Director of publication

Similar Questions

• Is there an equivalent of Zinc for Director?

  Many of my colleagues using Flash using Zinc to create their .exe projectors of. Rather than own Flash SWF files published feature. Does anyone know if there is an equivalent for the creation of .exe files from. DIR files? I know the Director of publication options are fairly complete, but the features of zinc are so nice!... even if it would require a few additional xtras.
  
  I hope someone can help.
  
  Tom

  Great, thanks for that...

  .. .found more information about scrnXtra here - http://director-online.com/buildArticle.php?id=1109

• film director publication for computer problems / sound but no video

  I can do and get a glimpse of a sd video in movie maker, but when I publish it, some of the clips have audio but not video. I also tried the publication of a dvd and the same result. Sometimes I can watch the clips in media player until I send them to movie maker and sometimes I can't. It also appears if I try to take the file from my documents before publication and reformat, isn't there? I had this problem throughout, I thought that I understood when I used some formats, but it doesn't seem to be the case. What can we do? I have several formats of videos on my computer

  I can do and get a glimpse of a sd video in movie maker, but when I publish it, some of the clips have audio but not video. I also tried the publication of a dvd and the same result. Sometimes I can watch the clips in media player until I send them to movie maker and sometimes I can't. It also appears if I try to take the file from my documents before publication and reformat, isn't there? I had this problem throughout, I thought that I understood when I used some formats, but it doesn't seem to be the case. What can we do? I have several formats of videos on my computer

  ==============================================
  Brief paragraph... many questions... I'll try to come up with a few ideas...

  The free VLC Media Player can play any video...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  The file you are trying to convert may be a project .mswmm file
  It is only compatible with Movie Maker... they cannot be converted.

  When you try to access a video clip that you "know" is sometimes in a
  file, but you can not see... is it because that the format of in that the video is
  not compatibile with the software you are trying to access.

  The following freeware is a useful tool to convert a lot of different
  Movie Maker formats...... use the conversion to WMV format would be
  a good choice.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup260.zip
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After the publication of video in Movie Maker, it has a large green block down and extends the video

  I used a video camera to make a video and down it loaded on my computer.  Director of Windows wouldn't let me not download it from there, I guess that he could not read, so I converted it on AVS video converter 7.1 for mp4, which was unreadable on windows movie maker.  I then converted it to an avi and easily, he was transferred.  My problem is now, after the publication of the final draft of the film, he shows a huge green block at the bottom of the video and stretches horizontally on video.  This is not displayed when you edit the movie in windows movie maker, please help.

  Hello

  Since you used the 3 part video conversion software, we have no way of knowing what has occurred with the video. The only thing we can suggest is to follow the instructions in the following articles using the original video recorded and imported into Movie Maker:

  http://Windows.Microsoft.com/en-us/Windows7/make-a-movie-in-four-simple-steps

  http://support.Microsoft.com/kb/930435

• Director of Windows will not let me record movie published in a specific location.

  Director of Windows cannot publish the movie on the precise location. Verify that the original source files used in your movie are still available, that the publication is still available, that there is enough space available and then try again

  ive tried save to email...
  Ive tried save on my c: drive where there are 168 GB of free space
  the mov is 2.21 minutes long...

  Help me please

  Perhaps one or more of your source files are
  not totally compatible with Movie Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  See the following article:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

• vCloud connector - cannot copy VAPP vCloud Director to vSphere

  Evening,

  Try to copy a paralytic to vCloud Director on vCenter 5.5 5.6 using vCloud connector 2.7.

  The scenario:

  -vCloud Director fully configured with one Org, an Org vDC and a catalog.

  -The catalog is entirely filled, shared and published.

  -Org and catalog are configured to allow the publication to external organizations;

  -vCenter and vCloud Director have been added to vCloud connector via vSphere Client plug-ins;

  -vCloud plug connector is able to see the entire structures of vSphere and vCD (org records, catalogs, vApps, models, etc.).

  Reproduce the error:

  -Using the vSphere Client, click on the Org vCD;

  -Go to the tab vApps.

  -Select a VAPP off engine;

  -Click on copy.

  -Select Catalog (it is marked as shared and, curiously, unpublished);

  -Select vCenter as the target;

  -Select the clusters, folders, data store, formatting the drive and so on;

  -Power On TIME after deploying (or not, does not matter);

  -Validate (managed);

  -Finishing.

  Task starts and fails in a minute (or less) with the following message:

  "Export OVF has failed. Failure when copying data to the clouds: https://< vcloud_director_fqdn >. Reason: [0e65fbc1-4e04-4924-ae06-c4377dfc97af] there is no catalog in the organization. »

  Looks as vCloud connector, for some reason, is unable to locate the catalog during deployment (although it may be perfectly visible during the Copy Wizard and in his inventory).

  I tried searching for it and can't find anything similar to this error.

  Maybe it s a vCD configuration error, but how would be? I ve already selected all types of option to allow editing of catalogue and sharing, and nothing has changed.

  I published also successfully catalog VCDs to vCloud connector content library, so nothing else makes sense to me.

  Solved.

  Created a new catalog and IS NOT published. Used for the copy. Went well.

• Is there a way for EA to automatically save the audio files in the project and publish directories &amp; json?

  Is there a way for EA to automatically save the audio files in the project and publish directories & json? Thank you

  Bob

  good edge would not copy all the external files that you have added to your project in the publication of record, you should only do copy paste your files and folders created by your self after publication!

  and I can not undrestand "Unlike you, I'm not that qualified and often make mistakes that make some of my totally useless code retries." You can save your project every time with the new name to have your previews works!

  and on the withdrawal of your symbols that uses the name of the class, you're hurting, you should do it this way

  SYM $(".) Preview"). Remove();

  and that's why you can not make it work

  If tehre is any question feel free to ask me questions

  Zaxist

• Evaluation of Director 11.5 - Spotlight turned off?

  Hello

  I downloaded a copy of assessment of Director 11.5. I am looking to buy so I can produce both PC & Mac projectors.

  Unfortunately, the two projector in the publication settings options are disabled. Is it because it's a trial version - if so it really cut short my evaluation!

  If not, is there something missing in my setup. (It is under Windows XP SP3, 512 M Ram). I tried to recreate my old Director 8.5 development environment, even copied on the xtras again to xtras folder. Nothing works.

  Anyone with any ideas or knowledge of this problem?

  Thank you

  Greg Tobin

  [email protected]

  I know that turning off projector creation was once one of its 'features' of the trial version, but I thought that it had been reactivated. Help-> updates... menu option work? In other words, is that it updates the authoring environment? That could reactivate.

  Otherwise, take the file named "projec32.skl" creating folder, rename 'stub.exe' or something like and use this as your heel. You will need a file named "stub.ini" (or other) next to him with an entry like:

  [movies]
  movie01=YourMainMovieNameHere_NoExtensionRequired
  

• can iCloud Documents sync - I exclude this directories?

  Is it possible to exclude some files/directories of this?  I think especially in defence of apps 3rd stuff left in Documents that may not work on more than one Mac.

  • Microsoft Office binary data files
  • Other applications that store binary files, license files, encrypted files using something specific to the machine like salt, etc.
  • Game save files
  • Images of the Virtual Machine in Parallels Desktop or VMWare Fusion (previously, copying the files manually to a new machine generating warnings.

  You ask what you are is well above my knowledge.  Maybe if join you Apple Support to find answers to these questions.

• How to remove the plug-in: Shockwave for Director

  I got a new pc a few weeks and recently downloaded Firefox. I don't know if shockwave for Director came with the download. But he is listed in the PLUGINS. It displays a warning that they are vulnerable and must be updated. I don't want to do that. Although I have so far, it is not anything on the PLUGINS screen to REMOVE a plugin. That's what I want to do. I checked the control panel to uninstall, but it is not listed under Adobe, Intel, Shockwave, etc. I read another post where people suggested some things real techno that I would never try.
  Dear Firefox: Please find a way to "REMOVE" as an option to remove a plugin.

  See this link;
  https://helpx.Adobe.com/Shockwave/KB/Download-Shockwave-stand-alone-Installer.html

• Content of UpdatePanel is not rendered in Firefox 42 after second partial publication

  I'm using Firefox 42 (Code works great in IE9, 10, 11, and Chrome).

  Consider three DropDownLists dependent within an ASP.net UpdatePanel. A, B, C

  When I change A, the values of B are met properly. I'll then to change B, C values are not met.

  Partial publication occurs, I can see the fill C codebehind correctly, but the changes are not made in the user interface.

  I then continued to do another test.

  I changed the values of B and C properly completed. Then I went and changed, the values of B did not update.

  Which led to the conclusion that the problem is rendered content during the second partial publication.

  Someone has an idea what is the cause?

  Just in case someone encounters this problem.

  Problem was a bug in AjaxControlToolkit AsyncFileUpload component which related only to Firefox. update the Toolbox to the latest version of fix the problem.

  DevExpress Ajax Control Toolkit

• Thunderbird hangs when it is looking for a temporary directories on C:

  Grateful for your help?

  I'm migrating from Outlook 2010 to Thunderbird. When I import the Thunderbird emails it crashes when it is looking for a temporary directories on the C: partition. Note the C: partition is limited to 30G and PST file is very well 17G and work in Outlook, I installed Thunderbird, its profiles and PST D: files. But for some reason any he wants access to C:\Users\Michael\AppData\Local\Temp\Mapiattach-3.temp, this file exists. I get the error message is "check your"temporary directory"settings and I can't seem to find them?

  Any ideas how to solve this problem, import this file big file PST in Thunderbird.

  I thank in advance

  Oobals.

  Finally, you have to update my emails in Thunderbird today, yes you must at least double the size of the free PST files in the same drive as Outlook and Thunderbird resident to do the import. Waiting a long time if the PST file is very large.

  Thank you for your help and advice from Matt.

  Best regards

  Oobals

• No option to uninstall Shockwave for Director plugin

  I want to get without Adobe and uninstalling, but find myself with this shockwave for Director plugin, which only give options to activate or not. But I not went. How do I do that?

  Hello

  You can uninstall it from your control panel > programs and features.

  Alternatively, if you don't find it in this list, in Firefox you can enter topic: plugins in your address bar to find the location of the dll and the move/delete from there.

• In my "Plugin Check &amp; Update" Shockwave Director is not up-to-date, and every time I go on the site. Nothing happens, it just says: "Installation Complete.

  -Hello! This issue has been a problem for months and has been bothering me for a long time and I don't even no what the problem with my browser, or my computer if this is the case. I tried several times by clicking on the "Plugin update" I go to the website of Shockwave and he told me that the installation is complete, but the confusing part is that I have the ability to download anything. He just said "complete Installation."

  Help, please!

  And, if possible, please tell me how to uninstall the Shockwave Director, because I do not think that I still need.

  I'll try and offer the pictures of what I see, I hope it helps.

  That's what he tells me.
  [IMG] http://i1251.Photobucket.com/albums/hh553/KervinsPictures/FireFoxProblem.PNG Line

  [IMG] http://i1251.Photobucket.com/albums/hh553/KervinsPictures/FireFoxProblem2.PNG Line

  Hello

  You should not install Shockwave Player unless you know for a fact that you need.

  1. In the next page, save the uninstaller program, the full installer for Netscape and the full installer for Internet Explorer if you wish also in this browser.
     • http://www.Adobe.com/shockwave/download/alternates/#SP
  2. Close all applications.
  3. Launch the uninstaller.
  4. Restart your computer.
  5. Run the installer for Netscape.
  6. Run the Setup program for Internet Explorer, if you downloaded it.

  This forum supports BBCode as the [IMG] tags. You can simply post the Plains links to images. In the replies to the thread, you have the ability to attach pictures to your message.

  • https://support.Mozilla.org/KB/markup-chart

• On my backup of directories in Mac Mail?

  Hello:
  I move all mail messages that I want to keep my directory of Mac in a mailbox under structure.  I deleted a file by mistake.  I tried to use Time Machine to restore the directory.  I can not get on my upcoming Mac directories in backups.  So, I guess that Time Machine backup of these.  Please confirm me.  And, how you save these on my Mac mail directories?  So it is the more important things, I would like to see a solution.

  Thank you.

  Please bring the Mail browser window to the front, then enter the Time Machine. You will see a series of windows Mail cascading at the time, each representing a snapshot of the database of e-mail.

  Scroll to the most recent snapshot that contains the messages that you want to restore. Select the messages, or select an entire mailbox, then click on restore. Messages will be restored to a new mailbox named 'com.apple.Mail.backup' in the Group on my Mac. From there you can move wherever you want.

  If you do not see the recovered messages, place the cursor on the title on my Mac in the mailbox list. An element, see the or the skin will appear to the right of the header. If this is the show, click it.

  According to the mailbox store how much you have, you may need to scroll the list of mailboxes upwards or downwards to see the new entry.

  According to some information, you will need to restart Mail or maybe wait a bit for the database to be reindexed before it manifests. I can not confirm these reports.