name password cmd.exe Pei

  It returns the following:

  Could not access ServerName

  The network name cannot be found

  Make sure you share the default admin$ is enable ServerName

  This fact has not resolved the question above.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\ and create or edit a REG_DWORD LocalAccountTokenFilterPolicy value and set the value to 1

  Help, please.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking%2Cw7itprovirt&filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• Time Capsule backups of different networks?

  I have a Time Capsule that serves ONLY to expand my current network, but is also used for the backup of a single computer through Time Machine. If I take this time capsule to a new place, which has a different network I can configure it to join the new network and continue the backups Time Machine to a computer (which moves with it) without losing any old backups? If so, how can I say to join the network at the new place.

  Thank you

  Roger

  The time Capsule cannot 'join' a wireless provided third-party router, if that's what you're asking.

• Change network name

  When I change the name of the network should I reconfigure all printers on the network?

  Potentially, Yes. If your printers are wireless, then you will need to reconfigure with new wireless network name to connect.

• HP Pavilion M4-1002TX: network name not displayed in my HP pavilion m4-1002TX

  Hi you

  Really need your help. My lappy since there are 2 weeks unable to connect on behalf of the office network. The name of the network is invisible. Connection are available but not connected. I tried all the HP PC, troubleshooting wireless network and internet in vain.

  I have no idea right now. Some laptop HP with the same model at the office have a same problem.

  Other network name are appear in the list & also can direct connect using the usb cable.

  Please help me.

  OK after the reset of the modem the network name does not always show upward?

• How to change network name on Time Capsule

  Hello

  I want to change the name of the network on my Time Capsule, to match that of my home, all other routers network so I can use it as an access point more easily.

  How should I do it under OSX?

  Thank you.

  Open Airport utility, click on the Time Capsule icon, then click on modify in the window pop up.  Then go to the wireless tab, network name can be changed here.

• Printer wireless network name recognition

  I have an all-in-One of C4795 printer, on Vista 64-bit, which can not connect again ATT Uverse router. The router has been replaced and printer identifies the old network name/number. I tried everything the HP web site offers, but nothing worksI. At some point in the implementation I find the new name/number and I printed the report of NetworkTest wireless and it shows the old name/number. Help! Joe C.

  Hi Joey1969,
  
  Follow these steps in the document below. Let me know if you need help.
  
  http://goo.GL/jXYCw

• TCP works on different networks

  Hello

  I have a problem with the TCP/IP communication.

  I write a program of communication TCP/IP (client-server) and it works fine when I tested it at the office (same network). But when I tested the program when server and client VI are connected to different network I have no communication.

  TCP/IP works when client.VI and server.VI are connected to different networks? If this isn't the case, someone suggested what protocol to use? Problem is this server VI must be in format exe but customer VI must be opened for editing.

  Thank you

  I think we need to clear up some things before going into the details "debug".

  First, when we talk about 'networks', I expect to see 'LAN' (local area network). A LAN often uses a dedicated identification "subnet", which is a combination of the IP address and the subnet mask. The subnet mask defines which part of the IP address refers to the identification of LAN, the "rest" of the intellectual property refers to the specific PC.

  An IP address (4) consists of four bytes, a given subnet mask instruction on how many bits and bytes are the ID 'LAN '. Subnet masks are often 255.255.255.0.

  When you say "work in the office (same network)", you want to: same subnet. Fix?

  (All IP addresses share the same values in the bytes of the subnet mask, but differ in the rest. Example: PC has 192.168.1.12, subnet 255.255.255.0. PC B 192.168.1.15, subnet 255.255.255.0).

  If the PC are NOT in the same subnet, it depends on the configuration of the network on how to proceed. If there is a "direct connection path" from A to B, just simply the target IP address (for example a 192.168.1.15, subnet 255.255.255.0, B 11.88.2.126, works of subnet 255.255.255.0 if 192.168.1 subnet has a direct connection to the 11.88.2 subnet).

  If there is NO direct link, you need to "port forwarding" on the hardware (router) inbetween. This can become quite difficult.

  So according to the purpose of this request, you may be better redefine architecture approach to loading dynamic components in your application.

  Norbert

• Connect to different networks (with or without proxy)

  Hi all.

  I'm working on a project where I need to be connected at least two different networks. One of them is used to communicate with the wireless IP cameras (using ActiveX Axis Media Control), and the other is necessary to access the internet and load the Google maps (using an ActiveX from Microsoft Web Browser control). I'm at University and the internet connection is through a proxy server.

  I don't know much about networks and HTTP requests, but I notice that if I set up Internet Explorer to work through the proxy, I am able to navigate in GoogleMaps, but there is no way to access the IP cameras. And if I set Internet Explorer to work without a proxy, I get exactly the opposite.

  Could you help me?

  Thanks in advance.

  Kind regards
  Francisco

  Hi Porras,

  Try to create an exception for your proxy server - see attached pictures (Win XP SP3).

  Note: These proxy exceptions can be created programmatically, by editing the Windows registry.

  See you soon.