Dimension 5000 - DVD

Similar Questions

• Add the Second controller IDE for Dell Dimension 5000

  We have a Dell Dimension 5000 that has proved to be a very capable workhorse.

  Since buying it we have replaced the DVD burner with a more quick/tough, added an IDE hard drive and added a second SATA hard drive.

  We would now like to add an another DVD burner or another hard drive IDE - anyway we need more IDE connections.

  Can we just add an another IDE controller in one of the free PCI slots?

  Will any make/model or someone at - it recommendations?

  
  

• Upgrade of dimension 5000 with 1 GB of video

  I have an old Dimension 5000 here which was a Euro version 5100/5150/E510... series date back to the time. It still does a life more decent job running Windows 10 for anything games, so internet, office light etc...

  Here's the question: it was once upgraded with a 512 MB GeForce MSI slot PCI-E x 16 without problem. Trying to run a 1 GB card but turns out to be a problem.  Tested both until this new Geforce GT 710 - a passive MSI and a PNY with cooler fan - would cause the machine to Rev up the fan on the CPU for a few seconds before posting the "alert!" PCI Express card works in X 1 mode"message when starting. After hitting the F1, everything is normal. They are still rising 'usable memory' under Windows/System, which was one of the goals of this upgrade.

  Re-seating cards several times into the slot has not made a difference. The machine has the latest BIOS v07 and has been improved with a peak of 350W/400W PSU.

  The theories here? I do not understand why there is a compatibility issue with the 1 GB cards.  I noticed minor differences in the provisions of the PIN between the 3 cards, but they are all designed for any compatible mobo PCI-E with a x 16 slot.

  TIA

  Several versions XFX have heat sinks that are TOO LONG and TOO FAT to physically enter the case.

  Asus units adapt to all dells except USFF which has no slots.

  

• Dell Dimension 5000 replacement PSU

  I have a Dell Dimension 5000 bought in 2005, still under Windows XP.

  After being off for a week, I recently tried it lights up, but got only a flashing orange power button. After reading this thread I tried to jump the power supply to the power connector motherboard from green to black as suggested, and nothing lit. So I guess that the PSU is dead and must be replaced.

  I also read this thread a person with a similar problem.  My power supply model number is L305P-00 and reference number 5032 (CN - 0d 5032-71615-513-06BE), exit 305 w, and it has a connector ATX 24, 2 SATA connectors, etc..

  I'm hoping to replace the PC soon, so don't want to spend too much on the power supply. Corsair were recommended as a good brand, but they are quite expensive, so I was wondering if this PSU Novatech would be suitable? I think they're a renowned brand. They sell as well others and I don't know what the difference between each one, apart from the power and the fact that some are not modular, other semi or fully modular.

  The Novatech £19.99 would be good enough to get my PC up and running again, or that others would recommend?

  TOBYDENNIS

  Dimension 5000 does not use a power supply owner Dell, most of the blocks of ATX power supply with a 24 pins, power connector 4-pin main card mother 20 + or with, or can be used without the power switch, a power supply with two SATA and molex power two connectors 4 pin is necessary.

  You should be able to buy a replacement power in a store of the local computer or online.

  The Novatech 500W ATX Power Supply, as shown in your link should work...

  Bev.

• Replacement of power SUPPLY Dell Dimension 5000 block

  Hi - I have a Dell Dimension 5000 (around 2005) with a duff ATX PSU.

  Dell p/n is CN-OC5201-17972-51R-1CNV and the model # is N305P-00

  I looked on this forum and the recommended not only equivalent Dell PSU (Antec TRUEPOWERII IPTI-430 430W ATX12V 2.01 Power Supply) does not seem to be available (UK).

  Does anyone know of a compatible brand/model power supply that I can replace my diet duff with or where I can get a direct replacement from DELL for a reasonable price?

  I think my power supply DELL has these connectors:

  P1 - power of card mother ATX 24-pin
  P2 - 4 motherboard power PIN
  P3 - 4 SATA connector
  P5 - Ditto
  P7 - connector floppy 4pin
  P8 - 4 Molex power connector pin
  P9 - Ditto

  Any help would be appreciated...

  Thank you

  yydelilah

  Corsair is an excellent brand of food, with a good warranty

  The Corsair CX 400W ATX2.2 Power Supply, would be compatible with the Dimension 5000.

  Bev.

• Power button blinks orange Dimension 5000

  I was using my Dimension 5000 when it stopped unexpectedly. The power button is now flashing orange unless I have press and hold when it does not. By pressing once again does not produce light flashes. I have an important work on what I need to transfer to my laptop so if anyone can help me, I would be very grateful.

  Nitwit2

  

  Bev.

• Dimension 5000 graphics card update.

  Hi, thanks for reading.

  I have the map of X300SE graphics by default for the Dell Dimension 5000 but want to update the map.
  As you may know, the PSU has 305 w and isn't a thing of connector 6 pin.

  I am currently interested in the Sapphire HD 4670 Ultimate Edition but I was wondering if it is compatible.

  Thank you very much.

  Nodame.

  PS - I understand that this is not the right place to post, but I have one last question on the installation of a second hard drive.
  I wonder if the Dimension 5000 is compatible with SATA-II hard drives? It requires no jumpers or is it just plug/install and format and go?

  Thank you very much.

  Hi Nodame. Your manual is HERE. Cards that would take yoiur system are the 9500GT, 9600GT and the map of your after, the ATI 4670. Manufactors overstate the power for their cards a dell underestimate the power in their PSU. With respect to the hard disk, yes a SATA - he's will work in this system, everything that you have to buy is the SATA data cable. An additional power connector should already be in your system. Here is a link to the 4600 series ati.

• Dimension 5000 HDD speed

  I currently have a 250 GB HDD SATA I. (1.5 Gbit / s)

  OK, here's what I want to do. I want to accelerate the speed of access/write on the HARD disk:

  * Dimension 5000 motherboard is able to use the SATA II 3 Gbps speed?

  * If I plug a second HDD, can I use it in RAID 0 with my existing HARD drive?

  (Note: I just updated the bios and I'm still not a table option, just normal/mixed.)

  
  

• Dimension 4700 dvd - rom & dvd +-RW nor working

  I'm not either of my dvd to work on my dimension 4700 players.  When I look in Device Manager, there a yellow circle with a black exclamation point next to each of the disks.  The first is HL-DT-ST DVD - ROM GDR8163B and the second is PHILIPS DVD +-RW DVD8631.  When I click on them they both say "Windows cannot load the driver for this hardware device.  The driver may be corrupted or missing. (Code 39) ».  The use of the device is turned on.  I tried to uninstall and reinstall but still the same thing.  I tried to uninstall and reboot my pc, but when I go back into Device Manager, they are both with the same error code and the sign again.  I tried to download the driver from dell, but it tells me that it cannot find the device.  Help!  I need my readers!  Thank you!

  
  

• Being not recognized in dimension 8400 DVD drive

  Hi all

  I have a problem with my DVD drive in my dimension 8400 (about 3 years)

  I can open the DVD player and insert DVD/CD but they are not recognized,

  My computer is not present DVD player, there is no CD/DVD players present also in the management of devices.

  I think the DVD player I have is the Philips DVD 8601 HH 16 x DVD + RW,

  I had a similar problem about 1 year ago, but that has been fixed by updating the firmware/drivers. (although the DVD player doesn't "disappear" from my computer, it comes to refuse to play the disc at the time)

  Im not a computer newbie, so I tried several things to try to make it work:

  http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=138730&query.ID=270189#M138730 I did steps 1-3 and 5, and nothing has worked.

  Someone at - recommended step 4 too? Question about step 4: you have to clear the CMOS chip memory AND reset the default settings of the BIOS Setup? It was not clear from the guide on this forum.

  I tried to download the updates of the Firmware, but when I tried to update it says "Device not found", logic, because the device is not - where on my computer.

  That's my problem.

  Thank you very much if anyone can help me

  Perhaps the DVD player is just broken and I need to get a new one, but the fact that I can open and close the lid and the light Burns gives me hope that its stil alive: P

  Concerning

  Rowan Schaap

  
  

• Dimension 3100, DVD burner?

  Hi all

  New here and looking for some tips.

  Dimension 3100.

  Windows XP.

  While the realization of this machine is pretty basic, l has recently got a camcorder and was wondering is it possible to host record-film on a DVD. Had no problem getting film on Movie-Maker and it looks good on the PC but would like to burn to DVD.

  Any response greatly appreciated...

  
  

• Dimension 4550 DVD-ROM and DVD-RAM will not read disks

  My daughter has a Dimension 4550. The engraver has recently left working, so we replaced it with a Lite-On DH-20A4P-08 DVD - RAM drive. We played a couple of moview and a CD on the new drive. Today the old DVD-ROM new DVD-RAM both refuse to recognize that a disc is in the disc (DVD or CD); He says: no disc in the drive. We have checked the cable connections and updated the driver for the new drive with no luck. We also tried the Dell store without success.

  Any other ideas?

  How to run diagnostics on these discs?

  
  

• Maximum internal dimensions of dvd player for the 0p6280t Pavilion

  lasvegaswireman was great response to my question about the installation of an additional drive. However, in the search for readers, there differences in dimensions, although close.  Is there a place that provides the maximum dimensions when you add a new internal drive, so I can ensure that I buy one which will, until I opened the pc and the new drive?  Thank you.  Mike

  Hi Mike,.

  Remove the front cover and a Stirrup of veneer confirms achievable tolerances.

  

• Master IDE HDD to slave in Dimension 5100 DVD burner

  Hello

  I just added a disk IDE (PATA) (jumper to master) to the same controller that my existing DVD burner, now set as slave. the two IDE channels is enabled in the BIOS and the hard drive passed Diagnostics.  But the new IDE HDD is not recognized by Windows, although it appears like a hard drive under Device Manager.

  The recommendation of the forum seems to favor using an external HARD drive enclosure, but I'm not willing to do unless it's the only way to make it work.

  What else is required to complete the configuration?  I am running XP Professional.

  David

  
  

• Compaq Presario C700: Compaq Presario C700 maximum upgrades. CPU/SODIMM

  Hello

  Please answer suite

  1. how to get the maximum for components upgrades

  CPU / SODIMM given the configuration of the model Compaq Presario C797EE mentioned at the end.

  2. Why is there BIOS ver F.35 for Presario C700 when later offered is the worm F.34 bios on HP web. What is the difference. Where can I find both to be uploaded with the release notes. New BIOS on model C797EE allows processors support Intel Core 2 Duo X 9000 and PC6400 SODIMM for 8 GB?

  3. There is evidence of success update here. Only difference is its Compaq Presario C797EE but C771US not and was able to upgrade CPU Core 2 Duo T9300. Is it possible to upgrade series C700 (C797EE) to Intel C2d Extreme X 9000 processor. If this is not the case, what is the max for the chip set used in C797EE.

  4 NT are different for Intel T9300 and others by 35W 44W or any other factor, will they perform the upgrade, if yes then please provide last possible list compatible CPU my current chip-set

  Comparative analysis of the applications here are showing different results. Please see Sandra chipset readings compare to the results of CPU - Z.

  I will be grateful

  Thank you.

  Current configuration of the system:

  identified by different applications

  CPU - Z:

  Chipset: Mobile Intel (r) 965 Express Chipset Family

  CPU: Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz

  Socket P (478)

  Memory: DDR2

  Format of SO-DIMM

  Size 2048 MB

  Bandwidth Max PC2-5300 (333 MHz)

  DMI BIOS

  vendor Hewlett-Packard

  Hello, just let everyone know that my upgrade worked.

  -Processor

  Updated for intel T9300 as reference. probably could support the x 9000, but it was much more expensive is not a value

  -Memory:

  I was skeptical with past more than 4 GB, however, currently functioning 6 GB (2 X 4). foung are not accidents of errors due to modules. Works perfectly.

  . After these updates, I installed small SSD, which added to the startup that gave more boost to the system.

  . Replaced the DVD with Caddy drive through visruth, installed with 1 TB

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dimension-of-DVD-CD-used-in-Compaq-Presario-C700/m-p/4926179

  . Replaced with 12 cells battery

  Conclusion:

  This unit of 8 years demonstrated startup, transformation and loading speeds that could be compared to couple of old machines, 6 GB working memory space that can accommodate witout heavy programs using the file (actually disabled) Exchange and on the storage of Tera bytes to store every necessary thing making the year becomes mordern General phone use. Only thing that is not dealing with it is the graphics card. Besides that all is well, infact it runs more more fees than before.

  Thanks for your advice