Digital meter as ammeter connection

Similar Questions

• color of the digital meter ramp or slide is missing the performance

  Hello

  I, m using CVI 2010 (10.0.1. (419) on windows 7-64 bit.

  In a simple program, I use a digital meter. I also use the color of the digital counter and on the IUR ramp, I see the ramp as expected with the defined colors. But when I run the Panel (in the debugging or mode of publication), the instrument (meter) shows but without the color ramp.  If I save the uir file, close it, then reopen it, the ramp of color in the file of the IUR is also missing, so I have to configure it again. It's the same with a digital slide.

  I think it's a bug? Someone at - it the same problem?

  Greetings from bremerhaven

  Norbert

  My guess is that you have inadvertently saved the. IUR in an old format (8.1 or older). In the user interface editor, check the bottom right of the window to see what the current format of the. IUR is.

  If this happens, you will have to change via file > save as.

  Luis

• Satellite P100-102 without digital-video output TFT-connection-Port?

  Hello

  We do not understand why mobile phones latest, as the Satellite P100-102 would be produced without digital-port connect TFT´s...

  On the market-enduser TFTs are popular, but it is not possible to use the digital interface with the portable toshiba. We are not interested in the purchase of laptops from other manufacturers, but our time flee.

  Can you give us a tip, then of the next generation Satellites with digital output to connect TFTs will reach the market?

  Best regards
  Sascha

  Hello

  Sorry, but I disagree with you.
  Toshiba designs laptops that support the digital port (D-video output port)
  Check for example the Qosmio of E, F, G series.

• Output digital USB 6008 when connected does not

  Hi, I have an external circuit and I want to control it using materials DAQ 6008 / using LabView, I tested the digital port work (giving me 5V) but once I connect it to my circuit (PIC16f887) pin his Gimme 0V, I do not know why

  Hello

  because the NOR-6008 has an exit open collecor must connect a pull up resistor to + 5V.

  

• each display elements of files excel on digital meter

  Hello

  IM new to labview and I need my digital display (meter or gauge) to accept entries of an Excel of column 1 and 10000 lines.

  Each item in the excel file IE each line should be displayed to the counter one after another with a second time.

  Is this possible to do?

  Thank you

  Vijay

  Hey there

  I noticed that you said that you are new to labview. Here is an example of your code that should work, as well as a few links that will help you get started. The subject more variety that labview compared to other languages is the concept of data flow, which works very differently from traditional programming, while I linked an article on the screenshot below. I've also linked an article about automatic indexing, as for strongly your project at hand.

  Another tip is to "highlight the execution." The button of the bulb on the block diagram toolbar will slow down and view the program, so you can see how the program works when idling.

  Hope that helps!

  

  Data flow programming

  Automatic Index tunnels

• How can I change the data format of the digital display of the digital meter?

  I created a screen that uses digital counters to display data.  Each meter has its visible digital display so that the user can see the level accurately.  I have changed the format of the data from the meter to 2 digits of precision and want to display to have the same format, but there seems to be no way to do it.  The digital display is locked to 6 significant figures, which will be confusing for my users.  I know that this was possible in previous versions of LabVIEW, but was somehow lost to 8.6.1 and 2009.

  I am aware that I could do some "work-arounds" with channels or replacing the digital screens with digital indicators, but it is not acceptable.  How can I change the properties of digital signage?

  Hi AEI_JR,

  on the Properties dialog box, when you set the display format of the counter, you will find a switch to choose between 'Digital' (the default) and "digital display"...

• Omega flow meter sensor daq connection

  Hi all

  I have sensor Omega FTB 1302 and NI DAQ 6229. Sensor has analog output. I do not know how to connect these sensor and daq.please help

  
  

• digital meter

  Hello, I am working on a counter, but I need help to do the following:

  Instead of the red square in the image, I would like to have the last was received by my digital input of entrance and compare it with the following entry.
  I want to do it because when my speedometer working I Don t want to increase more 1 time during playback of a false entry. I just that it increases its value when it reads a new set to false.

  for example:

  entry = F and F was the last measure, I Don t want it increases its value

  entry = F and the last measurement was T, I want that it increases its value

  entry = T I Don t want it increases its value

  How could I do? with a shift register I can do, but I want to reduce my code in labview, thank you

  

  
  

• Using the Digital Signature method to connect to the IOM

  Hello
  
  I am using the following:
  Config ConfigurationClient.ComplexSetting = ConfigurationClient.getComplexSettingByPath ("Discovery.CoreServer");
  final Hashtable env = config.getAllSettings ();
  tcSignatureMessage moSignature = tcCryptoUtil.sign ("xelsysadm",
  "PrivateKey");
  tcUtilityFactory ioUtilityFactory = new tcUtilityFactory (env, moSignature);
  
  
  and it gives special suite:
  
  com.thortech.xl.crypto.tcCryptoException: file KeyStore: de.\config\xl.keystore lack.
  
  Where should I make the arrangement of the environment of the keystore file?

  You can get the resource key of TI in the java code via mappings (make a variable type IT Res and the map with the process-online IT Resource data)... and make use of the API to get the detail of IT resources...

  Thank you
  Suren

• Toshiba 40L3433DG - connect Dolby DIgital 5.1

  Hello
  I intend to connect to the TV Cable Television to my TV and sometimes my laptop by HDMI
  I care about Dolby Digital 5.1 sound in this configuration
  I want to buy Toshiba 40L3433DG and I have a few question. :
  Toshiba 40L3433DG transmit sound Dolby Digital 5.1 by connect coaxial (Digital Audio Out: (coaxial) or any other 5.1 audio output?)

  HDMI cable / port signal audio and video digital and Dolby digital must be supported by HDMI.
  The TV seems to support S/PDIF out so you should be able to connect your HiFi using this interface.

• Do not connect ANALOG and digital grounds when the annotation to the front at the UB

  I'm finding randomly more often when I annotate with impatience to UB analogous and digital patterns do not connect.  In addition some power to the IC pin connections are unable to be connected in UB.

  Connect to the digital terrestrial analog ground is checked in my properties of Ms.

  Is there a reason for this?

  Thank you.

  Tien Pham offers this solution that worked:

  I saw the ground issue in the file you sent and you can fix it by replacing
  the digital ground with the one from V12.  On the Spreadsheet View, click
  on the "Components" tab, select all the Dgnd symbols, next click the
  replace icon on the Spreadsheet to replace all symbols at the same time.
  

• the digital camera driver does not load when a sony camera is connected to the computer vista laptop.

  At the same time the downloaded movies netflix has more audio.  Device Manager does not display a driver of the camera when the camera is attached via firewire and running?  I tried to reload the drivers and worked with the pilot web-based updates.

  Hi mstradt,

  1. which version of the operating system are you using 32-bit or 64-bit?

  2. What is the model of the camera number?

  3. you try to use the camera of Sony for the first time?

  4. How do you try to connect the camera?

  You can first try connect the camera with the different port and check if it is detected.

  Also try to use only Sony 4 firewire cable 4-pin to connect the camera.

  You can also visit the following links and see if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 6229 USB meter

  HI, I connect acquisition of data USB 6229 quadrature encoder, I connect CH A PFI 0/P1.0 or PIN 73 and PFI 0/p1.1 or PIN 74 and I'm setting them up as a counter or a desk reading in. The USB6229 of data acquisition is not read these signals as a counter. How I would read the counts of a quadrature encoder, using materials DAQ 6229.

  Regads;

  JH

  The fact that it is the reading of thousands and millions usually means that there is noise on the signal that is picked up as the account when it really shouldn't be.  To correct this, you must activate digital filtering:

  See the example:

  Use the digital meter Debounce filter

  and page 7-32 to 7-33 of the M series user manual for details of what a digital filter is and the different settings available for the 6229.

  Activation of the filter will get rid of the very high frequency on the digital line noise and must get rid of the extremely high values and instead to give a good account of 256 / rev.

• connect iPad 2 to Pioneer AVR

  How to connect iPad 2 to a pioneer in the APR SC57 to play the slideshow

  You have 2 options of ability of airtime to the receiver is limited to Audio:

  1. use an Apple TV connected to the receiver via HDMI and Airplay the slide show to it.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

  2. use a PIN 30 digital Av adapter and connect the iPad directly to the receiver via HDMI.

  http://www.Apple.com/shop/product/MD098AM/A/Apple-Digital-AV-adapter

  The receiver manual

  http://www.PioneerElectronics.com/StaticFiles/manuals/home/SC-57_OperatingInstru ctions060711.pdf

• connect the hard disk drive to airport extreme

  I have Airport Extreme running.

  I have connected a HARD drive to the Airport Extreme, but do not see the device of the HARD drive in the Finder

  How to map iTunes to play music files devices HARD drive to play music?

  The drive must be formatted in FAT16, FAT32 or Mac OS extended (journaled) and may need its own supply. If these criteria are met, use the connection to the server command in the Finder Go menu to access.

  (141910)