Disable the tracking host

Similar Questions

• RV042 impossible to disable the DMZ Host

  All trying to configure my RV042, I "turned on" the DMZ host feature (under Configuration > DMZ Host) by entering the address LAN IP of one of our machines. I think now that I don't want to actually on. According to the help page (and also the manual), he says:

  "Enter the IP address of the network device you want to use as a host DMZ." Otherwise, enter a zero (0.0.0.0) to disable the DMZ host.

  So I try to enter the address 0.0.0.0, and it gives me an error:

  

  What I am doing wrong? The instructions are just incorrect? Is there a way to disable this option?

  If the LAN subnet is 192.168.1.x/24, you might want to try instead of 0.0.0.0 192.168.1.0 to disable DMZ Host.

• How can I disable the track/touchpad on my Asus PC with windows 8?

  I find the pointer jump around and spoil me when I type - simply a Palm brush or contact minimum. How can I disable it? is there a combo/input physical key I can use to do?

  Hey Nate,

  Touchpad can be disabled on Windows. Press the Windows key + X -online-online mouse and other pointing devices Device Manager , right click on the touchpad device and select Properties. Select the driver, and then disable the touchpad.

  Reference: http://support.asus.com/Search/KDetail.aspx?no=E8EB6B9F-2863-DA82-5B45-892D240ACA11&t=2

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• 14:Two yoga made 3 finger tap a click right does not work, no way to disable the Tracker for palm

  I have recently buy Lenovo Yoga 3 14 inches and have found that I cannot disable followed two palm or use two fingers click right tap function.

  I went in the mouse settings but still no help, it is said that tap two fingers is enabled but does not work, all other touchpad gestures work perfectly. I currently have the driver version: ELAN Touchpad 11.4.54.1_x64

  If it's any help, the virtual mouse device of Lenovo also has the version of the driver 14.20.52.752

  I already checked the MOMENTUM without result and also parameters of lenovo found in Program Files/Elantech. They both contain palm Tracker settings, but they are put at least still do not clear up my problem.

  If I can't fix the two finger tap or palm Tracker option that I plan to take my back just Lenovo for the hassle it caused.

  I did my research but still no results found. Help, please!

  That help me:

  I have the solution:

  Run regedit

  HKEY_curreent_user/elantech smartpad /software/.
  Tap_two_fingers value 1
  Tap_two_fingers_enable value 1

  Reboot and then you can use 2 fingers to the right click

• How to disable the file host Guest service (hgfs.sys) system?

  to disable hgfs, depending on error failure CPP while creating trust relationships between Windows 2003/2008 servers or domain controllers on the Web Vmware site, to change the registry, but could not find hgfs on regietry as it intrudued on my Win 2003 SP2.

  So, how can do?

  Thank you.

  http://communities.VMware.com/message/519830

• How can I disable the track stick on the keyboard?

  There is a button in the center of the keyboard and I continue to hit when I type and lose my place. Makes me crazy!

  Hello

  You should check with the system manufacturer's support, their documentation online and ask in their forum
  (as applicable) for help. Many systems will have a shortcut keyboard or other methods to control the unit.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Turn off the track and hold PCI-6289

  Hi all

  I use a PCI-6289 on connector 0, I connected a SCXI-1122 module.

  I would use the connector 1.

  In the M series user manual:

  "When you use the connector 1 in parallel mode with SCXI modules that support the track and".
  Here, you must disable the track and hold program. »

  How can I disable the track hold?

  Thank you

  Hi fabpic59,

  This line from the manual only applies if the connector 1 is connected directly to a second module, SCXI, using a mode that the SCXI-1122 does not, so don't worry about this.

  To acquire SC2Mod1/ai0 and Dev4/27 at the same time, add channels to the same task:

  

  Brad

• Disable the pointer in the middle of the keyboard button

  Hi, can someone help me to disable the button located between the G and B the keyboard permanently?  Whenever I type I managed somehow to bump this button and send somewhere my cursor to the top or the bottom of the page...

  Thank you for your help in advance

  Hi Planner,

  Welcome to the community. Please add your system model and operating system when you post on the community. To disable the track stick, click Start, Control Panel, mouse, wait for the Dell touchpad image to appear and click on the picture of the touchpad, click option pointing stick or device selection, you should have an option to disable it.

  Thank you

  Royan

• To access the symbols parolees disable FPGA of host machine

  Hello

  Is there a way to programmatically access the conditional FPGA disable the host machine symbols? I would like to have a host VI who could know if, for example, the bitfile FPGA has been compiled with ENABLE_AO or not.

  solarsd wrote:

  Thanks for the tip. I was about to resort to something like that, but I thought that it would be uneconomic in terms of FPGA resources, I didn't know that it was minimal. Furthermore, you happen to know more in detail how something as in the pobrepablo1 example (btw, thanks for the illustration) would be completed in the material? What is the cost of a Panel control before FPGA? I was getting the impression that this is important - in one case, I could only include the VI my FPGA by changing some controls in the constants.

  You can get an idea of the use of the resources of statistical resources on the use of FPGAS screws. For example, I chose an FPGA random ones listed, and the table indicates that a Boolean or indicator control uses 3 flip-flops and 3 lookup tables, which is almost nothing. A constant uses resources from 0 (no logic). If your conditional constant disable can have more than 2 values, an 8-bit value is not much more expensive. If you have more than 256 possible values for a conditional disable, you're probably something wrong of course, I would not recommend using a string as in the example of pobrepablo, because it would be very expensive. That's as much detail as I can provide.

  solarsd wrote:

  I find such behavior of weird symbol be honest. I realize that these symbols are gone after compiling, but everything is managed in a LabView project, if the symbols must be available throughout. I think changing the symbol value will trigger a recompilation of bitfile FPGA anyway, so the 'source' and the binary files are synchronized. The FPGA "bitfile", as I see it, must have a code of host interacting with the driver card hardware FPGA, i.e. where the State of these symbols must be exposed to the user in my opinion. Just trying to understand the logic behind this.

  You can configure LabVIEW to open a bitfile on FPGA directly, without the VI used to compile. In this situation the VI and bitfile are not synchronized, and the bitfile could have been gathered in a different project with a completely different set of symbols parolees disable. The only way to guarantee that the bitfile is compiled with the right settings is an indicator on the front panel. You can take a look at the bitfile, it is just XML, and it doesn't even include the version of LabVIEW, used for the compilation. You can use a bitfile to a version with one crowd on the other, as long as the bitfile format has not changed. Disable conditional symbols are removed before the VI (in the intermediate form) is given in the Xilinx tools that actually create the bitfile. NEITHER could add more information, such as the value of the disable conditional, to the bitfile XML symbols, but there should be enough demand for them to do and they would then also need to add a mechanism to access this information. I could be wrong, but I don't know that enough people would find useful to a value of this change, when it is so easy to add an element of façade. Still, you could post on the Exchange of ideas FPGA and see if there is interest.

• can I assign vCPU 32 if the physical host is to have 20 hearts that hyperthreading is disabled

  Dear team,

  I just want to confirm I can assign 32vCPUs to a virtual machine, if a physical host is to have total 20cores and hyperthreading is disabled.

  Please let me know assign vcpus VM is depend on the version of ESXi or VM HW version or is it dependent on ESXI licenses

  need your help on the same.

  concerning

  Mr. VMware

  Hey Linjo,.

  Indeed, it's picky

  I just test it. The drop of webclients vCPU 5.5 only shows the number of logical cores available on the selected host.

  Tim

• How to disable the device Alias in the profile of the host

  Hi all

  Could someone tell me how this is acutally done, documentation VMwares seems to go in the circle on the subject:

  VMware KB: Remediation of host profile fails with an error device alias

  Apparently if you have guests who are not identical, but you still want to use the host profiles to configure items on a new host you can disable the device alias but they never say how.  The closest thing is to change the profile of the host and remove the sub profiles do not require you, I found, but it does not work.

  Any help with this would be greatly affect.

  Thanks again,

  Thought that it

  Just wrap everyone is facing it:

  

  Simply remove the Alias Configuration of device in the profile of the host and this error will disappear.  Yet only once if your hosts are not exactly the same.

• Disable the host followed via PowerCLI

  Hi all...

  
  I am looking for a way to disable the host followed via powercli.

  I found one-liner of LucD to get the current state: Get-Cluster | Select Name, @{N = 'Home monitoring status'; E={$_. Extensiondata.Configuration.DasConfig.HostMonitoring}}

  And I know how to turn on/off HA: Get-Cluster | Cluster - HAEnabled game: $false

  But I'm not sure how to combine the two.

  I want to be able to quickly toggle host control without having to disable HA altogether.

  Thoughts?

  Thank you!

  You can use a where clause

  Get-Cluster | where {$_.} Extensiondata.Configuration.DasConfig.HostMonitoring} | Cluster - HAEnabled game: $false

• Disable the autoload software instrument GUI, when you select a track

  OK, so maybe this is the most recent update or I can I have turned it on by pressing a wrong button.  But, in the past, when a track was a software instrument are entrusted to him, to open the instrument interface, you would:

  1 Select the track via the console mixer or main scenario

  2. click on the small button that looks like horizontal sliders in the middle of the channel strip that would open the GUI

  

  However, these last something has changed so do anything when I'm selecting a track via the mixing console or the main timeline, the GUI of instrument software automatically loads and opens.  As you might think, it's incredibly frustrating and certainly not necessary.  Especially when it's a heavier instrument like Komplete Kontrol and must Access files more major libraries.   I want to just go back to the way it was, where I have to click on the button in the image above to launch the GUI.

  Update on the OS and logic, the latest versions of both.

  I'm hoping this is an easy (probably) in trouble, but I can't seem to find any info on what caused it to change to auto load.

  Thanks in advance for the advice.

  Never mind!  I got a PreSonus Faderport plugged, and it was the origin of the problem.  Logic has had another problem of GUI, and as soon as I unplugged the Faderport, things are back to normal.  He followed the question all the time, and I never thought to unplug the unit.

• How to disable the console (conhost.exe) host

  For Windows 7 and Windows 2008 R2 whenever you open a console program, the system opens another process called conhost.exe, to apply windows themes and activate the drag & drop feature in this console window.
  As much as I themes disabled, that I never use drag & drop in the console windows (I promise you :)), which each of this process takes at least 2 MB of RAM and, more importantly, according to sysinternals process explore each conhost.exe process has more than 2500-3000 switches context per second (thus reducing the performance of the entire system) I would like to restore the old behavior of windows Vista/2008 and completely disable the conhost.exe.
  Any ideas?

  Thank you

  Any ideas?

  I know, there are times when this is not possible.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Disable DHCP on the linux host

  I wanted to disable the DHCP server on the network invited only without having to hack the startup scripts.

  It seems that DHCP is defined by the following parameter; $vmdb_answer_VNET_1_DHCP

  The question is: Whence this setting?

  It can be done via configuration/etc/vmware/places, change the VNET_1_DHCP to Yes value to not according to your needs

  grep DHCP/etc/vmware/rentals

  VNET_8_DHCP Yes

  answer VNET_1_DHCP no