Disconnect after...

Similar Questions

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Satellite P100-400: WLan disconnects after seconds of connection

  Hello

  just bought a Toshiba P100-400, but I have a problem with the wireless card, I think.
  It disconnects after seconds of connection Wi - Fi. I have already downloaded the readers of the toshiba site, but it still does the same thing and I can't surf the web.

  Is this a hardware or driver problem?

  Anyone?

  Thank you

  Hello

  Similar problem was with older Intel 2200 BG WLAN card, but it is resolved with newer drivers. Please check the download page of Toshiba or Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2259&lang=eng

  By the way: this problem was not present with all routers. I noticed this just with a few of them. Test of connection with different WLAN routers (different manufacturers).

• Satellite L510 - WLAN disconnects after having ejected the disk USB

  Hey.

  I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.

  What's happening:
  After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.

  I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.

  HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.

  I would really appreciate if someone could provide any kind of fix for this.

  My laptop:
  -Satellite L510
  -Windows 7 64-bit OS
  -pentium (R) dual-core CPU T4500 2.30 GHz
  -2 GB of ram

  Hi captainmarvel,

  Just a simple question: have you tried to update the driver WLAN?
  New driver WLAN, you can find on the official website of Toshiba in order to check this!

  Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
  You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not?

• Y70 70 Lenovo touch guard disconnecting after 5 seconds

  Can someone help me? I have this problem where my laptop lenovo keeps disconnecting after a few seconds. This happens about 3-5 times up to the stop, then I can reuse my laptop.

  As soon as the computer goes to the log in page, I type my password in and then after a few seconds, the screen becomes white a bit and it goes back to the log in page where I need to connect again. I don't know why this happens and there is a program that appears with a white border called followed RT_Driver of face. The program does not display anything and is to see through with a white border and my laptop then goes to the page, sign in again.

  I am running windows 8.1 and I've updated the windows software when it said install updates, but this problem still occurs.

  Please can someone help me. I find this very annoying problem and I've had this laptop for about 1 month. I also have Mcaffee installed on this laptop, so I doubt that it is a virus.

  Hello

  you have the same problem here. Solved by rebooting the machine in safe mode (hold down the SHIFT key while clicking on restart, and then select problems, options, advanced startup options). After the reboot, log into windows. Once connected, start the Task Manager, Startup tab select, right click on the RTFTrack and select Disable. After that, restart normally, and you should be fine.

  My guess is, that Win update had realtek face recognition application in trouble.

  It could be useful, good luck.

• Windows home server disconnects after 5 minutes

  Windows Home Server disconnects after 5 minutes and there is no way to get there otherwise than to restart the device. Any thoughts?

  Hello

  1 - is the home server that is unplug or is it the client?

  2. what happens when you do an ipconfig / renew? Which will renew the connection?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Method 1: Try to perform the boot minimum troubleshooting to find the root cause of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Make sure that return you the computer to a normal startup mode once it's done.

  I hope this helps. Let us know the result.

• PAP2T Dialout disconnects after 15 seconds. Dialin fine...?

  I have the PAP2t, I use Gizmo5 service.

  I can get calls in no problem.

  Outgoing calls, I get a problem - all calls are disconnected after 15 seconds - still the same!  I tried a ton of different settings and reset to the default values, the upgrade of the firmware...  Any ideas?

  Thank you, but I've just fixed.  Had a problem with my (dare I say?) Netgear router - WRV2000.  Latest firmware for the netgear router (from a year or more), all are incompatible.  Had to downgrade firmware for something that worked 1.1.3.9

  Now works like a charm...

• wireless connection is not on. disconnection after 15 seconds.

  Please tell me how to keep my connection on. Wireless lights but disconnects after 15 seconds. How to maintain my connection? Claude

  Please provide the model number of your wireless router?

  Are you having the same problem on any other computer/laptop(if any) wireless?

  What diagnosis normally do you do to solve this problem or it connects automatically after a certain period of time?

• Direct mail disconnects after sending an e-mail and then connect without a restar the computer what is the problem

  Direct mail disconnects after sending an e-mail and then will reconnect until the computer is restared why?

  Hello

  ·        Is it limited only to live mail?

  ·        It's a Windows Live Mail client?

  You did changes to the computer before the show?

  Check the status of the question in the clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also post your question in the forum of Live Mail for assistance:

  Windows Live Mail Forum

  http://www.windowslivehelp.com/forums.aspx?ProductID=15

• computer a disconnect: my computer keeps a disconnect after 5 minutes how to disable this option?

  my computer keeps a disconnect after 5 minutes how to disable this option?

  my computer keeps a disconnect after 5 minutes how to disable this option?

  Check your power options. It can be assigned to turn it off after 5 min. of idle.

  Start button > Contol Panel > Classic view > Power Options > locate the plan that you use currently, click on change Plan settings > (the rest should be self-explanatory).
  After the back if you have questions about power options.

  t-4-2

• USB 3 G modem disconnects after 10-15 minutes.

  The problem is whenever I try to use my 3g phone to connect to internet, it automatically disconnects after a few moments. I searched the windows knowledge base articles and found there is a problem with the modem usb windows driver and they gave an update, but stated that the driver update is beta version.and, so it happens that I installed the update and always internet keeps disconnecting.

  They say that the problem with the driver, it's when a usb modem at a speed higher than 256 Kbps or so is plugged in, it keeps disconnecting because of a bug in the driver. Please help.all my money for the purchase of a device 3 G active will simply wasted.

  The link to the fix is here:

  http://support.Microsoft.com/kb/925681

• TC6 Firmware - call disconnects after 2 hours

  Hi all

  Our client complains that after the firmware update on the endpoints of telepresence (C40, C60, EX90) to TC6.x, there are two questions:

  1 end with TC6.x points will disconnect after 120 minutes to be connected to any appeal initiated by the remote end.  They will not cut the minute 120 if the TC6.x Unit has initialized the call.

  2 end points with TC6.x cannot connect to units MXP running F6 or earlier.  Since we MXP Codec Software F6 and F5 this is causing problems with the calls point to point.

  They have units with the TC5.1.6 software which have no problem at all. The only thing among others as the routers and switches is a VCS controller.

  Anyone has any ideas on what is the cause?

  Thank you

  John

  In TC6, we turned silently on TCP KeepAlive for the session h225 running with the default time of linux tcp_keepalive_time of 7200 seconds.  That would probably explain the disconnection to 120 minutes which sees the John after moving from TC5.1.6.

  I would also say that if this is the case, there is something which is tcp to the current between the two devices.  The firewall is also my first thought.  Perhaps WAAS on a router?  Sometimes you can get a clue that this is occurring by comparing the tcp ack/seq/windowsize header to see if it is different between the sending to the receiving side for the same package.  Something like 'tcpdump-s0 w /tmp/h225.pcap port 1720' root must limit the collected output.

  The TC6 troubleshooting located here would be a good reference in newspapers and tcpdump to use for troubleshooting signaling related issues:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC6/troubleshooting_guide/tc_troubleshooting_guide_tc60.PDF

  The example uses this doc does not filter the traffic and John you do not want to limit the output of tcpdump only for signalling interesting to avoid problems with the size of the OCAP collected file.

  We have a bug open better control KeepAlive on the session h225 (CSCub20591) but not clear if/when it will be executed and for now if there is something that is expire tcp sessions in the network, changes will be made here to avoid this problem.

  For the 2nd question, I'm not aware either a problem with older MXP but your approach Martin to try a later version of the software would also be what I would recommend.  If you need to solve problems with old software MXP TC6, the same troubleshooting guide h323 newspapers are where you want to focus on to see where in the handshake the call fails and compare this output between TC6 and TC5.1.6 as to what has changed that can have an impact on this.

• Wireless disconnects after a few minutes, restart result BSOD

  Hello, all of a sudden my wireless connection keeps disconnecting after 5 minutes, and then I restart my computer it will donw with a screen BSOD saying driver_power_state_failure.

  There are a few available mini dumps well as I write.
  I have a Lenovo laptop, T420 with intel centrino wireless 6205 r, running windows 7.
  Can I attach the mini dump here somehow.

  Hi, Germain,.

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

  I wish that you disable the Windows Firewall as well the antivirus temporarily.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Let us know the status.

• loss of connection; My pci wireless device disconnects after rest. How can I stop this from happening

  My pci wireless device disconnects after rest. How can I stop this from happening

  If it's a laptop, clear the check box of - connect to save the battery in the Wireless Control Panel.

• Whenever my id of disconnection after system reboot

  Whenever my id of disconnection after system reboot

  Hello

  Please ensure that you have the latest version of the installed Creative Cloud application

  http://helpx.Adobe.com/creative-cloud/release-note/CC-release-notes.html

  We also have the solution for him having to log on each product launch

  http://helpx.Adobe.com/creative-cloud/KB/unable-login-creative-cloud-248.html

  You can view the creative cloud sign me or asking to connect you several times

  Let us know if this helps!

• VM NIC disconnects after a stop and restart

  ESXi 5.5.0, 1331820; vCenter 5.5 device 1476327. I noticed a problem with VM NIC disconnection after the stop of vcenter. Last week, I shut down a machine to clone virtual w2012r2 and restarted. No network. Look in vcenter and of course it is disconnected. Looks like that has happened since I went to 5.5 (new installation). The virtual machine shows no change event to account for something happening to the network card. VMXNET3 adapter.

  Any ideas?

  VMware.log shows this interesting tidbit.  ethernet0.startConnected = FALSE

  This led me to the other setting that I had not checked: connect to power on. Oopsy daisy. Me solved problem own stupidity.