Disconnect Linux guests and Windows in Win7x64 host of sound

Similar Questions

• Help to "problem"-WRT54G, Linux, Unix and Windows ".

  I have a Linksys WRT54G rev 6, firmware version v8.00.7 011, July 27, 2009.  My ADSL modem is a modem DSL from Westell G90-610014-20 revD.  My home network is 'predominantly' Windows wireless clients and a wireless printer, who don't have no problems or issues between them.  These 2 PC can see each other, share files, print, see internet, etc.  My PDA Smart Phone connect wireless... the grand-kids PSP jumps in full and they are all happy.

  Then, a few steps in my box... Multi-boot with Win7 Pro 64-bit, Windows Vista Home Premium 64-bit, Ubuntu 10.04 LTS Desktop Edition 64-bit, OpenSolaris 2010.03 snv_134 and some other OS' are.  It is connected to the #2 router's ethernet port.  This PC connects to the internet very well with all OS' are.  When I start to the top of any OS "Windows" on the subject, I can see the entire network, connect, fileshare, printing, etc. Life is beautiful...

  When this PC is displayed under Ubuntu, OpenSolaris or Solaris - I have internet and I can print.  I can see 'only' the router, modem and printer (and not the other PC) I can ping the router, printer and modem (not the other PC through services called) or intellectual property.  I can not connect, fileshare, etc..  In these OS' are I Samba, CIFS, Wins, etc. installed.  My windows clients cannot see my PC either, BUT I can ping and mount the fileshares to this PC via the IP (not via the designated services. If I boot one of this Windows Linux clients, this PC can see my PC with the IP address and name services.  Linux to linux, he'll see, connect, share.  I had 'other recheck my config on Samba, CIFS and wins... and nobody can find any problems there.

  I see 'all' clients in the Client DHCP of the router table.  The router is dynamically assign addresses without any conflicts.  The router I ping the Linux/Unix/Windows (my) box.  It cannot ping my windows wireless clients.  All "client" devices have DHCP enabled with autoconfig.

  At first I thought I had a double NAT courses so I filled the modem and the reconfig'ed my router to the router to the modem of the equation.  (Now just a stupid modem.)  Time of Internet connection are now vantastic... improved my time to download updates and upgrades and network load is down... BUT, the same problems/no change.

  I turned "logging" the router, but as of yet, I have not found where those who connect so I can revisit!  I wonder if I have something to do between the wire &... but that "should" be transparent shouldn't it?  I don't know if "everything that he must have spent, or if something is filtering or stop"it "(?)"  I'm really running out of ideas on what to check, test, change... on what "might" happen.

  Help!

  Thank you... 'All' went through on my desktop and my network and I was doing the wrong assumptions.  The last PC for installation on this network was my office, so I assumed that it connect to my laptop, it was a problem with the desktop computer.

  What I've discovered, is that it "is" the problem of the laptop (on the contrary), somewhere in the services of the Windows Vista Home Premium network or settings, device drivers, etc..  "Is not" (or at least now) a router or hardware problem.

  He kept bothers me, I couldn't ping my laptop from my PC, or my router.  I had no access to customers 'other' Windows until late last night, when I found that 'they' have connection problems and ping the laptop too!  I guess...

  I started this laptop on a Ubuntu 10.10 Desktop Edition LiveCD - and then could ping to it to both my desktop PC and my router, configuration this laptop in wireless (same device) and connect to the same wireless network.  Sort, which confirms that this is not a hardware problem on the laptop.  It confirms that it is not a router or network problem.  It narrows down my path to how 'Vista' networking services, device drivers, settings, etc. from Vista. The hunt continues, but this thread is "finished".  The problem lies elsewhere...

• 9 workstation and Windows 98 crashing host

  MY computer is Windows 8 RTM and 9.0 Workstation

  When you try to create a new Win98 machine and trying to turn on a Win98 machine I was using with Workstation 7 my computer abruptly restarts.

  When trying to create a configuration of the new machine 98 says check your computer checks on 5 or 6 items successfully and on the next screen restarts before one can read what is said.

  It is probably a bug in Workstation 9 about the SMEP on Ivy Bridge systems.  Go to VM->-> processors, settings and change the execution mode privileged of Intel VT-x/EPT.

• Linux host freezes with 10.0.6 Workstation and Windows 7 comments

  Hello

  
  

  I am now quite desperate because it is really preventing me from doing my job.

  
  

  I deleted Windows and I installed a fresh Kubuntu 14.04.02 (LTS) with 64 bit under my desk. I also installed VMWare Workstation 10.0.6 to run my development machines. I am now having serious problems:

  
  

  Every now and then, my full host is the gel if I'm running a Windows 7 virtualized on my workstation. The mouse only moves very slow and all the windows are very (!) slow response. My CPU monitor list all 4 CPU to 100%. If I managed to open the monitor system (or top on the console), I can see that vmware-vmx and kwin burn most of my CPU resources. If I wait 10 seconds to a minute, the system becomes usable. Now CPU goes down to normal. But as soon as I start to move a window (any one), the thing is happening again.

  
  

  Symptoms in short:

  • HOST: Linux Kubuntu 14.04.02 (x 64) on Intel i5 CPU with 8 GB of RAM and running on SSD (ext4).
  • COMMENTS: Several Windows 7 (x 32) several software running. Assigned 1 CPU and 1 GB of RAM. It comes on several guest computers.
  • Every now and then, all my CPU taking nearly 100% 4. The host CPU is used by vmware-vmx and kwin (used above) processes. Sometimes after 15 minutes, sometimes directly after turning on the prompt. No idea on reason.
  • Host of mouse, Windows, and OS works very very slow.
  • Meanwhile, Windows 7 virtual machine is inactive! Energy saving or screen saver are all off!
  • If I manage to run Taskmanager guests, I don't see an action (sometimes TaskManager itself using 60% of CPU!). Looks to me that the host is down, not comments!
  • My host is running an SSD (256 GB).
  • VM log file does not show something during this phase.
  • VMware.log attached.

  
  

  What I tried:

  • I disabled 'Accelerate 3D' for all my virtual machines.
  • I have re-installed VMWare Tools on the guest computers.
  • I run VMWare workstation with vblank_mode = 0/usr/bin/vmware
  • I recreated the machine with less hardware as possible and recharged the .vmd.
  • I converted to virtual prior to the current format format disk image (VMWare asked me to the front step, I said 'yes').
  • I have inserted a separate network card (NIC) and disabled the network card that is embedded in the BIOS.
  • I disabled the onboard graphics in the BIOS and added a card NVIDIA GeForce 8400 PCIx16 (using NVIDIA binary drivers provided by Kubuntu).
  • I removed the CD-ROM of the virtual, Audio computer, diskettes and any unused material.
  • I have tried using cpulimit strangle vmware-vmx and kwin on my host, but without success. System remains unusable in this situation.

  No success at all.

  Is there anything else I can do to put my environment in a productive state? You can imagine that this always happens in the worst situations :-(

  Any ideas?

  Thank you!

  I found this page:

  Disqus - Arch Linux becomes insensitive to khugepaged

  It seems that this did the trick!

  I ran (as root):

  never echo >/sys/kernel/mm/transparent_hugepage/defrag

  madvise echo >/sys/kernel/mm/transparent_hugepage/defrag

  Since then, everything works fine. :-)

• Secondary disk between Linux and Windows guests share

  Hi guys,.

  I have a requirement to have a guest Windows and Linux comments share the same disk (formatted in NTFS) and the two systems need full access to the shared file system.

  What I've read, it is possible in some cases, such as the Windows Server cluster.

  Has anyone tried this with Linux and Windows?

  
  Thank you

  What I've read, it is possible in some cases, such as the Windows Server cluster.

  Windows uses a cluster without sharing, wherever a single node has access on the drive shared at the same time. Microsoft does not support concurrent access to an NTFS file system, with the exception of Hyper-V.

  André

• Free virtualization software takes supported Windows 7 as operating system host and Windows Server 2003 as a guest operating system?

  People,

  Hello. I need to install the Windows 7 host virtualization software, and then install Windows Server 2003 as a guest operating system.

  VMware Workstation supports Windows 7 as operating system host and Windows Server 2003 as a guest operating system, but it's not free download.

  People know that supports virtualization software free Windows 7 as operating system host and Windows Server 2003 as the operating system invited?

  Thanks in advance.

  As I said in your previous post, VMWare Player is a free download and does not support Win7 as host and Win2k3 as a guest.  VMWare Player is also included with VMWare Workstation, you can imply that most of the time something that supports VMWare Workstation as a guest operating system is also a guests supported for the reader.

  And unlike previous versions, player 3 includes the ability to create virtual machines base.  For many people, especially those who are starting just in virtualization, player is sufficient.

  VMWare Workstation, although not free, can be installed as a 30 day trial.  After the trial, you can not start your virtual machines in my computer, but because the player is included in the installation, you can still run your virtual machines in the drive without having to uninstall anything.  So just install Workstation.  After the trial expires, if you wish that the advanced features of the workstation, then buy it.  If not, just continue to use the drive.

• What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

  People,

  Hello.

  Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

  I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

  I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

  People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

  Thanks in advance

  Hello

  IMHO, I think that Workstation is the vmware product just for you, the requirements

  It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

  Virtually noob blog

• DHCP server on a VM guest that is connected to a router (in AP mode) works on the host Linux (Fedora), but not on the host Windows (XP)

  I'm in dual boot Fedora and Windows XP, and configure a server vmware 2.0.0 122956 on both.

  Here is my config:

  Internet - Modem - vm_gw - vmnet1 (host) - vm_dhcp - router Wireless ADSL - computers laptops

  There are two physical network adapters on my host.  On the virtual machine that connects to the internet (vm_gw), I have one of the network adapters physical bridge (as vmnet0) to dial the ADSL modem and set up a network of hostonly (vmnet1) share the internet connection of the VM on the host and other virtual (vm_dhcp) computer.  On the virtual machine which also shares the internet connection to a wireless (vm_dhcp), I fill the other physical network (like vmnet2) adapters to connect to a router (in AP mode) and have a configuration of DHCP server on it and set up a hostonly (vmnet1) network to get its internet connection of vm_gw.

  I installed proper routing on my host computer and two virtual machines and this config works very well on my Fedora host.  However, the DHCP installation part does not work on my Windows XP host computer.

  The difference between my host Fedora and XP is on Fedora host, can I have two network adapters physical activated with a config 'empty' (to use DHCP or static) as in:

  DEVICE = eth0

  HWADDR = 00:11:22:33:44:55

  ONBOOT = yes

  TYPE = Ethernet

  and

  DEVICE = eth1

  HWADDR = 55:44:33:22:11:00

  ONBOOT = yes

  TYPE = Ethernet

  And there is no conflict on the physical network adapters between the host and the virtual machines.

  However, on XP host, I HAVE to configure the network adapters physical to use DHCP or static.

  If I place the physical network adapter (on the XP host) who will fill to vm_dhcp using DHCP, it will get an IP address from the wireless router and the DHCP server on vm_dhcp doesn't seem to be able to 'find' the wireless router and assign an IP address that him.

  Then I tried to configure the physical network card to use the static IP address (and assign it a fictitious IP address e.g. 192.168.123.1/255.255.255.0) to see if it would work, but it does not work either.

  Then I also tried to "simulate" the 'empty' network on Fedora config using regedit and delete (192.168.123.1/255.255.255.0) IP address on the network config and it does not work.

  Well, I'm out of ideas and I came here as a last resort.  Any suggestion/discussion is welcome.

  Thanks for reading.

  WLPL

  Simple question, I know, but is the Windows XP firewall is enabled?

• Unable to ping my Guest OS-Linux - 5.8 (IP/hostname) of Host-OS: win-7

  Hi all

  I'm using VMWare workstation-8 on my host OS: win - 7 laptop with guest operating system: Linux OEL 5.8. But I can't ping my guest operating system (IP/hostname) of win - 7. I tried with all the bridge, NAT, host only with WMCI (active) options. I'm able to share the Folders (hgfs) between the guest os and host.

  I want to access a few Oracle application of middle ware (running on reviews: Linux os) through Win-7 host operating system.

  Any suggestions would be very helpful.

  Machine: DELL XPS

  SE host: Windows-7 (64-bit)

  Guest operating system: Linux OEL 5.8

  Thank you

  Remy

  I changed to the bridge and enable (check) "State of the repeated physical network connection.

  Now I am able to ping and access Oracle Applications running on the guest operating system of the host operating system.

  Thank you

  Remy

• VMware in network bridge: Freezed host with WS6.5 and Windows Vista x 64 or Windows 7 x 64 host operating system

  Hello

  I have a problem with VMware Workstation 6.5 on 64-bit Windows host.

  First, I installed VMware Workstation 6.5.0 118166 on my x 64 Windows Vista SP1 host, and I had a weird problem when working with network on my host system, no matter there is a guest running or not. The problem is when I try to connect/disconnect from VPN connections or plug/unplug my network from my LAN socket cable, etc., host OS freezes suddenly with no answer to anything whatsoever, no movement of the mouse, without strikes, nothing.

  After sometimes, I installed Windows 7 Beta 7000 x 64 on my computer and have no problem with it until I installed VMware Workstation 6.5.0 118166 on it: the gel problem once again. I thought it may be a problem on this specific build of VMware, so I downloaded and installed the latest version (6.5.1 126130) on my system, but the problem persists.

  After playing with a large number of settings, I find that if I delete the service "VMware Bridge Protocol" of my network card, the problem does not happen.

  I searched the forum but I can't find anything like that, so I wonder if anyone can help me with that?

  My network card is an edge ' Realtek RTL8168B/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) b ' on my card mother Gigabyte GA-MA770-DS3.

  Other features of the system:

  AMD Athlon 64 X 2 5200 + CPU

  6.0 GB of RAM

  Seagate ST3500320AS SATA HARD drive

  nVidia GeForce 8600GT 512 MB video card

  Thank you.

  Shadmehr wrote:

  My network card is an edge ' Realtek RTL8168B/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) b ' on my card mother Gigabyte GA-MA770-DS3.

  Which driver version you have installed for your network (NIC) card?   This link shows a version of driver Vista/Win2008 6.216 (dated 2009/02/26) available.  The same driver should work as well for Win7.

  If the above does not resolve the problem, view the properties for the NETWORK adapter and temporarily disable all 'Task Offload"or other characteristics"discharge"to see if that helps.

• How to get a virtual camera to work? the host is Lenovo W550s running CentOS 7.1, guest is Windows 7 Professional

  With VMware Workstation Pro 11 and now 12 never got 'virtual camera' to work.  Do not find documentation, only advice, this should work, exist.

  Active host computer is Lenovo W550s running CentOS 7.1.  Camera works very well in host in CentOS in the cheese.  As a removable device, it appears as "Chicony Camera integrated".  But appears later in the guest PC Window 7 Professional.  VMware Tools in the comments are the latest version, now for VMware Workstation Pro 12.

  Any chance install USB driver for camera (not found), so not excited to get 'virtual camera' to work.

  Intended use is GoToMeeting.

  What happens when you connect the device to the prompt?

  I did a test with my laptop HP - Win7 host - player 12.0

  Guest - VMware Tools Win7 updated at the latest.

  Built-in laptop webcam shows as a "Webcam Chicony HP HD"

  First image - tooltip for the player as I hover.

  Right-click the menu actions.

  After selecting the connection (unplug the host)

  When the guest saw the unit it is passed to Windows Update to search for a driver... and he did take a few minutes... but he was installing finally successfully.

  Windows features in the comments.

  And finally a picture taken with the webcam works inside the guest.

  Rob

• running Linux rather than Windows as host

  Hello

  I'm trying to start learning of VMware and I wonder which version of the operating system, it is best to run it as a host for VM workstation? Inside of the workstation, I'll run 2 instances of ESXi machines so I'll try to save some resources with Linux. Don't you think it's just if I install Linux instead of Windows 7? I really save you 1 GB of RAM, or not? (theoretically for 64-bit Linux, it's 384-512 MB of RAM and Windows 7, it's nearly 2 GB of RAM)

  The bottom line is made the effort running Linux rather than Windows is worthing? Because it's a pain even with Linux.

  Thanks in advance for your advice!

  Catalin

  I think that you run your host operating system with what you are comfortable with.  My choice would be Windows 7 x 64.  ESXi running as a virtual machine in my computer would work fine, just follow a few best practices recommendations.

  Nested VMs running

  The VMware products and material assistance to virtualization (VT-x/AMD-V)

  Troubleshooting problems Intel VT - x

  http://KB.VMware.com/kb/1030283

  http://www.Vladan.fr/how-to-install-ESXi-4-1-inside-of-VMware-Workstation-7-1/

• My guest can not see the host or cannot communicate with the network, networking is set to bridged, host operating system is Windows XP sp3

  Hello from Spain,

  I am running vmware workstation 6.0.2 on a windows xp sp3 with two virtual machines, a xp and a windows 2003 Enterprise edition. Non of my guests can't see the computer host or other computers on the LAN and host when I click on show "Entire network", "Microsoft Windows network" I see that the domain for which the guests but not the domain controller when I double click the icon of the domain. Networking is set to connected by a bridge to the NETWORK adapter connected to the LAN.

  Thank you.

  Hello

  No message in the post

  route print at the command prompt to the host and the guest and send report

  Prakash

• Mysterious FF 5.0.1 for Linux and Windows

  Hello.

  Mozilla has released, on 11 July, FF 5.0.1 to bring increased compatibility with Mac OS X Lion. You said:

  Please note: users on Windows and Linux do not need and will not see the updated offer.

  Yesterday, I noticed that FF 5.0.1 for Linux and Windows are available.

  However, I can't find any credible information on the Internet which is all about. "Notice of security for Firefox", "The Mozilla Foundation security advisories" and 'US-CERT current activity' pages did not mention of FF 5.0.1 for Linux and Windows at all.

  Could you please shed some light on this particular and still mysterious version?

  Thanks in advance.

  So that all OSs have the same version number of Firefox. Something on the update server, I think. You seem to have already Firefox installed 5.0.1. See find your version of Firefox

• How can I install Linux (Ubuntu or Kubuntu) and Windows on the same HARD drive?

  Hello world

  I have Toshiba L20-148 and I have the Toshiba product recovery DVD and I have the DVD Ubuntu

  I'm only able to install Linux or Windows XP Pro I have with the recovery DVD

  and the only way I know to install both together by installing linux and windows... but every time I try to install windows, then factory data recovery, it is just the whole HARD disk and install windows only...

  any help?

  Hello

  As mentioned that the Toshiba Recovery CD contains image and files during the installation of the OS on the HARD drive or the partition will be formatted. In this case all data will be deleted.
  Therefore, you must create a second partition for the use of Linux. But be careful. Linux uses the special file format. Partition Magic 8 contains and supported the creation of the Linux partitions.

  So if the new partition has been created, you can install the Linux